Very critical error in migration(Hyperion 9 to Hyperion 11)

Hi All,
I am facing very critical error during the migration. I have two servers, one with Hyperion 9 and other with Hyperion 11. I migrated(Planning Application, BRs) the Planning application from Hyperion 9 to Hyperion 11. Migration went well. Everything is working fine.
Both the servers(Hyperion 9 & Hyperion 11) in the same network. If i disconnect the Hyperion 9 server from the network, some of the Planning form and some Business rules from Hyperion 11.1.1.3 are not working. It pointing the Old server(Hyperion 9).
Please guide me in this situation.
Thanks,
PC

Hi John,
Thanks for your prompt reply.
Some of the forms(Recurrent Exp) and some of the business rules are not working. For business rules, i checked the locations. All the locations belongs to Hyperion 11 only.
Where i have the check the repository configuration("*check the config of the repository*")?
Thanks,
PC

Similar Messages

  • Critical error in the hyperion server

    Hi all,
    My server is working fine with all the hyperion products. In the afternoon, my admin change the IP of the server to connect the internet and update the Antivirus. After restarting the system. All the Hyperion products are down.
    Server : Windows 2003 server sp1
    DB : Oracle 11g
    Please find the Shared services log below
    *java.sql.SQLException: [Hyperion][Oracle JDBC Driver] Error establishing socket to host and port: hypplan:1521. Reason: Connection refused: connect*
    Please guide me in this situation.
    Thanks,
    PC

    The error says it is trying to connect to oracle host hypplan and it can't connect.
    So it looks like it can't resolve hypplan to the correct address or maybe the ports are being blocked, maybe the antivirus is causing an issue.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while migrating users using CSSImportExportUtility

    Error while migrating users using CSSImportExportUtility
    I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
    When there was only native directory in HSS, i can export these information successfully.
    But when I enabled NTLM external user authentication following error occurred:
    Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
    at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
    d)
    at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
    at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
    Source)
    at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
    at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
    at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
    at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
    at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
    e)
    at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
    at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
    I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
    Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
    You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
    To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
    NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
    NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
    ? For HSS 9.3.1:
    %HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
    ? For HSS 9.3.0:
    %HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
    ? For HSS 9.2.0.3:
    %HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
    ? For HSS 9.2.0:
    %HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
    I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
    I configured PATH by setting to above, and tried CSSExport again, still failed.
    Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
    So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
    Does anybody know the solution ?

    I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
    -- Sergiusz

  • Some critical errors in Planning, Business Rules and FR

    Dear All,
    I am facing some critical errors in Hyperion Plannign 11.1.1.3. We did the migration of BR rules from one server to another server. Migration went well. When i running any one of the rule, it throws the below errors:
    If i run any one of the FR reports from workspace, it throwing the same errors
    *Detail:Cannot calculate. Essbase Error(1023040): msg from remote site [[Wed Dec 16 15:58:32 2009]Local////Error(1042003) Network Error [11004]: Unable To Locate [hypplan] In Hosts File]*
    hypplan - Source server name(i took the BR rules backup in XML format)
    Please guide me in this situation.
    Thanks & Regards,
    PC

    Dear John,
    Thanks for the prompt reply. I checked all the locations alias, its fine.
    Account dimension creating problem for Business rules.
    I have Rollup BR here
    CALCDIM("Account") - It throwing the error as (*"Detail:Cannot calculate. Essbase Error(1023040): msg from remote site [[Wed Dec 16 15:58:32 2009]Local////Error(1042003) Network Error [11004]: Unable To Locate [hypplan] In Hosts File]"*)
    CALCDIM("Employees") - Its working fine
    If i specify anything related to Account dimension, it throwing above errors.
    Thanks,
    PC

  • ALC-UPG-221-002: Errors while migrating archive session Ids.

