VerifyError: Error #1014 (class could not be found)

I have a Flash Pro CS5 project that I have built some classes for in Flash Builder using some of the mx classes, like ArrayCollection and HTTPService. I have a Flash Project in my Flash Builder 4.0 pointing to the Flash Pro project. I started out by adding the Library Path to the Flex SDK 4.0.0 in my Flash project paths. Things seemed to work fine at first but now I am getting the following error:
VerifyError: Error #1014: Class mx.collections::ArrayCollection could not be found
If I change all my ArrayCollections to be just Arrays, then the same error just cascades down the list of "missing" mx classes, like HTTPService, etc. I individually added the the framework.swc, the rpc.swc and even the framework_rb.swc and rpc_rb.swc files to the paths but with the same error results.
I'm trying to set up a relatively smooth workflow between Flash developers and Flex developers on my team but this is a huge roadblock.
I have looked all over and not found a good solution for this problem. Can anyone help?
Dana

I figured out a solution. It had to do with conflicting or out of order library paths, I think. There were several paths to other projects in the project and Flash Pro global paths. I think some of them are automatically added by either the FP or the FB IDEs. When I removed all of the unnecessary paths, then it compiled just fine.

Similar Messages

My air app gives VerifyError: Error #1014: Class flash.events::SoftKeyboardEvent could not be found.

Hi,
I'm devlopping an air application, MacOSX 10.6.8, flex4.5.1 and air 2.6, suddenly the application will not start anymore, giving the following error:
VerifyError: Error #1014: Class flash.events::SoftKeyboardEvent could not be found.
          at spark.automation.delegates.components.supportClasses::SparkSkinnableTextBaseAutomationImp l$/init()[E:\dev\4.5.1\frameworks\projects\automation_spark\src\spark\automation\delegates \components\supportClasses\SparkSkinnableTextBaseAutomationImpl.as:73]
          at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::kickOff()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\managers\SystemManager.as:2821]
          at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\managers\SystemManager.as:2729]
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at mx.preloaders::Preloader/timerHandler()[E:\dev\4.5.1\frameworks\projects\framework\src\mx \preloaders\Preloader.as:542]
          at flash.utils::Timer/_timerDispatch()
          at flash.utils::Timer/tick()
A colleague with the same setup has no problems. Also when i create a new air project in flashbuilder it will not start either, but not throwing the error.
Anyone with the same problems? Or anyone who knows what might be the cause?
kind regards,
Arjen Veneman

Found the solution. We had to add swf-version=11 in our flex config. Odd that we should have to start doing that now all of a sudden (we weren't setting that explicitly before). Seems like a bug in the SDK.

VerifyError: Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.

