Verve 450 quad - Contacts directory

Hi I bought the 4 Pack verve dect phone after reading on lots of reviews. Have not used the phone yet as its still being charged but what I have noticed that I would have to manually input all contacts on all handsets individually which I find is outrageous that this day and age I'm not able to do 1. Manually input numbers on base phone and all other three updates but better still 2. Insert sim from my mobile and this should upload all contact data or 3. download from my PC. The booklet completely avoids any mention regarding phone book entries excepting how to type in the contacts. If I'm missing a trick please help me o wise ones and if I'm right shame on BT for not having this facility as I now have to sit down and tediously enter all names 4 times. May be ill throw a phone party so ill have friends help me "specially when BT is proudly announcing that the verve holds 200 names for me its 200 x 4 can anyone help

found the answer on ,online boolket page 32  Mbawana

Similar Messages

  • BT verve 450 quad

    Hi I bought the Pack phone after reading on lots of reviews. have not used the phone yet as its still being charged but what I have noticed that I would have to manually input all contacts on all handsets individually which I find is outrageous that this day and age I'm not able to do 1. Manually input numbers on base phone and all other three updates but better still 2. Insert sim from my mobile and this should upload all contact data or 3. download from my PC. The booklet completely avoids any mention regarding phone book entries excepting how to type in the contacts. If I'm missing a trick please help me o wise ones and if I'm right shame on BT for not having this facility as I now have to sit down and tediously enter all names 4 times. May be ill through a phone party so ill have friends help me "specially when BT is proudly announcing that the verve holds 200 names for me its 200 x 4 can anyone help

    found the answer on, online Verve's complete detailed hand book.

  • BT Verve 450 - Loses year setting on power-off

    Ah,  now found out how to start a topic!
    Verve 450 quad set.   Every time we have a power cut, the date partially resets.  Time OK, Month OK, but year resets to 2007.   I find out when the answering machine says message received eg: Saturday instead of of Friday.  Correct the year, stores OK, then resets to 2007 on the next power cut.   Is there a firmware fix?

    Hi Clive,
    Many (many) years ago, part of my job entailed dealing with BT Shop queries and (if I remember correctly) when it came to replacing faulty equipment and working out if the product was still in warrantee we usually went by the date the issue was reported to us.
    In this case, as the warrantee date has passed chances we wouldn’t have been able to offer a free replacement as it’s out of warrantee (even if the issue occurred before it expired).
    Things might have changed since then though and it’s still worth contacting them about it, but I can’t make any promises I’m afraid.
    Let us know how it goes.
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • BT Verve 450 - Adding Handsets From Another System

    I have a BT Verve 450 Quad system and one handset has died - i replaced the battery, but it's dead! Thinking i'd be clever i purchased a used twin setup on Ebay - it all seems to function Ok, but how on earth do you get the handsets to work on the quad system ?
    Has anyone out there tried this with any success - any guidance greatly appreciated!

    Hi.
    have you had a look at the manual here:http://btsupport.custhelp.com/ci/fattach/get/19029​99/1297333827/redirect/1/session/L2F2LzEvdGltZS8xM​... you might see something in there that can help you.
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • BT Verve 450 keeps cutting out

    Hi
    I have a BT verve 450 duo and whenever I pick up the phone from the base unit when someone is calling the phone goes dead. However, if the same phone or the second phone is on the other charger phone there is no problem. I am sure there is a problem with the base unit. Any ideas?
    Kind regards

    Its odd that both handsets reset, but it could be a bad batch of batteries.
    I assume that when you received the phones, the plastic tap that isolates the battery supply was still in place?
    Did you remove the tab on both handsets?
    Have you checked that the batteries are makeing contact inside? Take them out and then put them back in again.
    There is a BT help page here.
    http://bt.custhelp.com/app/answers/detail/a_id/10853/~/bt-verve-450
    There is a helpline number on that page.
    All I can suggest it that you contact the place you purchased the phones from, and ask for a replacement.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • BT Verve 450 Ring Tone

    We have a Verve 450 base unit and three extra handsets. The base station does not ring loudly enough when someone calls and a remote handset does not ring immediately. I have tried adjusting the ringtone sound level but it will not ring loudly enough. Can somebody give me guidance on rectifying this fault please ? Many thanks

    Hi TonyVS
    Welcome to the community.
    Have you tried the instructions for ringer volume in the user guide. You can view the user guide by clicking the link below:
    http://bt.custhelp.com/app/answers/detail/a_id/10853/kw/verve%20450/c/1243,1899,1919
    Thanks
    Stuart
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

    have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac?  Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

    I think you may find helpful information here:
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC System Preference add-ons
    All Unsanity Haxies Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5 Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Transferring files between two computers using FireWire.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • How to with the check box in Suppliers - Contact Directory

    EBS R 12.
    I am in need of finding a solution for the following:
    Payables Manager -> Suppliers -> Inquiry -> Select a supplier -> Go to "Contact Directory" -> Select a contact
    Under User Account section there is a check box.
    When I check the check box, the following action should happen:
    1. The "Username" field must contain the value of the "Email".
    2. Under "Responsibilities" "Sourcing Supplier" must be checked.
    I don't know where to put my hands to solve this problem.
    All helps will be appreciated. Thanks.

