Vendor/Purch Org error in SRM Shopping cart

Dear Experts,
Please help me to unlock the puzzle:
I replicated a new vendor (1339398) in to SRM from ECC.The Purchasing org for the vendor in ECC is MKNY.
When I submit the shopping cart in SRM portal, I am getting the following error:
Vendor 1339398 not intended for purch.org. MKNY (Item  Midget 6 A)
Please let me know if I need to check anything in the Org structure.
Points will be awarded for answers.
Thanks in advance,
Bob

Hi Bob
"Vendor 1339398 not intended for purch.org. MKNY (Item Midget 6 A) "
one small question here.
(1) vendor has 1339398 mapped with MKNY purchase organisation via vendor tab in web transaction (maintain business partner).
(2) When you assign a vendor via prefeered vendor you might get searching criteria O 5XXXXXXXX ( this is a purchase organisation) - this O 5XXXXXXXX is your r/3 purchase organisation or not .
(3) This O 5XXXXXXXX ( Pur org) determined based on your purchase  group .(i.e product group responsibility in org structure)
3 a . this purchase group must have assigned to the above purchase organisation O 5XXXXXXXXX.
(4) this purchase group is determined by your product category as i said earlier responsibility tab of purchase group.
can you cross check and let me know . we can sort out the problem asap.
regards
muthu

Similar Messages

  • Error in process shopping carts

    Hi,
    We are using extended classic scenario.
    Shopping carts are created in SRM. After approval of shopping carts
    errors occured.
    Error messages while monitoring shopping carts are as follows:
    1. Local error:   Error during determn of backend follow-on doc. for
    shopping cart 1000226740 
    2. Backend application error :Shopping Cart 1000227220 (Purch.
    Requisition 1100109923): ME007 System error: block object Purch.
    requisitio n, key 1100109923 
    Inthe description of 2nd error PR NO 1100109923  is visible in
    transaction BBP_PD, but it is not visible in R/3 nor in SRM shopping
    cart
    All the shopping carts having errors are approved almost at same time.
    We have checked RFC connection, queues, idocs as well as scheduled jobs
    and system log for that particular time.
    Can you suggest me how to process such shopping carts and also give a
    solution to avoid this problem as the same problem occurs almost once
    in month.
    Regard,
    Madhuvanti

    1. Is your employee & manager is inheriting the value of attribute BSA in org structure?
    it looks SRM is not able to decide the backend doc
    2. you will not be able to see the PR no in any sys
    because the SRM has just booked this PR no by the virtue of the no range mapping
    external in ECC for PR doc type
    and for back end in SRM
    what is yr settings for
    define backend objects
    and sourcing for prod cat
    BR
    Dinesh

  • Validate GL Account at SRM shopping cart at account assignment level

    Hi,
    In the SRM shopping cart system, at Account Assignment Overview level, is there any BADI or user exit or enhancement options to validate the GL Account when the account is selected/key-in?
    I try BADI for BBP_DETERMINE_ACCT, BBP_MESSAGES_BADI and BBP_ACC_CHECK_ICC. All is not trigger at Account Assignment level.
    Please advice.

    Hi,
    I have a similar requirement apart from all the validations done by BBP_DOC_CHECK_BADI  ,
    we have to add one more validation (check the asset acquisition date if it is less than the current fiscal year give error message).
    This has to done in R/3 .
    I checked for the exits in the FM BBP4X_CODINGBLOCK_CHECK_47A and found that there are no exits for this FM.
    PLEASE SUGGEST.Any help is appreciated.
    Regards,
    Rhea.

  • Change public template BBPSC06 (Error in system; shopping cart cannot be pr

    Hi,
    I am in SRM_SERVER 5 (SRM 4) SP 14.
    I have dome my standard templates without problems, but when I try to change I get this error when I go to transaction BBPSC06 (with same user).
    Error in system; shopping cart cannot be processed further
    does anybody know why is appearing this error?
    thanks
    Best regards

    HI
    THIS TRANSACTION CAN BE USED BY PURCHASER
    BBPSC05 and BBPSC06 How to create / change public template?
    is he  purchaser?
    BR
    MUTHU