Hi
In the adobe help there is much talk about AEC and sample codes for AEC.
I have downloaded flex sdk 4.5 ,AIR SDK 2.6 which are most recent builds.Installed Flash player 10.3 and AIR runtime 2.7 release candidate.
While using the following code for echo supression:
var mic:Microphone = Microphone.getEnhancedMicrophone();
mic = Microphone.getEnhancedMicrophone(0);
var options:MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
options.mode = MicrophoneEnhancedMode.FULL_DUPLEX;
options.autoGain = false;
options.echoPath = 128;
options.nonLinearProcessing = true;
mic.enhancedOptions = options;
the following error occurs both in Web version as well as AIR version.
I have included the playerglobal.swc in both the version of applications in the folder frameworks\libs\player\10.3
In both case it is giving the following error:
[SWF] AudioChatClient_1.swf - 2,683,701 bytes after decompression
typecheck AudioChatClient_1/startPubishing()
   outer-scope = [global Object$ flash.events::EventDispatcher$ flash.display::DisplayObject$ flash.display::InteractiveObject$ flash.display::DisplayObjectContainer$ flash.display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ spark.components.supportClasses::SkinnableComponent$ spark.components.supportClasses::SkinnableContainerBase$ spark.components::SkinnableContainer$ spark.components::Application$ spark.components::WindowedApplication$ AudioChatClient_1$]
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
0:debugfile "D:\ECLIPSE_WORKSPACE\FLASH_BUILDER\AudioChat\src;;AudioChatClient_1. mxml"
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
2:debugline 54
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
4:getlocal0
                       [AudioChatClient_1~[O] *[A] *[A]] {} (AudioChatClient_1~[O])
5:pushscope
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} ()
6:pushnull
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} (null[O])
7:coerce flash.media::Microphone
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} (flash.media::Microphone[O])
9:setlocal1
                       [AudioChatClient_1~[O] flash.media::Microphone[O] *[A]] {AudioChatClient_1~[O]} ()
10:pushnull
                       [AudioChatClient_1~[O] flash.media::Microphone[O] *[A]] {AudioChatClient_1~[O]} (null[O])
11:coerce flash.media::MicrophoneEnhancedOptions
VerifyError: Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.
    at AudioChatClient_1/__pub_btn_click()[D:\ECLIPSE_WORKSPACE\FLASH_BUILDE R\AudioChat\src\AudioChatClient_1.mxml:144]
My system specifications are:
OS: Microsoft Windows XP SP3
Intel Core 2 duo Processor with 2 GB RAM
Flash Builder 4.0
If possible could you provide the information of AIR SDK 2.7
Thanks
Sudhansu Sekhar Rana

Hi
me to...
While using the following code for echo supression:
var options:MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
VerifyError: Error #1014: 无法找到类 flash.media::MicrophoneEnhancedOptions。
OS: Microsoft Windows XP SP3
Intel Core 2 duo Processor with 2 GB RAM
Flash Builder 4.5
Adobe Flash Player 10.3
Adobe Flash Media Server 3.5.2
10.3 playerglobal.swc
If who have already solved the method, please point out bottom.
     Thanks
QQ:52275313
Email:[email protected]

VerifyError: Error #1014: Class flash.events::NativeWindowBoundsEvent could not be found.

When I run project from FB 3, it works but on Double click on
the .swf gives the error
VerifyError: Error #1014: Class
flash.events::NativeWindowBoundsEvent could not be found.
What is problem and solution of it.
Thanks

We had a similar problem in my project. Took a lot of research and trial and error, but we finally narrowed it down to the resource.properties file. Turns out that if the file gets too big it causes this problem. Extending the timeout doesn't help. You have to break your resource.properties into more granular files to reduce the file size. This seems to fix the problem. We have had it happen several times since then and we know how to fix it, so we get it fixed pretty quickly.
Not sure if this will fix your problem, but it fixed ours.

VerifyError: Error #1014: Class flash.display3D::Context3D could not be found.

Weird. I have the Player Incubator installed (it shows up as "Incubator build" in the bottom left hand corner) in browser, for Flash Builder and for Flash 5. On all of these when I try to run, for example, this source...
http://blog.kaourantin.net/?p=104&cpage=1#comment-2119
....I get error message:
VerifyError: Error #1014: Class flash.display3D::Program3D could not be found.
or
VerifyError: Error #1014: Class flash.display3D::Context3D could not be found (on Away3D examples)
It compiles fine, but the player doesn't seem to recognise the MoleHill classes.
Any ideas?
Thanks,
Richard

I ended up running into this issue as well so I wrote a sort of psuedo standalone debugger player. Works perfect, I posted it in a thread here:
http://forums.adobe.com/thread/798002?tstart=0
Theres a video tutorial and tons of more nfo on my blog post about it here:
http://blog.ascensionsystems.ca/?p=147
And I've also just released the source code for those interested:
http://blog.ascensionsystems.ca/?p=153
If you follow the instructions in my blog, you won't get this error anymore and will be able to run/test/debug your movies normally. Hope this is helpful! If you find it to be, tell people so my days' work isn't in vain! lol

OSMF 1.5 - VerifyError: Error #1014: Class org.osmf.media::MediaFactory could not be found.

