Verification of VirtualBox Host Failed: Unsupported VirtualBox version

I am configuring a VirtualBox Desktop Provider from the console. In Step 2.2 when i click next to veirfy the Certificate i get the following error
Verification of VirtualBox Host Failed
Unsupported VirtualBox version 3.0.12 on host ultra24.wfoo.org
I used the VirtualBox from the bundled vbox_3.0.zip file and used vb-install. I did have the standalone vbox 3.0.12 installed before this. But i did remove the packages via pkgrm before running vb-install.
Any pointers would be appreciated as i need to get this machine ready today for a demo.

did you reboot the box after you uninstalled your first Virtualbox?, and reinstalling the new version, Virtualbox uses kernel modules and they someimes get wedged into the kernel and require a reboot to remove.

Similar Messages

Verification of xVM VirtualBox Host Failed - VDA3.0

When I try to add a Desktop Provider, I get the following error upon verifiying the SSL:
Verification of xVM VirtualBox Host Failed
An internal error has occurred.
I've uninstalled and reinstalled both VirtualBox and VDA3.0. No luck.
Most frustrating!
thanks

Never mind. I got 3.1 to work, for this part of it anyway.

ERROR: OPatch failed as verification of the patch failed.

I installed OID by following these instructions( http://www.oracle.com/technology/pub/articles/chan-oid.html), db version created is 10.1.0.5 , but every time i apply CPU patch i receive error
here is opatch lsinventory results
Installed Patch List:
=====================
1) Patch 9119261 applied on Mon Feb 15 16:17:37 CST 2010
Unique Patch ID: 12031038
Error during opatch apply
OPatch encounters the following issues during Make:
There were problems running make commands. The errors encounted were:
Error for command: cd /oracle/product/oid10g//rdbms/lib
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME="/oracle/product/oid10g" 2>/oracle/product/oid10g/.patch_storage/9119261/make_local.stderr
I ran this command manually and it did'n gave any error
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME="/oracle/product/oid10g" 2>/oracle/product/oid10g/.patch_storage/9119261/make_local.stderr
Comparing "/oracle/4dba/9119261/files/lib/liboraolap10.a/xsoqhelp.o" and "/oracle/product/oid10g/.patch_storage/verify/lib/liboraolap10.a/xsoqhelp.o"
Comparing "/oracle/4dba/9119261/files/lib/liboraolap10.a/xsoqftbl.o" and "/oracle/product/oid10g/.patch_storage/verify/lib/liboraolap10.a/xsoqftbl.o"
There are 2 issues copying files to Oracle Home.
FILE PROBLEM: some files are not patched.
OPATCH_JAVA_ERROR: Patch was not successfully applied.
Verification of the patch failed.
ERROR: OPatch failed as verification of the patch failed.
Edited by: user12001353 on Feb 15, 2010 2:31 PM
Edited by: user12001353 on Feb 15, 2010 2:37 PM

Why are you applying Database Patches to Oracle Application Server?
What is telling you to do this?

(102) RFC_ERROR_COMMUNICATION: Connect to message server host failed

Hello,
I'm almost giving up on this...I've been messing with this for too long now...
I get this error message:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM
TYPE=B MSHOST=exts0002 GROUP=PUBLIC R3NAME=ANB MSSERV=sapmsANB PCS=1 ERROR       hostname 'exts0002' unknown TIME
Tue Feb 14 16:40:02 2006 RELEASE     640 COMPONENT   NI (network interface) VERSION     37 RC          -2 MODULE      ninti.c
LINE        332 DETAIL      NiPGetHostByName2: hostname 'exts0002' not found SYSTEM CALL gethostbyname_r COUNTER     1
I try to get the flightlist demo to work. I've put in "sapmsANB         3600/tcp" in services file locally in my machine (I'm using Sneak Preview SP11).
I've also done everything in "/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
I've done everything possible to get this to work, but no luck.
What is wrong here?, please help

