Very weird date issue.

I have a client that is using CFMX7 Enterprise and an Oracle database. One of the database fields we're pulling in is a date. If the date/time is 04/04/2010 02:xx (2am range), coldfusion is automatically adding an hour to it and making it 03:xx.  I changed the time in the field to 1am and 3am and it worked fine with both those numbers and I also left the time at 2am and changed the date to 04/05/2010 and the time remained correct.
Is there some daylight savings time issue from CF7?  Anybody have a work around, besides putting in a catch for this specific date and time?

With a version of ColdFusion as old as CF7 you have to be aware that the daylight saving rules in the United States changed since that version was released.  If the JVM has not been updated to understand the new rules, then that version is going to be operating on the previous set of day light savings rules.
http://kb2.adobe.com/cps/447/d2ab4470.html

Similar Messages

  • Very weird dhcp issue

    We've started 're-vlanning' our main location here, breaking up depts
    into their own vlans.
    All seems ok so far, aside from a real doozy.
    For the IT vlan, we have one address that will not talk to our web
    content mgmt appliance. It's the 2nd address in our assignable pool,
    and it doesn't matter if it's dhcp or statically assigned, that address
    will not talk to that device.
    That is the *only* device that cannot be reached from this particular
    address in our dept vlan, every other one works fine.
    Any ideas on this?
    Stevo

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1
    > and it doesn't matter if it's dhcp or statically assigned, that
    > address
    So.... the title of this thread should actually be 'Very weird non-DHCP
    issue', since your own testing confirms this has nothing to do with DHCP?
    If you do a LAN trace on this machine as well as your web content
    management appliance do you see packets on either side? Both sides? If
    not on both sides but you do on the source (workstation) side see
    packets going out, then get LAN traces after each network device
    (switch, router, firewall, etc.) to see when the packets disappear.
    Feel free to post the LAN traces somewhere with descriptions of IPs,
    ports, and what you should be seeing, if you want to post them somewhere
    for review.
    Good luck.
    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.18 (GNU/Linux)
    Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
    iQIcBAEBAgAGBQJP4jFPAAoJEF+XTK08PnB55aMP/3Rg9u6LX6jFCXGYuex/oXdS
    NZ/liqfCgjyIcykWWeKGgdtm2I7JZOcFiG8YW2le55mcltvCL1VJW +1VGng4kZER
    0f4hjfyQ3CcQ6HIU3RM6VL5U2Pblb80MsEQe0qo0xgtPXipmjs i7Q0xIv9p0wT7A
    7JMkfgM9tfuI5Yro+BDLfSIkFWicKuKs1sKpNugKalPuyyRrzW IiznoalIKFshon
    a40ETLJVZmngBYfqfeZL9nPNsFlveFNXrDkdbl2WbaprsHtNnA NwZfVUIlc5kOCT
    MknY0GXof4/tk149OVCCLgjEzoRtTIZH0BJTHQwW7ANkWUUNYwi49+Mk46V0o awl
    oe1aA+NK9gl2bWXWLCtTro4ERSVMvkcI0OffytrfcBsqdCKg/g3QPMjV3kiVEULI
    xnSTsqFgOl2qO8qGaL6FJtk39ZBnCwqDPtmoNt93OK4hAhWBuA Xihc+kiQHrwkpO
    O04quZu8qQG6A6qwFDr+r+QqarFR3kielfvi7H6o5iLfZn/sDhvijGOAknJVctH8
    j8fezki9PMznkcT+of2Oe4T99K9fChN2WFSgUKdlpkYSjbkmjP fdbWloou+WBjCm
    7hHwnAbKPPgoN8aPPfw9rG9E+K/0YW2kt4wRu79BEDvF6eMv0UdDPE1qPuw1ttmm
    jg2zzMZDkgIG39A0P3u7
    =+fCy
    -----END PGP SIGNATURE-----