Hi
I'm compiled osmf 1.5 player - OSMFPlayer project for http streaming, using chromeLlibrary and OSMF.swc. I generated OSMFPlayer.swf without any errors, but when I'm trying to use this file I get a lot of errors with the player
VerifyError: Error #1014: Class org.osmf.media::MediaFactory could not be found.
VerifyError: Error #1014: Class ILayoutTarget could not be found.
VerifyError: Error #1014: Class org.osmf.layout::LayoutTargetSprite could not be found.
etc..
Can anyone please explain anything I need to do at compile time to get these errors fixed.
Vishal

this has been answered here: http://forums.adobe.com/message/3297456

Intermittent "VerifyError: Error #1014: Class MyPackage::MyClass could not be found." at runtime.

VerifyError: Error #1014: Class MyPackage::MyClass could not be found.
[SWF] DesktopSwf.swf - 3,226,951 bytes after decompression
My team and I are seeing a high frequency of these errors when running our ActionScript Project. The package and class referenced in the error switches between roughly a dozen different classes. At times, I'll go a whole day without running into this. Other times, I'll lose much of the day to it. Sometimes a full clean/build causes the error to appear/disappear. Sometimes restarting FlashBuilder appears to help. Sometimes deleting and re-importing all project helps. Sometimes nothing helps but the passage of time. We've basically resorted to superstition in our attempts to work around this.
The project is pure ActionScript (no Flex), using Flash Builder 4.7 and AIR SDK 3.7.0 build 1760. The error occurs on Mac and PC. The application project depends on a hierarchy of ActionScript Library Projects. The class being referenced in the error lives in one of these library projects, but not always the same one. I've tried a couple of different linkage paradigms with the library projects, but it hasn't made a difference. The error does not occur in builds created by our Ant script. Our library projects used to be Flex Projects, and we never saw this error. We believe our problems started after switching to using ActionScript Projects for everything. We'd prefer not to go back to relying on Flex.
Has anyone else run into something like this? Any ideas on what I could try?

I figured out a solution. It had to do with conflicting or out of order library paths, I think. There were several paths to other projects in the project and Flash Pro global paths. I think some of them are automatically added by either the FP or the FB IDEs. When I removed all of the unnecessary paths, then it compiled just fine.

Crystal report error (The table '' could not be found)

Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.

Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie

Quick time error "a file could not be found"

Quick time error "a file could not be found" when trying to open a file that exist in a directory name including hebrew characters.
When copying the same file to other directory with english characters only, file opens without any problem.
This is very frustrating since my files are located under My documents directory
The full path of the "My Document" directory is:
C:\Documents and Settings\אלון\My Documents.
Also, I have IPOD 5G (with video). iTunes does not have any problems with audio files located under the above directory, but video files for my IPOD have the same problem (since probably it is using Quick time). The problem with iTunes is more frustrating since it does not report any error, but you just cant update video podcasts or add video files to library.
I spent a few days to uderstand this.
Windows XP

http://discussions.apple.com/thread.jspa?threadID=769732
This is a old post from when I had recieved the Error-43 file could not be found. In my case I had a drive lettered F:\ F:\ when changing the drive to a single letter F:\ it resolved the problem, so something you might want to take a look at.

I recently upgraded computer to windows 7. When I open itunes I am able to see my music library, but unable to play. Gives an error message of "Could not be found". How do I retrieve my library contents?

I recently upgraded computer to Windows 7. When I open itunes I am able to see my music library, but unable to play. Gives an error message of "Could not be found". How do I retrieve my library contents?

Hello ehoff5,
I would be concerned too if I was not able to play my music in iTunes. It sounds like the music files may be in a location that iTunes is not expecting. I recommend reviewing the following articles to locate you music files on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Thank you for using Apple Support Communities.
Best,
Sheila M.

