Tracking User logons

Hi,
I have a requirement, wherein, I need to report the number of logons per user, per period etc.
Is there any standard program/FM available?  I know the program RSUSR200 which reports several user details including INCORRECT logons.  But, I need correct logons & details.
Thanks in advance.
Regards,
Srinath.

Hi Sudha,
Thank you very much for the response.  Actually the requirement, in brief, is..I have a selection screen where I have FROM and TO dates.  Once dates are entered, I need to report all the logons per USER (for all the users) within that period.
Hope I'm clear with what I want, this time.
Thanks once again.
Srinath.

Similar Messages

  • Tracking failed logons in 9i(R2)/10G

    What is the best way to track failed logons in 9i? I have been reading through the doc's on tahiti for 9i, but so far have only seen fine grained auditing of tables etc. when all I want to do is record the failed logins, which machine, os user etc.
    I am assuming that once I find the proper method in 9i, I can apply the same process in 10G, even though 10G may have more of this capability already built in.
    thanks.

    Thanks - I am assuming I have to enable auditing somehow in the init/spfile and bounce the DB to have this take effect?
    eg. audit_trail=db (or os?)
    Then have the statement you suggested somehow auto-run at database startup?
    I have initiated logon and logoff triggers and have a monthly report from the data they create to keep the SOX bean-counters happy, but now they want a report to show all failed logons as well, so I am trying to find the best way to do this that will be easy to pull a report from.
    Edited by: user571263 on Nov 25, 2008 2:08 PM

  • Tracking user IP addresses?

    Does Tarantella log which IP address a given user logs in from? I noticed
    in the Object Manager that you can see what IP address a current user is
    logged in from. Is it possible to track that information through Billing
    Services?
    Thank you,
    Steve

    Yes, I need to track all user logons and where those users logon from. I'm
    not as interested in what emulator sessions they run but that information
    is welcome.
    Escape 27 wrote:
    Steve,
    You could probably try adding "*/*/*:all_%%PID%%.log" to your log filters to
    see if you can find the necessary info in the log file. If you do, you can
    then modify the filter log only those specific components. I'm sure the
    client IP address is being logged in one of these components, but can't
    remember which one though.
    BTW - what are you trying to achieve by tracking the user IP address?
    "Steve T" <[email protected]> wrote in message
    news:cnjd1u$n87$[email protected]..
    Thank you for your response. After considering it, I believe that it would
    cause a problem: issuing the TTA emulatorsession command consumes high CPU
    resources. To track the majority of the user sessions would require
    running this command every minute in cron. This would not be good for
    performance. Even if it was run every 5 minutes, it would still impact
    performance on an already busy TTA server.
    Also, we would miss any quick sessions that may have started and ended
    after the previous emulatorsession poll took place. (The TTA
    emulatorsession command will only display currently active sessions.)
    I was hoping that there would be a log filter that could be configured to
    modify what Billing Services keeps track of.
    Regards,
    Steve
    Tillmann Basien wrote:
    if you use "tarantella emulatorsession list" you can see the IP Adress of
    the Users Client WS.
    Writing an cron based script, and analyse the output.
    TAB
    "Steve T" <[email protected]> schrieb im Newsbeitrag
    news:cniutc$inn$[email protected]..
    Does Tarantella log which IP address a given user logs in from? I
    noticed
    in the Object Manager that you can see what IP address a current user
    is
    logged in from. Is it possible to track that information through
    Billing
    Services?
    Thank you,
    Steve

  • Tutorial - how to track user progress in a Captivate movie

    I wanted to start working with the new scripting capabilities
    in Captivate 4 and thought a good first project would be to create
    a set of variables and custom actions and execute the actions based
    on the state of the variables. I wrote up a description/walkthrough
    with screenshots and the source .cp is downloadable here:
    http://elearninglive.com/wordpress/2009/01/tracking-user-progress-in-captivate-4-using-var iables-and-actions/
    Hopefully it proves useful to others!
    A couple of things I mention at the bottom of the post in
    regards to the new features in CP4:
    1. The actions window is amazingly slow once you add more
    than a handful of actions. Perhaps it's just my machine? I have a
    very fast machine with lots of ram, but perhaps it's something
    unique to my environment?
    2. You can't 'chain' actions. In other words, you cannot use
    'execute multiple actions' setting to execute user-created actions,
    just the built-in ones, which seems to me a pretty big limitation.
    I had to work around it.
    3. As an add-on to #1 above - there is no way to
    import/export code. Since the actions window is so slow it would be
    ideal if we could just import code written in a text file, or
    better yet, have a simple code editor (like the actions panel in
    Flash).
    My 2 cents, fwtw, as a new CP4 user....
    mark
    www.elearninglive.com

