Versioning for excel docs uploaded to workspace
I need info on how to apply versioning for Excel documents uploaded to Oracle Beehive Workspace.
I actually want to enable versioning for excel documents, which enable me to track the changes made to the documents and revert to previous versions if required.
Any help is appreciated.
Thanks,
Smita
Hi Jereen,
Thanks For the information. But I did not understand if the versioning is getting applied to Excel documents uploaded to workspace.
My requirement is like.
I have a folder in my workspace. I upload an Excel document into the folder. Later When I modify the file and upload it back, I should be able to see what are the changes from previous file and if required I need to revert back to old version. Main thing required is I should be able to view the updates done.. just like the feature available for wiki pages, where I can compare the current version with the previous version and understand what was updated.
Please help me out on how to have such a feature enabled for Documents uploaded to workspace.
Thanks,
Smita
Similar Messages
-
Where can i download Essbase addin 9.3.1 version for Excel-2003???
H,
Where can i download Essbase addin 9.3.1 version for Excel-2003???
Please adviseThanks for your reply...i had the client software also...
In general what procedure do we follow while installing the Essbase into PC?
I have installed Client software 1st and searched for MS office 2003 and installed...
when i go to Tools->addins->hypeionanalyticservices->bin->there is no addin ...
please suggest me...is that right way to install the client software before installing the MSoffice??
or else
do i need to follow the below steps??
In Excel 2003
* Go to File -> Open….
* Navigate to <drive>:\Hyperion\AnalyticServices\client\sample.
* Open Esstoolb.xls file.
* Now the Essbase toolbar is shown.
Regards,
Prabhas.. -
How to increase page size for balance file upload in Workspace.
Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.
-
Creating a cfhttp multi part form post for google docs upload
Hey all,
If you saw my last thread, you know I am working with google docs and uploading documents to it. Well I got basic document uploading working, but now I am trying to include meta data. Google requires you to include the metadata with the actual file data and seperate them by using a multi part form upload. I don't know exactly the process for doing so, but they have a handy code snippet of the desired results at
http://code.google.com/apis/documents/docs/3.0/developers_guide_protocol.html#UploadingDoc s
So I am basically trying to mimic that payload, however I am continually getting an error stating that there are no parts in a multi part form upload.
<errors xmlns='http://schemas.google.com/g/2005'><error><domain>GData</domain><code>InvalidEntryException</code><internalReason>No parts detected in multipart message</internalReason></error></errors>
to be exact. I am not really sure what I am doing wrong here. I figure it is one of two things, either I am not including the actual data in the payload properly (I am currently using a body type param for the payload, but I have also tried a formfield named content to deliver it. Neither worked). So maybe I need to do something else tricky there? The other thing which I am not reallly sure about is the content-length attribute. I don't know exactly how to calculate that, and I read in another forum that a content length attribute was messing that guy up. Right now I am just taking the lenght of the payload string and multiplying by 8 (to get the number of bytes for the entire payload) but hell if I know if that is right. It could be I just don't know how to set up the parts for the message, it seems pretty straight forward though. Just define a boundary in the content-type, then put two dashes before it wherever you define a new part, and two dashes trailing the last part.
Anyway, here is my code, any help is much appreciate. I'm a bit beyond my expertise here (not really used to trying to have to roll my own http requests, nevermind multipart post form data) so I'm kinda flailing around. Thanks again.
