Very slow printing after upgrading to Mavericks and reinstalling HP s/w for an Officejet 8600?
Before upgrading to Mavericks, my HP 8600s (have 2) would zing at printing. Now they are incredibly slow. I had to do a Restore after my operating system upgrade and after that, the HP folder was not in the Applications Folder. That caused me to reiinstall the HP s/w for the 8600 which I downloaded from the HP website taking care to download and install exactly as was prescribed for the Mavericks scenario. I'm wondering if the problem is that I chose the bonjour versions of each printer when I reinstalled to each printer.
An idea of what I mean by slow is a one and half page letter is taking over 5 minutes to print whereas it used to print at about 30 seconds.
I need some help on this ASAP because my home-office is at a standstill. Many thanks.
Tulsa Lawyer
Hi BerniePiel,
Choosing the Bonjour version means you have chosen the wireless option. Bonjour is a technology that is built into Mac OS and iOS. This technology discovers devices such as printers that are installed on the same network as a Mac or Apple mobile device. Bonjour is the default method for discovering devices on a network.
I can certainly help you with this. When you added the printer, did you add the printer with the 'AirPrint' driver or are you using the HP driver? Us the screenshot below to help you check.
If you do not see AirPrint next to your printer name as shown above, delete the printer and re-add it. When you click the plus symbol you need to choose 'add another printer or scanner', then select your printer and choose the HP driver next to 'Use'.
If the issue persists, or you were already using the HP driver, try the following steps.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OKto confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-clickDisk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the computer
Once these steps have been complete, re-add the printer again, and print. Please let me know if this resolves the issue. If the issue persists I will gladly follow up and continue to work with you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP
Similar Messages
-
Slow MacMini after upgrading to Maverick and later Yosemite.
Gents,
I have had nothing than trouble with my MacMini (late 2009) since i installed Maverick and I hoped some things would improve with Yosemite. That did not happen. I have been through all possible "solutions" but no luck. I hope someone can help me. My MacMini was working like a charm until I installed Maverick.
(PS: My back-up drive is not connected as shown below)
This is my Etrecheck:
Problem description:
MacMini (late 2009) Sluggish after installation Maverick and later Yosemite
EtreCheck version: 2.1.2 (105)
Report generated December 15, 2014 at 7:17:37 PM GMT-2
Hardware Information: ℹ️
Mac mini (Late 2009) (Verified)
Mac mini - model: Macmini3,1
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
SyncMaster 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:5:40
Disk Information: ℹ️
Hitachi HTS543232L9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (67.50 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Elgato Video Capture.app
[not loaded] com.elgato.driver.Pluto2 (1.1) [Support]
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
/System/Library/Extensions
[not loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) [Support]
[not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) [Support]
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) [Support]
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.2 - SDK 10.5) [Support]
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
[invalid?] com.macupdate.desktop5.scanner.plist [Support]
[invalid?] com.yahoo.YahooContactSyncAgent.plist [Support]
User Login Items: ℹ️
Caffeine ApplicationHidden (/Applications/Caffeine.app)
AdobeResourceSynchronizer Application (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
G-Technology Assistant ApplicationHidden (/Applications/G-Technology Assistant.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 6.1 [Support]
Default Browser: Version: 600 - SDK 10.10
OVSHelper: Version: 1.1 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Support]
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 8.0.0 [Support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
Silverlight: Version: 4.0.51204.0 [Support]
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
Google Earth Web Plug-in: Version: 7.0 [Support]
Safari Extensions: ℹ️
ASCPowerTools
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.2
3rd Party Preference Panes: ℹ️
BrowserPlus [Support]
Flash Player [Support]
Perian [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 319.21 GB Disk used: 251.71 GB
Destinations:
MacMini Backup [Local]
Total size: 402.92 GB
Total number of backups: 15
Oldest backup: 2014-10-12 15:52:07 +0000
Last backup: 2014-12-09 00:11:21 +0000
Size of backup disk: Too small
Backup size 402.92 GB < (Disk used 251.71 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% JustCloud
0% launchd
0% AppleSpell
0% SystemUIServer
Top Processes by Memory: ℹ️
137 MB Dock
82 MB CalendarAgent
77 MB Spotlight
73 MB com.apple.internetaccounts
73 MB NotificationCenter
Virtual Memory Information: ℹ️
62 MB Free RAM
1.71 GB Active RAM
1.70 GB Inactive RAM
554 MB Wired RAM
1.16 GB Page-ins
471 KB Page-outs
Diagnostics Information: ℹ️
Dec 15, 2014, 07:12:36 PM Self test - passed
Dec 15, 2014, 10:34:27 AM com.apple.AmbientDisplayAgent_2014-12-15...crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?
Disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT -
I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
Failed to verify the preflight file. It is not signed by Apple.
How to I get past this? I cannot find anything referencing preflight file. Who can identify this?Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL. Log out, log back in, and test. -
Random restarts after upgrading to mavericks and then yosemite
I have a mid 2009 15in mbp. I noticed after upgrading to mavericks that I began to have random restarts and significant hang ups to the point of me having to restart it on my own. I would run disk utility and repair permissions. The mac would run okay for maybe a day or maybe an hour, then restart or hang up. I seem to have a pretty full hard drive and I for some reason thought it may be a failing hard drive. I purchased a new hard drive and restored a time machine backup to the new 1tb drive. I also added 2, 4gb sticks of ram. Things were going swimmingly for a week or so with yosemite installed and then the problems began again. It got to the point that the computer wouldn't even start. I threw my old hard drive back in, reformatted it, and reinstalled a back up. The mac is working now, but with the same kind of random kernel panics. I have done all of the latest software updates as well. I would like to put the other drive back in for shear volume alone, but don't seem to get anywhere when I try. Thank you for your time and consideration. Any help is appreciated. Here is an etrecheck as well.
Problem description:
random shutdowns. have no idea what is causing it?
EtreCheck version: 2.0.11 (98)
Report generated November 28, 2014 at 2:21:31 PM CST
Hardware Information: ℹ️
MacBook Pro (15-inch, 2.53GHz, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,4
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 5:29:56
Disk Information: ℹ️
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 228.35 GB (91.34 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 20.71 GB (2.52 GB free)
MATSHITADVD-R UJ-868
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/AirParrot.app
[not loaded] com.squirrels.airparrot.framebuffer (3 - SDK 10.7) Support
/Library/Application Support/LogMeIn/drivers
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
/Library/Extensions
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.6) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.6) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.6) Support
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.6) Support
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.12 - SDK 10.6) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.16) Support
[not loaded] com.sierrawireless.driver.SierraSwitch (1.2.4) Support
[not loaded] com.sierrawireless.driver.SierraSwitchKicker (1.0.0) Support
[loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) Support
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.12 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.12 - SDK 10.6) Support
Startup Items: ℹ️
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.logmein.LMILaunchAgentFixer.plist Support
[not loaded] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[invalid?] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[not loaded] com.sierrawireless.SWoCTool.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[running] com.amazon.music.plist Support
[loaded] com.divx.agent.postinstall.plist Support
[invalid?] com.ecamm.printopia.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.macpaw.CleanMyMac.helperTool.plist Support
[invalid?] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[invalid?] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.zeobit.MacKeeper.Helper Support
[invalid?] org.virtualbox.vboxwebsrv.plist Support
[invalid?] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Caffeine UNKNOWN (missing value)
Internet Plug-ins: ℹ️
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
GameFacePlugin: Version: GameFacePlugin 1.8.0.1 - SDK 10.5 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
Unity Web Player: Version: UnityPlayer version 4.2.1f4 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 10.1.8 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.2 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.8 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.1.0 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
User Internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 071701000001 Support
3rd Party Preference Panes: ℹ️
DivX Support
Flash Player Support
Perian Support
VLC Streamer Support
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Destinations:
Ryans Backups [Network]
Total size: 3.00 TB
Total number of backups: 24
Oldest backup: 2014-10-28 18:21:13 +0000
Last backup: 2014-11-21 03:56:55 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
18% WindowServer
4% launchd
1% Finder
1% Safari
1% hidd
Top Processes by Memory: ℹ️
189 MB Folder Actions Dispatcher
120 MB Finder
112 MB com.apple.WebKit.WebContent
86 MB mds_stores
86 MB Safari
Virtual Memory Information: ℹ️
4.06 GB Free RAM
2.38 GB Active RAM
1.04 GB Inactive RAM
842 MB Wired RAM
1.84 GB Page-ins
0 B Page-outsHere ya go. How in the **** do I get rid of the cleanmymac stuff, and logmein for that matter. Not sure how I ended up with them but it would be nice to rid my mac of them. Thanks in advance.
