Vertical Ruler and Preprinted Forms

I am creating a Bill of Lading in CR2008 which must be printed on a preprinted form on a dot matrix printer.
There are boxes which have to have information in them. I can measure on the form from the top and left where the data needs to go, but when looking at Crystal, it is hard to tell how the vertical ruler works.
In the Report Header, I have a 1 showing, then there is another 1 in the Page Header, another 1 in the Details.
How can you accurately measure from the top edge of the page down using the vertical ruler? Am I making this too complicated?
Thanks,
Gilley Estes
Welton USA

Pretty much what he said. I just did an invoice and packlist on dot matrix printer with pre-printed forms. You have to determine whether the printer is doing 8 lpi or 6 lpi and 10, 12 or 15 cpi. Adjusting all of your sections to be a multiple of .125" or .167" will let you back in to the vertical positioning. Make sure you use a mono spaced font available on the printer (usually Courier New) and font size 8 for 15cpi, 10 for 12 cpi or 12 for 10 cpi. You can then figure your horizontal positions based on that.
It will take some tweaking after you layout your first pass.

Similar Messages

Gray area between vertical ruler and edge of page – remove

I have a pages file where there is a large gray area between the edge of the page and the vertical ruler. I don't know where it came from but I want to get rid of it. I have a new file that I just opened from my templates and he does not have this large gray area.
I tried looking, clicking on things and scratching my head and nothing works.
I tried to add a couple J pigs to show what I'm talking about but can't do it. Anyway any suggestions would be highly appreciated.
TIA
David

I'm not sure what you're seeing.
Check the documents printer settings. They may be set for different printers. Perhaps Any Printer. If they'e not set for your printer, change them and see what you get.
Walt

Vertical Rulers and Guidelines

Are the vertical rulers and the guidelines used to help align objects gone in Pages 5.0, or is it that I simply do not know where to find them. Thanks.

Apple have said that they will bring back the vertical ruler, and improve the guides, in a future release.
Jerry

Form load rules are not working on display and edit forms

Hi
I have customized SharePoint 2013 list form using InfoPath 2013. I want to hide certain fields based on user group. I created rules on form load for that. These rules are working fine on New Form but are not working on display and edit form.
What can I do?

It could be because the value might have not changed ie, you might be checking for a particular value, the values might have got overwritten when the new form is saved, see if that value is blank or overwritten in display and edit forms.
I would first check the form load rules and check those values again in Display form and edit form, if the values are not getting cleared/overwritten.
It would be better if you could upload the screenprint.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Suggestions - Vertical Ruler or the ability to set horizontail guides for various view ports.

The suggestion link seems to be broken so I am posting here in hopes someone will see it. Edge Reflow would benefit greatly from the addition of a vertical ruler. Unless this is a view aready that I am somehow missing. Also it would be cool to be able to set a horizontal guides in the canvas grid (DOM). This would help in allowing the user set a guide for multiple viewing areas.
And the pie in the sky, Santa Claus Christmas list of all request would be the ability to "blend" break points. It would be cool to set a 2000px view and a bookend break-point at 1024px, work both compositions to the desired look and have a "blend tool" that scales all the elements to the desired look form 2000px to 1024px.

Hi Bobby, thanks for the suggestions!

Business rules attached to form

Hi
Business rules attached to form was disappeared, after we install 9.3.1 shared services services pack1.BR's is there in EAS and i can run them from there.But i can not see them in any where in planning.I am not able to see in the list of BRs, when i am creating new form as well.I checked the securityin EAS for Brs, it is same as before,i added our admin group as well, still ican not see in planning....
Plz suggest....
Thanks,

In EAS, check if the outline selected points to the application under the Planning server.
Check for the access privileges and locations within EAS.
Restart EAS, RMI and Planning. Login to Planning as the Planning administrator, then into EAS and check.
Try using another administrator rather than the default admin.
HTH-
Jasmine.

