Vendor profitablity in COPA

Hi Experts,
I am working on a retail project . they want to implement vendor profitablity in COPA . But vendor is not coming from ECC . How can I add vendor in COPA data ?
Pls help !!
thanks
Pankaj

I have worked on COPA, both functional in R3/ECC and BW technical, for my current employer and former employer. Both were completely different because COPA comes as a blank slate and is configurable in R3/ECC. Therefore, it's different in BW too.
You won't be able to get a unique vendor from material and plant, because a material can be sourced from multiple vendors. Neither the MARA (Material Master) or MARC (Material Assignment to Plant) have a single vendor on them. In fact, vendor isn't on either table because a material can be sourced by different vendors.
Do you have an FI-CO functional consultant that you can speak to? They should be able to provide the link back to getting the vendor from the COPA data. Otherwise, I could try to assist but would need to know what other columns of data you have available from COPA that could give me an idea of how to link back to vendor.
Edited by: Dennis Scoville on Jul 29, 2009 12:43 PM

Similar Messages

Problem in Calling a smartform in a driver program(SE38)

Hi,
      I created a report in SE38 and i have a 5 CHECK Boxes. i called a smartformsin that program.
My problem is if i check the 5 check boxes the layout should show 5 copies.
if i check 3 check boxes the layout should show 3 copies. e.t.c.
Edited by: vijay krishna on Jul 12, 2008 9:47 AM

Hi amit,
        thanks for this code.
But i am using this code. i have 3 check boxes as vendor , gatepass , office copies
if i select this 3 check box i want the three copies of there repective copy heading like in first page Vendor copy , in 2nd copy gatepass copy e.t.c.
w_formname = 'Z_MM_REP_GATEPASS'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = w_formname
    IMPORTING
      fm_name            = w_fm_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
call function w_fm_name
exporting
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             = tdcopies
USER_SETTINGS              = 'X'
    s_bukrs                    = v_bukrs
    s_mblnr                    = p_mblnr
    s_mjahr                    = p_mjahr
    s_data                     = p_data
    s_lifnr                    = v_lifnr
    s_nrgp                     = r_nrgp
    s_rgp                      = r_rgp
    s_gp                       = r_gp
    s_gpcc                     = r_gpcc
    s_chal                     = r_chal
    s_truck                    = p_truck
    s_date                     = p_date
    s_freight                  = p_freigh
    coun                       = var
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
tables
    s_itab                     = ITAB[]
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Edited by: vijay krishna on Jul 12, 2008 1:17 PM
Edited by: vijay krishna on Jul 12, 2008 2:37 PM

Mac OS X 10.3

Not linking Oracle properly:
- Linking Oracle
rm -f /Oracle10g/app/oracle/rdbms/lib/oracle
gcc -o /Oracle10g/app/oracle/rdbms/lib/oracle -L/Oracle10g/app/oracle/rdbms/lib/ -L/Oracle10g/app/oracle/lib/ /Oracle10g/app/oracle/rdbms/lib/opimai.o /Oracle10g/app/oracle/rdbms/lib/ssoraed.o /Oracle10g/app/oracle/rdbms/lib/ttcsoi.o /Oracle10g/app/oracle/rdbms/lib/defopt.o -lperfsrv10 /Oracle10g/app/oracle/lib/nautab.o /Oracle10g/app/oracle/lib/naeet.o /Oracle10g/app/oracle/lib/naect.o /Oracle10g/app/oracle/lib/naedhs.o /Oracle10g/app/oracle/rdbms/lib/config.o -lserver10 -lodm10 -lnnet10 -lskgxp10 -lhasgen10 -lcore10 -lskgxn2 -locr10 -locrb10 -locrutl10 -lhasgen10 -lcore10 -lskgxn2 -lclient10 -lvsn10 -lcommon10 -lgeneric10 -lknlopt `if /Oracle10g/app/oracle/bin/smartar tv /Oracle10g/app/oracle/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap10" ; fi` -ldm10 -lslax10 -lpls10 -lplp10 -lserver10 -lclient10 -lvsn10 -lcommon10 -lgeneric10 -lknlopt -lslax10 -lpls10 -lplp10 -ljox10 -lserver10 /Oracle10g/app/oracle/has/lib/libclsra10.a -ldbcfg10 -locijdbcst10 `cat /Oracle10g/app/oracle/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /Oracle10g/app/oracle/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /Oracle10g/app/oracle/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /Oracle10g/app/oracle/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `if /Oracle10g/app/oracle/bin/smartar tv /Oracle10g/app/oracle/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo10"; fi` -lctxc10 -lctx10 -lzx10 -lgx10 -lctx10 -lzx10 -lgx10 -lordimt10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lsnls10 -lunls10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /Oracle10g/app/oracle/lib/sysliblist` -L/Oracle10g/app/oracle/lib -lm `cat /Oracle10g/app/oracle/lib/sysliblist` -L/Oracle10g/app/oracle/lib -lm
ld: /usr/lib/crt1.o relocation overflow for relocation entry 6 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/crt1.o relocation overflow for relocation entry 16 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/crt1.o relocation overflow for relocation entry 31 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 0 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 5 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 14 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 15 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 16 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 17 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 18 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 19 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 20 in section (__TEXT,__text) (displacement too large)
ld: /usr/lib/gcc/darwin/3.3/crt2.o relocation overflow for relocation entry 21 in section (__TEXT,__text) (displacement too large)
make: *** [Oracle10g/app/oracle/rdbms/lib/oracle] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'dm_on ioracle' of makefile '/Oracle10g/app/oracle/rdbms/lib/ins_rdbms.mk'. See '/Users/oracle/oraInventory/logs/installActions2004-10-04_09-59-46AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Help.

