Vertical Columns Headers in WDA...
Hello guys,
I need a help. I've created Webdynpro ABAP application where I display a table with a lot of columns. Header cells of the columns should contain vertical text because horizontal header texts will make the columns too wide. Unfortunatelly I didn't find any possibility how to do it. Does Webdynpro ABAP technology support vertical header column's text? If yes, how can I use it. If not, do you know whether SAP prepares this support in future?
Thanks in advance for every advice!
Regards
Bertuccio
Hi,
Interesting requirement. As per my knowledge this is not possible in WD in version SAP NW 7.0, EhP4. Not sure in next enhancement packs.
May be Thomas can share more information on this.
Thanks,
Chandra
Similar Messages
-
How to group the column headers using WDA ALV ?
Hello All.
How can I group the column headers as shown in the picture(chart), using WDA ALV.
Thanks for any help !
A
B
A1
A2
A3
A4
B1
B2
B3
B4
B11
B12
B13
B21
B22
B23
B31
B32
B33
B41
B42
B43
消息编辑者为:Cloud LiHi ,
This functionality was not exposed/supported in WDP ALV,however the same can be achieved in normal table(table UI element)
The reason this isn't exposed directly in the ALV is because it is used internally when you do a grouped sort. The ALV automatically buids group headers to explain the grouped sort/sum.
Depending upon your requirements if you must have the group header and aren't using much else in the ALV, you might be better off using the plain old table. Below is a link to how to do group headers in the table UI element.
Table
Hope this helps you.
Thanks
KH -
Column headers be vertical in firefox and IE and fit the size as per text
I want to make my columns vertical as shown in the below link
https://apex.oracle.com/pls/apex/f?p=39006:1
I am making two regions in a page, and based on the first region data, I submit and get the next displayed region, I am not showing that in the below link though but this is exactly what I want
http://apex.oracle.com/pls/apex/f?p=15324:1
My second region has vertical columns but my report cannot be scrolled to right because of the first region. Also I want the columns to have fitting size of the text in them
First region is of HTML type
Second region is of PL/SQL type
Could you please check my page and give an idea how to do the same?
Details
Full APEX version: Application Express 4.0.2.00.07
Database Version
CORE 11.1.0.7.0 Production
NLSRTL Version 11.1.0.7.0 - Production
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
TNS for Linux: Version 11.1.0.7.0 - Production
Edited by: user13735136 on Jul 1, 2012 1:56 AMThe second link you provided is useless.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
Hiding the column headers in boxed view
I've created a custom list that I'm displaying in boxed view. Here's a sample of the columns:
Business Systems Manager
Project lead
Project number
SFA?
Etc...
In boxed view, it displays like I have it here - vertical. The names of the people and info display next to each item.
However, the web part is still displaying the column headings across the page like in this example:
Business Systems Manager - Project Lead - Project Number - SFA? - etc...
Some of my custom lists carry on for 12 or 13 columns and the main page view has about 6 or 7 of them so needless to say, the extra real estate the column headers (which are completely redundant because the column heading info is IN the boxed view!!!) are taking up is killing the layout of the page.
Is there anyway to remove the column headers from the boxed view with out of the box Sharepoint? Or is Designer required?
Thanks!
LorraineThis worked well for me:
1) Add a Content Editor Web Part
2) Click Source Editor
3) Enter the following code:
[css] <style> .ms-viewheadertr { display: none;} </style> [/css]
4) Select Save
5) Go to Layout and Select 'Hidden' -
Can we fix the column headers of a table placed in a scroll container?
Hi
I have a big table placed inside a scroll container.
The table is so big that both horizontal and vertical scroll bars appears always.
So what happens is...
when the user moves the vertical scrollbar down, the column headers move
up,so that they are no visible, when he reaches the bottom of the table.
What is our requirement is, even if the user moves the vertical scrollbars the headers should be visible.
Can anybody solve this problem??
Thanks
Smithahi Smitha,
We cannot avoid that. but an alternate is that use another table above this table and which has the number of rows as zero. hide the table header for the below table. you need to adjust the header of above table so that it fits for the below table.
This works fine if the table doesn't have sorter facility.
Regards,
Gopi -
How to fix column headers in Portal
Hi Guru's,
do you know is there a way to fix the report headlines like in Excel.
E.g. I have a report with about 2000 rows and when the user scrolls down the headlines are out of the screen and he doesn't know what is in which column.
So, we know about the possibility to restrict the rows per page to 20 rows or whatever, but then the jumping from side to side takes too much time.
So, is there a possibility to "fix the cells" like in Excel, so the User scrolls down and always sees the column headers?
Thanks in advance!
SandraIn 7.0 Analyzer, open the workbook and go into Designer Mode. Double-click on the analysis grid to bring up the properties screen. Under the range field, replace the 2nd row number to the row where you want to limit the table. Then go to the tab called Clipping, select "Scroll and Keep Lead" under Vertical.
Dunno about 3.5.
