Very Critical!!!! Please!! Please!! help me on this
Hi
This is very critical, please give me a solution... if you want i will send you the whole code of the program.
Below is the code of the program:
read a message short and long text using the BAPI *
BAPI_MESSAGE_GETDETAIL of the object BapiService. *
REPORT ZSRJVBAPI.
TYPES: BEGIN OF TY_PRCTR_KEY,
PRCTR TYPE PRCTR,
DATBI TYPE DATBI,
END OF TY_PRCTR_KEY.
TYPES: TY_T_PRCTR_KEY TYPE TABLE OF TY_PRCTR_KEY WITH KEY PRCTR,
TY_T_BUKRS TYPE TABLE OF BUKRS.
Data declaration
DATA: GT_PRCT1_BUKRS TYPE TABLE OF PRCT1_BUKRS,
GS_PRCT1_BUKRS TYPE PRCT1_BUKRS,
GT_PRCT1_BUKRSX TYPE TABLE OF PRCT1_BUKRSX,
GS_PRCT1_BUKRSX TYPE PRCT1_BUKRSX,
GT_BUKRS TYPE TY_T_BUKRS,
GD_BUKRS TYPE BUKRS,
GS_TESTRUN TYPE BAPI0015_9,
GS_PRCTR_DATA TYPE PRCT1,
GS_PRCTR_DATAX TYPE PRCT1X,
GD_PRCTR TYPE PRCTR,
GS_TKA01 TYPE TKA01,
GS_PRCTR TYPE TY_PRCTR_KEY,
GT_PRCTR TYPE TY_T_PRCTR_KEY,
GS_BAPIRET1 TYPE BAPIRET2,
GS_BAPIRET2 TYPE BAPIRET2,
GD_LOG_HANDLE TYPE BALLOGHNDL,
GS_LOG TYPE BAL_S_LOG,
GS_MSG TYPE BAL_S_MSG,
GS_CONTEXT TYPE BAPI0015ID2,
GS_DISPLAY_PROFILE TYPE BAL_S_PROF,
GS_FCAT TYPE BAL_S_FCAT.
DATA: BEGIN OF GS_JVDAT OCCURS 0.
DATA: BUKRS LIKE GD_BUKRS.
INCLUDE STRUCTURE GJV_DATA.
DATA: END OF GS_JVDAT.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME.
PARAMETERS: P_KOKRS TYPE PRCT1-KOKRS VALUE CHECK OBLIGATORY,
P_GROUP TYPE PRCT1-KHINR.
SELECT-OPTIONS: SO_PRCTR FOR GD_PRCTR.
SELECT-OPTIONS: SO_BUKRS FOR GD_BUKRS.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK MARK WITH FRAME.
*PARAMETERS: P_ASSIGN
TYPE PRCT1_BUKRS-ASSIGN_TO_PRCTR RADIOBUTTON GROUP MARK,
P_DISPLY
TYPE PRCT1_BUKRS-ASSIGN_TO_PRCTR RADIOBUTTON GROUP MARK.
PARAMETERS: P_TEST TYPE TESTRUN DEFAULT ' ',
P_NO_CCC TYPE BOOLE_D DEFAULT SPACE NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK MARK.
SELECTION-SCREEN BEGIN OF BLOCK FILE WITH FRAME.
PARAMETERS: P_FILE TYPE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK FILE.
INITIALIZATION.
GET PARAMETER ID 'CAC' FIELD P_KOKRS.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_GROUP.
SELECT SINGLE * FROM TKA01 INTO GS_TKA01 WHERE KOKRS = P_KOKRS.
authority check for groups
AUTHORITY-CHECK OBJECT 'K_PCAP_SET'
ID 'KOKRS' FIELD P_KOKRS
ID 'ACTVT' FIELD '03'.
IF SY-SUBRC <> 0.
MESSAGE E734(KH) WITH P_KOKRS.
ENDIF.
PERFORM SET_HELP IN PROGRAM SAPMKEC1
USING 'CEPC '
'KHINR '
GS_TKA01-PHINR
GS_TKA01-KOKRS
SPACE
CHANGING P_GROUP.
IF P_GROUP IS INITIAL AND SO_PRCTR[] IS INITIAL.
MESSAGE W013(Z5).