LGBD,
You cannot download a full version of OSX; Apple only offers updates to an installed OSX of the same version number.
MacOS X 10.3 Panther was released as an all-new system and thus available only as a retail CD or installed on a new computer. You can then download 10.3.x Updates all the way to 10.3.9.
Your best option is to find a copy of Panther on eBay or possibly vendors that sell copies like OWC.
http://eshop.macsales.com/shop/osx-center/software-and-more/
If your computer meets the requirements of Tiger/10.4, consider buying it instead of 10.3.

Netweaver identity management comparison

Hi
I would like a comparison of Identity management products including Netweaver Identity management.
please help me with any whitepaper or discussion document.

Hi Biswajit,
if you search for Gartner and user provisioning you will find their often quoted magic quadrant. Unfortunately the document is high-level with a focus on sales and information about SAP IdM is just outdated. You will find mainly German information on kuppingercole.com. Interesting are some scenarios like in a PoC where vendors have to cope some tasks - but I couldn't find a comparison which includes SAP IdM.
It just depends on the focus you have on Identity Management. I see advantages for SAP IdM in a flexible data management and good provisioning rules in a heterogenous environment. With the 7.1 release you will get pretty workflows in the SAP Portal. It's also recommended as a replacement of the CUA. Other vendors may have a focus on authentification or use a Virtual Directory instead of a database.
Best regards,
Nils

COPA - Third Party Drop Ship Returns - Vendor Discounts

Hello -
This is challenging so I hope some of you can help me please!
Can anyone explain to me how vendor discounts work in copa as they relate to third party drop ship returns? We use net vendor invoices where discount is taken at time of vendor posting and offset by clearing account.
We have several scenarios where we cannot reconcile FI and COPA for COGS account because of the discount on the vendor credit memo.
An example:
We have created the sales order and purchase order for the process. Then we do a migo and a miro from the vendor.
The vendor document has a discount of 1%, so if it costs $100, here is the accounting:
MIGO -
dr. cogs 100
cr. gr/ir 100
miro
dr. vendor discount clearing 1
cr. cogs 1
dr. gr/ir 100
cr vendor 100
then we bill the customer.
Copa at this point gets hit with 99 debit to cogs value field (100 -1 =99)
then we process the customer credit memo request.
Then we process the vendor miro credit.
dr. cogs 1
cr. vendor discount clearing 1
dr. vendor 100
cr. gr/ir 100
At the time the vendor credit memo is posted, sap inserts a new copa line-item on the customer billing document with $1.00 debit to copa.
then we reverse migo
dr. gr/ir 100
cr cogs 100
And then we bill the customer credit memo, which creates another copa document that credits copa with $99.00. why doesn't this create a copa document of -$100. this would help tie out copa and fi.
If you go through and look at all cogs postings on FI side, the credits and debits = 0
If you go through and look at the cogs posting in COPA, the credits and debits = 1
therefore, fi and co don't tie.
please give me any ideas that might help me.