Start time: 18:44:49 11/28/14
Model Identifier: MacBookPro5,4
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 4:00
Battery
Condition: Service Battery
SATA
Hitachi HTS545025B9SA02
Diagnostic reports
2014-11-27 mds_stores crash
2014-11-28 Console hang
Log
Nov 28 14:02:02 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:03:13 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:15:28 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:16:32 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:17:36 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:43:05 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 14:45:30 jnl: b(1, 2): replay_journal: from: 5317632 to: 15631872 (joffset 0x6a8000)
Nov 28 14:45:30 jnl: b(1, 2): journal replay done.
Nov 28 14:45:49 com.apple.locationd: Service exited with abnormal code: 1
Nov 28 14:46:49 com.apple.spindump: Service exited with abnormal code: 75
Nov 28 14:47:22 com.logmein.LMILaunchAgentFixer: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:47:22 ws.agile.1PasswordAgent: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:47:22 com.ecamm.printopia: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:49:38 com.macpaw.CleanMyMac.volumeWatcher: Service setup event to handle failure and will not launch until it fires.
Nov 28 14:50:25 process WindowServer[168] caught causing excessive wakeups. Observed wakeups rate (per sec): 174; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45058
Nov 28 17:53:08 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 17:54:35 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 17:55:45 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:14:09 com.macpaw.CleanMyMac.helperTool: Service setup event to handle failure and will not launch until it fires.
Nov 28 18:17:47 com.apple.xpc.launchd.domain.pid.quicklookd.568: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
Nov 28 18:31:23 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:37:49 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:39:01 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:40:12 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
Nov 28 18:40:46 com.macpaw.CleanMyMac.volumeWatcher: Filesystem mount spawn of service failed: 139: Service cannot presently execute
kexts
com.squirrels.driver.AirParrotSpeakers (1.7)
Daemons
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.sierrawireless.SierraReset.plist
com.adobe.SwitchBoard
com.logmein.raupdate
com.adobe.fpsaud
org.macosforge.xquartz.privileged_startx
com.sierrawireless.SierraSWoCMon
Agents
ws.agile.1PasswordAgent
com.logmein.LMILaunchAgentFixer
com.macpaw.CleanMyMac.trashSizeWatcher
com.macpaw.CleanMyMac.volumeWatcher
org.macosforge.xquartz.startx
com.fiplab.MemoryCleanHelper
com.macpaw.CleanMyMac.helperTool
com.divx.agent.postinstall
com.apple.FolderActions.folders
com.ecamm.printopia
com.amazon.music
com.apple.Safari
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.apple.FolderActions.enabled
Startup items
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext
- com.Belcarra.iokit.USBLAN_netpart
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext
- com.Belcarra.iokit.USBLAN_usbpart
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext
- com.RemoteControl.USBLAN.usbpart
/System/Library/Extensions/3.1.1/Belcarra.USBLAN_netpart.kext
- com.Belcarra.iokit.USBLAN_netpart
/System/Library/Extensions/3.1.1/Belcarra.USBLAN_usbpart.kext
- com.Belcarra.iokit.USBLAN_usbpart
/System/Library/Extensions/3.1.1/RemoteControl.USBLAN_usbpart.kext
- com.RemoteControl.USBLAN.usbpart
/System/Library/Extensions/AirParrotDriver.kext
- com.squirrels.driver.AirParrotSpeakers
/System/Library/Extensions/Belcarra.USBLAN_netpart.kext
- com.Belcarra.iokit.USBLAN_netpart
/System/Library/Extensions/Belcarra.USBLAN_usbpart.kext
- com.Belcarra.iokit.USBLAN_usbpart
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/NovatelWireless3G.kext
- com.novatelwireless.driver.3G
/System/Library/Extensions/NovatelWirelessFilter.kext
- com.novatelwireless.driver.DisableAutoInstall
/System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext
- com.RemoteControl.USBLAN.usbpart
/System/Library/Extensions/SierraDevSupport.kext
- com.sierrawireless.driver.SierraDevSupport
/System/Library/Extensions/SierraFSCSupport.kext
- com.sierrawireless.driver.SierraFSCSupport
/System/Library/Extensions/SierraFSRSupport.kext
- com.sierrawireless.driver.SierraFSRSupport
/System/Library/Extensions/SierraHSRSupport.kext
- com.sierrawireless.driver.SierraHSRSupport
/System/Library/Extensions/SierraSupport.kext
- com.sierrawireless.driver.SierraSupport
/System/Library/Extensions/SierraSwitch.kext
- com.sierrawireless.driver.SierraSwitch
/System/Library/Extensions/SierraSwitchKicker.kext
- com.sierrawireless.driver.SierraSwitchKicker
/System/Library/Extensions/ssuddrv.kext
- com.devguru.driver.SamsungComposite
/Library/Audio/Plug-Ins/Components/A52Codec.component
- com.shepmater.A52Codec