  • Returning OCI hook_url to SRM shopping cart in Webdynpro ABAP

    Hi Friends,
    We are planning to use OCI external catalog for adding items to the shopping cart. I am creating WDA application which will act as the external catalog.
    In my application I am able to read the Hook_url and other parameters of the OCI configured. I got stuck in returning the hook_url by posting the html page back to SRM shopping cart which should be like below.
    <HTML>
    <HEAD>
    SAP Open Catalog Interface: HTML - Example
    <BODY bgcolor="#DED6C2">
    <FORM action="<%=Request.QueryString("HOOK_URL")%>" method=post target=_top>
    <input type="hidden" name="NEW_ITEM-VENDOR[1]" value = "1768">
    <input type="hidden" name="NEW_ITEM-VENDORMAT[1]" value = "648570">
    <input type="hidden" name="NEW_ITEM-MANUFACTCODE[1]" value = "4711">
    <input type="hidden" name="NEW_ITEM-MANUFACTMAT[1]" value = "4712">
    <input type="hidden" name="NEW_ITEM-EXT_QUOTE_ITEM[2]" value = "">
    <input type="hidden" name="NEW_ITEM-EXT_PRODUCT_ID[2]" value = "">
    </FORM>
    </BODY>
    </HTML>
    Is this acheivable using webdynpro ABAP? If so how we can do this?
    Thanks in advance.
    Regards,
    Prabhuraj

    Re: Creating OCI in Webdynpro ABAP

  • Send backend error notification to shopping cart creator/requestor

    Hi Gurus,
    We are currently using SRM7.0 classic scenario. In RZ20 transaction code, errors on the shopping cart appeared. We have a requirement for the ff:
    Send a notification to user informing them about the backend application error,
    Download and store the error in file server or a custom table
    and Delete the error from the application monitor
    Please advice if you have encountered any of these.
    Thanks.

    Hi Gerhard!
    Did you check DC30 in the backend to have the type of file used in the attachment?
    We had a similar problem after the last patching and SAP advised to change the file format in DC30 in the backend to show for example: instead of *.xls change to  .
    I hope this helps.
    Regards,
    Elisabeta

  • How to display error message in Shopping Cart?

    How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

    Hi Paul,
    In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
    Regards,
    Noel

  • How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

    Hi Experts
    i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
    i am doing below steps for this.
    1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by  using  append structure.
    2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
    then click on  "Metadata for Fields of Substructures and Table-Like Enhancements"  
    add the below entry
    Bus. Object Set Type  : I am trying 7 and 29
    Structure Field Name  : ZZfield
    Bus. Object Type       : BUS2121/BUS2201
    Set Level                    : Item
    Field Visible :  Check box should be checked
    Field Enable :  check box should be checked
    Can anyone has the idea of this?
    Thanks
    Rohit

    Hello Rohit,
    Please create a enchancement for component  /SAPSRM/WDC_UI_DO_SHIPTO.
    Add new input field and label in view V_DODC_SHIPTO.
    Bind the input field value with field ZZfield from structure  /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
    Regards,
    Neelima

  • SRM shopping cart attachment to SAP not transferring

    Hi SRM Experts,
    I have an issue with document attachment which is not coming to SAP R/3 Backend.
    Scenario 1
    1.Create shopping Cart in SRM system with One attachment,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
    Scenario 2
    1.Create shopping Cart in SRM system with TWO attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
    Scenario 3
    1.Create shopping Cart in SRM system with FOUR attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE attachments exists and Fourth attachement document number only exists in the DMS (CV03N - No attachment)
    From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
    Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
    Note - I have posted the same issue in DMS thread as well
    Cheers...Gopinath

    Hi Guru's,
    I am using SRM 7.0 and while i create an attachment in shopping cart and try to send it in ECC, the attachment is not reflecting .
    Since we are using the latest version of SRM, we have used BADI BBP_CREATE_BE_RQ_NEW
    (Method IF_EX_BBP_CREATE_BE_RQ_NEW~FILL_RQ_INTERFACE.).
    I have also gone through the below link and tried the implementation :
    http://wiki.sdn.sap.com/wiki/display/SRM/BBP_CREATE_BE_RQ_NEW-CreateRequisitionin+backend
    Also, all ECC configuration are in place. However things are not come in place. Only the details are reflected but the attachment is not reflected in ECC.
    If anyone can guide the correct way in SRM BADI along with ECC configuration (just to verify) will be a great help.
    Kind Regards,
    Kunal.

