Very Urgent: illegal reference problem: Points assured

hi all
I have developed a class(type final) using SE24 with no subclasses or interfaces. Then from the program i am creating an object and calling methods. In the implementation of one of the methods, another method is being called i.e.
call method obj->meth , the method called has no parameters. But the reference is not correct. as it says in the dump
"Access not possible using "NULL" object reference.
Please help me solve this.
Points assured
Thanks

Hi,
Can you please tell me what obj is....?
Are you passing the object also into this method(in which the second method is being called)...?
If not, you can call the second method in the first method as
call method me->meth2.
The error you have given is coming because obj doesn't have anything to point to..
Hope this will be of some help to you...
Regards,
SP.

Similar Messages

Very Urgent?Facing Problems With Labels

Hi All,
It's Very Urgent,In My VC Application
Label Have More Than 15 Characters
I PUT Label Layout To Long Label.
My Label Name online assignement date
But Even Put Long Label, online ***.......
Please Resolve The Problem ASAP.
Thanks
SubbaRao Chinta

Hi Subbu,
I told u already its an Know issue with Flex compiler ,Even u set the label to long label it will show u only short label.
This issue is fixed with Flex2 compiler.
Use Flex2 compiler for ur application then it will dispaly the total label u want display.
Regards,
Govindu

Netwr and fklmg dividing problem -------- points assured

hi,
I am stuck in a problem please see the code
my internal table
 data: begin of it occurs 1,
 vbeln like vbrp-vbeln,
 netwr like vbrp-netwr,
 fklmg like vbrp-fklmg,
 fkdat like vbrk-fkdat,
 erzet like vbrk-erzet,
 end of it.
SELECT avbeln anetwr afklmg bfkdat b~erzet
 INTO corresponding fields of table it
 FROM vbrp as a inner join vbrk as b on avbeln = bvbeln
 UP TO 1 ROWS where amatnr = komp-matnr and bfkart ne 'ZPRO'
 order by bfkdat descending berzet descending.
read table it index 1.
value = it-netwr / it-fklmg.
if it-netwr = 1000.00 and it-fklmg = 1.000
value is coming as 1.00
I declared VALUE like vbrp-netwr.
-> if I declare VALUE(21) then my out put is 100
-> but actually it should be 1000.00
please help me.
points assured.
regards,
Prabhu

Hi Prabhu,
I think the declaration for Value matters here. I tried this in a test program,
REPORT ztest.
DATA: lv_netwr TYPE netwr_fp VALUE '1000.00',
 lv_fklmg TYPE fklmg VALUE '1.000',
 lv_value TYPE netwr_fp.
lv_value = lv_netwr / lv_fklmg.
WRITE:/ lv_value.
The value that we get for lv_value is '1000.00'.
Reason being NETWR_FP is CURRENCY FIELD and FKLMG is QUANTITY FIELD. When we divide these two we need to have the result in a datatype that can hold bigger values.
Try declaring lv_value of type NETWR_FP. I think you should get the right value as output.
Reward points for helpful answers.
Best Regards,
Ram.

Very urgent-Monthly utilization problem

Hi All
I m having problem when i am trying to do monthly utilization
When i am executing T-Code J2IUN ,I have selected the plant and excise gruop
After that it is displaying
RG23ABED
RG23CBED
RG23ASED
RG23CSED
Correctly that is it is showing all positive amount
But PLABED it is showing Negative amount
We have checked with the abaper ,he told us that it is taking current fiscal year amount and previous yr i.e 2007-2008 it is not taking
What can be the possible solution
Awaiting for quick response
Point will be duly awarded for the answers
regds
sahilesh

Dear Shailesh,
The Balance which is shown in J2IUN transaction is for all the business areas for a particular companycode. When you are doing a utilization for a particular excise group & for a particular period (say Today) then system will show the PLA balance for all the business area in J2IUN for the fiscal year 2008 if your fiscal year variant is fro April-March. So check the G/L balances of the duties which are shown correctly as well as the PLA G/L balance & also check your PLA G/L account assignment in
SPRO/Logistics general/Tax on goods movements/Account determination
Thanks & Regards,
SAP FC

Very urgent!! Problems with the H.263 codec on JMStudio

I downloaded the JMF Version 2.1.1e ' version.
The H.263 codec doesn't work.
I noticed that the file sound.jar wasn't in the lib directory of JMF-2.1.1e.
Is for this reason I have problems with the H.263 codec??
Thanks for your help.

What do you try to broadcast? H263 is a video codec, not audio..

Very Urgent...problem while creating SQ01

Hi Friends,
When I'm trying to create sq01 it is throwing the error like"the User Nanditha is not assigned to any user group".
Pl help me to resolve this issue.
Thanks in advance.
Nanditha

GOTO SQ03
Enter the User group & also the User i.e. Nandita & the Infoset (optional), click on change --> tick the check box for all the User groups you want to assign the User.Save the details
SKR

Counting Unique Records: very urgent

Hi,
I have to create a query for which i have to count the unique records appearing for a particular selection. For that i created a CK and in its agregation set Count all values <> 0 For customer. we are having Modality in my rows and CK in column. Now what happens if for 4 different records there is one customer then output appears one against that modality but it should show 4. As such there is no unique field in the cube that i can count. But we have maintined a Count key figure against each record in the cube that has value 1 for each row. But as it is a Key figure i cannot use it in aggregation. Is there any way to solve this situation....
Please help. Its very urgent..
Thanks
Points assured.