    > But I didn't really know what AuthorWare was actually
    > capable of producing until this past year when I
    happened to subscribe to
    > the
    > AWARE list (AuthorWare Developers) and over time read
    about the
    > capabilities it
    > had. It was an excellent tool - and it seems, the best
    there ever was for
    > our
    > needs, and it amazes me that there isn't anything to
    replace it yet that
    > matches it. Of course, the problem was the shockwave
    plugin. Which is a
    > big
    > problem and the real original reason I never looked into
    it in the first
    > place.
    The biggest problem Authorware had was poor marketing. Second
    was it had no
    way to natively create the eye-candy that Flash was wowing
    the world with.
    Third, there was no attempt by Macromedia modernise
    Authorware with a lot of
    very basic things that would have made a huge difference to
    everyone's
    perception of the tool
    Fourth, Marketing kept telling people Authorware was dead,
    from about
    Authorware 5. I think the Flash team was on a bonus for
    converting people
    >
    > I don't understand why Adobe is now making Captivate the
    next AuthorWare.
    > That's basically what they're doing it seems. It's like
    saving up to buy a
    > ferrari when you have on sitting unused in your garage!
    They already had a
    > great elearning development tool in AuthorWare and just
    needed the one big
    > piece: output to flash swf and not shockwave. I guess
    there were technical
    > reasons why that wasn't done?
    I think it is clear to those of us that have had to move to
    Captivate from
    Authorware that Captivate is *very* lacking in specific
    advanced features
    and functionality that old hands are used to. As with any
    product, users are
    bombarding adobe with requests that boost the power and scope
    of Captivate.
    It's a natural progression.
    >
    > As much as I like Captivate 4, it's a few major releases
    away from coming
    > close to what we *really* need.
    I agree - but it is a lot closer this time around :-)
    Steve
    http://twitter.com/Stevehoward999
    Adobe Community Expert: eLearning, Mobile and Devices
    European eLearning Summit - EeLS
    Adobe-sponsored eLearning conference.
    http://www.elearningsummit.eu

  • Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

    I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message: 
    "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
    I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB. 
    Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
    Thanks much! - Rookie DBA

    Hi IWAR,
    The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
    To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
    In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
    Expand the database in which to create the new database user.
    Right-click the Security folder, point to New, and then click User.
    On the General page, enter a name for the new user in the User name box.
    In the Login name box, enter the name of a SQL Server login to map to the database user.
    Click OK.
    Reference:
    http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Apply the default user logon picture to all users

    Hi
    I applied gpo "apply the default user logon picture to all users"
     Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
    C:\programdata\Microsoft\User Account Pictures\user.bmp  --> renamed my company log to user.bmp.
    Taken backup of old user.bmp.
    But policy is not working.
    Environment:
    Windows Server 2008 R2
    Clients:Windows 7 and Windows 8

    Hi S.Vijay Kumar,
    Based on my understanding, the GPO which configured the
    Apply the default user logon picture to all users would not apply successfully. What’s more, you have customized the default user logon picture
    %ProgramData%\Microsoft\User Account Pictures\user.bmp. Right?
     Firstly, please check if the scope of this GPO and the setting of Filtering are correct.
    Secondly, please follow the steps below to check if the GPO is applied to these Windows XP clients:
    Click Start, type rsop.msc in the search box to access
    Resultant set of policy.
    Check if the GPO is applied to these clients and the setting of the GPO is correct.
    In addition, it would be helpful for future troubleshooting if you could help to collect the following information:
    Did the GPO fail to apply for all the computers or only some computers?
    Can you set the user.bmp as the user logon picture
    manually?
    Regards,
    Lany Zhang

  • How to read user - logon language (Urgent)