Class could not be found error

Hi All,
I'm trying to implement the BADI NETW_USER_FIELDS_F4 to be able to define a search help for an user field in transaction CJ20N.
The Badi implemenation, class are active. But upon executing the F4 help, the program dumps with the following description
" CREATE OBJECT: Class "\CLASS=CL_EX_NETW_USER_FIELDS_F4" could not be found. "
The dump is from the get_instance method at the following line -
CREATE OBJECT exit TYPE (abs_type_classname).
The parameter 'exit' which is a type ref to object returns "illegal reference". Not sure where am I making the mistake.
Pls note that the dump is even before the program reaches the BADI implementation, so the code I have in the AT_F4 method is not of significance I suppose.
Any help would be highly appreciated.
Thanks
Uday

Hi
Try to see the <a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=865187">note 865187</a>, it could be helpful for you.
If you can't see the note, this is an extract:
Summary
Symptom
You have implemented BAdI NETW_USER_FIELDS_F4 to provide F4 help for Network Activity User Fields.
You go to transaction CJ20N or CN22 and press 'F4' on a Network Activity User Field. Short Dump occurs because of
Runtime errors CREATE_OBJECT_CLASS_NOT_FOUND
Exception CX_SY_CREATE_OBJECT_ERROR
OR
You go to transaction SE18 and do a Check(CTRL + F2) on BAdI NETW_USER_FIELDS_F4. The system gives a Message:
Message no. ENHANCEMENT367
"BAdI class CL_EX_NETW_USER_FIELDS_F4 does not exist."
Other terms
BAdI NETW_USER_FIELDS_F4, BAdI class CL_EX_NETW_USER_FIELDS_F4 does not exist, F4 help for Network Activity User Fields
Reason and Prerequisites
This is because BAdI Adapter Class CL_EX_NETW_USER_FIELDS_F4 is not present.
Solution
You will have to create the exit class by performing the following steps:
1. Go to Transaction SE18.
2. Enter BAdI Definition name NETW_USER_FIELDS_F4.
3. Go to menu path Utilities->Regeneration.
Now the BAdI class CL_EX_NETW_USER_FIELDS_F4 should get generated.
Max

Error: Class could not be found.

I was trying the JNI tutorial, copied and pasted the HelloWorld.java program, compiled it. Then when I was trying to run the javah -jni command, it gave me this error "Error: Class HelloWorld could not be found". I am 100% sure that the class file was in the folder. Anyone else have this problem?
Thanks!

I got it.... by adding -classpath .

Javah problem - super class could not be found !!

Hi all,
i have already posted this message but i didn't get enough help to solve my poor situation.
and this is my problem:
i got in my project (myProject) MyClass class.
i wrote in another java class ,in OtherClass.class ,jni function that use MyClass object as parameter to the jni interface, as follow:
private native int myFunction (MyClass obj); //function in OtherClass
when i write the javah command line :
javah -jni OtherClass (in order to create OtherClass.h)
i always get the following error:
A required super class myPackage.MyClass could not be found.
my qoustion is how can i let the javah command line to know about the existence of myPackage.MyClass and how can i create and .h file when i using other class instance as jni function parameter in other class??
Thanks Sendy.

