Version Mismatch for Kernel and CPU after 10.6.4 update

I had a kernel panic in both Mac Pro and MacBook Pro after a usually no-brainer software update OS X 10.6.4....I tried all of the shortcuts (zapping PRAM, booting from other drives, safemode, etc) and I get the dreaded gray screen and restart message immediately,,,what can I do short of purchasing a new board for each machine?
I did disk verification and repairs via target disk mode from a third laptop, but the pro macs never get past the grey screen in order to give me the chance to update! The screen text says:
"panic(cpu 0 caller 0x2x096e6) Version mismatch between Kernel and CPU PM"@/Source Cache/...
Debugger called: <panic>"
What can I do to GET PAST the "version mismatch" and "ned to restart" screen to be ABLE to update?

Just tried installing the 10.6.4 update on my iMac i5. It began the usual shutdown, and I was expecting the install to begin. That never happened. 10 minutes went by at least. I forced it to shut down, and now it won't boot. Same as the OP - "Version mis-match between Kernel and CPU PM"
There is no option to boot from anything else, either. The machine won't boot from an original install CD, or from an install image I keep on USB. I tried zapping PRAM, and resetting SMC. At this point, I consider it bricked. Fortunately, I have a reasonably recent TM backup.
Won't have time to take it in until Monday. Sure hope someone has some insight before then.

Similar Messages

I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

Look in the HD/Applications folder.

Version mgmnt for RFQ and PO

Dear gurus,
pls explain about version management for RFQ and PO
pls explain in detail

SPRO > Material Management > Purchasing -> Version Management .
After activating version management you can see the Version tab in ME53N near to source of supply tab in PR.
http://help.sap.com/saphelp_srm30/helpdata/en/46/882fdd8bfc1743bd5ef8b532f94402/content.htm
SAP Enterprise Buyer provides you with version management for purchasing documents. As a first step, you can display versions of purchase orders and contracts.
The system creates a version in the background if you, as a purchaser, carry out one of the following actions:
· You change a posted purchase order
· You order a posted purchase order again
· You change a contract that has already been released
· You release an already released contract again
In contrast to the change documents that retain a change history, a version displays the status of a document at a specific point in time.
Version management provides a check for you as a purchaser, for example, if you wish to display a purchase order in the form in which you transferred it to the vendor on day X. A version provides clarity, for example, in negotiations on a contract.
Features
You can use versions as follows:
· Display
· Compare and list differences in tabular form. The comparison result has separate areas that can be displayed:
Header data (including organizational data, tax and payment data; partner data and documents)
Item data (including taxes and limits if they exist; partner data, documents; account assignment and conditions)
· Archive, if it relates to transaction data (you can archive versions of purchase orders, but not contract versions)
You cannot change or output versions. This is only possible for the active document.
Also, visit the following thread:

Is it bad for Fans and CPU?

Hey guys,
     I'm currently using a mid-2012 15" Retina MacBook Pro with 2.6 GHz + 16GB of ram. I've been really wanting to use the SETI home application. This application basically uses your CPU's power and GPU's power at 100% (unless you're doing something else)
     Obviously, with CPU + GPU at 100%, the fans are going to kick on. My question is, is it bad to run the computer at 100% capacity for GPU and CPU? Will this damage the fans over time?
     I'm talking about leaving the computer on for hours at a time and letting it do its thing. There's a very good chance it will be hot for several hours with the fans on for several hours.
     On a previous Retina MacBook Pro I owned, I tried this and processor reached 212 degrees F (boiling point for water) and 180 F for GPU. Fans were on all the time.
     Is this bad and how bad is it?
Thanks a lot.

You're doing what some could call a burn-in run. Where you get everything hot and sustain that usage for long periods of time. The Mac can handle that, I have used older MBP's for the IT field and they had to process tons of data, they got hot, but I let them cool down at night.
The fans won't get damaged, its a solid-state motor, unless you stick something in the fan...
The thermal paste on the CPU/GPU may degrade quicker though. That is my one hesitation about dedicating this machine to that.
I should note, that the heat and the power consumption is going to take it's toll on your electric bill too.
85 watts * ~6 run hours per day = about $40 more on the bill.