How to pass a rule in activesync Form

Hi All,
I have created a rule with 2 arguments say A and B.
I want to pass this rule in a activesync form.
As per the sun technical ref am passing the rule as
<Field name='waveset.Type'>
<Expansion>
<rule name='CALL'>
<argument name='dataType' value='A'/>
<argument name='data' value='$(activesync.B)'/>
</rule>
<Expansion>
<Disable>
<neq>
<ref>feedOp</ref>
<s>create</s>
</neq>
</Field>
When am passing this value in to a form this code is not at all working.
Where as the same rule when am passing it in a field in a ordinary form its working fine.
Can any one please analyse the code and say whats going wrong in the code or how to make the code workable.
Thanks in advance.
Regards
Gajendra Nagapurkar

I have also gone thorugh the same. For some reason when u pass an argument in an active sync form it wouldn't work properly. Instead if u hard code the argument value as activeSync.B in the rule itself it will work. I don't know for what reason it happens. But I have experienced the same and modified my rule and hard-coded to the active sync field.
I don't know whether anybody has tried passing arguments from an active sync form and been successful. This is no special type of form and excutes like anyother form but during active sync process it doesn't work.

Unofficial Forum Rules and Guidelines

I realize there is an official Community Guidelines thread, but I feel it should cover more topics than it does. So here is my attempt to have a thread I can point new users to, if they are unsure how forum etiquette works.
Before Posting a Question
Many posts have been made on the forums over the years and many topics have been covered. You are likely not the first person to attempt something, or having difficulty. Search the forums first for the question you would like to ask. NI's forum search works well but feel free to use Google to search the forums. Try searching with alternate terms, like "System Tray" instead of "Icon Tray".
Posting a Question
When posting a question you should first follow the guidelines linked earlier. In addition to those points I'd like to mention a few more:
Not everyone on the forums speaks English. If English is not your native language feel free to post questions in your first language, but be aware that there are several non-English speaking sub-forums. If you post a non-English question in the English forum, you may or may not get people who speak your language. Stick to forum for that language to ensure you get the help you need.
Post in the right sub-forum. Language is the first sub-forum to consider, but topic is another. If you are asking a question about LabVIEW exams, it is better to post in the Certification board, rather than the LabVIEW board. If you posted in the wrong forum ask a moderator to move it to the appropriate section.
Have a useful title. The title of your question should never be "labview" for "fpga". Your title should also not be a paragraph. It should be a quick summary of the topics your post is going to discuss.
Do not use caps lock unless you are really yelling. It would be rude for me to ask a question by yelling and the same goes for the forums. This goes for the title and the post.
Do not beg for help using words like URGENT, or LIFE AND DEATH. This is again rude, we are largely volunteers that like to help, but not when we are being yelled at.
Use words not letters "NEED hlp Plz R U labview xpert?" Use full English sentences. If you have trouble with this please refer back to speaking in your native language, or go back and take English class.
There is rarely a need to change the font size, color or style from the default settings. You are wasting your time, and likely making your post harder to read. Stick with the default font styles.
Try giving as much information about the conditions of your question. Things like: What version of LabVIEW are you using? What operating system are you using? What hardware are you using? and What sensors are you using? are a few common ones.
If you want to ask the same question on another LabVIEW board like LAVA, feel free to do so. One thing that helps collaborate efforts is to provide a link in your post back to the other place where the question was asked. This way someone on the NI forums can see what has already been said on another forum.
When posting code post the actual code not a screenshot. You wouldn't take a screenshot of a text file and post it on a text language forum. Upload the actual VI, or zip several files and upload the zip. The exception to this rule is when uploading a VI Snippet. This is an image with the VI embedded in it, so the source is still intact.
When you don't get the help you want
If you posted a question and didn't get any response, or didn't understand the responses you got, do not make a new thread on the same topic. Doing this will fragment the conversation and you will have two groups of people working on the same problem.
Don't simply BUMP a thread with a new post without more information. This is a sign that you don't want to put in any effort and are simply nagging others to help you. If a thread goes dry and you want more help, try getting more information on the subject, or try something and reply to the thread with this new information. This shows you are willing to work towards your goal, and aren't just looking for others to do your work for you.
When you get the help you want
Volunteers put in effort to help you and they want to know they are appreciated. The forums have several ways to say "Thank You" to those that have helped. Here are the preferred methods.
Kudos
You can thanks a person on the forum by giving them a Kudo. A user on the forums can Kudo a post by another user once, but multiple users can Kudo the same post which can highlight posts that a collection of users find useful.
Here is a thread discussion when users choose to give Kudos.
Marking Solutions
Any reply to a post can be marked as a solution to the post, if the sub-forum supports marking solutions. This is helpful because the thread will get a green check mark showing a solution to the question has been found. Threads can have multiple posts marked as a solution, but it is best to limit the number of posts that are the solution. Mark the posts that answer the question, not just helpful posts. A helpful post can be Kudo'd, but doesn't need to be marked as a solution.
Things Not To Do
Do not send private messages to a user asking a question. Forums exist so we can work to solve a problem as a group. Contacting someone privately causes that to not work.
Do not post personal information. This includes Email, or phone contact information. Spam bots crawl forums like this looking for your information. This also means don't make your user name an email address.
Do not have huge signatures. They waste space on the forum and can clutter the conversation. Signatures are okay, but large ones are discouraged.
Do not post homework assignments. We are not going to do your homework for you. You are welcome to ask specific questions about things you don't understand. But don't post your homework and expect someone to do it for you. You won't learn this way.
Do not resurrect old threads that have nothing to do with the new question. A post from 2002 about how to setup a DAQ task will likely not be related to your question about reading a serial port. Make a new thread asking your new question.
Looking For Free Training
Many times new users of NI hardware or software just don't know where to start. They will ask a question but without knowing the terms, or the intended purpose, they will not be able to form a proper question. Here are some free training tools primarily focused on LabVIEW and NI hardware.
NI Learning Center
NI Getting Started
-Hardware Basics
-LabVEW Basics
-DAQ Application Tutorials
3 Hour LabVIEW Introduction
6 Hour LabVIEW Introduction
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
More general forum etiquette tips can be found here. Not all of these are relevant to the NI forums but there is very good advice in there. There is also the How To Ask Questions The Smart Way.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