    Hi
    SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
    Then activate the auto PO creation in Vendor master - Purchasing view
    Check it out.
    Regards,
    raman

  • Search Contacts & Directory fails

    End users using OWA on Exchange 2013 CU5. Doesn't matter what browser or any other client-side information. I can give myself delegate access to various mailboxes and come up with the same error.
    They compose a new message. Type the name in the To.. field and the application pops the drop-down with the magnifying glass that reads "Search Contacts & Directory". When you click, it states in the same box "Can't connect. Please
    try again later."
    Troubleshooting steps, thus far:
    Recycle OWA Application Pools.
    Recycle ECP Application Pools.
    Recycle OAB Application Pools (yes, I know, this is for Outlook only).
    Restart all CAS servers.
    Nothing works. Has anyone else seen this and found a fix for it? It has to be something simple that I am missing.

    Hi,
    From your description, I would like to verify if the email address you search can be listed in Default Global Address List.
    Open EAC -> organization -> address lists -> Default Global Address List
    Best regards,
    Amy Wang
    TechNet Community Support

  • Creation of groups in contacts directory

    Hello,
    The operating system 10 doesn’t allow to create groups in the contacts directory, it's a real pity.
    It would be very interesting to be able to create groups (family, work, friend, unknown) and to associate specific bells to every group.
    This feature is to add for the next update software release.
    Thank you for your attention.
    Best regards

    Such Groups would be a very welcome and awaited addition, along with notifications of those Groups!
    Same for SMS.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?

    after upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?

    This started happening to me on my iPhone 4. Some text messages show only the numer they came from and those same numbers do not show the contact name in my calls list, even though the contacts are saved and synced via iCloud. I have tried to save different versions of the number in the same contact, but it won't work. If I call one of the recent numbers though, the conact comes up. I have tried reseting and restoring to no avail.

  • Connecting Non-BT handset to BT Verve 450 base uni...

    I have an elderly relative coming to stay and he has a "Doro PhoneEasy 100w" to help with his poor hearing and failing eyesight.
    He has asked if I could connect his second handset to my BT Verve 450 base unit to help with any phone calls he receives or makes.
    I've looked in my user guide but can't see any instructions on increasing the number of handsets that can be registered to the base unit.
    He assures me his handset is "GAP" compatible.
    Any help and guidance would be very much appreciated.
    Ruth. 

    Just did a quick google search and yes his handset is a GAP compliant handset but I am not sure how to get toe Doro handset into registration mode. it should be in the menu somewhere.
    Once the handset is in registration mode, press the "find" button on the BT verve basestation until it beeps and it should register the phone to the base station.
    I think the process is the same for the BT verve handsets to the BT graphite ones I have reigstered a GAP handset to my graphite 2100 basestation

  • BT verve 450 base settings help

    Hope some on can help??
    Recently bought  the Verve 450 every thing works fine accept the base unit/answer machine. I have caller display so everything works from the point of view. What I cant seem to do is change the time and date on the answering machine, but the hand set is showing the correct time
    I have tried re registering the phone etc but nothing seems to work.
    Pleas help......

    Hi Chockie,
    the answer machine should be set automatically if you have the caller display (as your handsets are showing corrcet time it is likely the phone has a problem, or has got out of synch with the handset).
    Try setting the time manually -
    press menu and scroll 'Redial' to 'settings' and press OK.
    Scroll 'calls' top 'clock/time/alarm' then ptress ok,
    date/time is highlighted, press ok.
    the default time is in 24hr clock, to change scrol with the 'phonebook' or 'sms' button to choose 12 hour clock.
    similar thing for the date formatt either  day/month or month/day using the 'phonebook' or 'sms' button.
    use 'calls' to scroll to to 'enter time' and input the time, same again for the date. then press ok to save (on page 10 of the user manual).
    If this doesnt work, try disconnecting the unit from the power and line for 10-15 minutes to reset.
    If this last tatic doesnt solve the problem, then the phone is faulty and if under warranty take it back to wherever you bought it from.
    Hope that helps.

  • BT Verve 450

    Okay - second time lucky as Preview ate up my earlier post :*(
    I have a BT Verve 450 which does not work with voicemail options no matter how hard or often I press the selected option. Eventually the voicemail kicks in with 'sorry didn't understand' etc and then repeats the blessed options all over again, before cutting me off.
    Anyone else had this?
    Anyone suggest a solution?
    Thanks in advance, Euphrosene (this time unpreviewed!)
    artist-writer-author
    www.euphrosenelabon.com

    Many thanks, Mary.
    I changed the settings and planned to ring a number that uses voicemail but, as luck would have it - and on a Sunday pm! - a guy answered the 'phone. So I'll have to try it on another one tomorrow.
    But thanks again for taking the time to respond.
    Euphrosene
    artist-writer-author
    www.euphrosenelabon.com

  • BT Verve 450 twin won't ring out ! HELP PLEASE

    we have just been on holiday for a week, phone was working fine when we left however on our return the phones will not ring out when a caller ring us ! all that happens is the screen flashes up and says silence on the bottom of screen then goes back to standby screen, the caller thinks its ringing out when it isn't. can anyone tell me how to solve this issue ?
    i have re set handsets and base to default and tried everything i can think of , its driving us nuts !!

    If you search the community for Verve 450, you will find many problems and solutions.
    A display of "silent" would suggest volume turned down to low, or ringer muted.
    I assume that you have powered the base station down for a while, then powered it up again. This will reset any locked up hardware.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for