Hello,
Use Exception Aggregation as Customer. It will work.
Crearte CKF
 Assign 1 initial value
 Count all properties
 Exception aggretion is Customer.
I think It should work
Thanks,
Kishore
@KR

Open items for purchase order its very urgent

hi
my requirement is to write extract program for purchase order(me21) to extract only open items.
please provide sample code its very urgent.
thanks in advance.
points will be rewarded.
thanks
hari prasad reddy

check the below report :
REPORT ZMM_OPEN_PO_REPORT no standard page heading
 line-size 255
 message-id zwave.
======================================================================
Program Name : ZMM_OPEN_PO_REPORT *
Description : This report displays all Open PO Items and output *
 would be PO Number,Material number and so on *
Author : Seshu *
Date : 01/24/2007 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
01/24/07| Seshu | DEVK921979 | Initial *
D A T A D E C L A R A T I O N P A R T ***
type-pools
type-pools : slis.
Tables
tables : ekko, " Purchase order Header
 ekpo, " Purchase order Item
 marc. " Material with Plant data
Internal table for output.
data : begin of i_output occurs 0,
 ebeln like ekko-ebeln,
 matnr like ekpo-matnr,
 end of i_output.
ALV Data declaration.
data : v_repid like sy-repid.
ALV Function Module Variables
DATA: gs_layout type slis_layout_alv,
 g_exit_caused_by_caller,
 gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat type slis_t_fieldcat_alv,
 gs_print type slis_print_alv,
 gt_events type slis_t_event,
 gt_list_top_of_page type slis_t_listheader,
 g_status_set type slis_formname value 'PF_STATUS_SET',
 g_user_command type slis_formname value 'USER_COMMAND',
 g_top_of_page type slis_formname value 'TOP_OF_PAGE',
 g_top_of_list type slis_formname value 'TOP_OF_LIST',
 g_end_of_list type slis_formname value 'END_OF_LIST',
 g_variant LIKE disvariant,
 g_save(1) TYPE c,
 g_tabname_header TYPE slis_tabname,
 g_tabname_item TYPE slis_tabname,
 g_exit(1) TYPE c,
 gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Ranges
ranges r_eindt for eket-eindt.
initialization.
v_repid = sy-repid.
start-of-selection.
Get the data from EKKO ,EKPO and MARC Table
perform get_data_tables.
end-of-selection.
display the data in the form of ALV
perform display_data.
*& Form get_data_tables
 Get the data from EKKO,EKPO and MARC Table
FORM get_data_tables.
clear : i_output.
refresh : i_output.
fill the dates in ranges
r_eindt-low = sy-datum - 7.
r_eindt-high = sy-datum + 14.
r_eindt-option = 'BT'.
r_eindt-sign = 'I'.
append r_eindt.
Get the data from EKKO,EKPO and EKET Tables
select aebeln bmatnr into table i_output
 from ekko as a inner join
 ekpo as b on aebeln = bebeln
 inner join marc as c on cmatnr = bmatnr
 inner join mara as d on dmatnr = bmatnr
 inner join eket as e on eebeln = aebeln
 and eebelp = bebelp
 where c~beskz = 'E'
 and c~werks = '1000'
 and d~mtart = 'FERT'
 and b~loekz = space
 and b~elikz = space
 and e~eindt in r_eindt.
if sy-subrc ne 0.
message e000(zwave) with 'No open purchase order found'.
endif.
ENDFORM. " get_data_tables
*& Form display_data
 text
FORM display_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER =
 I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = v_repid
 I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = g_user_command
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = gr_layout_bck
 IT_FIELDCAT = gt_fieldcat[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = g_save
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IT_ALV_GRAPHICS =
 IT_ADD_FIELDCAT =
 IT_HYPERLINK =
 I_HTML_HEIGHT_TOP =
 I_HTML_HEIGHT_END =
 IT_EXCEPT_QINFO =
IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = i_output
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_data
*& Form fieldcat_init
 text
 -->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Purchase order number
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'EBELN'.
LS_FIELDCAT-ref_fieldname = 'EBELN'.
LS_FIELDCAT-ref_tabname = 'EKKO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Purchase Order'.
ls_fieldcat-seltext_M = 'Purchase Order'.
ls_fieldcat-seltext_S = 'Purchase Order'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'EKPO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init

VERY VERY URGENT DME DOWNLOAD ERROR

Hi,
user he has runned payment using f110 he want the DME file it is not diplaying and showing error that no data exist
Experts please it is very urgent i will give points
Thanks
Radha

HI
Could you please check the Variant User has maintained in the Payment run
Ravi

J1i7 very urgent

Dear Experts,
Can any one tell me how to include additional data in J1I7 report,
i want to include "E cess on CVD, E cess on OVD, Basic duty, S cess on CVD, S cess on OVD"
and let me know how to include /include "Title" for this fields in J1I7 Report.
let me know the transaction code to customise J1I7 report.
It's very urgent, will assign full points,
Regards,
Babu.