When attaching code:
Include all subVIs, typedefs, and global variables, etc.
Remove all passwords from password protected VIs.
Do NOT include anything from vi.lib or that is part of a standard LabVIEW installation.
Do NOT include libraries from commercial third party drivers unless you suspect them to be the cause of the problem.
If it is an entire project, zip everything up. (A "*.lvproj" file does NOT contain anything useful. All code referenced in the project needs to be included).
If you attach more than one VI, tell us the name of the toplevel VI.
Set all controls to typical values, then make them default before saving. Do not set indicators to new default values, especially e.g. graphs containing huge amounst of data.
Ideally, all we should need to do is open and run the VI to see the problem.
The default data should be typical and not biased in any way. If an input is a matrix, don't make it square or symmetric unless that is guranteed to always be the case.
Tell us how to demonstrate the bug (e.g. Run A, set control B to X, Indicator C is now Y while I expect it to be be Z instead, etc.). Include these instruction as diagram comment on the toplevel VI.
If the problems is with reading a file, include a sample file that demonstrates the problem.
If you run the newest LabVIEW version, you might want to downconvert to a lower version before attaching (file...save for previous...). This way there are more people that can potentially help. (Of course if the suspected bug depends on the version, you should attach the version that demonstrates the bug.)
If you make claims about speed or benchmarking:
Tell us what you consider fast or slow. "Seconds" could be fast for one problem while "microseconds" could be considered slow for another.
Include your benchmarking code.
Make sure the speed test is sound and not polluted by debugging settings. Keep the front panels of subVIs closed, watch for code running in parallel, and avoid front panel updates.
Make a distinction between slow code and slugginsh FP responsiveness.
LabVIEW Champion . Do more with less code and in less time .