<cffunction name="upload" access="public" returnType="any" hint="I upload the document." output="false">
<cfargument name="filePath" type="string" required="false" hint="file to upload.">
<cfargument name="docType" type="string" required="yes" hint="The document type to identify this document see google list api supported documents">
<cfargument name="parentCollectionId" type="string" required="no" hint="the name of the collection/collection to create (include collection%3A)">
<cfargument name="metaData" type="struct" required="no" hint="structure containing meta data. Keyname is attribute name, value is the value">
<cfset var result = structnew()>
<cfset result.success = true>
<cftry>
<cfif structkeyexists(arguments,"parentCollectionId")>
<cfset arguments.parentCollectionId = urlencodedformat(parentCollectionId)>
<cfset result.theUrl = "https://docs.google.com/feeds/default/private/full/#arguments.parentCollectionId#/contents">
<cfelse>
<cfset result.theUrl = "https://docs.google.com/feeds/default/private/full/">
</cfif>
<cfoutput>
<cffile action="read" file="#arguments.filePath#" variable="theFile">
<cfsavecontent variable="atomXML">
Content-Type: application/atom+xml
<?xml version='1.0' encoding='UTF-8'?>
<entry xmlns="http://www.w3.org/2005/Atom" xmlns:docs="http://schemas.google.com/docs/2007">
<category scheme="http://schemas.google.com/g/2005##kind"
term="http://schemas.google.com/docs/2007###arguments.docType#"/>
<cfloop collection="#arguments.metaData#" item="key">
<#key#>#arguments.metadata[key]#</#key#>
</cfloop>
</entry>
--END_OF_PART
Content-Type: text/plain
#theFile#
--END_OF_PART--
</cfsavecontent>
</cfoutput>
<cfset result.postData = atomXML>
<cfhttp url="#result.theUrl#" method="post" result="httpRequest" charset="utf-8" multipart="yes">
<cfhttpparam type="header" name="Authorization" value="GoogleLogin auth=#getAuth()#">
<cfhttpparam type="header" name="GData-Version" value="3">
<cfhttpparam type="header" name="Content-Length" value="#len(trim(atomXML))*8#">
<cfhttpparam type="header" name="Content-Type" value="multipart/related; boundary=END_OF_PART">
<cfhttpparam type="header" name="Slug" value="test file --END_OF_PART">
<cfhttpparam type="body" name="content" value="#trim(atomXML)#">
</cfhttp>
<cftry>
<cfset packet = xmlParse(httpRequest.fileContent)>
<cfif httpRequest.statusCode neq "201 created">
<cfthrow message="HTTP Error" detail="#httpRequest.fileContent#" type="HTTP CODE #httpRequest.statusCode#">
</cfif>
<cfset result.data.resourceId = packet.entry['gd:resourceId'].xmlText>
<cfset result.data.feedLink = packet.entry['gd:feedLink'].xmlText>
<cfset result.data.title = packet.entry.title.xmlText>
<cfset result.data.link = packet.entry.title.xmlText>
<cfcatch>
<cfset result.data = httpRequest>
</cfcatch>
</cftry>
<cfcatch type="any">
<cfset result.error = cfcatch>
<cfset result.success = false>
</cfcatch>
</cftry>
<cfreturn result>
</cffunction>
Also, this is what my atomXML data ended up looking like when it got sent to google. This isn't the WHOLE request (it doesn't include the headers, just the body).
Content-Type: application/atom+xml
<?xml version='1.0' encoding='UTF-8'?>
<entry xmlns="http://www.w3.org/2005/Atom" xmlns:docs="http://schemas.google.com/docs/2007">
<category scheme="http://schemas.google.com/g/2005#kind" term="http://schemas.google.com/docs/2007#document"/>
<TITLE>Woot Test</TITLE> </entry>
--END_OF_PART
Content-Type: text/plain
I'm a test document lol!
--END_OF_PART--Woot, I got it. I had to send the gData version number, and change the URL.
Here is the working function.
<cffunction name="upload" access="public" returnType="any" hint="I upload the document." output="false">
<cfargument name="myFile" type="string" required="false" hint="file to upload.">
<cfset var result = "">
<cfset theUrl = "https://docs.google.com/feeds/default/private/full">
<cffile action="read" file="C:\website\xerointeractive\testing\test.txt" variable="theFile">
<cfset fileSize = createObject("java","java.io.File").init("C:\website\xerointeractive\testing\test.txt").length()>
<cfhttp url="#theURL#" method="post" result="result" charset="utf-8" >
<cfhttpparam type="header" name="Authorization" value="GoogleLogin auth=#getAuth()#">
<cfhttpparam type="header" name="Content-Type" value="text/plain">
<cfhttpparam type="header" name="Slug" value="test file">
<cfhttpparam type="header" name="GData-Version" value="3">
<cfhttpparam type="header" name="Content-Length" value="#fileSize#">
<cfhttpparam type="body" value="#theFile#">
</cfhttp>
<cfreturn result>
</cffunction> -
Function module for Excel file upload
Hi,
I am new to APO technical. My requirement is upload excel file data. However commonly used FM in R/3 for uploading excel files from presentation server are not avaliable ( KCD_EXCEL_OLE_TO_INT_CONVERT , ALSM_EXCEL_TO_INTERNAL_TABLE , TEXT_CONVERT_XLS_TO_SAP etc) in APO system(SCM 4.0 version).