Hi Valerio,
Have you found any solution for your issue?
We have a similar problem with 3rd party drop ship orders and COPA. Cost of Goods Sold Drop Ship is being charged when we use MR11 to clear GR/IR account. This is causing reconciliation issues between COPA and the General Ledger.
Let me know if you have come across any clues?
Thanks.
Ram

1099 Printout 2 copies for each vendor

SAP Gurus,
I am trying to run 1099 forms, I am using tcode S_P00_07000134 - Generic Withholding Tax Reporting.
When I run program I only see Copy B, which is for the vendors records, I will still need Copy A in order to send to Federal. Does anyone knows the process? We implemented all the OSS notes possible related for 2008, but it appears that SAP scanned double copies in one page both copies are Receipient.
When I run tcode I don't even get form 1096 which is part of 1099 process.
Is anyone having the same issue?
Edited by: Frank on Jan 28, 2009 10:49 PM

Hi manjula
In order to get total for any key figure .... for that key figure at the query level in the calculation tab there will be one box like calculate result as there u give sum or average accroding to ur purpose... then it will display the total or average accordingly....
the key figure when used average for result shows average of all record conrtibutions but
In order to display the percentage of each vendor from total u can use
Percentage Share of Result (%CT)
%CT<Operand>
Specifies how high the percentage share is in relation to the result. The result
means the result of aggregation at the next level (interim result).
%CT Incoming Orders specifies the share of incoming order values of each
individual characteristic value (for example of each customer) in relation to
the characteristic's result (for example, customer of a division).
Regards
vamsi

MN05: setting the number of printer copies for the whole range of vendors

Hi all,
by t.code MN05 I can set the number of copies of the MM documents printed the FIRST TIME. I can do it for doc.type or vendor.
I can't set the number of printer copies for the whole range of vendors. Should I do it for each one of them?
Thanks
Gandalf

Unfortunately,
setting for document type, it doesn't work for all range of vendors.
Setting for document type, in the field "PartF" I've put in "OA". Could it depend on it?
you do for document type and then it will cover all range of vendors.
If you want prints for a specific vendor then set condition recrod for that vendor only.
regards

SAPSCRIPT, HOW PRINT MORE COPIES (Example: Customer..., Vendor... ecc)

Good morning,
i have a problem, i have built a complete sapscript, but i have to print 2 copies, one for the vendor, one for the client changing one label into the sapscript ("copy for vendor", "copy for client").
In other words, when the client print one copy of the sapscript, i have to duplicate the copies changing only the label that specified who is the recipient of the copy... it is possible do that??
Thanks!!
Marco

Hi,
Check with this
loop 2 times.
if sy-index =1.
heading = original
elseif sy-index =2
heading =copy
endif.
open_form
write_form
close_form
endloop.

Vendor discount value from FB65 to COPA is getting updated in wrong value filed

Hi Experts,
As per the Business requirement vendor discount during the credit memo should be updated in COPA report. some times system posts the vendor discount value into VVXXX value filed as per the configuration done in PA transfer structure. some times its getting updated with another VVYYY value filed. It should update only single value filed as per the PA transfer structure.
It will be good if you can share your thoughts on the above issue.
Regards
Sambasiva

Hi Samabasiva,
Do you mean system is posting the discount value in FB65?
May I know what Accounting Entry is posting with discount for Credit Memo?
And also is there any Exit or Substitution Rules are Implemented.
Regards
Srinu

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

PO texts from vendor master

Hi,
when I create a PO using a vendor, after filling field Purchasing Org., Purch. Group and Company code, system copies a text but I don't know from where.
In PO down the header texts I can read "Text adopted from Vendor Master (Purch.org.-spec.test text )", I cannot find it in vendor master....
Could You help me ?
Regards

Hi,
In MK03 please open your vendor go to purchasing data and click on extras on the menu bar, and select text, here you will find purchase order texts, hope this is what you were looking for.
Also check the PIR.
Regards
Shailesh
Edited by: Shailesh Rajan on Jun 28, 2011 3:07 PM

Error while doing Return to vendor (122) against PO through QA11

While doing Return to vendor (122) against Purchase Order through QA11 we are getting the error as Deficit of PU GR quantity 20,000.000 TH: RPO1010 FCHN 007A.
Steps we are followed.
1. Created Purchase for Quantity 20 TH with activation of Unlimited Delivery.(TH Means UOM (Thousand)
2. GR has taken for 20,000 TH instead of 20 TH because of Unlimited Delivery as activated.
3. Usage decision as given total Quantity accepted based On Inspection Lot generated at MIGO.
4. Stock has come to Un-Restricted.
5. For Short fall of Purchase Order Quantity Increased the PO qty to 20,020.
6. For Return to vendor we transfer the stock from Un-restricted to Quality by MB1B Mvt type 322.
7. While Transfer Inspection Lot has generated.
8. Based on that Inspection Lot we try to do return to vendor through QA11 against the same Purchase Order.
While doing the Last step we are getting the above error.
Pls. Kindly look into this and tell me whether this steps are correct, if correct any settings needs to be done to over come the error or tell the Correct Logic to return the Material.
Thanks & Regards
Sathish
Ph:9940518715