    Hi All,
    I have written the below code to display the language in english if it exists if not in french & so on, but i would like to know how i can read the language in which the user has logged on & use that as the first criteria.
    Eg: S_SPRAS = User Logon language
    SELECT SINGLE MAKTX FROM MAKT INTO Y_MAKTX
      WHERE MATNR = MARC-MATNR
        AND SPRAS IN (S_SPRAS,'EN','FR','IT',' ').
    Hope my problem is clear, await inputs.
    Vivek

    Hi,
    Let me try to explain the problem
    Mtl-A, has description in 3 languages. (En, Fr, It)
    Mtl-B, has description in 1 language only. (It)
    Mtl-C, has no description
    First i want to check for a given mtl if description exists in the user's logon lang, if it does not, then check if description is maintained in English, if not check in French, if not Italian.
    Eg1: User logs-in with En language,
    Then the description for mtl-A is displayed in english, for Mtl-b description is displayed in Italian (as only italian description is maintained) & for mtl-c no description is displayed as it is not maintained.
    Eg2: User logs-in with It language.
    Then description for Mtl-A & B is displayed in Italian & for mtl-c it is blank as no description exists
    But when i use the below code, the system by default picks up EN which is my default lang, even if i login in French or Italian lang, the description is shown in english only.
    SELECT SINGLE MAKTX FROM MAKT INTO Y_MAKTX
      WHERE MATNR = MARC-MATNR
        AND SPRAS IN (SY-LANGU, 'EN', 'FR', 'IT').
    Hope i was able to put across my problem clearly.
    Await inputs.

  • User logon history date and time details

    Hi,
    can any  tell me the user logon history tables,
        as usr02 is only having the present log on details

    use below Function module
    CALL FUNCTION '<b>RSAU_READ_FILE</b>'.
    it will solve your problem...
    =====================================
    Use BAPIS there are very useful BAPIS to get the user's info.
    BAPI_USER_CHANGE               Change User                                                              
    BAPI_USER_CLONE                Create User with Template in Another System                              
    BAPI_USER_CREATE               Create a User                                                            
    BAPI_USER_CREATE1              Create a User                                                            
    BAPI_USER_DELETE               BAPI to Delete a User                                                    
    BAPI_USER_DISPLAY              Display users                                                            
    BAPI_USER_EXISTENCE_CHECK      Check a user exists                                                      
    BAPI_USER_GET_DETAIL           Read User Details                                                        
    BAPI_USER_LOCACTGROUPS_ASSIGN  Change Activity Group Assignment for Dependent Systems from Central System
    BAPI_USER_LOCACTGROUPS_DELETE  Delete Activity Group Assignments in the Dependent Systems               
    BAPI_USER_LOCK                 Lock User                                                                
    BAPI_USER_LOCPROFILES_ASSIGN   Change Profile Assignment for Dependent Systems from Central System      
    BAPI_USER_LOCPROFILES_DELETE   Delete Profile Assignments for Dependent Systems                         
    BAPI_USER_PROFILES_ASSIGN      User: Assign profiles                                                    
    BAPI_USER_PROFILES_DELETE      User: Delete All Profile Assignments                                     
    BAPI_USER_UNLOCK               Unlock user                                      
    ===================================
    U can see tables:
    USR01 User master record (runtime data)
    USR02 Logon data
    USR03 User address data
    USR05 User Master Parameter ID
    USR12 User master authorization values
    <b>Reward Points if it is useful..</b>
    Thanks & Regards
    ilesh 24x7

  • Powershell User logon script not Exiting With "Exit" scripts are set to be visible in GPO

    I am trying to run this script as a user logon script and it is set to visible to the user. There are other parts of the script but It won't ever Exit. It works fine if I run it directly I only have the trouble when it is in the logon script. I'm thinking
    of tryin "Kill -Id $PID" but I'm sure I'll get a bad return code.
    Has anyone else experienced this or hav any ideas what I could try?
    If (Test-Path U:){
    Robocopy U:\ $Destination /E /move /XF "*.inf"
    New-Item -Path HKCU:\Software\test\test -Name Test –Force
    Else{
    Exit
    Else{
    New-Item -Path HKCU:\Software\test\1 -Name Test1 –Force
    Exit       #here is where it will not stop!
    Exit

    Sorry, I did mention this was only a subset of the complete script.
    So, what I am trying to accomplish in words.
    1. Check for the existence of a certain folderon the c: Drive (that is created as apart of a different process)
    2.  Look to see if a registry key exisits that tells the script if it should run or not. So if certain registry key exists under HKCU then don't run if not continue.)
    3. The first time a user logs in and does not find the value that the process is allready complete show the user a message box aski9ng them if they are ready to do (something) if not write a registry key saying step one has completed and then quit.
    4. When the user logs in again the script looks to see if the process is complete and or if step one is complete, if step one is complete it allows the user to skip the process 2 more times but on the forth login forces the user to complete the process and
    writes the final registry key that it is complete.
    Like I say I have this all working correctly if I manually have the user run it. I just don't know why Exit is not being recognized when in the users login script processing of the script. I appreciate your reply and any direction you can point me to.

