VF06 not creating invoices for some customers

Hi,
We generate billing documents every night. For some reason VF06 is not creating invoices for a particular customer. All these are Delivery related billings. I checked the Job log and VF06 has supplied the correct parameters to VF04. The billing index (VKDFS) is correct. There is no error in the Sales Order or Delivery. In fact when I use the simulation on VF04 I can see that SAP correctly displays this data. I was even able to create invoices using VF01.
The billing index for this customer is getting accumulated and invoices are not being created. Any help will be appreciated. We are on ECC 5.0
Thank You,
sckr

Check if some invoicing calendar is defined in the payer customer master, since the VF06 bills only the deliveries of the customers that have no invoicing calendar OR the the right date.
regards
Roberto Mazzali
Pls. reward if helpful

Similar Messages

  • VL10G is not creating delivery for some of the confirmed scheduled lines

    Hi, I was trying to find the reason why we are getting a very generic error message (Message type V50R ID 036 - The document could not be delivered.) for some of the confirmed schedule lines when executing VL10G in batch and no delivery document is created. Those orders have confirmed scheduled lines and inventory has confirmed to have stock. However, when the VL10G is executed in background, the sales order line items will be captured into the list but when creating delivery, the systems is showing the above error message.
    From debug, found out the message is generated from LV50R_VIEW43.
    We went through lots of OSS notes but nothing seem to ring a bell here. We are using ECC6, list type = index list.
    The error message is very inconsistent. The same documents will be dropped for delivery after several days without any change to any of the sales document or inventory level.
    Some of the note mentioned the parallel processing lock on ATP check for the material may be the reason for the error however we are not using any parallel processing in VL10G. We also checked the index table VEPVG has all correct entries and all the entries are being selected into the delivery due list. Error happens when the delivery is trying to be created.
    Any advice is appreciated.
    Thanks.

    Hi ALL,
    Any suggessiton on the below issue.
    We have batch jobs to process the DDL for the STOs, but some of the line items of the same STO is not picked up by batch job, (VL10B is assigned in the batch job, i checked the variant and configuration, everything seems to be fine, when i try to process the DDL through VL10B manually by giving the STO number only, the VL10B program is not picking the STO, but the same STO can be processed through VL10D, what could be the problem and why the VL10B program is not recogonizing the STO for the delivery creation.
    We are using ECC 6.0
    Regards,
    Rajesh.R

  • Do not get printouts for some custoemrs through background job

    Hi ,
    I am getting the printouts through back ground jobs, suppose what ever the billing documents by end of the day and there is back ground job which runs and give the print outs for that i have maintained in VV31 medium 1 printout and dispatch time 1 periodical scheduled back ground job. Now i want to for some customers i don't want to get the printouts through back ground job.
    Can you please suggest me how to control do not print for some customers.
    Regards
    Venkat

    Hi Sri nath,
    I have one access sequence for the combination sales org/dist channel/billing type and have maintained in vv32  sales org ,dist,billing type for that access sequence and medium is print out and dispatch time is 1 schedule back ground job
    and now i created one more table which is combination of  sales org/billing type/customer and medium is 1 and dispatch time 4 maintained in the vv32.
    what ever the customer i maintained in vv32 for the new combination. after i created sales order and now creating the billing document even though output is triggering first combination which is background job, but i want  to trigger 4 when saved application.
    can you please suggest how to resolve this issue.
    Regards
    Venkat

  • Could not create JCOClientConnection for logical System:

    Hi,
    I am facing a wierd problem in using the JCO destinations.
    I created a page where it is using some JCO destinations say SAP_R3_HumanResources.
    when i open the page it is working for the first time .without closing the page if i open the same page again it is giving the following error
    Error connecting using JCO.Client: null
    Error connecting using JCO.Client: null
    Pernr:Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.swissre.CustomData. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
    Please let me know how to solve this issue
    Thanks
    Bala Duvvuri

    Hi Bala,
    It seems that this is a custom webdynpro application which when executed causes such problem.  This might be due to JCO connection not released back to the pool.
    Please refer to the following threads and that might be helpful. 
    Re: JCO Connection close
    How to close a model object connection for Adaptive RFC?
    You might have to call disconnectIfAlive method on your model.
    Regards,
    Jigar

  • Could not create JCOClientConnection for logical System: SAP_R3_HumanResour

    Hi,
    For all the standard ESS (sap.com) the JCo connection used is SAP_R3_HumanResources .
    All the applications are working fine.
    I am trying to add a test Component in one of the (sap.com~eepro) for testing a standard BAPI call for getting user details.
    I have used the same Model and the same SAP_R3_HumanResources destination name.
    But i get the following error when i try to execute the standard BAPI_USER_GETDetails (non - HR).The other applications for standard components (Vc ) work when i run the application.
    My question here is why a custom , local webdynpro when try to make a RFC call using the running already existing JCO connection throws such error.
    How could this be solved.Note the connection is running and working fine for all the ESS webdynpros!!
    Error:
    Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.test.hr.model.Test. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
    Your experience would be worthy enough.
    Regards,
    Swathi