I've lost half of my icons such as calculator, fonts, chess, automator,ichat,ical it it saying that you can use this version with the OSX. You have version 4.04. And, there is no way to update them. What do you do?

I've lost half of my icons such as calculator, fonts, chess, automator,ichat,ical it it saying that you can use this version with the OSX. You have version 4.04. And, there is no way to update them. What do you do?

If I'm understanding you correctly, those apps have stopped working and you are getting a message saying that they won't work with this version of Mac OS X when you try to open them. Is that right? If so, have you moved those apps out of their original locations? That is a bad idea, as it prevents them from being properly updated. If this is what has happened, what version of the system were you running before they stopped working, and what version are you running now, after installing the update that has made them stop working?

HT1338 I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

10.5.8 is the last release for OS X 10.5.
If you want to upgrade your operating system, you have to buy it, and it's not available via download. The next upgrade for you would be to OS X Snow Leopard 10.6. In the US, call the Apple online store at 800-MY-APPLE and order 10.6 from the legacy products list. They will send you a DVD, which you can install, then use Software Update to get to the last release of 10.6.8.
If you want to upgrade further, and your sytsem will support it, you can call the Apple online store again to buy Lion or you can connect to the App Store to buy and download Mountain Lion. If your system will support Lion or ML, you probably should have 4GB of memory for reasonable performance.

After updating my IOS TO 8.1 (12B411) on 10/23/14, I went to update my blood sugar level in the IHealth app. And now after the new IOS update I'm unable to find the blood glucose option in the IHealth app. Did Apple remove it or just mess up AGAIN?

fter updating my IOS TO 8.1 (12B411) on 10/23/14, I went to update my blood sugar level in the IHealth app. And now after the new IOS update I'm unable to find the blood glucose option in the IHealth app. Did Apple remove it or just mess up AGAIN?

Apple removed blood glucose until further notice. The reason behind this is that it gave a distorted picture in countries where the medical world used other measuring units. I suspect it will be available again in a future update.

My Ipod Touch has Software Version 4.2.1 and says that there is no update available. Yet I see that IOS 5 is out.. Why is it that my Ipod says no update is available or that my Ipod is up to date?

My Ipod Touch has Software Version 4.2.1 and says that there is no Update available. Yet I see that IOS 5.0 is out. Why does my Ipod say that there is no update available and my Ipod is up to date yet there is newer software available?

Because you have an older model that is not upgradable to iOS 5.x.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

Apps are tied to the Apple ID that was used to purchase them and you will always need to use that ID and password in order to update them.
Saying that you do get to update them on your new details makes no sense at all.

I have been given a mac os x version 10.4.11 and cannot get a flash layer update to download what ca

I have been given a mac os x version 10.4.11 and cannot get a flash layer update to download what can i do ? please help!

Is this a Power PC based mac? If so, please see this FAQ:
What version of Flash Player should I use with my Power PC based Mac?

Hyper-V Resource Pools for Memory and CPU

Hi all,
I'm trying to understand the concepts and details of resource pools in Hyper-V in Windows Server 2012. It seems as if there is almost no documentation on all that. Perhaps somebody can support me here, maybe I've not seen some docs yet.
So far, I learned that resource pools in their current implementation serve mainly for metering purposes. You can create pools per tenant and then group VM resources into those pools to facilitate resource metering per tenant. That is, you enable metering
once per pool and get all the data necessary to bill that one customer for all their resources (without metering individual VMs). Is that correct?
Furthermore, it seems to me that an ethernet pool goes one step further by providing an abstraction level for virtual switches. As far as I've understood you can add multiple vSwitches to a pool and then connect a VM to the pool. Hyper-V then decides which
actual switch to use. This may be handy in a multi-host environment if vSwitches on different hosts use different names although they connect to the same network. Is that correct?
So - talking about actually managing that stuff I've learned how to create a pool and how to add VHD locations and virtual switches to a pool. Enabling resource metering for a pool then collects usage data from all the resources inside that pool.
But now: I can create a pool for memory and a pool for CPU. But I cannot add resources to those. Neither can I add a complete VM to a pool. Now I'm launching a VM that belongs to a customer whose resources I'm metering. How will Hyper-V know that it's
supposed to collect data on CPU and memory usage for that VM?
Am I missing something here? Or is pool-based metering only good for ethernet and VHD resources, and CPU and memory still need to be metered per VM?
Thanks for clarification,
Nils
Nils Kaczenski
MVP Directory Services
Hannover, Germany