    I am doing an out of place upgrade from ES2 to ES4.  I have run the Turnkey ES4 upgrade, installed SP1, copied the GDS from the old location to the new location and run Configuration Manager.  When I get to the "Perform
    critical tasks before component deployment" screen and click the Start button I get this error:
    10:07] ALC-UPG-002-505: Disabling UserManager synchronization.
    [10:07] ALC-UPG-001-501: Executing [Application Manager] plugin ...
    [10:07] ALC-UPG-001-503: [Application Manager] plugin execution failed, error message from plugin is [ALC-UPG-221-002: Errors while migrating archive session Ids.].  See LCM logs for details.
    [10:07] ALC-UPG-002-506: Enabling UserManager synchronization.
    The LCM log has this:
    [2014-08-06 10:32:58,555], INFO, AWT-EventQueue-0, com.adobe.livecycle.upgrade.gui.UpgradePhaseDialog, ALC-UPG-002-505: Disabling UserManager synchronization.
    [2014-08-06 10:32:58,560], INFO, Thread-32, com.adobe.livecycle.lcm.feature.lcServer.LCServerConnector, LC Connection properties: {DSC_DEFAULT_SOAP_ENDPOINT=http://localhost:8080, DSC_TRANSPORT_PROTOCOL=SOAP, DSC_CREDENTIAL_PASSWORD=********, DSC_REQUEST_TIMEOUT=1200000, DSC_CREDENTIAL_USERNAME=administrator, }
    [2014-08-06 10:32:58,560], INFO, Thread-32, com.adobe.livecycle.lcm.feature.lcServer.LCServerConnector, Validating connection...
    [2014-08-06 10:32:59,961], SEVERE, Thread-32, com.adobe.livecycle.upgrade.control.PhaseRunner, Aborting.  Invocation of method [configurePreDeploy] failed for com.adobe.livecycle.upgrade.plugins.from9xto100.applicationmanager.Upgrade9xTo100Applicat ionManagerPlugin.  Caught com.adobe.livecycle.upgrade.UpgradeException, message: ALC-UPG-221-002: Errors while migrating archive session Ids.
    com.adobe.livecycle.upgrade.UpgradeException: ALC-UPG-221-002: Errors while migrating archive session Ids.
    at com.adobe.livecycle.upgrade.plugins.from9xto100.applicationmanager.Upgrade9xTo100Applicat ionManagerPlugin.configurePreDeploy(Upgrade9xTo100ApplicationManagerPlugin.java:110)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:606)
    at com.adobe.livecycle.upgrade.control.PhaseRunner.run(PhaseRunner.java:244)
    at java.lang.Thread.run(Thread.java:724)
    [2014-08-06 10:33:01,763], INFO, AWT-EventQueue-0, com.adobe.livecycle.upgrade.gui.UpgradePhaseDialog, ALC-UPG-002-506: Enabling UserManager synchronization.
    Nothing tells what the errors are.

    Dear Pallavi,
    Very useful post!
    I am looking for similar accelerators for
    Software Inventory Accelerator
    Hardware Inventory Accelerator
    Interfaces Inventory
    Customization Assessment Accelerator
    Sizing Tool
    Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
    Request help on such accelerators... Any clues?
    Any reply, help is highly appreciated.
    Regards
    Manish Madhav

  • Browser on 8310 SmartPhone Edge comes up with Critical Error and cannot be used, help please?

    Hi, my name is Sater and I'm the lone I.T. guy for a small medical device company (about 40 ppl) based in Fremont, CA.  So...
    All of a sudden my vp of marketing comes in and says that he can't use the Browser function on his BB (8310 SmartPhone Edge) anymore.  Naturally I'm intrigued, but this is a very strange error that pops up.  It doesn't matter how many settings I go in and change, there's no budging it.  Here is what it's telling me...
    "Unable to connect to the selected Mobile Data Service, please try again later.  If the problem persists please contact your administrator."
    So I decide after about an hour of messing with settings and getting nowhere to call AT&T support.  They said when that error comes up with "please contact your administrator", it's because it can't connect to the BES server anymore and that we would have to consult that with whomever runs that server.  To give you a little background, we went through an outsourced Exchange provider called TheMessageCenter.com. They were alright, but my VP of R&D was pretty bent by some of the lack of customer service skills they presented to him when he was in an email crisis.  Needless to say one of the very first missions I ever had at this place was to find a new email solution and integrate the migration.
    So basically AT&T said they couldn't do anything and that I would have to contact our outsourced providor (TheMessageCenter.com, since we ran both Exchange and BES through them before we switched) back to get the settings cleared off the BES server hosting his phone Pin and info.  I called them up, (mind you we had been away from TheMessageCenter.com for a good couple weeks now) and they claimed they had no other active processes running for our company anywhere on their BES servers or frankly, ANYWHERE lol.  So naturally he's looking at me to fix this, and I am seriously stumped!  Should I do some kind of Factory reset?  If so, how can I load all his contacts/settings back the way he had it?  Any help on this matter, (especially if treated as urgent... I know you hate to hear that, but I said it for all you I.T. guys haha) would be GREATLY appreciated!!  Thanks
    Respectfully,
    Sater K.
    Systems Administrator
    SpineView Inc.
    Fremont, CA 94539

    Hi,
    The browser icon uses the BES service, unless you have signed up for the BIS ONLY servcie, wherein you get access to the internet through RIM's servers.
    Since your servcie is a BES servcie the access to the internet is through the BES.
    The MDS is a service running on the BES to authenticate you. (and thus the error)
    So, No BES = No  Internet access using the Browser icon!
    So, I need a little clarificatuioin. 
    Did you move from one BES to another? Or did the user simply switch carriers?
    It sounds as if you moved from one third company BES to another third company BES... Is that right?
    If so then contact your New BES and ensure that they allow ppl to use the MDS servcie for internet access (Most companies charge extra for that feature! - Because they can!).
    If your hosting the BES (Now), and it was Themessagingcentre.com before, then you need to Reactivate the Handset for the  new BES. I have a feeling that he is now getting the emails through the BIS service and the handset wasnt wiped and so it is stil trying to access the old BES....
    So can you please give details such as:
    BES - where was it hosted:
    BES - where is it now hosted:
    NEW BES: Is the MDS service enabled and can people currently use it to browse?
    Have you tested with other BB handsets to ensure you/user  are clicking the same icons on both handsets (most ppl do different things to access in their own way, so simply asking them if it works doesnt help!)
    The alternative is to use the expensive WAP browser. It will work but will rack up huge charges.
    Let us know how it goes...
    Checked out my Blackberry FAQ's and Links to Needed Articles here
    http://darkeen.homelinux.com/index.php/Blackberryfaq

  • Windows 8.1 and IE11 - Critical Error: Object doesn't support property or method 'addEventListener'

    Our SharePoint 2010 sites don't work very well in Windows 8.1/IE11!!
    When opening list items or forms etc we get Critical Error : Object doesn't support property or method 'addEventListener'. It looks like it's possibly linked to InfoPath forms. Given that a large chunk of our users will probably be upgrading
    to Windows 8.1 as we speak this is slightly worrying!
    Has anyone else noticed this, or is it something to do with our deployment?  We're running SP2010 SP2 with latest CU.

