Vendor report that shows all vendors missing tax id information

I would like to create a report that shows all vendors that are missing the tax id information. Please direct me on where to go.
thx
Trace

Dear,
Enter T-code MASS.
Select Object Type LFA1 and click on execute button.
Than click on Fields tab, Find your required field and click on execute button.
Than enter vendor list for which you want to find out the list.
And click on execute button.
Regards,
Mahesh Wagh.

Similar Messages

Screen or Report that shows all Responsibilities for Org Unit

How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
FROM FND_PROFILE_OPTIONS FPO,
FND_PROFILE_OPTION_VALUES FPOV,
FND_RESPONSIBILITY_TL FR,
HR_ALL_ORGANIZATION_UNITS HOU
--HR_OPERATING_UNITS HOU
WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
PROFILE_OPTION_NAME = 'ORG_ID'
AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

Hello Kashif,
Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
The link that you provided really did not give any information that i was looking for.
And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
I have also tried to look in the System Administrator -> Profile -> System
and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
Thank you

Cost Centre report that shows all Tax Codes

Hi there,
We're trying to run a cost centre report that shows the tax codes relating to all expenditure, but Tax Code isn't an option in KSB1. Is there a way that it can be imported, or another report that we can use?
We need the tax code in order to be able to report on expenditure and tax paid / not paid for HMRC.
Thanks,
Michelle

Hi,
Cost reports KSB1 show only CO documents posted on cost centres. You can reconcile CO data with FI only for accounts which are relevant for CO, that is accounts defined as cost elements (normally, these are P&L accounts). If you want to see all CO documents, it's better to use KSB5 transaction as it shows all CO object postings, and not only cost centres. If you have some internal CO postings (manual postings, allocation, etc.), then they won't be shown in FBL3N and you have to consider this also.
Regards,
Eli

Trying to create a report that shows all 8.1 machines missing update 1 (KB2919355)

Currently I have a report that polls every machine that talks to our SCCM 2012 server and only displays Windows 8.1 machines.
I'd like to modify the code where it will only show the 8.1 machines that are missing Update 1. That way we can go through and patch the ones that need it. Is this possible?
The existing query looks like the following:
SELECT
SCCM_Ext.vex_R_System.Name0
,vMacAddresses.MacAddresses
,v_GS_PC_BIOS.SerialNumber0
,v_GS_COMPUTER_SYSTEM.Model0
,SCCM_Ext.vex_R_System.Operating_System_Name_and0
,v_GS_COMPUTER_SYSTEM.UserName0
FROM
SCCM_Ext.vex_R_System
INNER JOIN vMacAddresses
ON SCCM_Ext.vex_R_System.ResourceID = vMacAddresses.ItemKey
LEFT OUTER JOIN v_GS_PC_BIOS
ON SCCM_Ext.vex_R_System.ResourceID = v_GS_PC_BIOS.ResourceID
LEFT OUTER JOIN v_GS_COMPUTER_SYSTEM
ON SCCM_Ext.vex_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID
WHERE
SCCM_Ext.vex_R_System.Operating_System_Name_and0 like '%6.3'
ORDER BY SCCM_Ext.vex_R_System.Name0

Here is the code I use to pull 64bit machines that don't have CU1 (BTW cu2 is now out):
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SY STEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM .Client from SMS_R_System inner join SMS_G_System_SMS_ADVANCED_CLIENT_STATE on SMS_G_System_SMS_ADVANCED_CLIENT_STATE.ResourceID
= SMS_R_System.ResourceId inner join SMS_G_System_COMPUTER_SYSTEM on SMS_G_System_COMPUTER_SYSTEM.ResourceID = SMS_R_System.ResourceId where (SMS_G_System_SMS_ADVANCED_CLIENT_STATE.DisplayName = "CCM Framework" and SMS_G_System_SMS_ADVANCED_CLIENT_STATE.Version
!= "5.00.7958.1203") and SMS_G_System_COMPUTER_SYSTEM.SystemType = "x64-based PC"
Minor mods to this or your code should do the trick.
...I see you're talking an update to the OS, rather than SCCM update. Still hopes this helps.
Ben JohnsonWY