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
- com.divx.DivXBrowserPlugin
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/GameFacePlugin.plugin
- com.ElectronicArts.GameFacePlugin
/Library/Internet Plug-Ins/GarminGpsControl.plugin
- com.garmin.GarminGpsControl
/Library/Internet Plug-Ins/iPhotoPhotocast.plugin
- com.apple.plugin.iPhotoPhotocast
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/LogitechHarmony.plugin
- com.logitech.harmony.LogitechHarmony
/Library/Internet Plug-Ins/NP_2020Player_IKEA.plugin
- com.2020technologies.2020Player-IKEA.NP
/Library/Internet Plug-Ins/OVSHelper.plugin
- com.divx.OVSHelper
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/Unity Web Player.plugin
- com.unity.UnityWebPlayer
/Library/PreferencePanes/DivX.prefPane
- com.divx.divxprefs
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Perian.prefPane
- org.perian.PerianPane
/Library/QuickTime/AC3MovieImport.component
- com.cod3r.ac3movieimport
/Library/QuickTime/Perian.component
- org.perian.Perian
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
/Library/Spotlight/GBSpotlightImporter.mdimporter
- com.apple.garageband.spotlightimporter
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/doubleTwistWebPlugin.bundle
- com.doubleTwist.webPlugin
Library/Internet Plug-Ins/Move_Media_Player.plugin
- com.movenetworks.movemediaplayer.plugin
Library/PreferencePanes/VLC Streamer.prefPane
- com.HobbyistSoftware.VLCStreamPrefs
Library/Widgets/countdown.wdgt
- com.pietjonas.hector.AHectorCountdown
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Library/Widgets/iStat Pro.wdgt
- com.iSlayer.iStatpro4.widget
Library/Widgets/SAC.wdgt
- com.mirtchovski.widget.SAC
Library/Widgets/Screenshot Plus.wdgt
- com.stevenchaitoff.screeenshotplus
Library/Widgets/Shutdown.wdgt
- com.TzeenieWheenie.widget.Shutdown
dylibs
/usr/lib/libgutenprint.2.0.3.dylib
Apps
/Applications/Dropbox.app
Contents of /etc/ssh_config (checksum 1281775184)
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /Library/LaunchAgents/com.logmein.LMILaunchAgentFixer.plist (checksum 94065829)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Label</key>
<string>com.logmein.LMILaunchAgentFixer</string>
<key>OnDemand</key>
<true/>
<key>ThrottleInterval</key>
<integer>1</integer>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LMILaunchAgentFixer.app/Contents/MacOS/LMILaunchAgentFixer< /string>
<string>fromlaunchagent</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.logmein.logmeingui.plist (checksum 849719711)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeingui</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeInGUI.app/Contents/MacOS/LogMeInGUI</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagent.plist (checksum 3380781611)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinguiagent</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Resources/LMIGUIAgent.app/Contents/Mac OS/LMIGUIAgent</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ThrottleInterval</key>
<integer>1</integer>
<key>WorkingDirectory</key>
...and 3 more line(s)
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagentatlogin.plist (checksum 1732774279)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>EnableTransactions</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinguiagentatlogin</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Resources/LMIGUIAgent.app/Contents/Mac OS/LMIGUIAgent</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ThrottleInterval</key>
...and 5 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.logmeinblanker.plist (checksum 993864190)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinblanker</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Resources/LMIBlanker.app/Contents/MacO S/LMIBlanker</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>StandardErrorPath</key>
<string>/Library/Logs/LogMeIn/stderr.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/LogMeIn/stdout.log</string>
<key>ThrottleInterval</key>
<integer>0</integer>
<key>WorkingDirectory</key>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.logmeinserver.plist (checksum 2712592844)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinserver</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/MacOS/LogMeIn</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/Library/Logs/LogMeIn/stderr.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/LogMeIn/stdout.log</string>
<key>ThrottleInterval</key>
<integer>1</integer>
<key>WorkingDirectory</key>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.raupdate.plist (checksum 641044797)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.logmein.raupdate</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>KeepAlive</key>
<false/>
<key>LaunchOnlyOnce</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/update/raupdate</string>
<string> /s</string>
</array>
<key>StandardErrorPath</key>