Edited by: Andrew Zhou on Jul 17, 2008 9:25 AM
Oops you wanted to do this on web, not the other way around. In WAD 7.0, open the web template (if you're using standard template, it's 0ANALYSIS_PATTERN). Select the analysis grid and go into it's properties, change the "Number of Data Rows Displayed at Once" to your liking. -
Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishalHi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Unable to turn column headers bold in Word table using VB Script
I have created a table in Microsoft Word 2010 using VB Script (this is via the script engine that forms part of HP Quality Centre functionality). The table itself is OK, 2 columns with centred headers. However, I am unable to make the column
headers bold. I have spent hours searching the net and trying various options to no avail can somebody please help me.
Set objWord = CreateObject("Word.Application")
Set objDocument = objword.Documents.Open(Src_Dir & template_file
Const wdAlignParagraphCenter = 1'var to control justification of the table columns
Const NUMBER_OF_ROWS = 1 'number of rows in intial table
Const NUMBER_OF_COLUMNS = 2 'number of colums in the intitial table
'search for the "TAA_TABLE" bookmark embedded in the document template, this is where the table will be created
Set objRange=objDocument.Bookmarks("TAA_TABLE").Range
'create the table
objDocument.Tables.Add objRange, NUMBER_OF_ROWS, NUMBER_OF_COLUMNS
Set objTable = objDocument.Tables(2)
'populate column headers
objTable.Cell(1, 1).Range.Font.Bold = True
objTable.Cell(1, 1).Range.Text = "Sub Contractor"
objTable.Cell(1, 2).Range.text = "TAA Number"
'centre the column headers
objDocument.Tables(2).Rows(1).Select
Set objSelection = objWord.Selection
objSelection.ParagraphFormat.Alignment = wdAlignParagraphCenter
'format the table with plain grid lines
objTable.AutoFormat(16)
'set the column widths
objTable.Columns(1).Setwidth 230,0
objTable.Columns(2).Setwidth 230,0
Any help is graetfully appreciated, as this is driving me wild.
Cheers,Hi Citronax,
I haved noticed that you used objTable.AutoFormat to format the table. Based on my understanding, this fuction will applie a predefined look to a table.
After I move the code which bolder the text behind this line of code, it works well for me.
'format the table with plain grid lines
objTable.AutoFormat (16)
objTable.Cell(1, 1).Range.Font.Bold = True
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Change column headers in ALV report
Hi experts,
I have created a new simple ALV report (it uses only internal tables, no structures). I would like to change the names of column headers in the ALV report. Is this possible? How can I do it?
Thanks in advanced.Thanks for your reply,
I am trying to use the code mentioned in the link but I think that something
is missing, probably a CASE statement before WHEN in the LOOP.
Can you help me? What do I have to put before WHEN statement?
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = <program name>
i_structure_name = <DDIC structure>
i_bypassing_buffer = 'X'
CHANGING
ct_fieldcat = gi_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3. "#EC *
LOOP AT gi_fieldcat INTO wa_fieldcat.
WHEN 'XXXX'.
wa_fieldcat-seltext_s = 'Fac'.
wa_fieldcat-seltext_m = 'Factory'.
wa_fieldcat-seltext_l = 'Factory'.
wa_fieldcat-reptext_ddic = 'Factory'.
MODIFY gi_fieldcat FROM wa_fieldcat.
ENDLOOP. -
How to export data with column headers in sql server 2008 with bcp command?
Hi all,
I want know "how to export data with column headers in sql server 2008 with bcp command", I know how to import data with import and export wizard. when i
am trying to import data with bcp command data has been copied but column names are not came.
I am using the below query:-
EXEC master..xp_cmdshell
'BCP "SELECT * FROM [tempdb].[dbo].[VBAS_ErrorLog] " QUERYOUT "D:\Temp\SQLServer.log" -c -t , -T -S SERVER-A'
Thanks,
SAAD.Hi All,
I have done as per your suggestion but here i have face the below problem, in print statment it give correct query, in EXEC ( EXEC master..xp_cmdshell @BCPCMD) it was displayed error message like below
DECLARE @BCPCMD
nvarchar(4000)
DECLARE @BCPCMD1
nvarchar(4000)
DECLARE @BCPCMD2
nvarchar(4000)
DECLARE @SQLEXPRESS
varchar(50)
DECLARE @filepath
nvarchar(150),@SQLServer
varchar(50)
SET @filepath
= N'"D:\Temp\LDH_SQLErrorlog_'+CAST(YEAR(GETDATE())
as varchar(4))
+RIGHT('00'+CAST(MONTH(GETDATE())
as varchar(2)),2)
+RIGHT('00'+CAST(DAY(GETDATE())
as varchar(2)),2)+'.log" '
Set @SQLServer
=(SELECT
@@SERVERNAME)
SELECT @BCPCMD1
= '''BCP "SELECT
* FROM [tempdb].[dbo].[wErrorLog] " QUERYOUT '
SELECT @BCPCMD2
= '-c -t , -T -S '
+ @SQLServer +
SET @BCPCMD
= @BCPCMD1+ @filepath
+ @BCPCMD2
Print @BCPCMD
-- Print out below
'BCP "SELECT
* FROM [tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername'
EXEC
master..xp_cmdshell
@BCPCMD
''BCP' is not recognized as an internal or external command,
operable program or batch file.