Information about the rules and regulations to take to create reports in BI

Hi Gurus,
i got the next project in a client where is working with SAP BI since a few years, they have the next problem:
- no set rules and standards that kind of reporting should be migrated and used by BI
(Examples of the problem in BI:
Reports with hundreds of records in detail.
Many files export to unix trough the list cube to get a large file with detail.
reports that serve as daily operations and not analysis, etc)
Now you can imagine the many problems that arise when a report is not ready in the morning because a infopackage failed or there were delays, or the Unix disk capacity is full, delay in run of the reports, etc.
My mission is first create a series of rules and regulations to serve both functional and technical area of the BI team to know so when I request is reviewed first by the functional and evaluate first is this request is a candidate to be created in BI, although BI team arrives, also be aware of these rules and approve if it will be developed in BI.
through this form either creates a culture and norms of the role of BI for new projects or requirements, i m a SAP BI consultan certified, i know tha basic rules, but i am looking for some file or some informatión that support my rules tu be presented to the managers and the team, i will really appreciat your help, thanks !

Dear Richard,
For sending the data into external system or in app server, we have differnt types of approches.
1) via APD.
2) Via Open Hub destination.
3) Via transaction: RSCRM_Report.
In the above process we pros and cons:
>>but best one is using open hub destination which will extract the data into flat file fast.
>> We can do calculation in a easy way at open hub level.
I beleive OH is fexible and am interseted to know why we are going with LISTCUBE and wat is added advantage by comparing with process above.
Best Regards,
Maruthi

Vertical tables and date tracked fields

We are in process of remodeling our database. We will have true 3rd normal form tables with vertical structure and date tracked fields among many other changes. I'm interested in Toplink's support capability.
We are evaluating using stored procedures to do CRUD operations and use toplink to do only reads. Has anyone used toplink in this type of database model and how is it implemented?
Thanks

Sure. Having your database in 3rd normal form will only make your object model more consistent and more efficient to modify.
TopLink has great stored procedure support and also performs very favourably on reads, so it serves this kind of model quite well. The caveat is that TopLink tends to cache fairly agressively be default. If you are doing writes outside of TopLink then you will need to determine a strategy for refreshing cached objects that may have changed in the db. TopLink does provide a number of ways that you can use to do that, including cache eviction policies, implicit and explicit refreshing, and cache hit disabling when necessary.