SET SCREEN SY-DYNNR.
LEAVE SCREEN.
ENDIF.
IF NOT SO_PRCTR IS INITIAL.
IF SO_PRCTR-LOW = '0000000000' AND
SO_PRCTR-HIGH = '9999999999'.
MESSAGE W011(Z5).
ENDIF.
ENDIF.
IF NOT P_GROUP IS INITIAL AND
P_GROUP = 'AMOCO_HIER'.
MESSAGE W014(Z5).
ENDIF.
IF NOT P_GROUP IS INITIAL AND NOT SO_PRCTR[] IS INITIAL.
MESSAGE E051(KM).
ENDIF.
START-OF-SELECTION.
PERFORM GET_PRCTR_AND_BUKRS TABLES GT_BUKRS
GT_PRCTR.
PERFORM GET_JV_DATA.
*END-OF-SELECTION.
build up the call table for companycodes
LOOP AT GT_BUKRS INTO GD_BUKRS.
LOOP AT GS_JVDAT WHERE BUKRS = GD_BUKRS.
GS_PRCT1_BUKRS-COMP_CODE = GD_BUKRS.
GS_PRCT1_BUKRS-ASSIGN_TO_PRCTR = 'X'.
GS_PRCT1_BUKRS-VNAME = GS_JVDAT-VNAME.
GS_PRCT1_BUKRS-RECID = GS_JVDAT-RECID.
GS_PRCT1_BUKRS-ETYPE = GS_JVDAT-ETYPE.
GS_PRCT1_BUKRS-JV_OTYPE = GS_JVDAT-OTYPE.
GS_PRCT1_BUKRS-JV_JIBCL = GS_JVDAT-JIBCL.
GS_PRCT1_BUKRS-JV_JIBSA = GS_JVDAT-JIBSA.
APPEND GS_PRCT1_BUKRS TO GT_PRCT1_BUKRS.
prepare xbar for function call
GS_PRCT1_BUKRSX-COMP_CODE = GD_BUKRS.
GS_PRCT1_BUKRSX-ASSIGN_TO_PRCTR = 'X'. "relevant for change
GS_PRCT1_BUKRSX-VNAME = 'X'.
GS_PRCT1_BUKRSX-RECID = 'X'.
GS_PRCT1_BUKRSX-ETYPE = 'X'.
GS_PRCT1_BUKRSX-JV_OTYPE = 'X'.
GS_PRCT1_BUKRSX-JV_JIBCL = 'X'.
GS_PRCT1_BUKRSX-JV_JIBSA = 'X'.
APPEND GS_PRCT1_BUKRSX TO GT_PRCT1_BUKRSX.
ENDLOOP.
ENDLOOP.
create an initial log file
GS_LOG-EXTNUMBER =
'Ergebnisse der Buchungskreisänderung'(001).
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
I_S_LOG = GS_LOG
IMPORTING
E_LOG_HANDLE = GD_LOG_HANDLE
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GS_TESTRUN-TESTRUN = P_TEST.
call the change function module
LOOP AT GT_PRCTR INTO GS_PRCTR.
GS_PRCTR_DATA-PRCTR = GS_PRCTR-PRCTR.
GS_PRCTR_DATA-KOKRS = P_KOKRS.
GS_PRCTR_DATA-KHINR = P_GROUP.
GS_PRCTR_DATA-DATAB = GS_PRCTR-DATBI.
GS_PRCTR_DATA-DATBI = GS_PRCTR-DATBI.
CLEAR GS_BAPIRET2.
CALL FUNCTION 'PROFITCENTER_CHANGE'
EXPORTING
PRCTR_DATA = GS_PRCTR_DATA "
PRCTR_DATAX = GS_PRCTR_DATAX "empty
NO_CCODES_CHECK = P_NO_CCC
COMPLETE = ' '
INACTIVE_VERSION = 'X'
TESTRUN = ' '
INSERT_MODE = ' '
IMPORTING
RETURN = GS_BAPIRET2
TABLES
COMPANYCODE_JOINT_VENTURE = GT_PRCT1_BUKRS
COMPANYCODE_JOINT_VENTUREX = GT_PRCT1_BUKRSX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = '2'
IMPORTING
RETURN = GS_BAPIRET1.
