Verify Time zone in CF server??

In production time zone has changed from CST to EST.But after this change some functionalities are not working as expected.
I need to make sure that the time zone change has reflected in CF server to check whether functionalities are working.  Can any one know how I can verify that the time zone has changed from CST to EST. Through CF admin side or some log files??
Your help is well appreciated.

https://learn.adobe.com/wiki/display/coldfusionen/GetTimeZoneInfo
http://helpx.adobe.com/coldfusion/kb/daylight-savings-time-coldfusion-mx.html

Similar Messages

  • Help with Time Zone on Application Server

    We're running a 9.0.4.2 middle-tier on HP-UX. My users recently told me that the reports being generated are now showing in GMT and they used to be EST. When I run "emctl config agent getTZ" it returns "America/New_York". When I check my TZ environment variable that is set when the AS starts, it's set to "TZ=EST5EDT". When I log into EM, I see the refresh time stamp is +5 hours though, which would explain the date being shown in the reports. I've searched through the Oracle DOC's, but I can't seem to find anything to point me to the problem. Any help would be appreciated.

    Depending on how many rows are in there, you may find the database engine doesn't actually bother using the index at all, it's not until you have thousands of rows it really starts to make a difference.
    Weigh that up with the amount it'll slow down inserts, and you might find it detrimental to create an index. Definitely put in queryparams though, there's never an excuse for not doing that and as Dan says that'll speed things up a bit.

  • Time Zone Redirect Doesn't work on Windows 2008 R2 Terminal Server

    Hello All,
    A client has two Windows 2003 and two Win 2008 R2 Terminal servers.
    When users from a different time zone login to the Win 2003 server, the time zone of the server changes to reflect their own time zone.　 However when they login to the Win 2008 R2 servers, the time zone on the server doesn’t change.
    I already enabled the "Allow time zone redirection" on both Win 2008 R2 Terminal Servers in :
    Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection
    Yet when the clients login to the 2008 server and checks the time on the server, it still shows local/server time and not their own time zone.
    Any input will be appreciated.

    Hi,
    How are things going? I just want to check if the information provided was helpful. If there is any update or concern, please feel free to let us know.
    Best Regards,
    Aiden
    If you have any feedback on our support, please click
    here
    Aiden Cao
    TechNet Community Support

  • Standby server time zone - sync-up with primary

    As we are running our database with physical standby database - Oracle 10.2.0.3, O/S RHEL4 ES
    now the primary database server time zone is set to EST Time Zone and Standby database server is set to PST time Zone
    We would need to Sync-up standby time zone with Primary database server (EST)
    and also the standby server is having 2 instances,
    1. standby instance
    2. independent instance
    We are running rman for both the instances in standby server
    as part of this time sync, we need to bring down both the instances then reset the time zone in standby server as primary and bring both the instances up and run the rman backup.
    is this fine.
    Please let us know if this is fine or do we need to perform anything more.
    Thanks,
    AJ

    Please see the attached screenshot, which is of the last page of the Sync Setup process. It says to backup your Sync Key, and it offers a Print ... button and a Save... button. The correct Sync Key is necessary to recover your data, it is the encryption / decryption key. Sorry, without it your data is useless.

  • PWA site template with warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings"

    SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows message in yellow "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings."
    KB Article http://support.microsoft.com/kb/2749599/en-us suggests applying Windows and SharePoint updates, but does not points to a specific update. Also suggests to enable "Always follow
    web settings" for affected users who are in different time zone than the server time zone, but it does not work either.
    Manjeet Singh

    Hi,
    According to your post, my understanding is that SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings".
    Users are getting this message even after correctly specifying and changing the timezone in their Sharepoint Settings. This is a common problem across the net, but we've found a workaround
    that will eliminate this problem.
    Step 1: Open your Web Database in your Browser
    Step 2: Click the Arrow Under the Login ID (upper right corner)
    Step 3: Choose My Settings
    Step 4: Click the My Regional Settings Link
    Step 5: Uncheck the 'Always Follow Web Settings' check and specify your time zone.
    Step 6: Click OK
    For more information, you can refer to:
    Warning Message about time zone difference between your computer and the regional settings
    of Sha...
    Thanks & Regards,
    Jason Guo
    Jason Guo
    TechNet Community Support