    In older versions of IE, attachEvent is
    used to attach an event handler for some event on some element. But as per the update , starting with IE11, attachEvent is
    deprecated and you should use addEventListener instead.
    IE has included support for addEventListener from
    IE9 and above only. So if you still need to support IE8, I suggest you use some cross-browser library like jQuery to bind event handlers instead of vanilla javascript.
    As you're already using jQuery, you can bind events like below
    $('#yourElement').on('click', function(){
    // do something when you click on yourElement

  • ESS Leave request screen giving a critical Error in production server

    Friends,
    We are in a critical face of ESS implemetation.
    We are doing an ESS MSS implementation for country grouping 99.
    When we moved our changes to production server after succesful testing in quality, getting the following Critical error for Leave Request Screen.
    java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
         at java.util.ArrayList.RangeCheck(ArrayList.java:512)
         at java.util.ArrayList.get(ArrayList.java:329)
         at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:272)
         at com.sap.aii.proxy.framework.core.AbstractList.get(AbstractList.java:230)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCList.get(DynamicRFCList.java:281)
         at com.sap.tc.webdynpro.progmodel.context.Node$ModelElementList.getElement(Node.java:2543)
         at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
    Other areas like personal Info & who is who are working fine.
    Leave request was working fine in Development and Quality servers and it never worked in Production server.
    It worked fine with same config, with same master data and same employee & org structure in quality server.
    We tried the following things:
    1. Checked and confirmed the sequence of transports for configs and Developments to Quality and Production.
    Even compared the table level entries and ABAP codings B/n dev and Production. All are same.
    2. Moved the workflow changes to production and activated the same. No change found after that.
    3. Gave SAP all authorization in R/3 and full authorization from portal side as well.
    4. Assigned the userid to different employees and checked the masterdata of employees.
    5. Checked the note 1388426.Every thing mentioned in the note is there in the system.
    6. Verified Rule groups and WEBMO feature are correct and same as in quality.
    As our go live date is very near, request your help .Thanks in advance for your help.
    Regards,

    Customisation of Leave request is mising in your system, please check the rule group using PTARQ.

  • Portal Error (A critical error...) after removing "Administrators" group

    Hello experts,
    I'm very new on the Portal topic and faced with an error on our portal environment (SAP ECC 6.0 and SAP Netweaver 7.01)
    I've created a custom role with some worksets, folders and SAP standard delivered iView inside.
    My portal dummy user is owner of this role. Furthermore he's assigned to the groups: "Everyone", "Administrators" and "Authenticated Users". The corresponding user in R/3 backend has SAP_ALL.
    When I log-on to portal it's working fine, iViews, etc. are properly loaded. But thanks to the "Administrators" group, the user can access the tabs "Content Administration", "System Administration" and "User Administration" which should be obviously not the case. When I remove the group "Administrators" from the portal user, the 3 tabs are not displayed anymore. Therefore the iView from my custom role are not loaded any more. I get an error message in main screen saying "Critical Error. A critical error has occured. Processing of the service was terminated. Unsaved data has been lost. Contact your system administrator".
    A colleague told me that it might be an issue on portal permission. I went via tab "System Administation" > "Permission" into the PCD and gave to my roles, folders and an example iView the following permissions:
    - Name: Everyone; Administrator: Full Control; End User: checked
    - Name: Authenticated Users; Administrator: Full Control; End User: checked
    As I've used Delta Links I gave these permission to the SAP delivered iViews, too. Unfortunately the error stays the same.
    Please advice what's missing.
    Thank you so much, Jessica

    Hi,
    Thanks for your reply.
    I started the NWA and went to Analysis > Debug > Logs and Traces.
    There is a fatal error stated but the explanation is not very detailed:
    Severity: fatal; Message: n/a; Category: /Applications/Xss; Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent; Application: sap.com/tcwddispwda; Host: pesap57; Node: Server 0 26_91224
    The message is displayed twice (again: Severity: fatal; Message: n/a; Category: /Applications/Xss; Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent; Application: sap.com/tcwddispwda; Host: pesap57; Node: Server 0 26_91224)
    These errors are not in the log when I add the Administrators Group.
    Thanks for your advice, Jessica