A report that shows all the elements with their setting

Hi
Is there a way to write a report in discoverer which will show all the elements set up in Oracle with there settings e.g. are they taxable or niable etc.
Alternatively is there a standard report in HRMS which would give the same results.
Thanks in advance

Not really as such. Taxable and Niable elements feed to the appropriate taxable or niable balances therefore, you will need to run a report against what elements are fed into these balances. I doubt that there will be anything as standard in teh pre shipped EUL's that will enable you to do this, however, for simple one of why don't you just call up teh balances in teh application and see what elemenst feed into them.
Cheers
Scott

Generate a report that shows all customers that have changed groupcodes

We use our groupcodes on the business partner to define retail customers, wholesale customers or vendors. I have been requested to generate a report by data range any customers who have changed from retail to wholesale.
The information can be viewed via the change log one record at a time, but the user is requesting a report by date range. So they can say in the last 30 days what customers were retail and are now wholesale.
How can I access the data in the change logs?
Erin

Hi Erin,
There is a 3rd party tool for SAP that can generate standard ALV reports. It is based on an sql editor, and the report can be generated with a few clicks.
Read a bit more here: [alv report generator|http://www.hovitaga.com/report-generator-overview]
See it in action: [Report Generator video|http://www.youtube.com/watch?v=cKSBvz_sd98]
Download a free version from here: [Download free version|http://www.hovitaga.com/try]
I hope this helps.
Best regards,
Tamas

Can we create a report that show us all comments created for a specific MP

Hi All,
I have created documents for multiprovider.
Now, I want to know whether we can create a report that shows all the documents created on this multiprovider or not.
Your help will be rewarded.
Regards,
Haritha.

Check out this post: http://forums.adobe.com/message/4399918#4399918
You can use skip logic to get the desired effect. If you have problems do it just reply back.
Randy

Report to Show All Machines with ANY Deployment Failures

I need to generate a report, daily, that displays all machines that have
any kind of an deployment failure. This list will then be used to generate tickets for consultants in that area to check on them.
I know I can look at specific deployments and see which machines show up as failed, but I am not seeing a report that shows all machines that have
any kind of a failed deployment. Does one exist, or will I need to create it?

you can try this report to list all failed deployments(only for applications but not packages).
select
all
SMS_AppDeploymentAssetDetails.AppName as 'App Name',
CASE WHEN SMS_AppDeploymentAssetDetails.AppStatusType = '1' Then 'Success'
when SMS_AppDeploymentAssetDetails.AppStatusType = '2' Then 'In Progress'
when SMS_AppDeploymentAssetDetails.AppStatusType = '3' Then 'Requirements Not Met'
when SMS_AppDeploymentAssetDetails.AppStatusType = '4' Then 'Unknown'
when SMS_AppDeploymentAssetDetails.AppStatusType = '5' Then 'Error'
else 'Unknown'
End as 'App Status Type',
CASE WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '1' Then 'Compliant'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '2' Then 'Non-Compliant'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '4' Then 'Error'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '6' Then 'Partial Compliance'
else 'Unknown'
End as 'Compliance State',
CASE WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '1' Then 'Install'
WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '2' Then 'Uninstall'
WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '3' Then 'Preflight'
else 'Unknown'
End as 'Deployment Intent',
SMS_AppDeploymentAssetDetails.DTName as 'Deplyoment Type Name',
CASE WHEN SMS_AppDeploymentAssetDetails.InstalledState = '1' Then 'Uninstall'
WHEN SMS_AppDeploymentAssetDetails.InstalledState = '2' Then 'Install'
WHEN SMS_AppDeploymentAssetDetails.InstalledState = '3' Then 'Unknown'
else 'Unknown'
End as 'Installed State',
CASE WHEN SMS_AppDeploymentAssetDetails.IsMachineAssignedToUser = '1' Then 'Yes'
Else 'No'
End as 'Device Assigned to User?',
SMS_AppDeploymentAssetDetails.MachineName as 'Device Name',
CASE WHEN CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)>0 THEN SUBSTRING
(SMS_AppDeploymentAssetDetails.UserName,CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)+1,255)
ELSE SMS_AppDeploymentAssetDetails.UserName END 'User Name'
from fn_AppDeploymentAssetDetails(1033) AS SMS_AppDeploymentAssetDetails
where SMS_AppDeploymentAssetDetails.AppStatusType = '5'
ORDER BY 1
Original query posted on http://systemcenteradmin.com/?p=67
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Report that shows material codes according to valuation class/ BSX posting