Let me know if there are any other FM avaliable and procedure to upload the excel files in APO?
Please let me know if you require any further details.
Regards
ReddyHi
The data structures in APO differ from R/3 (e.g. data is held in livecache tables) and hence the FM's you mention will not work in APO.
Try looking at the Wiki pages as there is a lot of useful information there for you, e.g. this example code to download and upload data between Excel and APO:
Link: [Download SCM data into Excel|http://wiki.sdn.sap.com/wiki/display/SCM/DownloadPlanningdataintoexcel]
Have a look around the Wiki, hopefully it will help you out
Regards
Ian -
Custom TCode for Excel File Upload/Import - WebGUI Error
We get an ABAP runtime error when uploading an excel file with a custom tcode using WebGUI. It works ok with WinGUI. Any ideas what could be causing that error?
Runtime Errors RAISE_EXCEPTION
Date and Time 01/05/2011 17:27:16
Short text
Exception condition "JAVABEANNOTSUPPORTED" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "C_OI_CONTAINER_CONTROL_CREATORCP" raised the
exception
condition "JAVABEANNOTSUPPORTED".
Since the exception was not intercepted by a superior
program, processing was terminated.You can use the below code. One more thing while running make sure there is no unsaved excel sheet open in your system.
FORM sub_create_container .
Create Instance control for container
CALL METHOD c_oi_container_control_creator=>get_container_control
IMPORTING
control = iref_control
error = iref_error.
IF iref_error->has_failed = c_check.
CALL METHOD iref_error->raise_message
EXPORTING
type = 'E'.
ENDIF.
Create generic container linked to container in screen 100
CREATE OBJECT oref_container
EXPORTING
container_name = 'CONT'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Error while creating container'(012).
ENDIF.
Establish connection to GUI Control
CALL METHOD iref_control->init_control
EXPORTING
inplace_enabled = c_check
r3_application_name = 'EXCEL CONTAINER'
parent = oref_container
IMPORTING
error = iref_error
EXCEPTIONS
javabeannotsupported = 1
OTHERS = 2.
IF iref_error->has_failed = c_check.
CALL METHOD iref_error->raise_message
EXPORTING
type = 'E'.
ENDIF.
Create Document Proxy
CALL METHOD iref_control->get_document_proxy
EXPORTING
document_type = soi_doctype_excel_sheet
IMPORTING
document_proxy = iref_document
error = iref_error.
IF iref_error->has_failed = c_check.
CALL METHOD iref_error->raise_message
EXPORTING
type = 'E'.
ENDIF.
ENDFORM. " SUB_CREATE_CONTAINER
FORM sub_create_document USING p_sheet TYPE i.
DATA: l_title TYPE char40,
l_char TYPE char2,
l_time TYPE i,
l_sheet TYPE char12.
Calculate the number of sheets to be created
l_time = p_sheet - 1.
CONCATENATE 'Assembly Table'(015) v_char INTO l_title
SEPARATED BY space.
Create document
CALL METHOD iref_document->create_document " Open use Open_document method
EXPORTING
open_inplace = c_check
document_title = l_title
no_flush = c_check
IMPORTING
error = iref_error.
Open Spreadsheet interface
CALL METHOD iref_document->get_spreadsheet_interface
EXPORTING
no_flush = c_check
IMPORTING
sheet_interface = iref_spreadsheet
error = iref_error.