  • GPO Run these programs at user logon not taking effect when configured in Computer Configuration section

    [EDIT 20140207]:
    I found that the default domain policy sets "run these programs at user logon" and (other than I expected) not BOTH GPO settings become active, but the setting from the default domain policy overrides the setting from my new GPO. So I think I have
    found the answer myself.
    When on our W2k8-R2 DC I create a new GPO and configure
    "Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe" (just for testing) it won't take effect on Win 7 SP1, no matter what the Security
    Filtering options are.
    It seems other settings (in the very same GPO) become active but "run these programs at user login" from the computer policies section doesn't. I configure the very same setting in the section "user policies" instead and add "Authenticated
    Users" to Security Filtering, the program will be started. But that's not what I need.
    I can reproduce the issue, here are the exact steps:
    create a new group "group-a" for later security filtering
    create a new GPO
    in the new GPO set "Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe"
    for setting the scope remove "authenticated users" from Security Filtering and add "group-a" instead
    link the GPO to the domain root
    make "test computer" a member of "group-a"
    on "test computer" run "gpupdate /force", reboot, log in
    Issue: notepad is not being started.
    What I'm aiming for is obvious: Depending on the membership of group-a I want to configure certain programs that should be started whenever a user logs in.
    gpresult /R returns that it would be applying the GPO. (It actually is but the setting "run these programs at user login" is not being applied.)
    For debugging I started MMC / RSoP on one of the machines on which the GPO should have been applied and found that "run these programs at user login" is not set (which seems to be the reason why the GPO won't work on the machines).
    Searching the web I found similar reports
    [1] [2] but no solution was found and the user used a workaround instead.
    If I change the GPO so that I use the very same setting in "user configuration" instead of "computer configuration" it works as long as I add "authenticated users" to the Security Filtering. But then the GPO is applied to all users
    and not only to the ones using computers which are members of group-a. According to this howto [3] I should not remove "authenticated users" but alter the security setting instead. However, the howto seems to be aimed ad w2k3 and using Win2k8 I cannot
    find security settings "apply" for "authenticated users" so I cannot remove that setting, there's only "read" or "read and modify".
    So two questions:
    1. Why doesn't it work when using "computer settings"
    2. What about that Security Filtering with removing "authenticated users" and using group-a instead?
    T.
    [1] http://social.technet.microsoft.com/Forums/windows/en-US/0e280490-fba6-4ced-aba5-ae49c60e44bd/computer-gpo-run-these-programs-at-user-logon-not-working-as-intended-on-win7-clients?forum=w7itproinstall
    [2] http://social.technet.microsoft.com/Forums/windows/en-US/8cb78bf8-33ec-461e-8604-32d82d016685/run-these-programs-at-user-logon?forum=winserverGP
    [3] http://www.grouppolicy.biz/2010/05/how-to-apply-a-group-policy-object-to-individual-users-or-computer/

    Hi,
    sounds like you find the answer already.
    If you have any further question, please feel free to let me know.
    Have a nice day!
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • Impact on roaming profile accounts if we Change User logon Name to Employee Number format in Active Directory for all User accounts

    I want to understand if we change User logon Name to Employee Number format in Active Directory for all User accounts, then what would be the impact on existing profile. Whether we need to change it manualy or it will connect to same profiles in terminal
    session.
    As i observed it create new profile after logon name changed to employee number where existing users profile settings get fails to load and prompt for new settings (such as outlook reconfiguration, share drive mapping etc.).
    Kindly let me know the proper process to overcome with this, how to connect same existing roaming profile with employee number format change.