<string>/Library/Application Support/LogMeIn//log/stderr.log</string>
<key>StandardOutPath</key>
<string>/Library/Application Support/LogMeIn//log/stdout.log</string>
<key>WorkingDirectory</key>
<string>/Library/Application Support/LogMeIn//bin/</string>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.sierrawireless.SWoCMon.plist (checksum 2402291866)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>daemon</string>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.sierrawireless.SierraSWoCMon</string>
<key>LaunchOnlyOnce</key>
<false/>
<key>OnDemand</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/Library/Logs/SierraSWoCMon.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/SierraSWoCMon.log</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Extensions/SierraDevSupport.kext/Contents/Resources/Sie rraSWoCMon</string>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.sierrawireless.SWoCTool.plist (checksum 3201758844)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.sierrawireless.SWoCTool</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Sierra/SierraSWoCDaemon</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.sierrawireless.SierraReset.plist (checksum 584977086)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>daemon</string>
<key>Label</key>
<string>com.sierrawireless.SierraReset.plist</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Sierra/SierraReset</string>
</array>
<key>UserName</key>
<string>daemon</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.amazon.music.plist (checksum 3668832669)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.amazon.music</string>
<key>Program</key>
<string>/Applications/Amazon Music.app/Contents/MacOS/Amazon Music Helper</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist (checksum 4289752993)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.FolderActions.folders</string>
<key>Program</key>
<string>/usr/bin/osascript</string>
<key>ProgramArguments</key>
<array>
<string>osascript</string>
<string>-e</string>
<string>tell application "Folder Actions Dispatcher" to tick</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Music/iTunes</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist (checksum 3739816035)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/com.divx.agent.postinstall.plist (checksum 3163907459)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.agent.postinstall</string>
<key>LimitToSessionType</key>
<string>Aqua</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>//Library/Internet Plug-Ins/DivXBrowserPlugin.plugin/Contents/Resources/extensions-installer</stri ng>
<string>install</string>
<string>safari</string>
<string>DivXHTML5</string>
<string>//Library/Internet Plug-Ins/DivXBrowserPlugin.plugin/Contents/Resources/DivXHTML5.safariextz</stri ng>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.ecamm.printopia.plist (checksum 728988905)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.ecamm.printopia</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Users/USER/Library/PreferencePanes/Printopia.prefPane/Contents/MacOS/P rintopia Server.app/Contents/MacOS/Printopia Server</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 170942789)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Font issues: 1
Bad plists
Library/Containers/com.apple.internetaccounts/Data/Library/Application Support/CrashReporter/com.apple.internetaccounts_UUID.plist
User login items
Caffeine
- missing value
Widgets
HP Ink Widget
SAC
Shutdown
iStat Pro
Restricted files: 168
Lockfiles: 178
Elapsed time (s): 2 -
Faces gone after upgrades to Mavericks and iPhoto database.
After upgrading to Mavericks from Mountain Lion, the iPhoto Database had to be upgraded by iPhoto to work with Mavericks. It went thru the process and afterwards many (but not all) of my Faces were gone. The photos are still there...and they're still tagged with the appropriate Faces name, but they will not show up in Faces. The only way I can get them to show up there is to delete the Faces names that are already on the photo and re-enter the Faces from scratch. But since there are at least 1500 photos that are affected, there's got to be a better way! I've done each of the following to no avail:
1) Repaired permissions.
2) Rebuilt Thumbnails.
3) Repaired the Database
4) Rebuilt the Database
5) Restored the Database from Time Machine to pre-Mavericks. The database had to be converted by iPhoto like before. And the results are the same - lots and lots of Faces missing - though everything else appears to be there. The only thing I can see is that it's the same set of years where the Faces are missing (it's something like all Faces from 1942-1970 are missing - but the ones before and after that are there).
Anyone have any ideas? Thanks in advance.Since you've tried all of the standard fixes there's only one left:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
If no change try rebuilding the thumbnails again.