Thank you for the links. I already knew those, and unfortunately they are not matching my question. Two of them are about Windows Server 2008/R2, and one only lists a WMI interface. What I'm after is a new feature in Windows Server 2012, and I need conceptional
information.
Thanks for the research anyway. I appreciate that a lot!
In the meantime I've gotten quite far in my own research. See my entry above of January 7th. Some additions:
In Windows Server 2012, Hyper-V resource pools are mainly for metering purposes. You cannot compare them to resource pools in VMware.
A resource pool in Hyper-V (2012) facilitates resource metering and billing for VM usage especially in hosting scenarios. You can either measure resource usage for single VMs, or you can group existing resources (such as CPU power, RAM, virtual hard disk
storage, Ethernet traffic) into pools. Those pools will mostly be assigned to one customer each. That way you can bill the customer for their resource usage in a given time period by just querying the customer's pool.
Metering only collects aggregated data with one value per resource (i.e. overall CPU usage, maximum VHD storage, summed Ethernet traffic and so on). You can control the time period by explicitly resetting the counter at any given time (a day, a week, a
month or what you like).
There is no detailed data. The aggregate values serve as a basis for billing, not as monitoring data. If you need detailed monitoring data use Performance Monitor.
There is currently only one type of resource pool that adds an abstraction layer to a virtualization farm, and that is the Ethernet type. You can use that type for metering, but you can also use it to group a number of virtual switches (that connect to
the same network segment) and then a VM connected to that pool will automatically use an appropriate virtual switch from the pool. You need no longer worry about virtual switch names across multiple hosts as long as all equivalent virtual switches are
added to the pool.
While you can manage two types of pool resources in the GUI (VHD pools and Ethernet pools) you should only manage resource pools via PowerShell. Only there will you be able to control what happens. And only PowerShell provides a means to start, stop, and
reset metering and query metering data.
The process to use resource pools in Hyper-V (2012) in short:
First create a new pool via PowerShell (New-VMResourcePool). (In case of a VHD pool you must specify the VHD storage paths to add to the pool in the moment you create the pool.)
In case of an Ethernet pool add existing virtual switches to the pool (Add-VMSwitch).
Reconfigure existing VMs that you want to measure so that they use resources from the pool. The PowerShell
Set-VM* commands accept a parameter -ResourcePoolName to do that. Example:
Set-VMMemory -VMName APP-02 -ResourcePoolName MyPool1
Start measuring with Enable-VMResourceMetering.
Query collected data as often as you need with Measure-VMResourcePool.
Note that you should specify the pool resource type in the command to get reliable data (see my post above, Jan 7th).
When a metering period (such as a week or a month) has passed, reset the counter to zero with
Reset-VMResourceMetering.
Hope that helps. I consider this the answer to my own question. ;)
Here's some links I collected:
http://itproctology.blogspot.ca/2012/12/hyper-v-resource-pool-introduction.html
http://www.ms4u.info/2012/12/configure-ethernet-resource-pool-in.html
http://blogs.technet.com/b/virtualization/archive/2012/08/16/introduction-to-resource-metering.aspx
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/1ce4e2b2-8fdd-4f16-8ab6-e1e1da6d07e3
Best wishes, Nils
Nils Kaczenski
MVP Directory Services
Hannover, Germany

RPT_MOPZ_COPY_STACK_XML shows SC version differs for JAVA and DUAL-Stack xml files

Hi All,
I am using the report/program RPT_MOPZ_COPY_STACK_XML to copy the stack xml file I used from a previous upgraded system. Systems are identical. However, report shows below..
"Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
and
Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
However, this is not the case when checked, it's strange that this particular component has the same version between the two systems, but the report says they differs in version.
Please help check how to resolve the issue.
SAP notes mentioned in below KBA were already obsolete. Solution Manager system just upgraded to 7.1 SP11.
1711612 - RPT_MOPZ_COPY_STACK_XML Report Troubleshooting.
We would appreciate your response for us to resolve this issue. Thanks.
Regards,
Philip