  • SSRS time zone is off on lync reports

    On one of my east coast servers I changed it to the east coast time zone (it was on pacific since it was put in service) and now I get the red text on the reports page letting me know:
    An error happened because the time zone of SQL Server Reporting Services (SSRS) is inconsistent with the time zone of the call detail recording (CDR) database (time zone of SSRS : Eastern Standard
    Time, CDR database : Pacific Standard Time).
    I have tried to right-click on and execute the stored procedure that supposedly fixes this for both the cdr and qoe DBs but when I do so it returns this:
    Msg 547, Level 16, State 0, Procedure RtcClearTimeZoneInfo, Line 6
    The DELETE statement conflicted with the REFERENCE constraint "FK_DaylightSavingYears_1". The conflict occurred in database "QoEMetrics", table "dbo.DaylightSavingYears", column
    'TimeZone'.
    The statement has been terminated.
    (1 row(s) affected)
     The problem is not resolved...

    got error about
    DaylightSavingYears , when used LYNC
    resolved with MICROSOFT TICKET with this workround :
    There are two issues which prevent the successful execution of the stored procedure in Lync 2013.
    There is now a foreign key constraint between the DaylightSavingYears table and the TimeZones table which prevents the TimeZones table from being cleared first.
    There is now a trigger associated with the TimeZoneConfiguration table which requires there always be exactly one row in the table.
    Resolution
    To work around this issue the following SQL query can be run to perform the same action as the stored procedure.  It will execute the operation on both the LcsCDR and QoEMetrics tables.
    USE [LcsCDR]
    GO
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    declare @Status int
    set @Status = 0
    BEGIN TRANSACTION
        DELETE from DaylightSavingYears WITH (TABLOCKX)
        if (@@error <> 0) begin
            ROLLBACK TRANSACTION
        end
     DELETE from TimeZones WITH (TABLOCKX)
        if (@@error <> 0) begin
            ROLLBACK TRANSACTION
        end
     ALTER TABLE TimeZoneConfiguration DISABLE TRIGGER "TimeZoneConfigurationTrigger";
        DELETE from TimeZoneConfiguration WITH (TABLOCKX)
        if (@@error <> 0) begin
            ROLLBACK TRANSACTION
        end
     ALTER TABLE TimeZoneConfiguration ENABLE TRIGGER "TimeZoneConfigurationTrigger";
    COMMIT TRANSACTION
    exec @Status = RtcTruncateSummaryTables
    SELECT @Status
    USE [QoEMetrics]
    GO
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    declare @Status int
    set @Status = 0
    BEGIN TRANSACTION
        DELETE from DaylightSavingYears WITH (TABLOCKX)
        if (@@error <> 0) begin
            ROLLBACK TRANSACTION
        end
     DELETE from TimeZones WITH (TABLOCKX)
        if (@@error <> 0) begin
            ROLLBACK TRANSACTION
        end
     ALTER TABLE TimeZoneConfiguration DISABLE TRIGGER "TimeZoneConfigurationTrigger";
        DELETE from TimeZoneConfiguration WITH (TABLOCKX)
        if (@@error <> 0) begin
            ROLLBACK TRANSACTION
        end
     ALTER TABLE TimeZoneConfiguration ENABLE TRIGGER "TimeZoneConfigurationTrigger";
    COMMIT TRANSACTION
    exec @Status = RtcTruncateSummaryTables
    SELECT @Status
    בני תמותה - מאה ממאה מספר שעד כה לא השתנה

  • Time Zone issues in Global Instance

    Hi,
    Can someone give best practice in addressing issues in Global instance due to change in date & time.
    Say
    1) A user is in America and system time zone is GMT
    2) Order screen: sched ship date shown based on user preference as GMT-5hrs. Say it is 30-Jun-2008 7:30 pm
    3) However, in the back end the data is stored as 1-Jul-2008 12:30 AM
    4) This certainly seems to have an impact to standard date fields.
    5) This also seems to have impact on effectivity dates which don't have timestamp. Eg, pricelist effectivity end date = 30-Jun-2008. The pricelist becomes ineffective at 7 PM EST because of system time zone being GMT.
    Any pointers to address such issues, would be of great help.
    Thanks.
    -bs

