Very slow receiving and placing calls

My Z30 lags big time when placing a call and also when answering an incoming call.. I would say there is a 10 - 20 second delay.. very annoying, is anyone else experiencing this issue? Is there a solution to this problem?
Solved!
Go to Solution.

Yes, resetting the phone solved the problem of slow call out and receiving call!
Yay, thank you!

Similar Messages

  • Need to disable logs of Received and placed calls in cisco

    Hi All,
    How and Where do i disable the logs of received and placed calls in cisco phone configuration?
    I am using CUCM V7X.
    Thanks in advance !!!!

    I've tried them all and nothing beats Verizon. All around. I live in a building with metal walls and couldn't get reception with my iPhone 5. I looked on eBay and saw a Verizon Wireless Network Extender actually made to Verizon specs by Samsung. I checked the prices and a new one from Verizon was $159.00. I got one on eBay for $59.00 free shipping. Hooked it up, called Verizon for free activation and now I always have 5 bar reception. No additional charges besides purchasing the extender. Out of 5 different providers including AT&T I get the best reception everywhere with Verizon.
    Just thought you might want to know.

  • My samsung stratosphere is very slow to place a call.  I input the number and push CALL.  Nothing happens.  I try it again and nothing happens.  Then some time later (2-5 mins) the phone goes ahead and dials.  What is causing this delay in dialing?

    my samsung stratosphere is very slow to place a call.  I input the number and push CALL.  Nothing happens.  I try it again and nothing happens.  Then some time later (2-5 mins) the phone goes ahead and dials.  What is causing this delay in dialing.

    wadams5641,
    Let's add some speed to your service and ensure you can make calls without the
    delay. When was the last time you turned off your phone? Is the software up to
    date?
    KarenC_VZW

  • Very slow broadband and connection keeps dropping

    Hello, we have been BT customers since August 2013, after previously being Freeola customers for many years.  We live in a very rural area, at the end of the exchange so we are never going to get amazingly fast broadband, we are estimated 1MB. 
    Previously using Speedtest.net at the beginning of the year we were getting 0.9Mbps, then in May our internet dropped and we couldn't get a proper connection or speed.  We contacted Freeola who after doing some tests, said that we had a copper line failure and to contact BT.  We did this and the copper line failure issue was fixed, an openreach engineer tested the line and we assumed all was fine.  But we were still getting very slow speeds and the connection kept dropping.  So we decided to switch to BT in August, we have put up with the slow speeds and dropping connection for 3 months hoping in vain that once we got a stable line the speed would increase and we would be back to were we expected to be.
    When we are using the internet, we very often get "Your connection has been reset" errors within our browsers.
    This has not happened, so I have decided to come on to this forum in the hope that we can solve this issue before my hair gets any greyer.  We have a BT Home Hub 4 so we have not got all the stats that previous HH had available. 
    Also as we are in a rural area our telephone connection is through overhead cables and as said previously we are at the end of the exchange.
    Please see below for the information that I have been able to get:
    Home hub stats:
    17:28:52, 28 Oct. ( 68.040000) DSL noise margin: 12.00 dB upstream, 9.50 dB downstream
    17:28:51, 28 Oct. ( 67.970000) DSL line rate: 448 Kbps upstream, 192 Kbps downstream
    Internet Connection Configuration
    Connection Information
    Connection time:
    4 days, 22:01:39
    Data Transmitted/Received:
    221.4 MB / 2.3 GB
    Bt Wholesale Broadband test:
    Download Speed: 0.02
    Upload speed: 0.34
    Ping latency: 0.00
    Further diagnostics:
    Master socket is
    I performed the quiet line test which wasn't too bad there was a very slight crackle, but it was with a wireless phone.
    Speedtest.net results:
    Ping: 463ms
    Download:0.13mbps
    Upload: 0.28mbps
    As said previously before the copper line failure we were regularly getting download speeds of 0.9mbps.
    Any help would be greatly appreciated.
    Solved!
    Go to Solution.