Hi Jansi, Divyanshu,
Both system have the same patch levels.
Here the situation, SYS1 is where we generated the stack xml file. Afterwards, used that stack file to upgrade SYS1.
Now we built SYS2, ensuring it has the same components version with the un-upgraded version of SYS1, so yes they have same patch number for same components, for this issue, kernel and jvm.
Thus, instead of running MOPZ for SYS2, we used RPT_MOPZ_COPY_STACK_XML to convert the stack file of SYS1 to be used for SYS2.
This is where we encountered below messages, when performing the copy.
"Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
and
Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
We previously used SOLMAN 7.0 SP23, and the report is working fine there. Then recently, solman was upgraded to 7.1 SP11, and now the report is not working with the above issue.
We would appreciate if you could share actions on how we can fix the issue.
Regards,
Philip

Upgraded to 8.2.1 now I have a version mismatch for the PDA module ver. 8.2

I just recieved a new laptop. I installed LV 8.2.1, then PDA module 8.2. Programs will not build. I get a "Mismatched Versions of Labview and the PDA module" error. Help.

Hello,
I was able to reproduce this version mismatch error on a test PC with LabVIEW 8.2.1 and PDA 8.2. This is expected behavior. Also, Matt called in on the phone, and I directed him to his internal sales representative to be shipped 8.2.1 of the PDA module.
I suspect the reason why I was not encountering this on my own PC was that I had already upgraded my LabVIEW Touch Panel Module to 8.2.1 but not PDA yet.
For all people reading this, the ultimate answer is that the PDA version number should match the LabVIEW version number.
Best regards,
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

Table for Demands and Supplies after CTM run

Hi Gurus,
I want to get number of demands and supplies after CTM run .
I can see these details from opt11 . But i want to use these data points further for a custom developments .
So please let me know , in which table these entries sit ? There has to be a standard table for the same .
Regards
Bhupendra

Vikas,
You can also improve changing the data points in CTM global setting /SAPAPO/CTMCUST...
Enable check box : Asynchronous Update and Define appropriate Packet Size and also update
Package Size for Creating Orders
Package Size for Creating Pegging Rels
Package Size for Order Selection
Below example illustrates the improved performance by enabling check box : Asynchronous Update and Define appropriate Packet Size
If you set the indicator, CTM first plans the number of demands
specified in the Package size field. Then the system creates the
corresponding orders in the liveCache. At the same time, CTM continues
with the planning for the remaining demands.
If you do not set the indicator, the system first plans all demands and
then creates the orders in the liveCache.
Example
You want to use the asynchronous liveCache update for 20000 demands.
Enter 1000 as the package size. The system attempts to fulfill the first
1000 demands. The orders for these demands are created in the liveCache,
whilst CTM planning continues for the remaining 19000 demands."
We had similar issue and CTM performance improved significantly after updating the above setting.
Thukral

Users prompted for username and password after sharing removed from servers

Hello Community
    On Sharepoint 2010 Server using the UI in a 2 server farm with an intranet running on it and everything functions as it should. However it was noticed that from a users computer when in "Windows Explorer" if "Network"
is clicked the 2 servers are visible.
    The problem is that when the server are clicked on in Windows Explorer the files and folders on the hard drive of the servers are visible too.
    Subsequently I logged onto the server and when into "Properties' - "Sharing" and
unchecked the checkbox to "Share this folder".
    That solved the problem of the users being able to see and access the files
and folders on servers hard drives but now when the users log onto the intranet
they are prompted for a user name and password and even when they provide the user
name and password and the page is returned the prompt appears on the screen again(then they cancel out).
    What can be done about the user being prompted for username and password without sharing the drives on the servers ?
    Thank you
    Shabeaut

What exactly was shared out from the SharePoint server's file system? There are certain things that are shared by default.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Version Mismatch for Kernel and CPU after 10.6.4 update

Similar Messages

Maybe you are looking for