GS_MSG-MSGTY = GS_BAPIRET2-TYPE.
GS_MSG-MSGID = GS_BAPIRET2-ID.
GS_MSG-MSGNO = GS_BAPIRET2-NUMBER.
GS_MSG-MSGV1 = GS_BAPIRET2-MESSAGE_V1.
GS_MSG-MSGV2 = GS_BAPIRET2-MESSAGE_V2.
GS_MSG-MSGV3 = GS_BAPIRET2-MESSAGE_V3.
GS_MSG-MSGV4 = GS_BAPIRET2-MESSAGE_V4.
GS_CONTEXT-CO_AREA = P_KOKRS.
GS_CONTEXT-PROFIT_CTR = GS_PRCTR-PRCTR.
GS_MSG-CONTEXT-TABNAME = 'BAPI0015ID2'.
GS_MSG-CONTEXT-VALUE = GS_CONTEXT.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
I_LOG_HANDLE = GD_LOG_HANDLE
I_S_MSG = GS_MSG
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
get display profile
CALL FUNCTION 'BAL_DSP_PROFILE_NO_TREE_GET'
IMPORTING
E_S_DISPLAY_PROFILE = GS_DISPLAY_PROFILE
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
use grid for display if wanted
gs_display_profile-use_grid = 'X'.
set report to allow saving of variants
GS_DISPLAY_PROFILE-DISVARIANT-REPORT = SY-REPID.
when you use also other ALV lists in your report,
please specify a handle to distinguish between the display
variants of these different lists, e.g:
GS_DISPLAY_PROFILE-DISVARIANT-HANDLE = 'LOG'.
set header for display
IF P_TEST = 'X'.
CONCATENATE TEXT-001 TEXT-002 INTO GS_DISPLAY_PROFILE-TITLE.
ELSE.
GS_DISPLAY_PROFILE-TITLE = TEXT-001.
ENDIF.
display the message's context as well: prctr, controllingarea
GS_FCAT-REF_TABLE = 'BAPI0015ID2'.
GS_FCAT-REF_FIELD = 'CO_AREA'.
APPEND GS_FCAT TO GS_DISPLAY_PROFILE-MESS_FCAT.
GS_FCAT-REF_TABLE = 'BAPI0015ID2'.
GS_FCAT-REF_FIELD = 'PROFIT_CTR'.
APPEND GS_FCAT TO GS_DISPLAY_PROFILE-MESS_FCAT.
call display function module
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXPORTING
I_S_DISPLAY_PROFILE = GS_DISPLAY_PROFILE
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form get_prctr_and_bukrs
text
-->P_LT_BUKRS text
-->P_LT_PRCTR text
FORM GET_PRCTR_AND_BUKRS TABLES PT_BUKRS
PT_PRCTR.
DATA: LD_BUKRS TYPE BUKRS,
BEGIN OF LS_PRCTR,
PRCTR TYPE PRCTR,
DATBI TYPE DATBI,
END OF LS_PRCTR,
LT_PRCTR LIKE TABLE OF LS_PRCTR WITH KEY PRCTR,
LD_GROUPNAME TYPE SETHIER_CO-GROUPNAME,
LT_SETHIER TYPE TABLE OF SETHIER_CO,
LT_SETVAL TYPE TABLE OF SETVAL_CO,
LS_SETVAL TYPE SETVAL_CO,
LD_PACKAGE_SIZE TYPE I VALUE '500',
SO2_PRCTR TYPE RANGE OF PRCTR,
LD_NUM TYPE I,
LS_BAPIRET2 TYPE BAPIRET2.
general authority check for display (change authority is checked
in 'profitcenter_change')
AUTHORITY-CHECK OBJECT 'K_PCAS_PRC'
ID 'KOKRS' FIELD P_KOKRS
ID 'ACTVT' FIELD '03'.
IF SY-SUBRC <> 0.
MESSAGE E741(KH) WITH P_KOKRS.
ENDIF.
selection part
IF NOT P_GROUP IS INITIAL.
LD_GROUPNAME = P_GROUP.