    Hi jacoma,
    Sorry to hear that your  having issues with your BT Retail services.
    You will either be on the ADSLMax (upto 8mbps) service or if your exchange has been BTw 21cn upgraded you maybe on the ADSL2/2+ (upto 12/20mbps) service depending on your line quality and length.
    However these upto speeds may not be the speeds you will get as ADSL broadband connections are very dependent on the distance from your property to the exchange and the quality of your line. The further away you are from your local exchange the slower your broadband speed will be.
    To enable the community to help you please see the advice below:
    Please see Keith's help guide here: Helping forum members to help you, it will go through some checks that are needed for us to help you.
    1) Are you in the TEST socket? if not can you please connect to the test socket and repeat steps 2, 3 and 4.
    All the below performed in TEST Socket:
    2) is there any noise on your line. dial 17070 option2 ,called quite line test, from landline phone. should be silent but slight hum normal on cordless phone.
    If there is any noise on your line such as crackling, distictive noise when the phone is connected to the TEST socket and doing the quiet line test then you need to report a line fault to BT Retail by dailling 151. Once the crackling or disticive noise has gone then your broadband should slowly recover.
    3) please post adsl line statistics 
    4) Can you please run a BT speed test (including IP Profile) http://speedtest.btwholesale.com (not beta version)[Best done with a wired, Ethernet, connection] After Quick Test is done you need to click "Further Diagnostics" to get IP Profile.
    ADSL Line Statistic Help:
     If you have a BT Home Hub like the one below...
     Then:
     1) Go to http://192.168.1.254 or http://bthomehub.home
     2) click Settings
     3) Click Advanced Settings
     4) Click Broadband
     5) Click Connection or sometimes called ADSL (see picture Below)
    The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3.A firmware ending in 1.3)
    or http://bthomehub.home/index.cgi?active_page=9118 (for bthomehub3.A firmware ending in 94.1.11)
    You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
     If you have a HomeHub 4 then the majority of the ADSL Stats shown in the previous Hubs will not be there.
    for HH4 users you can go to hub manager then select troubleshooting then logs and are look for 2 entries together which will show theconnection speed and noise margin for when your HH4 last sycned with the exchange.
    There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
     cheers
    I'm no expert, so please correct me if I'm wrong

  • Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

    Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

    Cured the problem! Reinstalled an earlier version of itunes from oldapps.com (version 10) now everything works as it should. I would suggest that if you are experiencing these problems that you do the same. I must say that it is a brave business decision on behalf of apple to effectively lock out all windows 7 users from their products and sales channels and I can only wish them luck in this very shortsighted policy.

  • Missed calls and placed calls are not saving in 7942 phone

    HI 
    i am facing some issue in telephone directory, in my phone missed calls and placed calls are not saving. i am using cisco call manager and 7942 phone. please help me in this issue.
    Thanks 
    Shijo

    Hi Shijo,
    Is this affecting only one 7942 IP  phone or all of them? if this is affecting all then you may try ta firmware upgrade. If this is only affecting one of them then you can compare the settings of this phone with the working ones or try setting the phone to factory defaults.
    HTH
    Manish

  • I get constant buffering very slow downloads and the pinwheel.  is there a keystroke remedy for this??

    i get constant buffering very slow downloads and the pinwheel.  is there a keystroke remedy for this??

    No magical keystroke remedy. The causes for this can be complicated.
    http://www.thexlab.com/faqs/sbbod.html
    Also check the health of the drive with the free demo of SMART Utiltiy.
    http://www.volitans-software.com/smart_utility.php
    Only happening while on the Internet or all over the place? What's your Internet speed?
    http://www.speedtest.net/

  • What is wrong with the app store and how long before its fixed, im downloading atna very slow pash and i have a 10mb uncontested line.

    What is wrong with the app store and how long before its fixed, im downloading atna very slow pash and i have a 10mb uncontested line.

    Sorry, its on both my iphone 4s (2 iphones) and ipad2 that the app store is slow, I have done all the above and still when i download a 1 mb app it take about a half a hour just to download and previously it wasn't even a second. When browsing the web the devices are fast and internet speed is good, but when going in to app store it takes long to load and show me the new app, updates, featured app ect. We watch movie online and the streaming is brilliant. Even on my windows pc the app store is slow and sometimes says that i store could not be opened, i have also tried on my buddies wifi and there it does exactly the same which makes me think that its on apples side, but why do you not have any problems? 

  • Facetime is not working in Ipad 2 after updating IOS5. I can't receive and transmit calls. Facetime uin the setting is on.

    Ipad 2 WiFI + 3G, Facetime is  not working after updating to IOS5. The facetime in the setting is turned on. I can't received and transmit calls.