Now I've put in "193.183.156.17     PetJoh     PetJoh.afab.local" in Hosts -> rebooted -> but still can't ping exts0002 (or the fully resolved name to it) I can't ping the actual IP nr either.
I can, however use JCO java code like:
import com.sap.mw.jco.*;
public class R3Connect extends Object {
     JCO.Client mConnection;
     public R3Connect() {
          try {
               // Change the logon     information     to your     own     system/user
               mConnection     =
               JCO.createClient(
               "100",                                        // SAP client
               "rfcuser",                                   // userid
               "jakob",                                   // password
//               null,                                        // language
               "en",                                        // language
               "anb.af.hosting.emtab.com",               // application server host name
               "00");                                        // system number
               mConnection.connect();
               System.out.println(mConnection.getAttributes());
               mConnection.disconnect();
          } catch (Exception ex) {
               ex.printStackTrace();
               System.exit(1);
     public static     void main (String args[]) {
               R3Connect app =     new     R3Connect();
This works perfectly fine to connect, Why doesn't SLD?

RFC_ERROR_COMMUNICATION: Connect to message server host failed

We are trying to create JCO destination
and we are getting the below problem
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=sappw2ci GROUP=PUBLIC R3NAME=PW2 MSSERV=sapmsPW2 PCS=1 ERROR service 'sapmsPW2' unknown TIME Thu Jan 10 23:34:05 2008 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE nixxhsl.cpp LINE 776 DETAIL NiHsLGetServNo: service name cached as unknown COUNTER 1
we added sapmsPW2 in the services file still we are facing the problem
i saw all the related posts in the forum but nothing worked
please help me in resolving this issue and points will be awarded for sure
Bala

Hi,
This JCO Exception caused by network problems, connection breakdowns, gateway problems, unavailability of the remote SAP system, etc.
What you can do is: Get the host of the SAP System from dev_jrfc.trc or the JRFC trace; ping the SAP system from command line; check routers, gateways, SAP systems
If an error has occurred on a lower communication layer, for example an RFC_ERROR_COMMUNICATION or RFC_ERROR_SYSTEM_FAILURE exception, have a look at the dev_jrfc.trc files. These files are written by JRFC and can be found in the directories j2ee/cluster/server* of the J2EE Application Server Installation.
Please check this blog and link:
The specified item was not found.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2f3a%2f3b1b40fcdd8f5ce10000000a155106%2fcontent.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2f94%2f3c1b40fcdd8f5ce10000000a155106%2fcontent.htm
Hope it helps....
Regards,
Mona

Connect to message server host failed Connect_PM TYPE=B MSHOST=hmsnsw00

When i deploy "TutWD_FlightBooking" Sample WebDynpro application I get following error.
I have following setup.
NetWeaver developer Studio (NWDS) Version: 2.0.9
J2EE server running on the same machine where i have NWDS Version: SAP J2EE Engine/7.00 PatchLevel 105053.42
SLD Version: 7.0009.20060621180635.0000
Build: 20060622 2041, Depot: //sdt/com.sap.lcr/645_SP_REL, Changelist: 345651
ABAP R/3 system is on remote system (accessing clients R/3 system) on the network.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=hmsnsw00 GROUP=PUBLIC R3NAME=DEV MSSERV=sapmsDEV PCS=1 ERROR timeout while pending for route completion TIME Tue Mar 13 12:04:14 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -12 DETAIL NiErrSet COUNTER 1
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
    at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:989)
    at com.sap.mw.jco.JCO$Client.connect(JCO.java:3193)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:90)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:122)
    ... 62 more
I get same error message when i test the JCo Metadata connection, Model data connection works fine.
The message server value under WebDynpro content admin is created with right values as i checked with Basis person.
My service file in C:/windows/system32/drivers/etc has entries for both J2EE stack entry and ABAP stack (on remote server) entry with port numbers.
When i ping the ABAP (remote server) from my machine command prompt I get response.
I am running out of options. I really appreciate your inputs.
Ramesh

Hi, I think this might have todo with the fact that your Java stack wants to connect with a server from the same logon group called "PUBLIC".
Please make sure you added the same logon group "PUBLIC" to the ABAP Server. Try transaction SMLG.
Also as posted above the SLD needs this info aswell.
After using the transaction SMLG, log in and out 5 times in a row to your ABAP stack using SAP GUI. This might actually force an update to the SLD.
Greetings,
Robbert
Message was edited by:
        Robbert van Waveren