  • SRM shopping cart attachment to SAP not transfering

    Hi DMS Experts,
    I have an issue with document attachment which is not coming to SAP R/3 Backend.
    Scenario 1
    1.Create shopping Cart in SRM system with One attachment,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
    Scenario 2
    1.Create shopping Cart in SRM system with TWO attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only one attachment exists and other attachement document number only exists in the DMS (CV03N - No attachment)
    Scenario 3
    1.Create shopping Cart in SRM system with FOUR attachments,
    2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment only THREE  attachments exists and Fourth  attachement document number only exists in the DMS (CV03N - No attachment)
    From the above all its understood that last attachmen is not transfered to SAP . In Scenario 1 last attachement will Only one attachment.
    Its Strange issue, can any one face this sort for issue before, kindly let me know what could be the casue,
    Cheers...Gopinath

    Issue found with enhancement made by us in Class(SRM System). Same has been fixed. now its working, Thanks to all.
    Cheers...Gopi
    Edited by: Gopinath A.R on Mar 11, 2010 9:04 PM

  • Query on SRM Shopping Cart ,plz help its very very urgent

    Hi Friends,
    I have a query on workflow.
    Users creates PO through SRM shopping cart and immedeately they receive a mail in there mail box.Below is the process flow of sending the mail to the user inbox from srm shopping cart.
    SRM Shopping Cart>Business Object>Workflow-->Mail
    Here my problem is.
    The bususinees object generally holds the data for cart number and cart description, but when i am checking the workflow it does not contain any cart number or cart description,so that the mail that is going to user inbox also does not contain any cart number and cart description value.
    Recenly our client upgrade from 4.6c to Ecc 6.0 and this problem is happening after the upgradation.
    Please suggest if anyone face this kind of problem or anyone having any idea on this.
    Pls give me some suggestion.
    Thanks a lot
    Mrutyun^

    Hi,
    Your condition is puzzling... the workflow in SRM for SC is triggered after the SC is saved.
    The PO is a follow-on document after the SC is approved. As such it has no relationship to the backend upgrade since the workflow engine is in the SRM server. Your worflow is triggered from the SC or PO?
    Regards.

  • Error message during shopping cart approval

    Dear gurus,
    A user has encountered an error message when approving a shopping cart.
    The error message is "Shopping cart xxx (PReq. xxx): ME 020 Item category D not allowed with document type xxx".
    The PR is not created at the backend.
    Do anyone has encounter this error message before?
    Appreciate for your help.
    Thanks in advance.
    Regards,
    Santthi.

    Hi,
    Seems like your SC is trying to create service purchase requisition  with item category D for your PR doctype in the backend.
    Your PR doc type definition does not have item category D defined for it in MM backend.
    Best regards,
    Sridhar

  • X-Plane org cannot process my shopping cart and they say my security settings are too high;I have enabled popups from this site and still no joy. I.E. allows it

    Are there other security settings I need to relax so that Firefox allows X-Plane.org to process my shopping cart. I can still process the order using Internet Explorer.

    This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.

  • Supplier ******* not intended for purch. org error in S Cart

    Hi - We have set up a Dev SRM system using Extended Classic Scenario
    When we create shopping carts and we try to assign a vendor we get
    message Supplier A111111 not intended for purch. org.
    The vendor exists in our ECC 6.0 system under purchase organisation SD01
    The vendor exists in our SRM 7.0 system under local purchase
    organisation 50000006
    Vendor exists in SRM table BBPM_BUT_FRG0061 under the local purchase
    organisation 50000006
    The user PAULSMITH is also assigned to the correct organisation element
    Reading forums this seems to have happended to other clients but i
    could not find a resolution on SAP marketplace or SAP community network
    I would appreciate an early response as we are trying to get the system
    ready for a customer demonstration.
    kind regards
    Phil

    Hi
    Thanks for the reply much appreciated - i have saved my shopping cart but at item level it does not show my purchase organisation field on any of the tabs at item level. Plant, Company Code & Storage Location as listed in the screen templates
    So i checked my configuration settings on the org structure - our cookbook said to enter the backend purchase organisation on the root level for the purchasing department - I took this entry outand now the correct SRM org structure purchase organisation is visible in the shopping cart
    Thank you for your help
    kind regards
    Phil

  • Vendor not released warning as an error message in shopping cart

    Hi,
    When we are creating a Purchase order in SRM R/3 system, If we select a vendor which is not released then we get the Error message saying Vendor is not released and processing stops there.
    Similarly while creating a Shopping cart with the same vendor it just gives a warning message instead of error. Is there any way of converting the warning message in case of Shopping Cart to an error message ? Is there any BADI available ?
    Thanks,
    Sreekanth

    Yes when we are creating any shopping cart or any PO , for validations we are using one check badi.
    Try this Badi :
    BBP_DOC_CHECK_BADI.
    Hope It helps......

Maybe you are looking for