CALL FUNCTION 'K_GROUP_REMOTE_READ'
EXPORTING
SETCLASS = '0106'
CO_AREA = P_KOKRS
CHRT_ACCTS =
GROUPNAME = LD_GROUPNAME
LANGUAGE =
IMPORTING
RETURN =
TABLES
ET_SETHIER = LT_SETHIER
ET_SETVAL = LT_SETVAL.
IF LS_BAPIRET2-TYPE CA 'AEW'.
MESSAGE ID LS_BAPIRET2-ID
TYPE 'E'
NUMBER LS_BAPIRET2-NUMBER
WITH LS_BAPIRET2-MESSAGE_V1
LS_BAPIRET2-MESSAGE_V2
LS_BAPIRET2-MESSAGE_V3
LS_BAPIRET2-MESSAGE_V4.
ENDIF.
LOOP AT LT_SETVAL INTO LS_SETVAL.
SO_PRCTR-SIGN = 'I'.
SO_PRCTR-OPTION = 'BT'.
SO_PRCTR-LOW = LS_SETVAL-VALFROM.
SO_PRCTR-HIGH = LS_SETVAL-VALTO.
APPEND SO_PRCTR.
ENDLOOP.
ENDIF.
transform select options into internal tables
SELECT BUKRS FROM TKA02 INTO TABLE PT_BUKRS[]
WHERE KOKRS = P_KOKRS
AND BUKRS IN SO_BUKRS.
read by package
LOOP AT SO_PRCTR.
IF LD_NUM = LD_PACKAGE_SIZE.
SELECT PRCTR DATBI FROM CEPC INTO TABLE LT_PRCTR
WHERE KOKRS = P_KOKRS
AND PRCTR IN SO2_PRCTR.
CLEAR: LD_NUM, SO2_PRCTR.
REFRESH SO2_PRCTR.
ENDIF.
APPEND SO_PRCTR TO SO2_PRCTR.
LD_NUM = LD_NUM + 1.
ENDLOOP.
last package
SELECT PRCTR DATBI FROM CEPC INTO TABLE LT_PRCTR
WHERE KOKRS = P_KOKRS
AND PRCTR IN SO2_PRCTR.
SORT LT_PRCTR.
DELETE ADJACENT DUPLICATES FROM LT_PRCTR.
LOOP AT LT_PRCTR INTO LS_PRCTR.
authority check for profitcenters
CALL FUNCTION 'K_PCA_RESP_AUTHORITY_CHECK'
EXPORTING
I_KOKRS = P_KOKRS
I_PRCTR = LS_PRCTR-PRCTR
I_VORGN = 'STDT' "Master Data
I_ACTVT = '03'
I_NO_DIALOG_MESSAGE = 'X' "note 447948
EXCEPTIONS
NO_AUTHORITY = 1
DATA_MISSING = 2
OTHERS = 3.
CASE SY-SUBRC.
WHEN 0.
WHEN 1.
authority error
MESSAGE ID SY-MSGID TYPE 'E' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
WHEN OTHERS.
stop
MESSAGE ID SY-MSGID TYPE 'A' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDCASE.
ENDLOOP.
PT_PRCTR[] = LT_PRCTR[].
ENDFORM. " get_prctr_and_bukrs
*& Form GET_JV_DATA
text
--> p1 text
<-- p2 text
FORM GET_JV_DATA.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_FILE
FILETYPE = 'ASC'
TABLES
DATA_TAB = GS_JVDAT
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_JV_DATA
The test file should be in the below format:
BUKRS, Venture Name, RECID, ETYPE, OTYPE
0605BL0085CP1 1
Thank You,
Suresh
Suresh,
Sometimes there might be a delay in the values getting committed to the database. Did you try and see if the values were updated after some time.
Ideally if the BAPI has given a success message and you have a commit after that (which in this case you have), it should ideally update the concerned data.
Regards,
Ravi
Similar Messages
-
Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.
Hi all ,
Very Urgent, Please Help me on this issue.
when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
SelvamIs your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.
-
SoundFonts - small problem. Please help me because this is very important to
Hello everyone. I have just upgraded from a SoundBlaster Audigy, to a SoundBlaster X-Fi Music edition.
I have a collection of soundfonts which I used to use on my Audigy. They worked fine. Now that I'm using the X-Fi, they all work well, apart from one, and the one that doesn't work is my most used, most important soundfont.