Connect to message server host failed;WSAECONNREFUSED: Connection refused

Hi All,
I am getting the following error when I tried to test the system connectivity from the portal to NSP instance.
Connection failed. Make sure that Single Sign-On is configured correctly
I found the following entry in the logs
Error> occured >Wed Feb 03 22:43:49,875<
RfcException:
    message: Connect to message server host failed
Connect_PM TYPE=B MSHOST=abchome.abcsap.local GROUP=SPACE R3NAME=NSP MSSERV=sapmsNSP PCS=1
ERROR       partner '192.xxx.xxx.123:sapmsNSP' not reached
TIME        Wed Feb 03 22:43:49 2010
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Both NSP and J2E instances are on the same server. OS - win2k3.
I checked the services file and have the sapmsNSP entry.
I am able to launch an SAP transaction from System Administration -> Support
RZ70 from NSP also fails JCo error. SLD_UC RFC itself works fine and the JCo RFC provider SLD_UC program is running
WEB AS & ITS connections work fine.
User authentication is from backend, NSP.
I think I have gone thru all the logs but could not resolve the issue.
I appreciate any help on this,
Victor

I tried to go thru the thread. I did not find any clue as why only server connectivity is failing. ABAP trial version is running fine and the NW trial version is working fine too. These run without crashing. I did a lot of customizing on the portal but dont see any issues except the System Connectivity. Like I mentioned I did UME configuration to point to NSP ABAP instance and I can log into the portal with user credentials that I use to login to ABAP. I can launch webgui etc without any issues.

Elom Java Console "Connect to remote host Fail"

Hi,
I'm accessing an elom over the https interface, which works fine, however when trying to launch the Java console, the app starts but a dialogue box appears stating "Connect to remote host Fail!", and quits when I click ok. I'm using:
Kubuntu 9.10
Firefox 3.5.5
Java 1.6.0_15
Elom firmware version 2.70
I've also tried running against JRE 1.5, and tried saving the jnlp file and running that directly from javaws, all attempts produce the same result. I am able to connect to port 8890 from my machine. An strace seems to suggest that it sends and receives from port 8890 but then gets a Connection reset by peer.
Furthermore I've also tried running it through localhost using an ssh tunnel to the elom, again, same result.
I've now run out of ideas of what could be causing this issue, any help would be greatly appreciated.
TIA
Regards
Craig

SOLVED
FYI, I downloaded the debian package of libstdc++5 from http://ftp.us.debian.org/debian/pool/main/g/gcc-3.3/libstdc++5_3.3.6-18_i386.deb
After installing that on Kubuntu, the console works fine.

Communication from the Oracle Mngt service host to the agent host failed

Hi There,
I have installed Oracle 10.2.0.1 Grid software on a Solaris Zone. I plan to upgrade it to 10.2.0.5 very soon but would like to test the agent connection from a remote server first. I installed agent version 10.2.0.5 on the remote server. When I log into the oracle grid GUI I can see the host called "localhost" (this is not the correct name. It should be the server name) and the database instances on that server. However, when I select the localhost and press the configure button I get the following message:
Communication from the Oracle Mngt service host to the agent host failed. Refer to help for details localhost:cn=servername
The system administrators changed the /etc/hosts file to make sure the server was listed first fully qualified. For example: servername.domain.com instead of servername. However, this did no make a difference.
Could the issue be any of the following:
- Oracle 10.2.0.1 GRID does not work with 10.2.0.5 agents ?
- Oracle GRID in general don't work on SOLARIS Zones?
Please help.
Thanks.

OMS - -> Agent communication is not upward compatible
Downward, so Agent 10.2.0.1 --> OMS 10.2.0.5, should not be a problem.
In the last case however, you would not have access to any 10.2.0.5 Agent features.
So you can choose from 2 working options:
1 - Install the 10.2.0.1 Agent
2 - Upgrade your OMS to 10.2.0.5 (preferable)
Regards
Rob
For more info, tips and tricks on OEM GC, check http://oemgc.wordpress.com

OUI-67124:Verification of 'ar' actions failed.

version: Solaris10 Spars and RDBMS 10.2.0.3
Applied CPUApril2008 and get this ...suggestion, what the title of note 353150.1, when i search for this # got so many ,
The following warnings have occurred during OPatch execution:
1) OUI-67124:Verification of 'ar' actions failed. This is a known issue for this platform. Please check the note 353150.1 on Metalink for the process to manually verify the files.
OPatch Session completed with warnings.

