Very strange issue regarding Sender JDBC to Recevier RFC?

I've been testing sender JDBC to Receiver RFC,
but i realized that target RFC was not performed even though moni is clear and RFC adapter monitoring is clear,
both monitoring is successful.
also checked that RFC_Receiver adapter setting is correct.
i also checked RFC Function at Target side whether it is running or not correctly, it is no problem with test value.
i've never been seen such issue.
Dose anyone has such experience?
Message was edited by: Tony
Message was edited by: Tony

yes, nothing there.
but i forgot to tell you one thing,
sender has one and target has two each communication channel on service, JDBC to JDBC and RFC.
JDBC to JDBC is ok, but JDBC to RFC is above issue.
sxmb_moni has two message according to above two receivers when i execute, and two messages are correct
adapter monitoring is correct
Message was edited by: Tony

Similar Messages

Files transferred to external HD end up in trash - very strange issue

Hi,
I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
Has anyone experienced this or have any suggestions?

Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

A very very strange issue on BlazeDS Deserializing

Hi all,
I run into a very very strange issue on BlazeDS Deserializing. Is there any hint or idea? Thanks a lot!
Scenario 1:
Both the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine.
Actual result:
Everything works fine. All the properties in the Flex Object could be mapped to the Java Class
Scenario 2:
The browser(firefox or IE) and the midtier (BlazeDS ,java) are on the different machine.
Actual result:
Sometimes it works fine.
And most of the time it does not work fine. Only the data in List is mapped correctly. All the values of simple data type such as int are mapped to 0 .
Let me simplify the problem.
The objects of Class B is always stored in the ArrayCollection assocItems of Class A
Flex side:
public class A {
public var id: int;
public var name: String;
public var assocItems: ArrayCollection=new ArrayCollection();
public class B {
public var id: int;
public var assocItems : ArrayCollection=new ArrayCollection();
The id , name in Flex Class A and assocItems in Class B could be deserialize to correct value . But the id of Class B is always mapped to 0. This is not correct.
The log level of BlazeDS is configured to Debug. From the log I can see that each value is passed from Flex side to Java server side correctly.
[BlazeDS][INFO] Channel endpoint my-amf received request.
[BlazeDS][DEBUG] Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/18)
(Array #0)
[0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
However, the Java object does not get the correct value of B.id.
In conclusion,
1. It’s an issue with only default types
2. It does not occur every time
3. It does not occur when the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine
Have you ever run into the similar problems? And what’s your solution?

I checked, when I hard-code the constant in linq, the generated sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ('1062303212007000121' = "Extent1"."AA")
if I pass a variable to the query with same value, the sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ("Extent1"."AA" = '1062303212007000121' /* @p__linq__0 */) (@p__linq__0 is passed as parameter)
The only difference is a paramter. I can't figure out why there is such a impact on performance.

Sender JDBC to Receiver RFC scenario

Hi All,
I have to configure an scenario of sender JDBC to receiver RFC wherein SAP PI will be pulling data from third party database (Oracle).
Since I am configuring such scenario of sender JDBC, I want help on every important key aspects/prerequisites of configuring sender JDBC adapter/channel. I want to understand about Database Connection, Processing Parameters, etc. details while configuring sender JDBC channel and their significance/relevance.
Also I need guidelines about the source data structure (message type or external definition) to be used/created in ESR.
How sender JDBC channel and receiver JDBC channel differs from each other?
Please guide me on this.
Thanks & Regards,
Amit Patil

Hi Amit,
First of all you should read the sap.help documentation:
Configuring the Sender JDBC Adapter - Advanced Adapter Engine - SAP Library
Configuring the Receiver JDBC Adapter - Advanced Adapter Engine - SAP Library
Later, you can read Rajs's blog to advance concepts and perfomance JDBC Receiver scenarios best practices part-1
Finally, search the other blogs and documents in the SCN.
How sender JDBC channel and receiver JDBC channel differs from each other?
JDBC sender always does a poll to a DB table (with join some tables) in wich table you will need a field checkbox to mark the registers read, and the the receiver JDBC you can do a typical SQL construction like SELECT, INSERT, DELETE, etc. Both cases need the JDBC DB driver installed (check the SAP notes for this, also you can find some examples in the SCN:http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8000cffc-6b92-2d10-3493-f2ac1399242f?quicklink=index&… PI/XI: deploy a JMS/JDBC driver without JSPM? ).
Regards.