Description of problem:
When I run my midi file, it starts playing the music using the new soundfont, but after about 0 seconds or so, the sound stops - even though the music is still playing. I then can occasionally hear a note or two, but its no longer playing properly. All my other soundfonts work perfectly, so I really dont understand why this one would cause troubles. They are all .SF2 files.
Other Information:
) I am using "SoundFont Bank Manager" to load the soundfonts. They all work great apart from the main one I want to use. It worked fine on my Audigy. The Cache part says 7.3mb Used/ 229.8mb Free.
2) I am on Windows XP Professional - Service pack 2.
3) The rest of my computer is very powerful. Its a core2duo, 2gig of RAM, 320gig seagate barracuda hard dri've etc. Regularly defragged.
4) I have the latest soundcard drivers (And direct X, video drivers, bios drivers, etc.).
5) I have no other problems with the computer.
6) My Midi program is Guitar Pro, which plays special midi files. It is set up properly, and it plays everything perfectly - using all my soundfonts, except the one I most want to use..
Please help me get this working. It is very important to me, and I need to get it working as soon as possible. I'll keep searching this thread incase I need to give any more information.
Thanks in advance.Message Edited by acrobat on 02-09-200705:0 AMWhy do you have two threads dealing with the exact same issue. That makes it confusing and hard to follow your issue to help you.
Who is your carrier, I asked in the other thread?
Have you tried YOUR sim card in another device, what happens?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
IOS 7 very slow, i have many problem , exemple download documents , typing doc to go . Very slow, sometime no response , please help us for this error,
spacepilot wrote:
i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with a firmer grasp of english that the normal call centre staff
welcome to the forum why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
My iPad 1 doesn't stay logged on. It stays @ 3 seconds.this has been happening for a week s I deleted that app, & downloaded another, same one & STILL won't stay opened on page. Please help me figure this out. Very much appreciated. Thank you, Connie Sypriano
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
Please help me with this etrecheck report!
Please help me understand this report.
Note: I've noticed that it has taken me longer to login after installing Yosemite. My computer has frozen a few times already and has shut itself down once or twice..also I have this annoying pop-up "To view this content, you need to install the Java Runtime Environment" which I've figured is from a Facebook videochat that I can't remove.. I appreciate your help. Thank You.
EtreCheck version: 2.0.11 (98)
Report generated December 2, 2014 at 2:09:52 PM EST
Hardware Information: ℹ️
MacBook Pro (Retina, 13-inch, Late 2012) (Verified)
MacBook Pro - model: MacBookPro10,2
1 2.5 GHz Intel Core i5 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD spdisplays_2880x1800Retina
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:19:19
Disk Information: ℹ️
APPLE SSD SM128E disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 120.11 GB (65.53 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/Library/Extensions
[loaded] com.symantec.kext.ndcengine (1.0f2 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
Launch Agents: ℹ️
[invalid?] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
User Launch Agents: ℹ️
[failed] com.facebook.videochat.[redacted].plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
GrowlHelperApp Application (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
Guidance Application (/Applications/Guidance.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Growl Support
Java Support
Shades Preferences Support
Symantec QuickMenu Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% Safari
3% WindowServer
2% hidd
0% fontd
0% com.apple.WebKit.WebContent
Top Processes by Memory: ℹ️
421 MB Safari
326 MB SymDaemon
198 MB com.apple.WebKit.WebContent
112 MB mds_stores
112 MB WindowServer
Virtual Memory Information: ℹ️
1.43 GB Free RAM
4.93 GB Active RAM
1.21 GB Inactive RAM
1.01 GB Wired RAM
1.16 GB Page-ins
49 KB Page-outsHi
Pls could you help me with my imac which is running very slowly?
I have included an etrecheck report below.