Get number of sheets
CALL METHOD iref_spreadsheet->get_sheets
EXPORTING
no_flush = c_check
IMPORTING
sheets = i_sheets
error = iref_error.
Reaname he sheet
READ TABLE i_sheets INTO wa_sheets INDEX 1.
l_char = p_sheet.
CONCATENATE 'Sheet' l_char INTO l_sheet.
CALL METHOD iref_spreadsheet->set_sheet_name
EXPORTING
newname = l_sheet
oldname = wa_sheets-sheet_name
no_flush = c_check
IMPORTING
error = iref_error.
REFRESH i_sheets.
CLEAR: l_char,
l_sheet.
Add sheets
DO l_time TIMES.
l_char = sy-index.
l_char = p_sheet - l_char.
CONCATENATE 'Sheet' l_char INTO l_sheet.
CALL METHOD iref_spreadsheet->add_sheet
EXPORTING
name = l_sheet
no_flush = c_check
IMPORTING
error = iref_error.
ENDDO.
Get number of sheets
CALL METHOD iref_spreadsheet->get_sheets
EXPORTING
no_flush = c_check
IMPORTING
sheets = i_sheets
error = iref_error.
SORT i_sheets BY sheet_name DESCENDING.
ENDFORM. " SUB_CREATE_DOCUMENT
FORM sub_save_document .
DATA: l_changed TYPE int4.
Save the document
CALL METHOD iref_document->save_as
EXPORTING
file_name = p_file
no_flush = c_check
IMPORTING
error = iref_error.
Close the document
CALL METHOD iref_document->close_document
EXPORTING
do_save = c_check
no_flush = ''
IMPORTING
has_changed = l_changed
error = iref_error.
ENDFORM. " SUB_SAVE_DOCUMENT
Thanks
Subhankar -
LSMW Errors for Excel file upload
Hi all,
We've loaded an Excel file with 20,000+ records into SAP using LSMW and a background run. However, the LSMW returned errors for about 2,000 of those records and seems to have processed the other 18,000. Questions as follows:
1. Is there a way to extract the 2000 records into another Excel file?
2. If so, how can I isolate the 2000 records so that I can reload them with correct information? I do not want to have to go through each record one by one to find them.
3. How can I identify what the problem was for a record that produced an error?
Thanks in advance. Points will be awarded for helpful answers.u have used LSMW which will normally create a Session which will be executed using SM35 in background mode...Goto the session and click on errors...the errors are been shown up..U can correct there itself or else prepare another one with correct data and do a lsmw once again.
-
How do we scan for viruses of uploaded excel file in Web Dynpro for JAVA
Hi All,
Please let me know "How do we scan for viruses of uploaded excel file in Web Dynpro for JAVA"
Regards,
Ganga.Hi ,
pl go through this note "Integrating a virus scan into SAP applications 817623 "
SAP Virus Scan Interface
http://help.sap.com/saphelp_nw2004s/helpdata/en/30/42c13a38b44d5e8d1b140794e8e850/frameset.htm
Sample Application
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6e1c4221-0901-0010-63ba-b1f9459d6e74
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2681486-0a01-0010-8497-c778eac80da5
Regards
Ayyappparaj -
I downloaded lion but now I cannot access my word and excel docs for work. What can be done easily to open all my files?
tamanacoazur wrote:
Have not a clue if this a LION problem or Microsoft problem. My gut says Microsoft as they acknowledge the problem in their support section. Their solution: Open files with previous version of Word. That is completely unacceptable as a solution in my opinion. Why would have I ever bothered to upgrade to 2011 if I had known I need to keep a version of 2008 running on my computer.
Honestly I don't know if it's a Lion or MS problem eihter. I have been using Lion for many months with Office 2011 with no problems though.The earliest version I had on my machine was 2008 and 2011 opened those files with no problems at all. As Dave mentioned earlier he opens Office 2004 files all the time with 2011.
One thing you might want to do is restart the computer while holding down the Option key then select the Restore Volume and run Disk Utility and repair the Disk Permissions on the HD. Run DP at least 2x. -
Hello - I attempted to download a "critical" update for Excel, however, it failed. I shut down the computer. Now I am not able to access docs in excel either ones I have already created or create new ones. I continue to get an error message. Please help!!!!! thanks!!