  • Critical Error installing CS3 on Win7 64bit

    Hi all,
    I've combed through the forums and tried every fix that I've read, however nothing has worked.  I've just been given a new work laptop with a clean install of Windows 7 64-bit Enterprise Edition running SP1.  Full administrator privledges.
    I am attempting to install Adobe Photoshop CS3 straight from the DVD, so no updates, patches, etc.
    After running either the autorun or directly setup.exe within the Adobe CS3 folder, the Initializing Adobe Photoshop CS3 bar makes it between 80-90% before jumping to the Loading Setup screen where I'm presented with the error, "Critical errors were found in setup. Please see the Setup log file for details."
    OK, the support pages have had me look for "FATAL" (case sensitive) within the setup log.  It appears on the very last line of the 80 mb text file.  Here's the surrounding elements:
    loading page "installationProgress" from C:\Program Files (x86)\Common Files\Adobe\Installers\2ac78060bc5856b0c1cf873bb919b58\resources\pages\installationProgre ss\installationProgress.js
    updating path to Win32
    WizardControl: loading page "complete" from C:\Program Files (x86)\Common Files\Adobe\Installers\2ac78060bc5856b0c1cf873bb919b58\resources\pages\complete\complete. js
    HTML data complete: systemCheck
    Using cached language set
    HTML data complete: eula
    Using cached language set
    Using cached language set
    [    6460] Thu Aug 09 15:44:20 2012 FATAL
    Critical errors were found in setup
    Please see the Setup log file for details.
    [    6460] Thu Aug 09 15:45:11 2012  INFO
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    I've used Adobe Cleaner.  I've been through the registry.  I'm not sure where to turn now.  Any help?
    Edit: additional system specs:
    160 GB free on C:
    4 GB RAM
    Adobe Reader and Acrobat are also installed, however Acrobat was installed well after I began receiving this error.  I haven't tried running it with Reader completely uninstalled.

    You do know that it's not supported to run Photoshop CS3 on Windows 7, right?
    That said, it should be possible to make it work.
    Have you tried running the installer As Administrator?  UAC doesn't actually GIVE you administrative privileges unless you specifically escalate the installation.  Complete unawareness of UAC is one of the reasons Adobe doesn't support running Photoshop CS3 on Windows 7.
    If you're saddled with problems running older applications on Windows 7 and really need the compatibility vs. the dubious added protection UAC provides, there is a way to turn UAC off.  But I suggest you read about UAC and fully understand what it does before taking that route.
    -Noel