Thanks,
EtreCheck version: 2.1.8 (121)
Report generated 28 February 2015 10:00:03 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2010) (Technical Specifications)
iMac - model: iMac11,3
1 2.8 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
Empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 10 days 12:7:36
Disk Information: ℹ️
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (782.53 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
EPSON USB Printer
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Click for support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.lookupd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
8 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
9 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.avast.update-agent.plist [Click for support]
[loaded] com.avast.userinit.plist [Click for support]
[running] com.epson.epw.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[failed] .plist (hidden) [Click for support]
/usr/local/libexec/TorchUpdater /usr/local/libexec/TorchUpdater --hello=torch
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.avast.init.plist [Click for support]
[loaded] com.avast.uninstall.plist [Click for support]
[not loaded] com.avast.update.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.avast.home.userinit.plist [Click for support]
[loaded] com.divx.agent.postinstall.plist [Click for support]
[running] com.google.Chrome.framework.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
Unity Web Player: Version: UnityPlayer version 4.5.2f1 - SDK 10.6 [Click for support]
AdobePDFViewerNPAPI: Version: 10.1.4 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.4 [Click for support]
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 [Click for support]
NPRoblox: Version: Unknown
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.10 [Click for support]
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
DivX [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
2% Google Chrome
1% mds
1% Microsoft Outlook
0% mds_stores
Top Processes by Memory: ℹ️
189 MB Google Chrome
73 MB softwareupdated
73 MB com.avast.daemon
73 MB Google Chrome Helper
69 MB Finder
Virtual Memory Information: ℹ️
37 MB Free RAM
1.45 GB Active RAM
1.44 GB Inactive RAM
707 MB Wired RAM
113.03 GB Page-ins
3.04 GB Page-outs
Diagnostics Information: ℹ️
Feb 26, 2015, 02:15:44 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.iLifeSlideshow.MRXPC MovieServer_2015-02-26-141544_[redacted].crash
Feb 26, 2015, 02:15:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.iLifeSlideshow.MRXPC MovieServer_2015-02-26-141520_[redacted].crash
Feb 26, 2015, 01:55:32 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.iLifeSlideshow.MRXPC MovieServer_2015-02-26-135532_[redacted].crash
Feb 25, 2015, 09:52:47 PM /Users/[redacted]/Library/Logs/DiagnosticReports/accubeatmix_engine_2015-02-25- 215247_[redacted].crash -
Usbs not working very frustrating please help
My usbs have all stopped working for no reason just after i did my last windows update even with a roll back it still says this error in the picture very frustrating i updated bios on my motherboard and downloaded usb drives but still did not fix the issue
please help it says unknown usb device(device descriptor failed)whn i plug hard drives in the usb has power but it wont show up on my pc also happens with my keyboard and mouse even after driver re installs please help.Hi,
For this issue,please let us know the error code.
Meanwhile, I suggest we disable and re-enable the USB controller to check the result.
This lets the controllers recover the USB port from its unresponsive condition.
To disable and re-enable the USB controllers, follow these steps:
1.Press Win+X,and select Device Manager.
2.Expand Universal Serial Bus controllers.
Note You might have to scroll down the list to find this item.
3.Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
4.Repeat step 3 for each USB controller that is listed under Universal Serial Bus controllers.
5.Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
6.Check the USB device to see whether it is working.
Regards,
Kelvin hsu
TechNet Community Support -
Can anyone please help me on this issue "What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d."??
Sir, Thank you very much for your prompt response. I have already done this. But the problem is still persisting. Actually, I want to upgrade my WhattsApp application and as soon as I click the upgrade button in App Store, it asks for the password of previous apple i.d., which I don't have as I have bought this phone from somebody. There is no option for log out or log in. It there any other way out to upgrade the WhatsApp ????
-
Encrypting and Decrypting Data(Its Very Urgent, Please Help.)
Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.VIs this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C. -
I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue
I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again. -
hai all,
There will be no. of frames in my program. i am calling a frame in a java program using jsp based on selection. but it is not displaying that frame properly. its displaying in a very short manner.
its not displaying any textboxes, buttons etc., in my system its displaying but in some systems its working and in some systems its not working when i called using ip. please help me in this.
by
ramki.hai all,
i found when the problem is existing. but i dont how to rectify it.
when i am using java web start its displaying applet or frame in a minimised way can anybody explain how to rectify it. without java web start my program is working well.
by
bvrkii. -
ORA-04062 - very urgent, please help
Error "ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed" appears while refreshing materialized view with DBMS_MVIEW.REFRESH, the configuration is described below, please, any suggestions what cause the problem?