OT -
Issues importing from Canon Rebel T3i after upgrading to Mavericks and Lightroom 5
Hi there,
I just upgraded to Mavericks and Lightroom 5 on a 2008 Macbook Pro.
LR5 is working fine on my photos that have already been imported. However, when I plug in my camera to import new files (RAW and JPEG), the camera does not even mount - aka. does not show up as a possible source at all. I have tried turning off and on, restarting, and using the old LR4 to see if that would solve the problem, but it did not. I also tried importing from the EOS Utility, but that does not recognize the camera as a possible source either. Please HELP!Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Why are both my Mac's so slow now after upgrading to Mavericks?
I have 2 Macs, an MB Pro Core i5, & Mac Mini Mid 2010 Core 2 Duo, (both 4/320's) and both have remained significantly slower, even after indexing, unless indexing takes days upon days. I understand why the Mini may have taken a speed dip, but a Core i5 unit too?
The upgrade was done over a dysfunctional system. Do this:
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Re-download and reinstall Mavericks.
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I am about to upgrade my Mac's OS from Mountain Lion to Mavericks. I recently networked to my Mac on our home wireless network an HP 8600 all in one printer/scanner and an HP LaserPro 127. I saw a note posted in a non-Apple forum stating that the Mavericks upgrade should include the drivers needed to run these products on Mavericks. Is that correct or will I need to download a new set of drivers from HP after I upgrade to Mavericks?
Any guidance would be appreciated.Hi mcubed33,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
Cheers,
- Judy -
HP p1006 won't print after upgrade to Mavericks
After upgrading from 10.8 to 10.9 my computer won't print anymore. It says "Pages not found!"
The printer is attached to a Mac server running 10.8 which is printing fine, but my computer (running 10.9) won't print unless I boot it from the 10.8 partition which still works.
What I've already tried: (on my computer & server)
Reset the printing system
updated drivers to HPPrinterDriver2.16.1
Repaired permissionsHi zmogy,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to print on the 10.9.
I will be happy to help you.
The HPPrinterDriver2.16.1 is the latest HP printing and scanning software for OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
Plug the printer directly into the 10.9 computer and run the Apple Updates to install the Apple drivers.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Test the printing.
I can't guarantee it will print over the server.
Hope this helps.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Problem with Hp printer after upgrade to Maverick OS
Scan pages, when saved to computer when click to save the pages and try to open saved documents their all black and have lines on them.( upgraded to mavericks OS) , before upgrade, the printer was working fine.
Mac 27-inch, Late 2009
HP Photosmart Premium Fax e-All-in-One Printer - C410aTry a reset > OS X Mavericks: Reset the printing system
-
Very slow encoding after upgrade from 5.03 to 5.5 with MXO2 mini
Hi all.
After upgrading from CS5.03 to 5.5 my encoding now takes 5 times as long. A 2 minute HD Video file would take 2 minutes, and still does on the PC I haven't upgraded (identical almost) but now with CS5.5 it takes almost 11 minutes.
Some explanation....
I create HD MJPEG files on a PC with Blackmagic Decklink.
I transfer these files to an HPz800 which used to run CS5.03 with Matrox Utils 5.1.1.37 and an MXO2 Mini with Max. (Nvidia Quadro fx4800 and 12GB of RAM)
On a Blackmagic timeline HD 1080i MJPEG with filters of Auto Color, Fast Color Corrector and Gamma correction a 2 minute timeline would encode in 2 minutes give or take a couple of seconds.
Now with CS5.5 and Mtx 5.5 an identical file takes 11 minutes to encode to Microsoft avi - Matrox 1920 x 1080i - 25fps.
If I remove the filters (which I need to be able to use) it will come down to 2 minutes as it used to be.....so it seems to be the filters are now slowing things down when they never used to. I have never rendered before exporting. Ever. So this time I tried rendering first and it brought the 11 minutes down to 7 minutes but when taking into account the 4 minutes rendering time I am no better off.
I have updated CS5.5 to CS 5.5.1 and MTX Utils to 5.5 and then 5.5.1 and it makes no difference. Still 11 minutes to decode 2 minutes with three filters, which is exactly what I have always been doing but now it doesn't work....
Can anybody help? or make a suggestion as to why using filters in 5.5 now multiplies the encode time by 5 when it never used to. Everything else bar Matrox Utils on this machine is as it was before the upgrade to 5.5 and as I say my older machine is still 5.03 it can do it all in 2 minutes even with the filters intact.