NULL
if i copy the print ourt put like below and excecute the CMD it was working fine, could you please suggest me what is the problem in above query.
EXEC
master..xp_cmdshell
'BCP "SELECT * FROM
[tempdb].[dbo].[wErrorLog] " QUERYOUT "D:\Temp\LDH_SQLErrorlog_20130313.log" -c -t , -T -S servername '
Thanks, SAAD. -
Hints on Interactive Report's column headers
Hi,
I've used +"< spa.n title = "Hint" > Header < / span>"+ (the first 'spa.n' is so it doesn't interpret as code) to put hints on my report columns headers but found that, when using interactive report's tools, the column names that appear obviously include the "code".
Is there any way to put hints on interactive report columns and still maintain the proper title(in this case Header) when using the tools?
Thank you,
MarcHi,
Thank you for the tip Ghoulies. The spaces I put trying to make it read as text. The code works fine, it actually shows the Header in the report's column and the hint appears on mouse-over.
What I mean is, when using interactive report's tools, such as "Select Columns", The <span title="hint">header</span> {code} appears as the column name in the +display / not display+ boxes.
Is there any other way to put hints on Interactive reports so that this doesn't happen?
Marc -
How to Print the Report Column headers on each page of any report
Can someone offer assistance on how I can go about achieving the ability to show and print the Report Column headers on each page of any report using the Print Attributes of APEX 3.0? These reports will be printed using Excel and Word.
I read a thread with a similar request but the answer seems vague for my level of understanding.
I am connected to a print server and using BI Publisher.
Thanks,
RicHello Ric,
>> These reports will be printed using Excel and Word.
I'm not sure I understand what you are trying to do. You are using a very powerful tool – BI Publisher – why do you need Excel or Word for printing? Is there a special need only Excel or Word can provide?
One of the major advantages of using BI Publisher is that it's taking care of all these tedious tasks like reasonable page breaking, headers and footers, and also table headers.
Regards,
Arie. -
Incomplete List of Values in Interactive Report Column Headers
Oracle Database 11g 64-bit
Apex 3.1.1.00.09
I created an interactive report that results in over 10,000 records, and several of the columns have incomplete filter values when you click on the column header. It's not even close in some instances. It's not even showing the values that are loaded in the visible page.
I have tried recreating the report on a new page, as well as creating a database view with the query and then just querying the view (in case there was a problem with query complexity).
I'm at my wits end as to why this is happening. Have any of you seen this happen, and is there any way to get around it? I know I can write my own LOV query for the column headers, but those won't be dynamic like they are supposed to be out of the box taking applied filters into account.
Thanks in advance.Tim,
Did you find a solution to this. I have the same problem.
Cheers
Yog -
Interactive report Column headers
Hi ,
I am using apex 4.2,
My IR report contains more than 500 rows , so when I scroll down , I am unable to see the column headers.
How to make column headers to be visible even when I scroll down.
Please guide me to achieve that .
Thank you,
Nihar Narla.There is/was a plug-in (IR Plugin Package) that claims to support this.
See: http://apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/ir-plugin-package_108.html
I've never used it myself.
(more) PARS has also pointed out the following: http://theapexfreelancer.com/apex/f?p=APEXFREELANCER:IR_PLUGIN_PACKAGE:0
Howard -
FSG report output does not show column headers (XML Publisher)
Hi everyone
Iam required to create a template for an FSG report with 20 columns. Used copy of FSG:Fixed number of columns Template(FSGTEMP) to create the template because i need to do some conditional formatting(need to show negative values in red color).
here is the problem:
when i use the template and run the program the output i can see the row data but not the column headers..column headings are blank!
regarding the conditional formatting, can anybody tell me how to give the condition
iam able to give the condition for oracle reports but not for FSG reports as i dont see the column name in the 'data field' in conditional format
Regards
samOpen the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved.
Maybe you are looking for
-
Xmms wont open [solved]
I cannot get xmms player to open. Thru the gui when I click on the icon nothing happens. When I try to run it at the console as my user I get this: [tyler@eLINUXe root]$ xmms %U *** glibc detected *** double free or corruption (out): 0xb6dec5a4 *** A
-
Hi gurus, I want to know the name of the job that is used to transfer the currency values from R/3 to BW. From my understanding, this is the job that updates the TCURR table in BW. Any help is highly appreciated Thanks
-
Ok, im still new to Mac's, and I cant figure out why I cant get Skype to download on my Macbook Pro. I go to te Skype website, click on the download option for Mac OS and it goes to another screen saying "download should begin shortly, if not click t
-
Adobe Acrobat installer does not install...
downloaded the install file, ran it, the install screen (fuel gauge) never shows install progress, what's up with that?
-
[iPhone] Data in tables
I am looking at the SimpleIndexedTableView example app. I don't yet understand where data in tables is stored. I have looked (I thought) through all of the files included in the package and can't seem to find the list times zones of Abidjan through Z