    Hi,
    below is an answer from Oracle on similar issue regarding timezones:
    Oracle E-Business Suite version 11i10 or higher
    1 Oracle RDBMS 9i or higher
    2 The database must be configured to use the time zone file
    'timezlrg.dat' rather than the 'timezone.dat' file
    3 The database must be started in the standard corporate time zone
    4 Profile 'Server Timezone' (SERVER_TIMEZONE_ID) must be set at the Site
    level, and must be set to the same standard corporate time zone as the
    database
    5 Profile 'Client Timezone' (CLIENT_TIMEZONE_ID) must be set at the user
    level
    6 Profile 'Enable Timezone Conversions' (ENABLE_TIMEZONE_CONVERSIONS)
    must be set to 'Yes' ('Y') at the Site level.
    7 Profile 'Concurrent: Multiple Time Zones' (CONC_MULTI_TZ) should be
    set to 'No' (N) at the Site level
    8 Environment variable FORMS60_APPSLIBS must be set in the Forms tier
    (this has always been a requirement for 11i)
    9 Forms must be launched through the Personal Home Page or Navigate portlet
    Additionally check these notes:
    Note 330075.1
    Note:188059.1
    malin

  • Time Zone issue with 7.0 and DB2

    Hi,
    We are having a time zone issue with weblogic server 7.0 and DB2 database. I would really appreciate if somebody provides a solution for this issue.
    Our db2 DB is located in PST time zone and weblogic server is located in EST time zone.
    When we access current timestamp from db2, we are getting PST time converted to EST and EST time zone attached with timestamp value.
    I tried to use resultset.getTimeStamp (1,<calendar>), unfortunately this method is not supported in the DB2 driver version I am using.
    We want to get same value as returned by db2 with db2 time zone not weblogic server time zone.
    And also when we add new record with timestamp column through web service, regardless the time zone value sent by web service client ".Net" ,
    Weblogic server converts the java.util.Date value to weblogic time zone and stores in the db.
    For example, client sent 17:00 hours CST, but when it gets stored in db through weblogic ws, weblogic converts 17:00 to 18:00 EST and stores in database as 18:00 hours without any time zone. When we read this value back, we are getting it 18:00 EST only not 17:00 CST.
    This is fine as long as writing and reading by same weblogic server. If another weblogic server instance in PST time zone read this value, it takes as 18:00 PST.
    Due to this our application always shows timestamp hours differently.
    Could some body help me to fix this problem, we are getting this problem in production after we moved our DB2 location to different time zone.
    Thanks
    Balaji

    Hi,
    Check whether document in the link below is of any use for you..
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFTIM/CAGTFTIM.pdf
    Regards
    K.M.Arun

  • Change the Time Zone???

    Hi,
          I need to change the System Time Zone to all the users in the XI environment but I don't remember how is the process...
    Someone can explain me how is it?
    Thanks!

    Hi Hetal,
          Thanks for ur fast response but the problem is not the Time Zone in the server (UNIX), is in the application. I remember that I need to go to IMG --> General Settings --> Time Zones but I don't know if I need to do something more to assign the TZ to all the users in the system.
    Regards!

  • How to retrieve Calender object without Time Zone.

    I need to Generate the xml file with JAXB. JAXB requires the Calendar class for the Calendar class. So i am converting the Date Object into the claendar Object as follows.
    Calendar calendar = Calendar.getInstance();
    calendar.setTime(date) // date is the parameter
    return date;
    It was taking the default Time zone and creating the XML element as
    <Resource employmentType="Employee" externalId="104718"
    hireDate="2000-02-29+05:30" includeInDatamart="true"
    isActive="true">
    But i need hireDate="2000-02-29" without the time zone.
    In server side it accepts the "yyyy-mm-dd" formate only.

    I need to Generate the xml file with JAXB. JAXB
    requires the Calendar class for the Calendar class.
    So i am converting the Date Object into the claendar
    Object as follows.
    Calendar calendar = Calendar.getInstance();
    calendar.setTime(date) // date is the parameter
    return date;use this
    //return date;
    return calendar.getTime();
    s taking the default Time zone and creating the XML
    element as
    <Resource employmentType="Employee"
    externalId="104718"
    hireDate="2000-02-29+05:30"
    includeInDatamart="true"
    isActive="true">
    d hireDate="2000-02-29" without the time zone.
    In server side it accepts the "yyyy-mm-dd" formate
    only.

  • Iphone 4s exchange calendar time zones

    I have a user with an iphone 4s and the time zones are not matching up when entering calendar events into Outlook (synching via Exchange on the iphone). all events entered into the outlook calendar are set to eastern time zones and we are in st. louis (central time zone). However, our server is hosted in the eastern time zone. Now, our hosting provider has set the time zone of our server to the central time zone so that should take care of the server side. what other things can we check to determine why the wrong time zone is being set?