Very strange error : IDOC to jdbc scenario

Hi
I am getting a very strange error when I see the log for the idoc to jdbc scenario that I am building.
The mapping test shows the header record and line item record properly in the mapping result.
insert, access nodes, fields with access nodes are all formed correctly.
However the communication channel log shows below error.
Could not execute statement for table/stored proc. "tblTestItem" (structure "Item") due to com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'tblTestItem' (structure 'Item'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
The message status was set to WAIT.
The query that I see in the log is :INSERT INTO tblTestItem () VALUES ()
However mapping tool shows that all nodes are correctly formed.
Please assist.

Hi
I am still getting this issue even after the below steps so kind of stuck - actually very much stuck.
1. Restart of the dev environment
2. Tried with a new extension of the idoc
In the communication channel log for the JDBC receiver channel I still see
INSERT INTO tblItem () VALUES ()
The payload that I see in the message content tab is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_XXX_XXXX xmlns:ns0="http://capita.com/pi/XXXX">
- <Statement>
- <dbTableName action="INSERT">
<table>tblItem</table>
</dbTableName>
- <access>
<InvoiceNo>0000000009293467</InvoiceNo>
</access>
</Statement>
</ns0:MT_XXX_XXXX>
How do I debug the jdbc adapter to see how it converts the above xml output from the mapping step (note that this output is from an actual run and not test tool) to a sql query.
Very strange that the column names are present in the target payload but it is not reflecting in the query.
I have other tables being populated with the same jdbc receiver communication channel which makes this more and more confusing.
PLEASE ADVICE.

Premiere Pro CS5.5 -very strange issue with the color tones and Preview-

I deal with a very strange and not usual problem in Premiere Pro CS5.5 (also the version CS5). What I try to do is just a simple color correction. The problem occurs when I try to use Three Way Color Corrector but it happens with Fast Color Corrector also.
When applying the Three-Way Color Correction and without changing anything else (just applying), can be seen in the preview of the soft how sudden changes in color tones. For example, the gray tone becomes a little more green, but also can be seen very easy a change in the other color tones too. In fact even RGB Parade show the same thing. This is very, very strange and unacceptable and saw that it happens when trying to use Colorista II too.
I tried the same thing in Sony Vegas Pro 11 and I downloaded the trial version of Edius 6 to convince me if the same thing happens. Not! In Sony Vegas and Edius everything is working correctly, I have not experienced these problems in the preview's of this 2 others softs.
This issue is very annoying because every possible color correction is based on what we see in the preview and if in this preview the tones are seen altered realize that can not make a decent color correction. So what happens here?!? I uploaded a small video demonstration to see very clearly about what I'm talking. You can see in the next link: http://vimeo.com/35317616

Yes Jim, you're right. No changes in the scopes when one just apply RGB Curves, Fast Color Corrector, RGB Color Corrector or the Three way Color Corrector (last three thanks to the new update 6.03). I already wrote that Adobe team has been able to fix this bug for some of the tools/effects.
But Brightness&Contrast? Change Color? Color Balance? Levels? MBLooks? Twixtor? Colorista II? Does it seem normally that all scopes or just one of them jump when you just apply one of these effects/tools? Not to say that in some situations even the tones change (especially in shadows&midtones).
You say this is something "very minimal". I say it is not so. I don't find normally to make a very detalied CC with Three way Color Corrector and then when applying Colorista/MBLooks, for example, the scopes jump and inclusively some tones may be influenced. And I left clear examples in this topic where you can see that this is possible. I don't know if this is "very minimal" or not, but is really so impossible to edit in Premiere without this "very minimal" issue?!? How can it be possible in other softs (Edius, Media Composer, Vegas Pro) and in Premiere not?!?
One more thing: many of us use intermediate codecs in the editing process. Do you find normally that a AVCHD video have the lumninance at approximately 110IRE, to export it directly to Cineform and then import it in Premiere, and the waveform shows the luminance at 100IRE?!? How is this possible?!? So the AVCHD video have a 110IRE luminance, you convert this video to Cineform without changing anything, and then this Cineform video have the luminance at 100IRE?!? And anyone can verify this example.
So, how can one trust in this soft?!?