    Hi,
    What if we change the user name of user account, will it have impact on roaming profiles.
    Yes, it will affect roaming profiles. Please rename the roaming profile folder as the new user account name, in addition, change the profile path in ADUC.
    Here is an related article below for you:
    How to Rename a Windows 7 User Account and Related Profile Folder
    http://social.technet.microsoft.com/wiki/contents/articles/19834.how-to-rename-a-windows-7-user-account-and-related-profile-folder.aspx
    Best Regards,
    Amy

  • How we Can find out How many Users Logon into the Portal those users Names.

    Hi Friends
    I have one doubt in Portal,
    How we can find how many Users Logon into the Portal and how we can find that users Names in Portal.
    Regards
    Vijay Kalluri

    Hello Vijay,
    If you are at all interested in a 3rd party application to make your life a bit easier getting stats on your users, you could check out Click Stream by Sweetlets.
    Click Stream uses the Usermanagement (UME) API to get more information about the user, groups, roles, LDAP attributes etc. and offers you the ability to filter this information in nearly any report at the click of a button.
    Click Stream also uses the PCD API to get information about the pages your users are visiting too.
    In the very near future Click Stream will also have iView recording to monitor iViews, telling which iViews have been clicked, etc.
    Here are some reviews on the SAP EcoHub from people who have used it: http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream
    Please just let me know if you have any question or if you are open to test drive Click Stream. We will certainly help as best as we can.
    Good luck.

  • Oracle 10.2.1.4.0: Getting alerts like User logon time is 4007.29 secs

    Hi Team,
    Im getting alerts like User logon time(msec) is 4007.29 secs & Session 291 is blocking other 13 sessions via OEM.
    Im unable to find out the SID 291,to check which process has blocked the resources.
    Please suggest us on above two quires.
    Database : Oracle 10.2.1.4.0
    Thanks in Advance!

    Hello Anthony,
    even maybe not on Windows (I faced this on Unix), proceed with invalid objects as in : Note 1453935 - Invalid DataPump objects after Windows patch collection > 25
    this is the leftover of some previous 10g patching. Once objects are recreated, recompilation will go ok.
    Regards,
    Igor

  • Tracking user actions inside Compliance Calibrator

    Good day everyone
    I am currently working on a CC5.2 implementation and I was wondering if there was any way to track user activities, to be more precise:
    1- who created mitigation control X
    2- who mitigated risk X for user Y
    etc...
    Im working on an implementation for a client that already had custom ABAP SOD tools that would output reports assigned to different reviewers, each action was tracked through the process and reviewers/approvers had to signoff along the process so people were accountable..
    So far, the only way I found to trace who did what was by the way roles/authorisations will be separated between the Netweaver users, since I'm new to this platform maybe I am missing something.
    Any help is appreciated, thank you
    Jay

    Dear Jay,
    Check the entries in these tables:
    /VIRSA/DTCWKFLOW               Mitigation Work flow Table
    /VIRSA/MITREPORT               Mitigating Reports
    /VIRSA/MITWKFLOW               Mitigation Work flow Table
    /VIRSA/ZMITAPVR                Mitigating Control Monitors
    /VIRSA/ZMITCNTL                Mitigating Control - Users
    /VIRSA/ZMITHROBJ               Mitigating Control - HR Object
    /VIRSA/ZMITMON                 Mitigating Monitors and Approvers
    /VIRSA/ZMITPROF                Mitigating Control - Profile
    /VIRSA/ZMITREF                 Mitigating Controls
    /VIRSA/ZMITREFT                Mitigating Controls Text
    /VIRSA/ZMITROLE                Mitigating Control - Role
    /VIRSA/ZSODMIT                 SOD Group Id and Mitigating Reference Numb
    Regards,
    Naveen.

  • Portal users logon average

    Hi,
    I would like to know if there is a way to find out how many users were logged on to portal yesterday or the users logon average. Anything that could show what is the time when most of the users are on the portal.
    Really appreciate your help.
    Thanks,

    You will get user ids also.
    Check all the alternatives in the portal activity report iview
    open the portal activity report as object
    and in type of report
    check the option 'Details of users who logged on' and give the time period
    Check the below help link for more information
    Creating portal activity report iviews
    http://help.sap.com/saphelp_nw04s/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
    About Portal Activity Reports
    http://help.sap.com/saphelp_nw04s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/frameset.htm
    Raghu

Maybe you are looking for