I suspect you may want to try Microsoft's Mac Office support forums, since this appears to be an issue with their software.
What error message (if any) do you get if you try and start up Excel?
However, if it happened to me I'd probably remove Office and then resintall it from the original disks. That will take you back to the original shipping version of Office after which it should update you to the latest version.
Most likely when Microsoft's update software failed it managed to corrupt the Excel program files in such a way that they are no longer usable. So a resintallation of the program is likely the only real option to fix this one. -
Hi all,
I am trying to Package and deploy Powerpivot Add-in for Excel 2010. I have the Powerpivot_X86_(11.1.329.0) .MSI which installs Unattended, but Uninstallation will not remove entry from COM ADD-IN list in Excel and at first re-launch (even after
Power Pivot Uninstallation) it will try to load Powerpivot add-in and will give an error.
Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/110/Microsoft.AnalysisServices.XLHost.Addin.VSTO did not succeed.
this above path is the [InstallDir] which gets wiped off with the unistallation of the .MSI. So, before uninstallation,I stop the excel process and am running a script to delete HKCU Add-in Reg key entries.
and also, I thought it may be implicitly loading the add-in from folder such as,
C:\Program Files\Microsoft Office\Office14\XLstart
%appdata%\Microsoft\Excel\XLSTART
but nothing is installed there.
Second Issue
when I re-install,
it doesn't automatically show up in the Excel ribbon (even after reboot and even if regeistries are created at the same location) but instead we should add it through COM ADD-IN list in Excel Manually.
Appreciate any idea's and suggestion's.
P.S
is it possible to make it completely installed per system rather having user entries?
Error Details:
Name:
From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/110/Microsoft.AnalysisServices.XLHost.Addin.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/110/Microsoft.AnalysisServices.XLHost.Addin.vsto did
not succeed. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\110\Microsoft.AnalysisServices.XLHost.Addin.vsto'. ---> System.Net.WebException: Could not find a part of
the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\110\Microsoft.AnalysisServices.XLHost.Addin.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS
Excel Client\110\Microsoft.AnalysisServices.XLHost.Addin.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES
secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()Guys, I think I solved the
issue:
Symptoms
1. Power Pivot SQL 2012 32-bit installed over the old version without
deinstalling it
2. Installed with a user with administrator rights
3. It worked under the profile with admin rights, it didn't work under the
normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
did not succeed.
4. In the admin profile, it went to the path "110": C:/Program
Files (x86)/Microsoft Analysis Services/AS Excel
Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
5. In the normal profile, it went to the - wrong - "10" path:
C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
SOLUTION
1. ADMIN: Installed VSTO 4.0
2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
if not, install it!
3. NORMAL USER: Create a .reg file (Backup your registry before!) and
use it UNDER THE NORMAL USER!!!
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
"Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
"FriendlyName"="PowerPivot for Excel"
"LoadBehavior"=dword:00000003
"Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
"CartridgePath"="C:\\Program Files\\Microsoft Analysis
Services\\AS OLEDB\\110\\Cartridges\\"
4. NORMAL USER: Rename the registry key
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
into
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
5. NORMAL USER: Start up Power Pivot and it should
work now!
Analysis
IMHO the issue lies in the fact, that the Power Pivot
installer creates two problems:
The first issue is that the path to the add-in under
the NORMAL user is simply wrong and points to a wrong location (the
"10" in the path). In the admin profile, where it was originally
installed, it points to the "110" path which is correct.
The second issue is that the installation procedure
somehow needs to create a registry key (the one under point 4 in the solution)
to complete it self and if this key already exists it fails to install and
throws up weird error messages. If you delete or rename this key, it is created
again (exactly in the same way) but then everything works out.
Hope this
helps!
Regards, Reto -
Excel File Upload In Webdynpro For ABAP
Hi All,
I have a doubt regarding EXCEL file upload for Webdynpro for ABAP.