My thoughts on this is that the original PO was for 20TH. therefore you will only be able to return 20TH against it regardless of what you receipted. This is because SAP copies from the original PO document for the return and not the GR material document.
You can try to edit the original PO and increase the amount to 20,020 and try again. But I don't think you'll be able to edit that since it was fully receipted.
Your probably going to have to do a return for 20TH and then a separate, stand-alone return for 20,000 TH.
Craig

Custom vendor,freight vendor in case of import purchase order

Hi all,
I make the purchase order for imported goods and provide the insurance vendor,custom vendor & clearing charges vendor in PO itself. But when i was go for MIRO for planned delivery cose system show me message as:
Different invoicing party 1000055 planned for del. costs item in PO
4500000280
    Message no. M8287
Diagnosis
    You entered an invoice for delivery costs.
    In a delivery costs item for purchase order 4500000280, the invoicing
    party is 1000055. You are now posting the invoice to 1000040. This can
    be for one of two reasons:
    o   You entered 4500000280 in the field Purchase order, and 1000040 in
        the field Invoicing party.
    o   You entered a multiple allocation. The first item refers to a
        purchase order with invoicing party 1000040. Another item refers to
        purchase order 4500000280. The system copies the invoicing party
        from the first delivery costs item to all items, in this case
Note:
The category of this message can be changed in Customizing for Invoice
Verification. This means that you can receive a message as an error
message even though it is defined as a warning message in the standard
system.
The following documentation deals with the case applicable to the
standard system only.
cedure
Check your entries and make any necessary corrections.
If you want to allow delivery costs with different invoicing parties to
be selected, change the system message to W in Customizing. To do this,
you work through the step Define Attributes of System Messages in the
Implementation Guide for Invoice Verification.
The message is set as an error message in the standard system. In this
case, the delivery costs are not selected.
regards,
dinesh

Import Vendor return is like re export from business point of view.
You can follow export sales process in sap.
What i suggest is for example if it is raw material you can create a bom with parent material as X-01,child material as Y what
you are returning to vendor.
Note: Create parent material as HALB with sales view & accounting view with valuation of raw material.
Do production goods receipt,it willl bring stock to parent material.
Create customer for vendor.
Adopt export sales process,create a sales order,delivery,billing,invoice,excise invoice,ARE1.
Note : Discuss with FI consultant/core team take care of accounting effects in billing.
Clear balances for customer or vendor using F-53 or F-58.
Note : You need to tell excise/submit documents telling it is not actual export.
or
If you opt for purchasing route,then there is lot of customs formalities to be completed & also need to pay duties taken credit,depends on value of goods if it is high, you can opt for import vendor returns or ask vendor for debit memo which will be adjusted with future purchases against same vendor
I also asked same question in forum, refer link for solution [ Import material - Vendor returned(Indian scenario) |Import material - Vendor returned(Indian scenario);

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Invoice image in vendor and customer document

Hello,
We have got following requirement.
Currently we are storing pysical invoice copies of vendor and customer in a pysical file. But now we want to see the image of invoices in vendor and customer document respectively.
It means, if it is possible to have an attachment button or some icon available when we see vendor and customer document.
Please advise how can we link the pysical invoice with SAP document. And is this something related to DMS or Archivieng Link.
Please suggest.
Best Regards,
Tapan

Hi Tapan,
At my company we are currently doing just this.
We have a server outside of SAP that stores our images. We did not want to store the images within SAP.
We use the SAP document number to link the image to the SAP document.
We do all our AP input from images. After an invoice is entered, and the document number is generated, we forward the image to a
e mail address for the server using the document number in the subject line. The image gets attached to the document. Then the image can be viewed by clicking on the Services for object icon.
I am sure there is some more techical stuff that goes this, like an RFC connection. I am sorry I am not technical. I am the functionala AP person. We also have a program that takes the image and attaches it to the cross company document if there is one.
Hope this gives you some ideas.
Alicia

Vendor profitablity in COPA

Similar Messages

Maybe you are looking for