Lets define a few terms here.
Java can be a java virtual machine which is what runs when you type 'java' on the command line. It is also represented by the compiler which runs when you type 'javac'. And in your case it also is represented by 'javah'.
The class path defines where java finds classes that it needs.
In older versions of java you had to tell it where to find everything. It couldn't even find java.lang.String unless you told it were it was. Now days you have to tell it where to find stuff that you add (or where 3rd party libraries are.)
There are two ways to define the class path: a command line option and an environment variable.
A class path can, currently, have three types of things in it:
-A path to a zip file
-A path to a jar file
-A path
For example
-Path to zip file in windows: C:\mystuff\mylib\mystuff.zip
-Path to zip file in unix: /opt/system/projects/mystuff/mystuff.zip
-Path to jar file in windows: C:\mystuff\mylib\myjar.jar
-Path to jar file in unix: /opt/system/projects/mystuff/myjar.jar
-Path in windows: C:\mystuff\mylib
-Path in unix: /opt/system/projects/mystuff
Zip files aren't used as much anymore, but you should at least be aware of them.
Java uses the class path to look for classes which are stored in files. It does this by translating the class name into a file name. It uses packages as directory names and class names as file names. So in your case it would try to find a class called myPackage.MyClass in a file called myPackage\MyClass.class. It would try to find that in any zip files, jar files, in in any paths that you specified in the class path.
So java is trying to find myPackage\MyClass.class in your class path. It would try to find that in any zip files, jar files, in in any paths that you specified in the class path.
Right now your class path is probably just "." which means that if you do the following commands
cd C:\mystuff
javah -jni OtherClass
Then java is going to try to find myPackage.MyClass in the following file
.\myPackage\MyClass.class
That, because you 'cd' to C:\mystuff, translates to the following absolute path
C:\mystuff\myPackage\MyClass.class
So if java doesn't find that file then it is going to tell you that it can't find the file.
So where is your file? Let's say it is here.
C:\work\lib\myPackage\MyClass.class
So you must tell javah where the root is. Keep in mind that 'myPackage' must be part of the path. That is not optional. The root is the directory above 'myPackage'. So the root is
C:\work\lib
So now you have a path that is ready for your class path. So your javah command could look like this
javah -classpath ".;C:\work\lib" -jni OtherClass
Or using an environment variable
set CLASSPATH=.;C:\work\lib
javah -jni OtherClass
Keep in mind in the above that class path is a generic term and there can be other ways to define it. For example the Sun command "java" allows you to use "-classpath" or "-cp".
So does the above help?

Error message: Table could not be found when opening reports with InfoView or CMC

Post Author: Giovanni
CA Forum: Authentication
Hi All,
I have Crystal Reports Server XI R2 installed on a server and the database folder (foxpro) is located on a different server. Crystal is connected to the database using an ODBC connection (UNC path).
When I try to preview a report in Infoview or CMC I get the following error: "There was an error retrieving data from the server: The table 'dp' could not be found. Error in File C:\WINDOWS\TEMP\{BC665D6D-95DE-426B-A7A2-EBF9D23F42F4}.rpt: The table could not be found."
dp is the name of one of our tables.
If I publish a report that uses sql database or a foxpro db that is located on the same server as Crystal Server I donu2019t receive any error message..
Please help if you can and thanks in advance.
Giovanni

Post Author: colin mackenzie
CA Forum: Authentication
Hi Giovanni.
This post of yours is going on 2 weeks old.
Have you solved your problem?

Workflow error " Work item could not be found"

Hi Experts,
I used transaction SWI2_DIAG to diagnose the error and tried to restart the workitem manually .The changes were made to Org chart and now everything is fine but I am still getting error message:
Work item could not be found
Workflow 'Post with Clearing Workflow' step number 4: work item could not be created
Agent determination for step '0000000004' failed
Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
Resolution of rule AC00000168 for task TS93000019: no agent found
Can someone explain what this error message mean and why i cant restart the workitem manually?
Thanks.

This is my message from Production:
Resolution of rule AC00000168 for task TS93000019: no agent found
Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
Agent determination for step '0000000004' failed
Workflow 'Post with Clearing Workflow' step number 4: _work item could not be created_
This is my message from development.. I recreted the scenario and getting different message.
Workflow 'Journal Entry Approval- Approval WF' step number 36: work item could not be created
Agent determination for step '0000000036' failed
Workflow WS93000001 no. 000000986124 activity 0000000036 role 'AC93000003': No agent found
Resolution of rule AC93000003 for task TS00007914: _no agent found_
Edited by: Sergey on Nov 2, 2010 5:05 PM

VerifyError: Error #1014 (class could not be found)

Similar Messages

Maybe you are looking for