Here is a little awk script to avoid the manual verification suggestion in the metalink doc. If the script doesn't print anything, you are good to go.
grep "file name" <YOUR APPLY LOG> |
awk '{
if (NR % 2 == 0) {
dfile=substr($7,1,length($7)-1);
dsize=$11;
if (dsize-4 != ssize) {
printf("SourceFILE: %s\nSourceSIZE: %s\nDestFILE: %s\nDestSize: %s\n\n", sfile, ssize, dfile, dsize);
} else {
sfile=substr($6,1,length($6)-1);
ssize=$10;
Edited by: hal9000jw on Aug 27, 2008 1:16 PM

Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine

Hello,
When implementing a VDI solution, I'm getting an error on our virtualization host server. The error is:
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [VDI-PC].
Hresult 0x8000FFFF
Event ID 8467, Severity: Warning, Source: Microsoft-Windows-TerminalServices\TSV\VmHostAgent
This error happens every time a user or admin connects to a VDI desktop. This is a fresh install of Remote Desktop Services on completely fresh servers. This is in testing and we have not ever had it working before without the error.
Topolgy: Server2012 R2, Windows 7
Srv-RDCB1: Is the connection broker and Web Access server. It is Virtualized thru Hyper=V.
Srv-RDVH1: Is the virtualization host. It is a physical server. It also has a separated hyper-v role (for RDS VDI deployment).
Everything seems to be functional other than this error in the log, and I haven't found any information on what this could mean.
Any help is greatly appreciated, thanks!

Hello. I have this trouble too.
All roles on one server.
Deployment type - Quick start
Deployment Scenario Virtual mashine-based desktop deplyment
Reinstall all roles 2 times
Warning TerminalServices-TSV-VmHostAgent
8467 Orchestration
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [per-0] .
Hresult: 0x8000FFFF
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TerminalServices-TSV-VmHostAgent" Guid="{92618A87-2F6A-4B75-9AE2-E77BE7EAF43C}"
/>
<EventID>8467</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>22</Task>
<Opcode>14</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-11T13:24:45.579138000Z" />
<EventRecordID>1655</EventRecordID>
<Correlation
ActivityID="{F4200EF7-FEDD-4CAD-9F5D-6219A5F30000}" />
<Execution ProcessID="3164" ThreadID="13164" />
<Channel>Microsoft-Windows-TerminalServices-TSV-VmHostAgent/Operational</Channel>
<Computer>blade2.vzfei.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns="Event_NS">
<param1>per-0</param1>
<param2>0x8000ffff</param2>
</EventXML>
</UserData>
</Event>
In RD Gateway Manager, right-click on the RD RAP and click Properties. On Network Resources tab select
“Allow users to connect to any network resource”.
not work.

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

PDF pagination works find in Reader 8, but failed in lower version 7.

Hi, All
Here's my situation
One dynamic PDF form:
Contents in subforms are flowed layout. And for every section (e.g. Chapter 1, Chapter 2 etc) in pdf, create "New Page" to make sure that they start their contents in seperate new pages, not following the previous flowed content.
The pagination for Flowed content in subforms works ok.
But the pagination for "New Page" only works in Reader 8 and failed in lower version 7.
Any clues?
Thanks
Alan Ji

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Suddenly I can't open one document in inumbers: "The sheet can't be imported. The document was created with an unsupported application version."

Yesterday I worked on a inumbers document on my mac mini. No problem. 3 hours later I would open the same document on my ipad. It told me that there were 2 versions and I had to choose one (surprisingly bouth had the same time/date). Since then I can't open this document anymore (regardless if iphone, ipad, mac mini): "The sheet can't be imported. The document was created with an unsupported application version." I worked on this document more than 1 year only on my ipad, iphone, imac... how can i get it worked or back? Other documents are still working properly.
Thanks for any hint.

The first part of the warning message was in german, so it's probably not translated as it really appears in englisch:
Massage on IPad and IPhone: "Tabelle kann nicht importiert werden. The document was created with an unsupported application version.
Message on mac mini: ""Verbrauch.numbers" kann nicht geöffnet werden"
What changed since is also, that the mini privew for this document no more exist; it shows just the inumbers icon in the sheet. The other documents around this one appears with preview and can be open, e.g. are working fine.

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306

Verification of VirtualBox Host Failed: Unsupported VirtualBox version

Similar Messages

Maybe you are looking for