Hai
Just try in this way with the help of your abaper copy all progeramme and create the new programme name with z and inthat ask the abaper to write the required specification..
Or
If not worked out you have to search for any user exit...
Regards
Raghavendra.M
SAP-Practice

Very Urgent: how to define field symbols in class using se24 Points assured

hi all
I am new to abap oo programming. I am using se24 to build a class
where some methods have code which involves working with field sybmols but i am not able to figure out way for how to define field symbols in the attributes section.
I tried defining like : fld_sym type ref to dbtab-fld
but in the method implementation if i try to use it like assign fld to <fld_sym> there it says fld_sym is not defined as a field symbol.
So can anyone please guide me how to define field symbols in se24.
Also what should be the general steps while creating a class using se24.
Points assured
thanks

Hi
Global classes are like Global fun modules in which the Methods and code is already written and is mainly used for Reusability purpose.
Goto SE24 tcode and see the std global classes like
CL_ABAP_CHAR_UTILITIES
see the links
chk out the links below:
General Tutorial for OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Have a look at these links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
SDN Series:
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/35eaef9c-0b01-0010-dd8b-e3b0f9ed7ccb [original link is broken]
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Basic concepts of OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
http://www.henrikfrank.dk/abapuk.html
http://www.erpgenie.com/abap/OO/
Reward oints if useful,
Aleem.

SQL Loader Oracle 10g problem in upload date with time data -- Very urgent.

Hi
I am trying to upload data using SQL loader. There are three columns in the table
defined as DATE. When I tried upload a data like this '2007-02-15 15:10:20', it is not loading time part. The date stored as 02/15/2008' only. There is not time on that. I tried with many different format nothing work. Can please help me ?
I have also tried with to_date --> to_timestamp it did not work.
The application is going to be in production, I cannot change DATE to TIME STAMP. This is very urgent.
LASTWRITTEN "decode(:LASTWRITTEN,'null',Null, to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:Mi:SS'))",
CREATEDON "decode(:CREATEDON,'null',Null, to_date(:CREATEDON,'YYYY-MM-DD HH24:Mi:SS'))",
LASTUPDATEDON(21) "decode(:LASTUPDATEDON,'null',Null, to_date(:LASTUPDATEDON(21),'DD/MM/YYYY HH24:MI:SS'))"

Your problem is most likely in decode - the return type in your expression will be character based on first search value ('null'), so it will be implicitly converted to character and then again implicitly converted to date by loading into date column. At some of this conversions you probably are loosing your time part. You can try instead use cast:
SQL> desc t
Name                                      Null?    Type
LASTWRITTEN                                        DATE
CREATEDON                                          DATE
LASTUPDATEDON                                      DATE
SQL> select * from t;
no rows selected
SQL> !cat t.ctl
LOAD DATA
INFILE *
INTO TABLE T
TRUNCATE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
LASTWRITTEN
"decode(:LASTWRITTEN,'null',cast(Null as date),
to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:MI:SS'))",
CREATEDON
"decode(:CREATEDON,'null',cast(Null as date),
to_date(:CREATEDON,'YYYY-MM-DD HH24:MI:SS'))",
LASTUPDATEDON
"decode(:LASTUPDATEDON,'null',cast(Null as date),
to_date(:LASTUPDATEDON,'DD/MM/YYYY HH24:MI:SS'))"
BEGINDATA
2007-02-15 15:10:20,null,null
null,2007-02-15 15:10:20,null
null,null,15/02/2007 15:10:20
SQL> !sqlldr userid=scott/tiger control=t.ctl log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Feb 29 00:20:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 3
SQL> select * from t;
LASTWRITTEN         CREATEDON           LASTUPDATEDON
15.02.2007 15:10:20
                    15.02.2007 15:10:20
                                        15.02.2007 15:10:20Best regards
Maxim

SAPscript Output Problem - Very Urgent - Please help

Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
John

Ok, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

Very Urgent Tab Problem

Hi to All...
I Designed the PDF forms using Adobe Acrobat Live Cycle Designer 7.0.
but i am facing tab problem.
for example: if i entered in the some text boxes then if i want to go back to previous text boxex means curser will go to the some other text boxes.
and also if open in internet Explorer tab issue is more.
is there any property we need to set?
please guide me its very urgent.
thanks in Advance...
chalmal Seetaram

To set the Tab order choose: 'Tab Order' under 'View' menu and read through the Tips.... it is easy.
Good Luck,
SekharN

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Very Urgent: illegal reference problem: Points assured

Similar Messages

Maybe you are looking for