I am able to get the path of file using 'FILEUPLOAD' UI element.Now I need to upload the EXCEL file into ALV.I have tried out with GUI_UPLOAD and other excel upload function module.But these Function Module throws Dump.
Can you please suggest how to go about it.It will be a great help if u can suggest any function module or method.Hi Amita,
Insetad of using GUI_UPLOAD use 'HR_KR_XSTRING_TO_STRING'
Here is the sample code,
TYPES :BEGIN OF str_itab,
name(10) TYPE c,
age(10) TYPE c,
END OF str_itab.
DATA : t_table1 TYPE STANDARD TABLE OF str_itab,
i_data TYPE STANDARD TABLE OF string,
lo_nd_sflight TYPE REF TO if_wd_context_node,
lo_el_sflight TYPE REF TO if_wd_context_element,
l_string TYPE string,
fs_table TYPE str_itab,
l_xstring TYPE xstring,
fields TYPE string_table,
lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
data_table TYPE if_main=>elements_data_tab.
* get single attribute
wd_context->get_attribute(EXPORTING name = `DATASOURCE`
IMPORTING value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
SPLIT l_string AT
cl_abap_char_utilities=>newline INTO TABLE i_data.
* Bind With table Element.
LOOP AT i_data INTO l_string.
SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE
fields.
READ TABLE fields INTO lv_field INDEX 1.
fs_table-name = lv_field.
READ TABLE fields INTO lv_field INDEX 2.
fs_table-age = lv_field.
APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_sflight = wd_context->get_child_node( 'DATA_TAB' ).
lo_nd_sflight->bind_table( t_table1 ).
ENDMETHOD.
if correct give correct answer
Thanks & Regards,
Meenachi.R -
Can SAP ignore blank lines in Excel when uploading the planning for PCA?
Hi,
We have launch planning on PCA in SAP. We are uploading the planning figures from an Excel-sheet via the standard function in SAP. The problem is that sometimes we get blank lines in the Excel-doc. When we upload with blank lines we receive an error. Can I somehow get SAP to ignore blank lines?
Best regards
Carl-JohanWell you can delete the empty lines in excel using the sort functionality and try it.
Hope it helps..
Thanks,
Nandita -
Excel version for download to Excel
Hi All,
Does anybody know how the Excel version for the download is deternined? I have Excel 2007 installed on my laptop, but the download happens in Excel 97-2003.
Thanks,
NathalieHi Nathalie,
Please check the question discussed in the forum:
Bw export to excel option downloads the report as .XLS
-Vikram -
I've exported a pdf document created in 2009 at least 20 times for a doc or docx version. Gibberish.
I've exported a pdf document created in 2009 at least 20 times for a doc or docx version. Gibberish.
Hi,
Please open your PDF file in Adobe Reader then check the producer from File menu>Properties then let me know.I have seen the same issue with PDF file created by some producers.
Or you can send me your PDF file so that I can look at it.
Please use below site to share your file.
https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg#
Thank you.
Hisami
Maybe you are looking for
-
How transfer photos to Samsong Galaxy Tablet?
I am running Photoshop Elements 11 on my PC using Windows 7. How do I transfer photos in Albums or with Tags to my Samsong Galaxy 10.1 Tablet? Thanks.
-
Is the MASTER_IDOC_DISTRIBUTE FM called even without a Custo Distri. Model.
Hi all In have a question dealing with ALE. I am trying to send a BOM Change and create IDoc to a XI system. My question is : Is the MASTER_IDOC_DISTRIBUTE FM called even without a Customer Distribution Model? Or to test my scenario do I HAVE to crea
-
Hiding private contact and other private information
I have used a Palm PDA for years and depend on its ability to hide private contacts and private information while having those not marked private visible. (To view the private information one must enter a password.) I am trying to migrate from using
-
I Transfered everything to new IPhone but can't get the PDF's in IBooks to copy over.
-
10.7 install to external drive results in only "user" account
There is a problem which I have had couple of times when installing OS X Lion onto an external drive while running 10.7 off of the internal drive. The problem is that the OS install on the external drive gets created with only one user account, the s