  • Very Weird Speed Issue

    Hi All,
    This is a strange one, so I'll try and keep it short and simple.
    Any speedtest I do, including speedtester.bt.com comes back exceptionally slow. usually around 300-400Kps. However, when downloading from newsgroups, the speed is 4.5MBps. Very weird. This is on BT Infinity with a sync rate of approx 38000
    Any ideas?
    Paul

    I am the author of the "BT_UK Problem" thread and have seen a great improvement in tests to the UK from the UK over the past day.
    Below is the best test taken today:
    London has improved too,but it and some other UK servers seem to be having probs with upload readings.
    So from my seat it is looking better and is/was I quess partly due the outage [power cut] that happened in the Birmingham area a few days ago.
    From the outstanding works list there is work taking place in the London area,so the tests to London might get better.
    "We are currently undertaking planned exchange works in London and the surrounding areas. We expect these essential works to be completed by 7am. During this time you may experience problems connecting to your broadband service. After this time it may be necessary to restart your router or modem in order to restore service. We apologise for any inconvenience this may cause."

  • Very weird importing issue

    I just got a new PC recently. When I go to rip a CD or convert a file to any format, if it's the last song of an album the same thing happens: the progress bar fills all the way and then it stops and ITunes freezes. All the other tracks will convert fine. I did not have this issue on my old PC and I bet that if I tried it again there, I wouldn't have this problem. Can anyone help me figure out what's going on and how to fix this if possible?
    Message was edited by: [CARGO]

    I should also mention that if I import multiple tracks I either get most of them or a few, and if I try to convert a track by itself the same thing happens.
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    Dell Inc. Studio XPS 8100
    iTunes 10.1.1.4
    QuickTime 7.6.9
    FairPlay 1.10.14
    Apple Application Support 1.4.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.3.0.69
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number A41CC120B010CBF5
    Current user is not an administrator.
    The current local date and time is 2011-01-17 23:32:37.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GTS 240
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 10.1.1.4 (x64) is currently running.
    iTunesHelper 10.1.1.4 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHlpa64 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: HL-DT-ST DVD+-RW GH50N, Rev B104
    Audio CD in drive.
    Found 18 songs on CD, playing time 77:28 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 05:26:18
    Track 3, start time 09:26:53
    Track 4, start time 13:00:43
    Track 5, start time 18:21:10
    Track 6, start time 23:20:63
    Track 7, start time 29:54:55
    Track 8, start time 33:13:70
    Track 9, start time 37:47:15
    Track 10, start time 42:56:63
    Track 11, start time 45:59:45
    Track 12, start time 48:42:48
    Track 13, start time 54:15:58
    Track 14, start time 57:47:20
    Track 15, start time 60:59:50
    Track 16, start time 64:22:13
    Track 17, start time 68:39:03
    Track 18, start time 71:21:65
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

  • Very Weird Sleep Issues - Help Needed

    Hey Everyone,
    I've been having some really weird issues with my iMac G5 lately. It will randomly go into sleep mode. Sometimes it'll do it once every hour or so, other times it will do it every 30 seconds, there is no rhyme or reason to it. I've obviously checked all my settings and the iMac has recently been to the shop to fix something else, but this new problem has developed over the last few weeks. It never crashes or freezes, it will just go into sleep mode and when I press a button it will turn back on. Working with video, this becomes the slightest bit annoying while trying to edit and such. So any help would be greately appreciated. And just as a side note: the computer is all updated, I'm running 10.3.9, and I believe my iMac is first gen (I don't think its the power problem they speak of because mine was just in shop for that issue)
    Thanks!

    Johnny, a SMU reset usually solves a number of power issues including sleep issues. If you go to this link it will detail all power problems. In step # 10 it refers to the SMU reset button and this is what you want to reset. The main part of the link is for when your Imac won't turn on at all, good reading but the SMU reset will probably fix your problem. Let us know, Bob :~))
    http://docs.info.apple.com/article.html?artnum=300908
    if your not familiar with opening your Imac go here
    http://manuals.info.apple.com/en/imacG5allModelsBackCover.pdf