Planning application Business rules and Rulesets are disappearing

Hi,
Our Planning application Business rules and Rulesets are disappearing after services refresh.
*2011-09-28 09:45:24,740 WARN Thread-16 com.hyperion.calcmgr.common.GenericLogger - [Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_CALC.UKCALCMGRDEPLOYEDVIEW1) violated*
2011-09-28 09:45:24,740 WARN Thread-16 com.hyperion.calcmgr.common.GenericLogger -
com.hyperion.calcmgr.common.CalcMgrLog4jLogger$HBRLogThrowable
     at com.hyperion.calcmgr.common.CalcMgrLogger.warning(Unknown Source)
     at com.hyperion.calcmgr.excp.DatabaseException.<init>(Unknown Source)
     at com.hyperion.calcmgr.excp.DatabaseException.<init>(Unknown Source)
     at com.hyperion.calcmgr.excp.DatabaseException.throwException(Unknown Source)
     at com.hyperion.calcmgr.database.DBDeployView.add(Unknown Source)
     at com.hyperion.calcmgr.database.DBDeployedView.setDeployedStatus(Unknown Source)
     at com.hyperion.calcmgr.database.DBRepositoryManager.setDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.core.CalcMgrServer.setDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.core.CalcMgrServerService.setDeployed(Unknown Source)
     at com.hyperion.calcmgr.core.DeployManager.updateDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.abl.planning.PartialDeployer.deploy(Unknown Source)
     at com.hyperion.calcmgr.abl.planning.PartialDeployer.deploy(Unknown Source)
     at com.hyperion.calcmgr.abl.core.DeployThread.run(Unknown Source)
2011-09-28 09:45:24,740 WARN Thread-16 com.hyperion.calcmgr.common.GenericLogger - Error while executing query: 'insert into CALCMGRDEPLOYEDVIEW (PRODUCTTYPE, APPLICATIONNAME, APPLICATIONID, PLANTYPE, CALCTYPE, OBJECTID, OBJECTTYPE, NAME, DEPLOYTIME, BODY) values(?, ?, ?, ?, ?, ?, ?, ?, ?, ?)'
2011-09-28 09:45:24,740 WARN Thread-16 com.hyperion.calcmgr.common.GenericLogger - [Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_CALC.UKCALCMGRDEPLOYEDVIEW1) violated
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_CALC.UKCALCMGRDEPLOYEDVIEW1) violated
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.calcmgr.database.DBDeployView.updateDB(Unknown Source)
     at com.hyperion.calcmgr.database.SqlTable.insertDB(Unknown Source)
     at com.hyperion.calcmgr.database.QueryContext.insert(Unknown Source)
     at com.hyperion.calcmgr.database.QueryContext.insert(Unknown Source)
     at com.hyperion.calcmgr.database.DBDeployView.add(Unknown Source)
     at com.hyperion.calcmgr.database.DBDeployedView.setDeployedStatus(Unknown Source)
     at com.hyperion.calcmgr.database.DBRepositoryManager.setDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.core.CalcMgrServer.setDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.core.CalcMgrServerService.setDeployed(Unknown Source)
     at com.hyperion.calcmgr.core.DeployManager.updateDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.abl.planning.PartialDeployer.deploy(Unknown Source)
     at com.hyperion.calcmgr.abl.planning.PartialDeployer.deploy(Unknown Source)
     at com.hyperion.calcmgr.abl.core.DeployThread.run(Unknown Source)
2011-09-28 09:45:24,740 WARN Thread-16 com.hyperion.calcmgr.common.GenericLogger - Error while executing query: 'insert into CALCMGRDEPLOYEDVIEW (PRODUCTTYPE, APPLICATIONNAME, APPLICATIONID, PLANTYPE, CALCTYPE, OBJECTID, OBJECTTYPE, NAME, DEPLOYTIME, BODY) values(?, ?, ?, ?, ?, ?, ?, ?, ?, ?)'[[Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_CALC.UKCALCMGRDEPLOYEDVIEW1) violated
com.hyperion.calcmgr.excp.DatabaseException: Error while executing query: 'insert into CALCMGRDEPLOYEDVIEW (PRODUCTTYPE, APPLICATIONNAME, APPLICATIONID, PLANTYPE, CALCTYPE, OBJECTID, OBJECTTYPE, NAME, DEPLOYTIME, BODY) values(?, ?, ?, ?, ?, ?, ?, ?, ?, ?)'[[Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_CALC.UKCALCMGRDEPLOYEDVIEW1) violated
     at com.hyperion.calcmgr.excp.DatabaseException.throwException(Unknown Source)
     at com.hyperion.calcmgr.database.DBDeployView.add(Unknown Source)
     at com.hyperion.calcmgr.database.DBDeployedView.setDeployedStatus(Unknown Source)
     at com.hyperion.calcmgr.database.DBRepositoryManager.setDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.core.CalcMgrServer.setDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.core.CalcMgrServerService.setDeployed(Unknown Source)
     at com.hyperion.calcmgr.core.DeployManager.updateDeployStatus(Unknown Source)
     at com.hyperion.calcmgr.abl.planning.PartialDeployer.deploy(Unknown Source)
     at com.hyperion.calcmgr.abl.planning.PartialDeployer.deploy(Unknown Source)
     at com.hyperion.calcmgr.abl.core.DeployThread.run(Unknown Source)
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (EPM11_CALC.UKCALCMGRDEPLOYEDVIEW1) violated
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
Thanks
Radhika

This post may be helpful - Re: Business Rules are disappearing from forms in Hyperion Planning v 11.1.1.3
Cheers
John
http://john-goodwin.blogspot.com/

Issue in business rules attahed with forms (11.1.2.2.300)

We have attached Business rules with relavent forms but when we run business rule from form some other rule is run instead.