Can't delete folder (or files in it) - VERY strange issue

ok i know there's been tons of questions about how to delete/force delete a troublesome file or folder. believe me, i searched, i've tried them all, and still, i couldn't solve it.
here's my problem:
a) 4 files, in a folder called "as".
- 06Jacksons Club "Sunspot".mp3
- 11_Novelette Conclusion" excerpt_Lisa edit.mp3
- 16_Green Tea At Denny_s _Mary P. _Aka High Places Singer, Bassoonist, Zine-Maker, BOO - The "P" Is For Pearson_].mp3
- 20_"Arrival In Benaras__ From Merchant-Ivory_s Film __The Guru__.mp3
b) things i tried so far, and what happened:
- using the terminal with sudo/rm. answers for a file: "No such file or directory".
- using the terminal with rm/sudo to delete the whole folder:
rm: /Volumes/Untitled/as/: is a directory ... is the answer i get, and it stays there, doesnt move
c) if i move it into trash, when i try emptying it, everything goes except for that folder and it's files inside, neither does force deleting it via the terminal make it disappear. the "crushing" noise is audible, but nothing happens. no errors or anything, it just stays there.
d) if i click on one of the files, they disappear (!!!). if i play around in finder and come back to that folder later, they're there again. the folder itself can be normally copied, renamed, moved around on the harddisk and everything. if i duplicate the folder, the dublicate is empty, unlike the original folder.
e) NO music player or anything else ever used those files.
f) they are 0 bytes each.
g) another note: the files and the folder are on an ext. harddrive. the harddrive is not faulty.
h) i even tried deleting them from a windows computer, which keeps saying the filenames are too long or invalid, and it wont work either.
i) the folder or the files are not locked, i have full read/write permission, i tried reinstalling several times, i also tried it from safe mode.
j) formatting the harddisk is NOT an option.
i would be very helpful if anyone could help me with this very annoying issue. i just want to see my trashcan empty for once.
thanks very very much!

Try booting to Safe Mode (hold down the shift key while booting, restart may take a long time but let it go), sometimes just doing that works. Restart normally.
Reading
[You can't empty the Trash or move a file to the Trash in Mac OS X|http://docs.info.apple.com/article.html?artnum=106272]
[Solving Trash Problems|http://www.thexlab.com/faqs/trash.html]
[How To Fix Stubborn Trash and Why it Won't Delete|http://www.osxfaq.com/Tutorials/LearningCenter/HowTo/Trash/index.ws]
*Utilities for emptying trash*
[Trash It! v3.6.1|http://www.nonamescriptware.com/?page_id=5]
[DropNuke|http://www.versiontracker.com/dyn/moreinfo/macosx/12664]
[Super Empty Trash 2.3|http://www.macupdate.com/info.php/id/16727] - Simple AppleScript applet that will empty the Trash with administrator privileges
[What's Keeping Me|http://www.hamsoftengineering.com/products/wkm/wkm.html] - lists files open and applications that are using them

Namespace issue in Sender JDBC message

Hi All,
My scenario is pulling data from Oracle DB(3rd party) and pushing it to SAP ECC system. Here I am using the table metadata in the form of an External Definition.I am directly using this ED in my message mapping and service interface. I am able to test the mapping locally, when I run the scenario the target message type is generated but the main element node inside is automatically suppressed. The structure examples are given as below(been taken from message mapping test tab):
Source
<?xml version="1.0" encoding="UTF-8"?>
<ns0:TABLE_NAME.resultSet xmlns:ns0="urn:sap.com:jdbcAdapter">
   <row>
      <A/>
      <BV/>
    </row>
</ns0:TABLE_NAME.resultSet>
Target:
<?xml version="1.0" encoding="UTF-8"?>
<MT_Inbound>
   <Main_Node>
      <X/>
      <Y/>
   </Main_Node>
</MT_Inbound>
I guess the problem is with the namespace and prefix which is coming along with the table metadata(ns0). I tried removing it by XML AnonymizerBean module in my sender JDBC channel but this did not solve the purpose.
Request you all to help in solving this.
Thanks in Advance
Lalitkumar.