I have the master database:
db_master
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
and replica database:
db_replica
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
the master and replica databases are installed at different hosts
At db_master:
1. I create table TEST
CREATE TABLE TEST (ID NUMBER PRIMARY KEY);
2.Then create materialized view log on TEST
CREATE MATERIALIZED VIEW LOG ON TEST;
At db_replica:
1. create dblink MASTER to db_master
2. create materialized view
CREATE MATERIALIZED VIEW MV_TEST REFRESH FAST AS SELECT * FROM TEST@MASTER
At db_master:
1.Insert some test values to TEST
INSERT INTO TEST VALUES (1);
INSERT INTO TEST VALUES (2);
INSERT INTO TEST VALUES (3);
COMMIT;
At db_replica:
1. call in job (every 10 sec) DBMS_MVIEW.REFRESH(‘MV_TEST’), or manually:
begin
DBMS_MVIEW.REFRESH('MV_TEST');
end;
sometimes (not at every call the below error callstack appears)
17:07:22 ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
17:07:22 ORA-06512: at line 4
Please, help me solve this problem, what cause ORA-04062?Zjawka,
This forum doesn't consist of paid support personell.
Labeling your request as 'very urgent' must be considered rude.
If you would have looked up the error at all in the online documentation,
you would have got:
ORA-04062: %s of string has been changed
Cause: Attempt to execute a stored procedure to serve an RPC stub which specifies a timestamp or signature that is different from the current timestamp/signature of the procedure.
Action: Recompile the caller in order to pick up the new timestamp.
No why do you do take the trouble to dump all in this junk in a volunteer forum, and you can't be bothered to look up the error message?
Sybrand Bakker
Senior Oracle DBA -
i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks
That's not very intuitive
Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password. -
Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??
computerilliterate52 wrote:
hi all, i hope someone is very computer litterate about java that is i have a dell 2400 pc windows xp 2, well since msn isnt downloading anymore java updates we all have to download a compatible one to our computer i use explorer and i can play www.iwin.com online games, yet when i go on to the msn browswer it wont load the games all i see is it just trying to load and load nothing said and nothing done. what could be wrong it works on ie and not msn browser? i have zone alarm, i have avg spyware tester and spyblaster, but i thought it may of kept me from downloading all this yet it worked on IE please help and i dont have flash player either it wont seem to work any and i mean any help is welcome.i tried to change the browser settings and did all that stuff i am on broadband DSL and they dont seem to know they say that isnt there job its msn's so i asked them and they said no it is quest broadband since i am with them i just get the run around i have IE 6.0 ihave java plug in 1.4.2. o3 yet it says not verified, i have java 1.6.o o1 i have java plugin 1.6.0 01 i have that twice ? dont know why. and java envirinmemet i have the right stuff cuz like i said it plays or works on explorer not msn browserer bar. i see no picture's in center of the page as it tries to load it is a blank page any help thank you i have been trying going on 3 weeks now thanksI agree with the other posters; try Firefox. It sounds like a bit of a mess and what you may need is an onsite PC tech to do some maintenance on your PC.
Also, learning to properly use punctuation (particularly periods) might not be a bad idea. As it is, your post was very hard to read.
Good luck! -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support
Maybe you are looking for
-
Multiple Web Applications WLS 7.0
Hi, I am trying to configure multiple web applications on the same WL 7.0 server and am having trouble doing the following. I would like to be able to use the following URLS: Application #1: http://myserver/st/aems - where st/aems maps to the path X:
-
Aperture 3 library from pre Maverick to Maverick
I made a backup from all my files including my Aperture library. After moving to Mavericks (clean install), there is a new Aperture version and I am not able to import my old library getting the message: Library was made with older version of Apertur
-
HT4623 I can't update my iPad A1337
Hi I was using ipad first time and I already created my apple id and I tried it in my IPad but it saying that I want to update to a latest version and I tried in settings but in the update software section it shows I am having a latest version only a
-
NEED HELP! TASK MANAGER GONE WRONG?
Hello, I am stuck in this thing in task manager, I tried rebooting but it doesn't work. I wanna close a background process but I can't. Here is a screenshot of what happened. I can't seem to go anyhwere in the manager. PLEASE HELP! Solved! Go to Solu
-
Hi all, I need to write a function that does the work of the command native2ascii, in order to read a file containing japanese characters and write their representations \uxxxx in another one (without calling native2ascii with exec()). I have written