  • Very Critical!!!! Please!! Please!! help me on this

    Hi
    This is very critical, please give me a solution... if you want i will send you the whole code of the program.
    Below is the code of the program:
    read a message short and long text using the BAPI *
    BAPI_MESSAGE_GETDETAIL of the object BapiService. *
    REPORT ZSRJVBAPI.
    TYPES: BEGIN OF TY_PRCTR_KEY,
            PRCTR TYPE PRCTR,
            DATBI TYPE DATBI,
           END OF TY_PRCTR_KEY.
    TYPES: TY_T_PRCTR_KEY TYPE TABLE OF TY_PRCTR_KEY WITH KEY PRCTR,
           TY_T_BUKRS TYPE TABLE OF BUKRS.
    Data declaration
    DATA: GT_PRCT1_BUKRS     TYPE TABLE OF PRCT1_BUKRS,
          GS_PRCT1_BUKRS     TYPE PRCT1_BUKRS,
          GT_PRCT1_BUKRSX    TYPE TABLE OF PRCT1_BUKRSX,
          GS_PRCT1_BUKRSX    TYPE PRCT1_BUKRSX,
          GT_BUKRS           TYPE TY_T_BUKRS,
          GD_BUKRS           TYPE BUKRS,
          GS_TESTRUN         TYPE BAPI0015_9,
          GS_PRCTR_DATA      TYPE PRCT1,
          GS_PRCTR_DATAX     TYPE PRCT1X,
          GD_PRCTR           TYPE PRCTR,
          GS_TKA01           TYPE TKA01,
          GS_PRCTR           TYPE TY_PRCTR_KEY,
          GT_PRCTR           TYPE TY_T_PRCTR_KEY,
          GS_BAPIRET1        TYPE BAPIRET2,
          GS_BAPIRET2        TYPE BAPIRET2,
          GD_LOG_HANDLE      TYPE BALLOGHNDL,
          GS_LOG             TYPE BAL_S_LOG,
          GS_MSG             TYPE BAL_S_MSG,
          GS_CONTEXT         TYPE BAPI0015ID2,
          GS_DISPLAY_PROFILE TYPE BAL_S_PROF,
          GS_FCAT            TYPE BAL_S_FCAT.
    DATA: BEGIN OF GS_JVDAT OCCURS 0.
    DATA: BUKRS LIKE GD_BUKRS.
            INCLUDE STRUCTURE GJV_DATA.
    DATA: END OF GS_JVDAT.
    SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME.
    PARAMETERS: P_KOKRS  TYPE PRCT1-KOKRS VALUE CHECK OBLIGATORY,
                P_GROUP  TYPE PRCT1-KHINR.
    SELECT-OPTIONS: SO_PRCTR FOR GD_PRCTR.
    SELECT-OPTIONS: SO_BUKRS FOR GD_BUKRS.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK SELECTION.
    SELECTION-SCREEN BEGIN OF BLOCK MARK WITH FRAME.
    *PARAMETERS: P_ASSIGN
               TYPE PRCT1_BUKRS-ASSIGN_TO_PRCTR RADIOBUTTON GROUP MARK,
               P_DISPLY
               TYPE PRCT1_BUKRS-ASSIGN_TO_PRCTR RADIOBUTTON GROUP MARK.
    PARAMETERS: P_TEST   TYPE TESTRUN DEFAULT ' ',
                P_NO_CCC TYPE BOOLE_D DEFAULT SPACE NO-DISPLAY.
    SELECTION-SCREEN END OF BLOCK MARK.
    SELECTION-SCREEN BEGIN OF BLOCK FILE WITH FRAME.
    PARAMETERS: P_FILE   TYPE RLGRAP-FILENAME.
    SELECTION-SCREEN END OF BLOCK FILE.
    INITIALIZATION.
      GET PARAMETER ID 'CAC' FIELD P_KOKRS.
    AT SELECTION-SCREEN.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_GROUP.
      SELECT SINGLE * FROM TKA01 INTO GS_TKA01 WHERE KOKRS = P_KOKRS.
    authority check for groups
      AUTHORITY-CHECK OBJECT 'K_PCAP_SET'
               ID 'KOKRS' FIELD P_KOKRS
               ID 'ACTVT' FIELD '03'.
      IF SY-SUBRC <> 0.
        MESSAGE E734(KH) WITH P_KOKRS.
      ENDIF.
      PERFORM SET_HELP IN PROGRAM SAPMKEC1
          USING 'CEPC     '
                'KHINR    '
                GS_TKA01-PHINR
                GS_TKA01-KOKRS
                SPACE
          CHANGING P_GROUP.
      IF P_GROUP IS INITIAL AND SO_PRCTR[] IS INITIAL.
        MESSAGE W013(Z5).
        SET SCREEN SY-DYNNR.
        LEAVE SCREEN.
      ENDIF.
      IF NOT SO_PRCTR IS INITIAL.
        IF SO_PRCTR-LOW = '0000000000' AND
           SO_PRCTR-HIGH = '9999999999'.
          MESSAGE W011(Z5).
        ENDIF.
      ENDIF.
      IF NOT P_GROUP IS INITIAL AND
         P_GROUP = 'AMOCO_HIER'.
        MESSAGE W014(Z5).
      ENDIF.
      IF NOT P_GROUP IS INITIAL AND NOT SO_PRCTR[] IS INITIAL.
        MESSAGE E051(KM).
      ENDIF.
    START-OF-SELECTION.
      PERFORM GET_PRCTR_AND_BUKRS TABLES GT_BUKRS
                                         GT_PRCTR.
      PERFORM GET_JV_DATA.
    *END-OF-SELECTION.
    build up the call table for companycodes
      LOOP AT GT_BUKRS INTO GD_BUKRS.
        LOOP AT GS_JVDAT WHERE BUKRS = GD_BUKRS.
          GS_PRCT1_BUKRS-COMP_CODE = GD_BUKRS.
          GS_PRCT1_BUKRS-ASSIGN_TO_PRCTR = 'X'.
          GS_PRCT1_BUKRS-VNAME    = GS_JVDAT-VNAME.
          GS_PRCT1_BUKRS-RECID    = GS_JVDAT-RECID.
          GS_PRCT1_BUKRS-ETYPE    = GS_JVDAT-ETYPE.
          GS_PRCT1_BUKRS-JV_OTYPE = GS_JVDAT-OTYPE.
          GS_PRCT1_BUKRS-JV_JIBCL = GS_JVDAT-JIBCL.
          GS_PRCT1_BUKRS-JV_JIBSA = GS_JVDAT-JIBSA.
          APPEND GS_PRCT1_BUKRS TO GT_PRCT1_BUKRS.
      prepare xbar for function call