As you should have already noticed, the structure of sender JDBC adapter does not match the meta data.
The structure of the ED imported is :
TABLE_NAME.resultSet
      TABLE_NAME.resultSet
            row
                A
                BV
The structure getting generated after polling the JDBC adapter is as given below(structure from moni inbound payload):
<?xml version="1.0" encoding="utf-8" ?>
- <TABLE_NAME.resultSet>
- <row>
<A>20110206</A>
<BV>06:38:56</BV>
</row>
I am not able to make out the difference here. I am able to also see the namespace when i check the same in the message mapping test tab.
I am also a little lost now as abhishek is on a different track.
Please comment.

Very very strange issue: no more activation possible (iTunes 8.2.1 on a G3)

At first, i came back to iTunes 8.2.1 because using 9.1 is no fun on a G3 PowerBook (the loudness adjustment makes the computer unusable for hours, then the vents roar and the machine crashes!).
OK, because i still wanted to remote the G3 with my iPod touch, i got iTunes 8.2.1 wich runs very good on such an old computer. I am pretty shure that i already had this version on this computer, because i made almost every update... I use this computer just for listening Music! This Computer was activated all the time and with all Versions of iTunes - from 4.0 to 9.0 !!!!
What happens now is very VERY strange and i am loosing my mind. The apple support can't help me (they also resetted all my activations).
It sounds simple, but i am no more able to activate this iTunes!!! Everything is typed well, but no chance. It says everytime that the name or password is wrong. I also can't activate Genius!
I promise, tried everything: my last attempt was to make a complete Reset of the machine (i erased the whole disk and installed everything(!!!!!) from scratch!)
But with no luck - this machine will not let me f*/("&§ng connect to my account were i payed lots of euros for my music!!!!!!!
This is in fact the strangest thing that i ever gone through on computers (and i've seen lots of strange things, believe me!)
I hope that somehone could give me a hint...

I actually found the window hiding at the bottom of my screen, being covered by my dock, and was able to drag it up.
You can also go into System Preferences, then dock and then move your dock to the left or right to find the window.

OSX 10.8.5 + Pro Tools 10: Very strange issues - Firewire audio interface

I'm facing weird issues on my new system.
When I received my new iMac, I firstly used Migration Assistant. It didn't work well so I did a clean install. I installed the Digi003 drivers first, then PT, then all the plugins. Everything is up to date. Interface and computer are connected with a Firewire 400/800 cable and a brand new Thunderbolt/Firewire adapter. The computer is used for music production only and the hard drive is almost empty (not much data).
I know the Digi003 works fine as I used it with my former iMac which was a Core2Duo 3gHz with 4Go RAM running OSX 10.6.8 and PT 10.0.0. I used to set the buffer size on 128 to record audio. It worked well.
THE PROBLEMS ARE:
1- DigiAudioCore does not auto-launch anymore. If want to play a song with VLC, I have to manually launch DigiAudioCore.
2- PT stops (-6086) if I record with the buffer size set on 128. Buffer size on 256 is the minimum and PT still bugs sometimes even if there is only one track and no plugins in a 44.1kHz / 24bits session.
3- CPU spikes too if I have just a couple of plugins engaged.
4- I did some tests with an RME Fireface 800 and a Motu 828 MKII and I got the same issues (-6101). I still have to do a test with an USB interface.
5- Sometimes the iMac bugs when I open the System Prefs but it works normally after a few seconds.
I don't know what are the causes but it seems that there is a bandwidth problem caused by Thunderbolt/Firewire connection. I tried a brand new FW800 cable between the Fireface 800 and the computer but I got the same issues. Maybe the hard drive???
So now I really need some help to solve once for all these problems. I hope I don't have a do a clean install again!!!
Thanks in advance.
COMPUTER SPECS
iMac 27" bought october 2013
Processor: i7 3.5gHz (Turbo boost 3.9gHz)
Memory: 32Go RAM DDR3
Hard drive: Fusion Drive 1To
OSX: Mountain Lion 10.8.5
INTERFACE & DAW
Digi003 Rack+ (drivers up to date)
Pro Tools 10.3.7

Back up all data immediately as your boot drive may be failing.
This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Please help, Very strange issue when generate different template