    FOR CORRECT TIME ON CALENDAR:
    Set both the time and your time zone on the Calendar Add Event page.
    Set your time zone in Settings>Mail, Contacts, Calendar>Time Zone Support.
    Set your time zone in Settings>General>Date and Time.

  • SQL Server Time Zone settings

    Hi Folks,
      I am looking for some help on how we will handle time zone setting in a SQL Cluster.  We currently have a six node SQL cluster with multiple instances running on it.  I have been asked to supply a new Instance for a new project but the problem
    is the users that will be using it are based in New Zealand and We are located in Dublin!  They will be using a Dynamics Navision database on this Instance.  So my question is can I set the time zone different on this new Instance to their time,
    cant seem to find any details this.  Most of the documentation seems to indicate you use the datetimeoffset feature or its usually handled within the Application.  I am hoping its the latter but any help on this would be grateful, especially if somebody
    had experience with the issue before.
    Thanks
    TD

    That's quite the time difference, hope you're not on-call ;)
    SQL Server doesn't maintain it's own time, it just inherits it from Windows, so in this case you'll have to leave the time as-is and allow the app to handle it. I've previously worked with navision over two time zones (only a one hour difference though) and
    I believe it maintains dates in UTC.
    Just be careful that any custom code you run in SQL Server jobs, etc also uses UTC.
    Edit: The
    Nav datetime is stored in UTC
    A DateTime is stored in the database as Coordinated Universal Time (UTC). 

  • XMII 12.x  Can you get the Server's Time Zone from a webservice call?

    Is there a MII / NW webservice call to get the server's time zone?

    After thinking about it a little my best approach was just a simple JSP page, because I really was more intersted in the servers GMT offset.
    <%@page import="java.util.*" %>          
    <%
    Calendar myCalendar = new GregorianCalendar();  
    int gmtOffset = (myCalendar.get(Calendar.ZONE_OFFSET) + myCalendar.get(Calendar.DST_OFFSET))/(1000 * 3600); 
    %>
    <%=gmtOffset %>

  • Time zone Inbox (user vs. server)

    We created the users and defined your specific time zone (su01), when the user login to the portal and created documents the time displayed its correct (zone depending), nevertheless when the same user access to the portal inbox, the filter is by server time zone, how can i define the inbox filter by time zone of the login user???

    Hi Egor,
    > I know, http-browser transmits time zone information
    > in http-request
    IE? If I call www.google.com, I cannot see the TZ anywhere, checked by HTTPWatch. There is also no corresponding setting within IE. You could only map prefered languages to locales, but that doesn't work really proper, for they work over different time zones.
    Also see http://www.timeanddate.com/worldclock - no automatic detection.
    Also see http://www.javaworld.com/javaforums/showflat.php?Cat=&Board=Enterprisejava&Number=12640&page=1&view=collapsed&sb=9&o=&fpart=1
    So I would suggest to use the user's time zone, and if not set, to use the server's time. It's the fault of the user admins if the time zone is not set!
    > Both functions don't return time zone information
    Right. And as said, mapping the locale to a time zone is a (bad) workaround, nothing I would advise.
    Hope it helps
    Detlev

  • JDKs in weblogic server return wrong time zone

    Hi , i am running weblogic server 8.1.4, 8.1.6 and 10 on my windows vista
    all of the JDK bundled (both Sun's and JRockit) return GMT instead of my local time zone when i call Timezone.getDefault()
    I am quite sure the operating system has set to correct time zone because my self installed JDK (downloaded from sun) works properly (return correct local time zone)
    is that i have missed anything?
    please help.

    I am noticing the same problem with iCal events imported from Orbitz. The thing is that the more I look into it the more I think this is meant as a feature, not a bug. Go into iCal preferences > Advanced and uncheck "Turn on time zone support". Import the event again and this time both the graphic view and the Get Info view will display the same information.
    It appears that this setting is meant to be useful if you travel to different time zones a lot. Basically, with it you get a time zone dropdown menu in iCal. So when you are in a different time zone you can select it from the dropdown and it will show what time your events occur in your new local time. Just keep in mind that when you create a new event it will be created based on the time zone you have selected. So if you are in California and have selected that time zone but you are adding an entry for a meeting you have when you are back in New York make sure that you select the correct time zone when creating that meeting because by default it will be created in California time and when you return to New York and switch your calendar back it will show the event at the wrong time.
    Frank

Maybe you are looking for