          GS_PRCT1_BUKRSX-COMP_CODE = GD_BUKRS.
          GS_PRCT1_BUKRSX-ASSIGN_TO_PRCTR = 'X'.    "relevant for change
          GS_PRCT1_BUKRSX-VNAME    = 'X'.
          GS_PRCT1_BUKRSX-RECID    = 'X'.
          GS_PRCT1_BUKRSX-ETYPE    = 'X'.
          GS_PRCT1_BUKRSX-JV_OTYPE = 'X'.
          GS_PRCT1_BUKRSX-JV_JIBCL = 'X'.
          GS_PRCT1_BUKRSX-JV_JIBSA = 'X'.
          APPEND GS_PRCT1_BUKRSX TO GT_PRCT1_BUKRSX.
        ENDLOOP.
      ENDLOOP.
    create an initial log file
      GS_LOG-EXTNUMBER  =
        'Ergebnisse der Buchungskreisänderung'(001).
      CALL FUNCTION 'BAL_LOG_CREATE'
           EXPORTING
                I_S_LOG      = GS_LOG
           IMPORTING
                E_LOG_HANDLE = GD_LOG_HANDLE
           EXCEPTIONS
                OTHERS       = 1.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    GS_TESTRUN-TESTRUN = P_TEST.
    call the change function module
      LOOP AT GT_PRCTR INTO GS_PRCTR.
        GS_PRCTR_DATA-PRCTR = GS_PRCTR-PRCTR.
        GS_PRCTR_DATA-KOKRS = P_KOKRS.
        GS_PRCTR_DATA-KHINR = P_GROUP.
        GS_PRCTR_DATA-DATAB = GS_PRCTR-DATBI.
        GS_PRCTR_DATA-DATBI = GS_PRCTR-DATBI.
        CLEAR GS_BAPIRET2.
        CALL FUNCTION 'PROFITCENTER_CHANGE'
             EXPORTING
                  PRCTR_DATA                 = GS_PRCTR_DATA  "
                  PRCTR_DATAX                = GS_PRCTR_DATAX  "empty
                  NO_CCODES_CHECK            = P_NO_CCC
                  COMPLETE                   = ' '
                  INACTIVE_VERSION           = 'X'
                  TESTRUN                    = ' '
                  INSERT_MODE                = ' '
             IMPORTING
                  RETURN                     = GS_BAPIRET2
             TABLES
                  COMPANYCODE_JOINT_VENTURE  = GT_PRCT1_BUKRS
                  COMPANYCODE_JOINT_VENTUREX = GT_PRCT1_BUKRSX.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  WAIT   = '2'
             IMPORTING
                  RETURN = GS_BAPIRET1.
        GS_MSG-MSGTY = GS_BAPIRET2-TYPE.
        GS_MSG-MSGID = GS_BAPIRET2-ID.
        GS_MSG-MSGNO = GS_BAPIRET2-NUMBER.
        GS_MSG-MSGV1 = GS_BAPIRET2-MESSAGE_V1.
        GS_MSG-MSGV2 = GS_BAPIRET2-MESSAGE_V2.
        GS_MSG-MSGV3 = GS_BAPIRET2-MESSAGE_V3.
        GS_MSG-MSGV4 = GS_BAPIRET2-MESSAGE_V4.
        GS_CONTEXT-CO_AREA = P_KOKRS.
        GS_CONTEXT-PROFIT_CTR = GS_PRCTR-PRCTR.
        GS_MSG-CONTEXT-TABNAME = 'BAPI0015ID2'.
        GS_MSG-CONTEXT-VALUE = GS_CONTEXT.
        CALL FUNCTION 'BAL_LOG_MSG_ADD'
             EXPORTING
                  I_LOG_HANDLE = GD_LOG_HANDLE
                  I_S_MSG      = GS_MSG
             EXCEPTIONS
                  OTHERS       = 1.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDLOOP.
    get display profile
      CALL FUNCTION 'BAL_DSP_PROFILE_NO_TREE_GET'
           IMPORTING
                E_S_DISPLAY_PROFILE = GS_DISPLAY_PROFILE
           EXCEPTIONS
                OTHERS              = 1.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    use grid for display if wanted
    gs_display_profile-use_grid = 'X'.
    set report to allow saving of variants
      GS_DISPLAY_PROFILE-DISVARIANT-REPORT = SY-REPID.
    when you use also other ALV lists in your report,
    please specify a handle to distinguish between the display
    variants of these different lists, e.g:
      GS_DISPLAY_PROFILE-DISVARIANT-HANDLE = 'LOG'.
    set header for display
      IF P_TEST = 'X'.
        CONCATENATE TEXT-001 TEXT-002 INTO GS_DISPLAY_PROFILE-TITLE.
      ELSE.
        GS_DISPLAY_PROFILE-TITLE = TEXT-001.
      ENDIF.
    display the message's context as well: prctr, controllingarea
      GS_FCAT-REF_TABLE = 'BAPI0015ID2'.
      GS_FCAT-REF_FIELD = 'CO_AREA'.
      APPEND GS_FCAT TO GS_DISPLAY_PROFILE-MESS_FCAT.
      GS_FCAT-REF_TABLE = 'BAPI0015ID2'.
      GS_FCAT-REF_FIELD = 'PROFIT_CTR'.
      APPEND GS_FCAT TO GS_DISPLAY_PROFILE-MESS_FCAT.
    call display function module
      CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
           EXPORTING
                I_S_DISPLAY_PROFILE = GS_DISPLAY_PROFILE
           EXCEPTIONS
                OTHERS              = 1.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *&      Form  get_prctr_and_bukrs
          text
         -->P_LT_BUKRS  text
         -->P_LT_PRCTR  text
    FORM GET_PRCTR_AND_BUKRS TABLES PT_BUKRS
                                    PT_PRCTR.
      DATA: LD_BUKRS           TYPE BUKRS,
            BEGIN OF LS_PRCTR,
              PRCTR TYPE PRCTR,
              DATBI TYPE DATBI,
            END OF LS_PRCTR,