Dear SAP experts,
Is it possible to generate a report that shows all material codes under a certain valuation class or BSX (inventory) posting? Your help will be highly appreciated. Thanks!
Jessica Mari C. Cruz
Jr. Software Development Analyst
SAP- Materials Management Team

You can get the valuation class of the Material from MBEW- BKLAS
and you can get the Valuation class, TE Key & GL Account Combination in T030 table..
You can generate a Report by Joining the above tables..

A report which shows the vendor invoice and its purchase order MM

Hi All,
I wonder if ther's a SAP standard report which shows the vendor invoice (the FI document) and its purchase order MM.
Could anyone help me?
Thanks
G.Rossi
Edited by: Lakshmipathi on Aug 2, 2011 2:24 PM
Thread Locked - Reason Cross Posted

Dear,
you can use FBL1N,
From there you can view following things:
1. Vendor Invoice = Reference
2. Document type = KR and RE for Invoices
3. Po Number
4. Amount
you can enable there many fields as per your requirement.
Hope this helps!!!
Br,Vivek

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Report to show all purchase orders for which invoice tolerence is greater than 3%?

Hi Experts,
Recently our company cofigured 3% tolerence limit for invoice.Now, I have got a requirement to create a report to show all the PO's for which the
invoice tolerence limt is eq 3 %.Kindly anyone advise ,is there any table that stores the inovoice tolerence limit based on PO? How to achieve this requirement.
Thanks in advance
Thanks & Regards,
Anusha.B

Hi,
I was wondering don't you have in your company MM consultant who suppose to give you the required tables name .
Regards.

Report to show all activities (ended and not ended)

Hi,
I would like to do a report to show all activities (not ended and ended), but when I do the report from "Activity" the only information shown is no ended activities.
Is possible to show all activities? How can I do it?
Thank you and regards.

Monica - depending on the Subject Area, including certain "look-up" or reference fields to other tables automatically implies a join-relationship between the 2 tables.
Case-in-point, the activities subject area. Whenever you include fields from other objects like (Account Name, Campaign Name, Contact job title, etc.) "Answers" will automatically assume that you only want those activities where those field-values are populating, consequently filtering the report. It seems to occur any time you're trying to include data across tables in a one to one relationship.
A better example, and likely a common headache for CRM report builders is an Opportunity report, wherein you're including data from the Primary Contact associated to the opportunity. By the same limitations, you would wind up with only those opportunities that have a Primary Contact associated, versus all opportunities with contact-data if it's populated.
It is my understanding that the only workaround is to use Combined Analyses to create an union of the 2 reports, one with all opportunities and another with primary contacts. Use a pivot table and max-aggregation rule on the contact name to remove dupes.

Report that shows managers and his/her Employees

Hello All,
Is there any standard report that shows the list of managers and his employees.
Eg:
Report should like below
ManagerObjID EmployeeObjid
When I enter a position of a manager it should give managers and employees belonging to that position.
Thanks
Venkat

hi,
u can that details from HRP1001 table.
or u can use function module RH_STRUC_GET .

Crystal Reports Cross-Tab Report not showing all available fields

I am running CR2008 against MS SQL Express. I have several tables with fields and data in them and can create standard reports to show all the data in all the fields. However, when I try to create a cross-tab report, only some of the fields appear for me to choose from.
I created a standard report with all the fields I needed in my cross-tab report and ran a preview. Everything was there. I then added a cross-tab object, selected the tables only to find that fields that are in the main report are not showing up for selection in the cross-tab.

UPDATE: I exported the entire database from MS SQLExpress to MS Access and I am having the same issues, so it does not appear to be a problem with the database engine and, since the standard tabular reports show the fields, I am at a loss as to why they don't show up in the cross-tab or the Parameter fields.
I am creating the cross-tab through the Cross-Tab wizard. Is there maybe a bug in that? Is there a way to create it otherwise?

Vendor report that shows all vendors missing tax id information

Similar Messages

Maybe you are looking for