Hi Bilal,
So the Sales_Value rule runs regardless of what rule you attach to the form?
How are you running the rule? Run on Save, or through a right click menu? Just by clicking the rule on the left?
Can you confirm that:
In the Administer Forms and Ad Hoc Grids screen, the "Production_Quantity" rule id definitely attached and that in the Properties tab, you have the correct box ticked for that rule (e.g. Run on Save etc).
Can you also make sure that the "Sales_Value" rule is NOT present in the form in the same screen?
Do you get the same results when you run via Smart View?
Have you deployed the application since you changed the form/Added the rule to the Form?

Running Business Rules on Composite Forms

Hi,
I'm using Planning v11.1.2, and I am trying to get a business rule to run from a Composite web form. The version and entity are the only prompts in the business rule, and they are shared globally on the component forms. If I put the business rule on the component forms, it doesn't even make an attempt to run on save. If I put it on the composite form, it attempts to run, but fails ("An error occurred while processing this page. Check the log for details."
Shouldn't business rules be able to run from composite forms? If not, why is the option to put them in there? If so, does anyone have any insight into this problem?
Thanks,
Sabrina

Thanks John, but unfortunately, neither one of those is my issue. The first says I can't have the business rule on the base form if I have it on the composite form. The rule is not on the base form, and it still won't run on the composite form. The second one I don't understand at all. The symptom "Business Rules are not running with composite data forms when the 'Run on Save' option is checked". The cause "The Business Rule is not running when it is run from a base form." Huh? This is a cause? The solution: "You need to attach the Business Rule to the composite form, not just the base form." This would seem to indicate that I have to have the rule on both the base form and the composite form. It doesn't work no matter which way I set it up.
Furthermore, in testing to see what's going on, I tried taking off the hide prompt option, and the rule does not appear to be taking the entity from the page member on the form (it just displays the last entity chosen).
Sabrina

Print on preprinted forms

Hi guys,
Here is my question. How can I print on a preprinted form? Either with a Adobe software or with any third party software. Something like capturing the form's fields and create a blank form, fill the fields out and put the preprinted form in the printer to print out the data entered. Hope I am clear.
Another question. I scanned a job application form and put fields. When I tried to print the form, it came out all black. Just to let you know, there is no problem problem with the printer, because I printed out other forms and they came out just fine, but only one form comes out black. I did not make any changes in the printer's settings.
Thanks for your help.

Hi Goerge,
Sorry for the delay. Here is a picture of the form I was talking about.
https://www.pinterest.com/pin/514888169874006798/
Actually the fields on the forms are all filled up, but nothing shows, only the check boxes. By the way, this is a print out. All other forms I print come just fine, only this one comes out this way.
Thanks for your help.

Vertical Ruler in Pages '13

Did pages '13 do away with the vertical ruler? I need it!

Yes, it's gone.
A suggestion (which I've done): create a new Pages document and insert an image of a ruler, so that it's positioned down the left hand side. Start off with a screen "selection" grab of the Pages ruler from an A3 landscape doc and rotate it 90 degrees in Preview (save it as a png). Insert into the Pages doc and set in "Arrange" to stay on page, and the height to 29.7mm (US page sizes will need something different).
You then have this document open behind the one you're working on, slightly to the left to show the ruler, and with the window wider than the front one, in case you need to scroll down.
If this ruler image is the same size (scale) as the Pages one, the relative size should stay correct if you zoom both documents to the same %.
An alternative would be to include the ruler image in your actual document and delete it before printing (but Pages did not insert it at the right size, so this would have to set each time).
I create a lot of documents which are printed "two up", and need to know where halfway down the page is, to insert a section break, so the loss of the vertical ruler is rather annoying.

Vertical Ruler and Preprinted Forms

Similar Messages

Maybe you are looking for