            LT_PRCTR           LIKE TABLE OF LS_PRCTR WITH KEY PRCTR,
            LD_GROUPNAME       TYPE SETHIER_CO-GROUPNAME,
            LT_SETHIER         TYPE TABLE OF SETHIER_CO,
            LT_SETVAL          TYPE TABLE OF SETVAL_CO,
            LS_SETVAL          TYPE SETVAL_CO,
            LD_PACKAGE_SIZE    TYPE I VALUE '500',
            SO2_PRCTR          TYPE RANGE OF PRCTR,
            LD_NUM             TYPE I,
            LS_BAPIRET2        TYPE BAPIRET2.
    general authority check for display (change authority is checked
    in 'profitcenter_change')
      AUTHORITY-CHECK OBJECT 'K_PCAS_PRC'
               ID 'KOKRS' FIELD P_KOKRS
               ID 'ACTVT' FIELD '03'.
      IF SY-SUBRC <> 0.
        MESSAGE E741(KH) WITH P_KOKRS.
      ENDIF.
    selection part
      IF NOT P_GROUP IS INITIAL.
        LD_GROUPNAME = P_GROUP.
        CALL FUNCTION 'K_GROUP_REMOTE_READ'
          EXPORTING
            SETCLASS         = '0106'
            CO_AREA          = P_KOKRS
        CHRT_ACCTS       =
            GROUPNAME        = LD_GROUPNAME
        LANGUAGE         =
      IMPORTING
        RETURN           =
          TABLES
            ET_SETHIER       = LT_SETHIER
            ET_SETVAL        = LT_SETVAL.
        IF LS_BAPIRET2-TYPE CA 'AEW'.
          MESSAGE ID     LS_BAPIRET2-ID
                  TYPE   'E'
                  NUMBER LS_BAPIRET2-NUMBER
                  WITH   LS_BAPIRET2-MESSAGE_V1
                         LS_BAPIRET2-MESSAGE_V2
                         LS_BAPIRET2-MESSAGE_V3
                         LS_BAPIRET2-MESSAGE_V4.
        ENDIF.
        LOOP AT LT_SETVAL INTO LS_SETVAL.
          SO_PRCTR-SIGN   = 'I'.
          SO_PRCTR-OPTION = 'BT'.
          SO_PRCTR-LOW    = LS_SETVAL-VALFROM.
          SO_PRCTR-HIGH   = LS_SETVAL-VALTO.
          APPEND SO_PRCTR.
        ENDLOOP.
      ENDIF.
    transform select options into internal tables
      SELECT BUKRS FROM TKA02 INTO TABLE PT_BUKRS[]
        WHERE KOKRS = P_KOKRS
          AND BUKRS IN SO_BUKRS.
    read by package
      LOOP AT SO_PRCTR.
        IF LD_NUM = LD_PACKAGE_SIZE.
          SELECT PRCTR DATBI FROM CEPC INTO TABLE LT_PRCTR
            WHERE KOKRS = P_KOKRS
              AND PRCTR IN SO2_PRCTR.
          CLEAR: LD_NUM, SO2_PRCTR.
          REFRESH SO2_PRCTR.
        ENDIF.
        APPEND SO_PRCTR TO SO2_PRCTR.
        LD_NUM = LD_NUM + 1.
      ENDLOOP.
    last package
      SELECT PRCTR DATBI FROM CEPC INTO TABLE LT_PRCTR
        WHERE KOKRS = P_KOKRS
          AND PRCTR IN SO2_PRCTR.
      SORT LT_PRCTR.
      DELETE ADJACENT DUPLICATES FROM LT_PRCTR.
      LOOP AT LT_PRCTR INTO LS_PRCTR.
      authority check for profitcenters
        CALL FUNCTION 'K_PCA_RESP_AUTHORITY_CHECK'
             EXPORTING
                  I_KOKRS             = P_KOKRS
                  I_PRCTR             = LS_PRCTR-PRCTR
                  I_VORGN             = 'STDT'  "Master Data
                  I_ACTVT             = '03'
                  I_NO_DIALOG_MESSAGE = 'X'  "note 447948
             EXCEPTIONS
                  NO_AUTHORITY        = 1
                  DATA_MISSING        = 2
                  OTHERS              = 3.
        CASE SY-SUBRC.
          WHEN 0.
          WHEN 1.
         authority error
            MESSAGE ID SY-MSGID TYPE 'E' NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          WHEN OTHERS.
         stop
            MESSAGE ID SY-MSGID TYPE 'A' NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDCASE.
      ENDLOOP.
      PT_PRCTR[] = LT_PRCTR[].
    ENDFORM.                               " get_prctr_and_bukrs
    *&      Form  GET_JV_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM GET_JV_DATA.
      CALL FUNCTION 'WS_UPLOAD'
           EXPORTING
                FILENAME                = P_FILE
                FILETYPE                = 'ASC'
           TABLES
                DATA_TAB                = GS_JVDAT
           EXCEPTIONS
                CONVERSION_ERROR        = 1
                FILE_OPEN_ERROR         = 2
                FILE_READ_ERROR         = 3
                INVALID_TYPE            = 4
                NO_BATCH                = 5
                UNKNOWN_ERROR           = 6
                INVALID_TABLE_WIDTH     = 7
                GUI_REFUSE_FILETRANSFER = 8
                CUSTOMER_ERROR          = 9
                OTHERS                  = 10.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " GET_JV_DATA
    The test file should be in the below format:
    BUKRS, Venture Name, RECID, ETYPE, OTYPE
    0605BL0085CP1  1  
    Thank You,
    Suresh