Hello, Can someone help for below Strange Problem.
1. The PDF template files are defined in BI Publisher Layout as a.pdf, b.pdf
2. the parameters are defines in BI too
4. logic as below, generated PDF based on a.pdf. generated PDF based on b.pdf,
then merger a.pdf and b.pdf together.
5. Codes for generated PDF as below
this.reportDefinitionResp = bIPublisher.getReportDefinition(this.reportAbsolutePath, this.userID, this.password);
this.reportRequest = new ReportRequest();
this.reportRequest.parameterNameValues = this.reportDefinitionResp.reportParameterNameValues;
this.reportResponse = bIPublisher.runReport(this.reportRequest, this.userID, this.password);
6. the PDF generated by the a.pdf is correct, but generated by the b.pdf is not correct, instead it is same as a.pdf?
so after merger, we get the duplicate pages.
7. Not all templates has same issue, sometime we get this issue, how to fix it?

Hi
Click your HD to go to Finder,
Go to Your User/Library/Caches,
Drag com.apple.preferencepanes.cache to trash
Restart your macbook.
Good Luck.

Issue regarding sending E-Mail with PDF file(s) as attachment

Hi,
Can anybody provide me with code to send PDF file as E-Mail Attachment!
I know we have to use F.M <b>SO_NEW_DOCUMENT_ATT_SEND_API1</b> but how we have to use it to send PDF file as attachment!
I was able to send Text files as Attachments in my previous assignments.
Thanks in advance.
Thanks & Regards,
Kumar.

Hi,
Check this threads:
SO_NEW_DOCUMENT_ATT_SEND_API1
unable to e-mail a pdf through FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'
SO_NEW_DOCUMENT_ATT_SEND_API1
Best regards,
Guillaume
Message was edited by: Guillaume Garcia

Issue regarding sending attachment mail

hi all
i am using function module "SO_NEW_DOCUMENT_ATT_SEND_API1"
i am facing problem in sending attachment .....if width of my text line is more than 255.
pls guide me how to proceed further

Hi,
Check this threads:
SO_NEW_DOCUMENT_ATT_SEND_API1
unable to e-mail a pdf through FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'
SO_NEW_DOCUMENT_ATT_SEND_API1
Best regards,
Guillaume
Message was edited by: Guillaume Garcia

Very strange issue when displaying the Account PDF Factsheet.

We have a very odd situation.
We have one users (user1) who has the same business role as everyone else in the office. They can enter the UI (CRM 7), display an account and then click on the PDF Factsheet option. It seems to process and then simple says 'Done', but there's no PDF document displayed. At first I thought it was an Adobe issue, but, if someone in the office (user2) logs into SAP on user1's PC (in the same Windows session), they can perform the same process in the UI and the PDF is displayed, so it can't be a PC related issue, and must somehow be related to user1's SAP profile or role in some way.
Comparing User1 and User2's roles displays no differences, and their SU01 entries are also the same.
Can anyone come up any recommendations as to what it could be?.
I've more or less exhausted all my options.
Jason

I think we have discoverd what is causing the problem.
In CRM 7, when you view an Account (BP) the first assignment block to be show is the account details block. If you have this block collapsed (not expanded) or not on the screen at all then PDF fact sheet does not work. If I then expand the Account details block and review the PDF Fact Sheet, it then displays perfectly.
I guess there must be some dependancy of the PDF Fact sheet on the Account details block. I placed a breakpoint (normal and external) in the method of the class CL_UIU_PRN_ACCOUNT, but this code never gets called when the Account details block is collapsed. I'll have to find out what code is executed before this class/method is called.
Jason

Very urgent: query regarding sending mail frm infopackage

Hi all,
          At InfoPackage level at menubar in systems option--->short message option is exists.
       Can we use this option to send mail to client that infopackage has been successful or failure.
        Please send me more detaily how can we send mail to any receipent.I am unable to work on this option please help me out.
Thanks & Regards,
Praveena

Hi praveena,
if you want to send messages when the infopackage is successful, this can be done in the process chains.
Steps are as follows:
create process chain to include the Infopackage (IP) for which you want to send
   message
Right click on the IP , create message. pop up will come asking you when the
   message should be sent seolect when it is successful
Create variant for sending message and maintain the receipient list (email IDs)
with this you can send messages.
I hope this will help you.
Vijay.

Very strange issue regarding Sender JDBC to Recevier RFC?

Similar Messages

Maybe you are looking for