    I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

  • My iphone 4 wont receive and make call i already  did reset networ setting but still wont work..help me pls..

    anyone can help me about my prblem on my iphone 4,.my phone wont receive  and make calls..i already did the reset network setting,and off the 3G ..but still wont work..help pls..thks

    try easy first.  if pre paid make sure you have not ran out of date,might need top up.  if on contract check with your provider to see if they have stopped your account, if all fails ring apple

  • I am experiencing very slow import and backing up issues.

    I am experiencing very slow import and backing up catalog on exiting Lightroom. This is a very recent issue. I use RAW files.

    The type of files you are importing will have an effect on the speed of the import process. Larger files, like raw sensor files, are normally much larger than JPG files.
    But if this is something new, the slowness, and you are using the same camera with the same size files as previously then it's not just the file size.
    What type of computer and what operating system are you using.

  • TS3899 I am trying to pull up an old email that I received and placed in the trash.  When I press "load more messages," the older messages do not pop up.  What am I doing wrong?

    I am trying to pull up an old email that I received and placed in the trash.  When I press "load more messages," no additional trash eMails pop up.  What am I doing wrong?

    You're not looking in your trash can.  And if you've emptied your trash can, the message is gone.
    To open your trash, you have inboxes on the top, and accounts below.  Tap the mail from the accounts.  That's where your trash can is.  Tap it.  If the mail is not permanently deleted it will be in the trash.

  • HT1807 With cellular and Data networks off, can I still receive and make calls on my 4s

    With cellular and data networks off, can I still receive and make calls.

    Old guy, still learning to use cell phone. Going out of US and don't want to have big charges when I return. I do want to have my phone on for emergencies and I plan to get international  cell. and messaging.

  • Droid X receives and sends calls but neither party can hear

    My Droid X would receive and send calls but nether party can hear each other, however I can send dial tones on the line.  The receiving side can not send tones.  Resetting to factory is dramatic.  What can I do to fix this.  Thanks!

    Sounds like the software could be corrupt, how is hard reset dramatic?
    It is either hardware or software, you won't know until you eliminate one.

  • Very Slow Broadband and Poor Customer Service

    Hi,
    Since April we have been having issues with our broadband line dropping the connection and terribly slow speed (around 0.4Mbs). We have had 3 engineer visits changing the master socket, home hub, filter and even work done out in the road. Each one has supposedly 'fixed' the problem, only for it to return to the very slow speeds within a week or so.
    Our fourth engineer visit was booked for this morning, and the engineer failed to arrive. I received a phone call to say BT needed to re-arrange the appointment as the reason the engineer hadn't arrived was because BT had decided that it needed to be a 'multi services' engineer not a 'external' engineer.
    I didn't even get an apology when I pointed out that I'd taken half a day off work to wait for the engineer when I could have been notified that the visit had been cancelled. Unfortunately we got cut off before I could re arrange the appointment so I called back, only to be told by the next person that in fact the reason the engineer hadn't attended was because of a BT OpenReach outage. After re-arranging the engineer visit I've now been sent 2 confirmation texts one to say they will be coming on Friday, one to say they will be coming on Monday. Hence another 10 minutes of my day calling to confirm when they would actually be attending.
    I have also been incorrectly charged the £129.99 Engineer Home Improvement Charge as a result of the 2nd engineer visit due to an ‘admin error’. This was refunded to my account following 3 phone calls (one to ask why the money had been credited to my BT bill when I'd specifically asked for it to be returned to my bank account) but it caused me to go overdrawn in the process incurring bank charges.
    I have raised 2 complaints, but no-one has contacted me concerning them (now 2 weeks and counting). When I finally lost it and called to cancel the contract I was told that as I was still in my minimum term I would have to pay £208 for the pleasure. My counter argument that for a total 3 months BT have not been providing the service we’re paying for seemed to fall on deaf ears.
    I don't run a business, but I'm pretty sure this is not how to do it...
    If anyone has any help/advice it would be greatly appreciated.

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    is there any exchnage problems listed  http://usertools.plus.net/exchanges/mso.php
    http://usertools.plus.net/exchanges/?
    http://btbusiness.custhelp.com/app/service_status
    http://bt.custhelp.com/app/answers/detail/a_id/15036
    http://community.plus.net/exchange-information/
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for