  • LS HTML Client, weird Date issue

    Here's a strange one... In an application that I've just made, upon saving a record, LS seems to automatically modify the date of the record by exactly minus 1 day (say from 9/17 to 9/16). Now, there is some criteria for this to happen:
    1. An value must be modified that has not previously been modified in the record.  An example would be "Temperature", this is a required INT.  If I start a record and leave it at 0, Save, then go back into the record and add a value and
    Save, the date on the record is automatically changed back a day.
    Here's the kicker... the date change is only visual, the date value in the DB has not changed.  As soon as I hit F5 on my browser the date is correctly updated back to what was originally saved.
    The app does not have any events happening in the Updated/Updating/Inserting/Inserted methods.  The date is automatically added in the _Created event for the DB Entity.
    (this happens in both debug mode and when published to an Azure website).

    Hi!
    I've been having the exact same problem and unfortunately the workaround proposed above did not fix the issue or this workaround (from http://stackoverflow.com/questions/28483086/datetime-textbox-in-lightswitch-html-increments-one-hour-on-save/28491688#28491688)
    // Open msls-2.5.2.js
    // Locate this section of code:
    entitySet._loadedEntities[entityData.__metadata.uri] = entity;
    } else if (entityState === _EntityState.modified) {
    originalEntityData = entityData.__original;
    $.each(entityDetails.properties.all(), function (j, property) {
    // You need to add:
    convertDatesToLocal(changeResponse.data);
    // Example:
    entitySet._loadedEntities[entityData.__metadata.uri] = entity;
    } else if (entityState === _EntityState.modified) {
    convertDatesToLocal(changeResponse.data);
    originalEntityData = entityData.__original;
    $.each(entityDetails.properties.all(), function (j, property) {
    // Hope this helps.
    One fortunate thing is that the change is only 'visual'.. so I'm okay with it for now although I would love to have a fix for this until I wait for VS 2015.
    Thanks,
    Mani

  • VERY weird startup issue...

    I've never heard of this happening to anyone before and I'll try my best to describe it.
    I have a g5 dual 1.8 running the latest 10.4.
    The issue is that the computer starts up...goes to the load screen with the blue bar. It reaches the end, then stops. It doesnt continue to load the finder. But I can adjust my volume from the keyboard and move the mouse around and even get a system noise when I do optioncommandescape.
    AND i tried connecting my old G4 (which im using now) to network to the g5 and I can log in and see all my files like nothings wrong at all.
    I've had small issues for a while now, so I tried to run Norton on it. I booted off the Norton disk, ran disk doctor and it always cancels out at the same point. Attributes B-Tree is where it errors out and says Norton can't fix it, please try again. Say something about Node 2, Record 0, incorrect Key.
    I tried starting safe mode...it ignores it and does the hanging load screen. I tried single user mode and running fsck. It goes through a list of hundreds of missing thread counts or something and then says disk verification failed. It never said anything about modifying or anything that the apple.com help page said.
    So, anyone ever have this happen or know whats going on? Sorry for the long post but I tried to give all the details I could.
    Thanks!
    Kevin

    Yeap, you have a bad/corrupt OS that renders your mac unable to boot up properly.
    Either:
    a) get Disk Warrior, boot with it and repair your Directory
    Use this method first, it "always work", at least over 90% (approx) of all system errors, if this still doesn't work, then you'd have to
    b) boot from the OS disc, first repair everything first, then reinstall your OS using Archieve and Install, it will install a new fresh Systems folder but preserve everything else, your Home folder, your applications etc.
    Finally, stay away, no, throw away your Norton Utilities, it WON'T work with OS X
    Cheers

  • Very weird connection issue

    Ok. Got a new one.
    This is Safari 3.1.1 PPC, running on a PowerBook G4, 10.4.11. The machine is definitely connected to the Internet. I receive email, and Firefox is working flawlessly.
    But Safari can't open any webpage, I have trashed Safari itself and all files in the ~/Users/Library/Safari folder (keeping my bookmarks file on the desktop temporarily). I then reinstalled Safari by downloading a new copy from the Apple website, and installing from scratch.
    Same problem with the new install.
    Any ideas?

    Heh. I got you all stumped??

  • Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

    The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
    I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,!  I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
    PLz tell me why! How to deal with it !

    Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

  • Date issue while transfering pics from macbook to external drive

    Hello
    I am transferring pictures from my Macbook to an external hard drive and my issue is that the date of the picture (date of creation/modified) is being replaced by the date of the transfer… So let say that all my 2013 pictures have now the date of today – 19th June 2014. I tried to drag the pics as well as to export them but I am getting the same issue. I am doing transfers regularly and it is the first time I encounter this issue. Funnily enough it works when I drag one picture at a time but not for more than 3 pictures – very weird.  Your help will be very appreciated !

    There are two kinds of metadata involved when you consider jpeg or other image file.
    One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
    The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
    Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
    Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
    When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
    However, the Photo Date doesn't change.
    The problem is that the Finder doesn't work with Exif.
    So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

  • Data issue in IDOC

    Hi Experts,
    I do the following steps to generate IDOC for Passing over payroll data to ADP.
    I run the payroll and Run the coombined Payroll export and go to WE05 to chk for idoc.
    I have some data issue here. I need the IDOC to Pick 0167 infotype information. For few employees if does generate but for few it does not generate the info in IDOC. Please help me as to how to navigate this problem as iam very new to payroll and as weel as IDOc's.
    Thanks
    Chowdary

    Hello,
    Please try your luck with this.
    Go to BD87 see the error message why this idoc is not moved. some time retrying will you success.
    else also you find the problem in the error message.
    thanks

  • I'm using iphone 4S, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. can someone help.

    I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
    Thanks in advance

    Hi Eidda,
    This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
    Mac OS X Mail: What is a winmail.dat attachment?
    http://support.apple.com/kb/HT2614
    -Griff W.

  • IPad Air running 8.2 - one of the two cameras shows very weird colors.

    This started a couple weeks ago. The outward camera view shows very weird colors. I have looked on line for a solution and found a reference that said the 'live camera filter is stilled turned on' but I don't think live filters exist any more. ive tried everything I can think of. Attached is a screen shot when using the camera.
    TIA

    Try the standard troubleshooting steps in this order:
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
    Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
    See here: https://support.apple.com/en-us/HT201252
    If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

  • Why is the signal at my home so much weaker than when I moved here in February 2013?  I only get one or two bars and very poor data service if any at all.

    Why is the signal at my home so much weaker than it was when I moved here in February 2013?  I get only one or two bars and very poor data service if any at all.  Calling to ask the question results in a vortex of questions that have little to do with the problem and no  resolution or answer.

    I have a Droid Ultra phone.  The signal reduction seems to only be in the general area of my home.  If I go downtown, the signal improves to what it once was at home.  Everything at my home is as it was when the signal was good, including cable TV service.  There has been no new construction in the area that I know of.
    Thanks for trying to resolve the issue.  Just this morning while trying to view web pages, I found that I could not load any.
    Ron

  • Weird "date change" glitch...?

    I had a bunch of pictures with the wrong dates, but only off by a couple of days... so, thinking I was smart I tried to "merge" the events. Obviously, that didn't change the dates.
    So, in the new events I tried to select all the pics and changed the date. Only, it didn't work. The change actually PUSHED or PULLED the dates by a set number of days, based (I guess) in the first photo in the event) so only a couple of the pictures ended up with the correct date. Very weird.
    I've used both "change date and time" and "batch change"... but still the same result.
    This makes no sense... and is really frustrating. Any ideas?
    tia,
    e

    So, in the new events I tried to select all the pics and changed the date. Only, it didn't work.
    Of course it worked - you said to change the date on all the photos and it did
    What you want to do is select the photos with the incorrect dates and (assuming that they all or off by the same amount) use the adjust date and time command in the iPhoto Photo menu - it will modify the dates for the selected photos by the delta between the first photo's date and time and the new one you select.
    Batch change either sets all selected photos to the exact date and time or sets the first one to the selected date and time and then adds a fixed increment to that for each successive photo depending on the option you choose
    LN

Maybe you are looking for