So have I really spent a small fortune upgrading to make my output 5 times slower. Not happy......To go further, every single encode that I have done is slower than it was before with CS5.01 or 5.03.
This is odd because going from Blackmagic to any other codec doesn't necessarily need the Matrox box or Matrox utils
Blackmagic HD or SD to
Matrox HD
QT HD MP4
QT SD DV25
DV AVI SD
Mpeg2 - DVD
Every single encode is slow by 2x to 6x.
Why should Blackmagic HD to QT MOV MP4 take twice as long as it used to...... having said that The speeds I am seeing now are what it was like before I attached the box in the first place, whether a Matrox codec was involved or not.... It is acting like a blocked funnel. when it used to be a lovely wide and clear funnel.
Anyway Matrox have reproduced the problem and are investigating, so hopefully there will be an answer soon.... -
Can't find a folder after upgrading to maverick and still have the previous OS
Hi,
Last night I upgraded my mac to maverick...my previous OS was in Disk C and since it was showing that disk is full i had to put maverick in disk D..so i have two disks with OS that means less space for my personal use....also while putting maverick in D I already had a folder containing movies in it...When i am searching in spotlight i can get the movie but am not able to find it without it....Also how do i get rid of the previous OS and should i do that??ishica ghosh,
it sounds like what you’re calling your Mac’s internal space is what I’d call your Mac’s internal hard drive, and what you’re calling your three separate disks are what I’d call three partitions of your internal hard drive.
Let’s begin by approaching these aspects one at a time. On my Mac’s internal drive, only 22 GB of space is being used in total, including Mavericks and perhaps a dozen apps. If your Disk C has been sized to be 119 GB but it is mostly filled up, then it seems as though you must have significantly more apps or data installed there than just your old OS. Do you have more than one administrative user and one standard user under your old OS?
Here’s something that you can try to find out the amount of space that is being used by the user accounts on Disk C: boot into the old OS by holding down an Option key as you power up, use your cursor keys to select the OS on Disk C, and press the Return key. Log in as its administrative user, and from the Finder press Command-Shift-U to open the Utilities folder. Run Terminal.app in that folder. Within the Terminal window, give it the following command:
sudo du -sm /Users/*
This command will ask you for a password; give it the administrative user’s password. The password will not be displayed as you type it. Please copy the output from this command into your reply. -
Autofill ( on Safari ) not working after upgrading to Maverick and Safari 7.0
Upgraded to OS 10.9 ( Maverick ) and Safari 7.0 User information and passwords transfered okay ( from previous version of Safari ), but the autofill function does seem to work on any web pages. Safari preferences shows autofill in checked ( on ) .
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Z2 very slow charging after upgrading to lollipop ?
Please help me
After i upgraded my mobile from kitkat to lollipop android i charged my mobile .. from 5% to 70 % it took over 6 hours !!!!
Before updating the maximum time was 3hours from 1to 100%
P.S : the same cable and chager is present .. Nothing new used !!!
please explain what happened after this update ??Not sure what we can do to help but maybe it's just that you have upgraded and it may take time to settle down - You could try performing a system repair
Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman
Maybe you are looking for
-
I just purchased a itouch and when i try to connect to the wireless networks that pop it it will give me the check mark, when i open safari and try to access a web page i.e. google, it tells me safari cant find a server? even when my wireless symbol
-
Hi All, i have deleted obsolete machine from SMS collection after that i reinstalled the SMS client and readded the same machine still that machine is showing client status is NO Please help me what to do
-
In recovery mode, I cannot unlock Filevault2-encrypted Macintosh HD
Hello! I boot with cmd-R to access recovery tools If I try to reinstall Lion or do a "checkdisk", I have to unlock Macintosh HD first. So the small popup appears and I enter my password My password is refused. No way to unlock the encrypted Macintosh
-
Address bar only says "go to a website" after installing realdownloader.
After an update to RealPlayer, the address bar would only say "go to a website", not the address of the page I was on. System restore fixed it. I deleted RealPlayer & installed RealDownloader (because that is all I want to do). I have the same proble
-
Help with Automating Contact Editing Please!
Hey Apple Community! I'm having some trouble organizing my contacts and sorting info fields. Basically I have a few hundred contacts, and certain fields of the information should be in others. Here's some of the things I want to change. First and for