    Suresh,
    Sometimes there might be a delay in the values getting committed to the database. Did you try and see if the values were updated after some time.
    Ideally if the BAPI has given a success message and you have a commit after that (which in this case you have), it should ideally update the concerned data.
    Regards,
    Ravi

  • Satellite A500 - Blue screen - critical errors - reboots!

    This laptop is driving me mad, why did I ever get rid of my other notebook??
    This machine caught my eye, it looks fab, but performance wise it is extremely poor - blue screens and reboots all the time, with critical errors - I've had enough!! Only bought it on 7th Jan this year, and it has done this ever since new, it has to go back!
    And by looking at the posts on this forum the problem appears prevalent, and none of the experts seem to have an answer?? Should I reallybe having to upgrade the Bios and drivers and searching for solutions to try and resolve the many issues with this machine???
    I'm gonna get a refund and buy something reliable, sorry Toshiba but I can't endorse this machine, it has caused me nothing but grief!
    Very upset, especially as this was a gift 8-(

    *This is what happened 5 mins ago, switched machine on checked emails was saving a picture of my new grandson from one of the emails, blue screenedbelow*
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 2057
    Additional information about the problem:
    BCCode: 50
    BCP1: FFFFF88007F8B848
    BCP2: 0000000000000001
    BCP3: FFFFF88008D4E624
    BCP4: 0000000000000000
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1
    Device driver software was not successfully installed
    Base System device XDevice unplugged
    Base System device XDevice unplugged
    Base System device XDevice unplugged
    *Message in toshiba forum that there is a problem with Nvidia graphics - which I have up dated before, but as I keep being restored to earlier versions, the updates are all over the place, I update, machine blue screens updates gone? Update again......and so it goes on....*
    *Windows automatic updates is switched on, but everytime Windows does an update this machine crashes and has to install to an earlier time so Im back to square one.........*
    *It would be comical if this was a cheap machine!*

  • Backup causing Memory Critical error

    I have noticed that my Phone has been rebooting on me every night for the past week or so. I have no idea what is causing it, but I tried to put it into Airplane mode for the last few nights to see if that would fix the problem. Well, it didn't reboot on me, but once I turn off airplane mode, the phone would freeze on me and i would have to perform a hard reboot.  I am not sure exactly what is happening, but I then loaded up the Backup app and found another issue...
    It seems like my Palm Profile backup app is causing some major memory errors. Every time I try to run backup, I get "memory critical" errors that freezes my device and I have to do a forced reboot. I have even tried to doctor my phone and it doesn't seem to help.
    I can try to send along any log files as needed, but any idea why the backup app would be causing these errors?
    Adam
    Post relates to: Pre p100eww (Sprint)

    Hello,
    It appears I've been experiencing the same issue.  I noticed I was randomly getting critical memory issues with no apps open.  I couldn't figure out what was causing it.  Through this, the phone gets quite hot and then just freezes on whatever screen it is on.
    Is this due to the recent server authentication changes that HP announced regarding webOS devices?  It's causing my phone to crash pretty regularly in the morning and it's very inconvenient.
    Thanks!
    Chris
    EDIT: Just saw my automatically-assigned avatar.  Apparently I'm a kitten head...  LOL

  • A critical error has occured. Processing of the service had to be terminate

    When manager wants to approve the employee leave request its giving following error.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE   
      Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1020)
         at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
         at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
         at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
         at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
         at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
         at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
         at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
         at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
         at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
         at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
         at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 47 more
       kindly help ASAP,

    Hi,
    Did you give enough authorizations to the user at the beack end.
    Just Try giving SAP_ALL authorizations and check.
    Regards,
    Santhosh

  • Error while migrating reports from XI3.1 to BI4.0

    Hi,
               I have converted deski report into webi report using report conversion tool and i am trying to migrate the converted report from XI 3.1 to BI 4.0. I am getting 'Error:INF' while doing this. how to overcome this error while migration ?. any suggestions..
    Regards,
    Shanthakumar.

    Hi,
    could you please provice a little more information. Can you view the converted Reports in your XI 3.1 Environment? Are you trying to view the Reports as administrator in your BI4 Environment?
    Regards
    -Seb.

Maybe you are looking for

  • Games and purchases won't sync after upgrade to itunes 8.1.1.10

    Hi, I've just upgraded to itunes 8.1.1.10 (because itunes asked it when I started it up), but since then it has been behaving rather strangely. First, itunes claims my computer is no longer autorised. However, when I try to re-autorise him, I just re

  • How can I find and change my WEP password?

    I just purchased a bluray player and it asks for my Airport WEP key to access the network I set up. I forgot what WEP was and how to locate it....

  • Solman 4.0 Linux Oracle Install - Label Problem

    Hi All, I'm trying to install SOLMAN 4.0 on Linux x86_64 with Oracle. I have selected a UNICODE install, but when it comes time to specify the media location I get a message stating that it found label.... SAP:AKK:700:UKERNEL: <etc> but that it needs

  • ADF code is exposed to the customer !!!!!

    Hello, I have a problem but don't really know if anyone has a solution to it, here it is. I'm developing a web application using ADF 11g and weblogic 10.3, my application is composed from multiple modules (sales, inventory, hr, etc.). I have customer

  • What exactly means java.lang.reflect.InvocationTargetException

    from java docs: InvocationTargetException is a checked exception that wraps an exception thrown by an invoked method or constructor.