    Hi Swathi,
    Here are some suggestions to trace down to the actual problem.
    1) First check if all users are having this issue. (All other applications working and only one application giving problem)
    2) If no, then take list of users having this problem and check their portal and SAP accounts
    3) If yes, then concentrate on testing the JCo connections and the user account mapped in JCo settings
    Possible things u can check is user's portal account (locked or not), SAP account (lock or validity), pernr mapped (validity), JCo user (check for lock), ping and test JCo connections
    If none of them are issue, check the logs if there are any trace for this issue. I believe there must be certainly one. That can help u going further.
    Regards,
    Harini S

  • Could not create mountpoint for SC

    Hi..
    For customising the ESS package I have installed and configured NWDI , Now after configuring the CMS when I try to "import configuration" I get the following error.(But some links are seen under the tracks in active and local dc's)
    com.sap.tc.devconf.SyncException: Could not create mountpoint for SC in compartment saphr.com_ESSMSSCOMP_1: Could not create remote path /dtr/ws/ESSMSSTR/saphr.com_ESSMSSCOMP/cons/inactive/SCs/saphr.com/ESSMSSCOMP/_comp/TopLevelDCs/ (Internal Server Error [(pre||post)-condition failed: Internal Server Error]).
    And when I try to delete the track(remove configuration) I get the following error
    com.sap.tc.devconf.SyncException: Unable to remove local file or folder. Error when asking for folder item "D:\Documents and Settings\k.mukundan\.dtc\1\SCs\saphr.com\ESSMSSCOMP\_comp\": Getting VFS manager for client J2E_ESSMSSTR_D failed: Activity report (get open activities for current repository and user) failed: Internal Server Error
    it was also written in some of the thread that it was the problem with 2004 server
    Is there a solution?
    Could some one please help me with this...
    Thanks in advance

    Hi Krishnagopal,
    make sure you have the JDI roles assigned, assign yourself the Administrator and Developer role. see if this makes a difference.
    Raj

  • Create Invoice for multiple deliveries

    Hi ,
    I want to create Invoice for multiple deliveries thru my prog.
    I tried using RV_INVOICE_CREATE but it creates multiple invoices if I enter multiple deliveries.
    I tried searching the forum but cud not get any solution for this.

    Hi,
    U can create single invoice for multiple deliveries if the following conditions are met
    1)payment terms are same
    2)billing dates are all same
    3)and Payer
    Go to VF01 and enter all the delivery document numbers and it will create a single invoice.
    Or else goto VF04 and search all delivery documents,select it and click on collective billing document button. One single invoice will be created
    regards.

  • Downloading artwork - "could not get artwork for some albums"

    This might have been addressed before, but I browsed the forum and couldn't find a thread. Sorry if it's been gone over several times.
    I live in Turkey and I've added albums to my iTunes. I checked the box in the Get Info next to Artwork and I selected Get Album Artwork from the Advanced tab. It scans through all the albums and then says "could not get artwork for some albums." "Some" albums means all of them actually. And the error tab details say "artwork not available." I also tried getting artwork by right clicking on a single album but I get the same error. Before it was a 609 error. Now it just says not available.
    I logged out of the store, quit iTunes, loaded it again, re-signed in to the store and tried to get artwork that way, but got the same result. No artwork. The albums are things like Let It Be, Allman Brothers, Ella Fitzgerald... Albums that should certainly have artwork available.
    I'm using Windows Vista.
    Has anyone had and conquered this problem? Any ideas on what I should do? I have 300+ albums, so getting the cover art from wikipedia would be a bit tedious. I'd appreciate any help anyone can give!

    Hello, Welcome to Apple Discussions.
    Are your songs from Audio CDs or iTunes Store? If not you may need to manually find the album artwork for them as these songs may not be listed in the iTunes Store database for your region.
    iTunes: Album art may not download properly
    http://support.apple.com/kb/TS1815
    iTunes will only download album artwork for songs that it can find in the iTunes Store. iTunes will check each song in your iTunes library and attempt to match it up with a song in the iTunes Store. If the data matches, iTunes will download the album artwork from the iTunes Store and add it to the song in your iTunes library. If iTunes does not find a particular song's artwork in the iTunes Store, you will not see an alert message. iTunes simply does not download artwork for that song.

  • I do not have an apple computer,  I have had Itunes  Previously but had not used it for some time.  when I try to use it now the following message keeps coming up no matter how many times  install Itunes.  "The Itunes library is locked on a locked disc ?

    I do not have an Apple computer,  I have had Itunes previously but had not used it for some time,  I have Itunes gift cards but can not get ,on to use them.  I have tried to download Itunes again but the following keeps poping up, "The Itunes library is locked on a locked disc, oryou do not have write permission for this file."  How can I overcome this?

    To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file.  Once the file was deleted I was able to open iTunes without difficulty.  Note that I am running Windows 8.  Hope this helps!

  • Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

    Hi ,
    I am getting the below error:
    Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
    Regards
    Anumit

    Anumit,
    when will you get this error?
    if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
    if it doesnot work
    try to reimport the certificate or restart the server
    Thanks
    Bala Duvvuri

  • My iTouch will not restore becuase for some reason it won't reconize it. I merely tried to update it with the newest software and every thing went to sh--. Now it is just stuck on the screen showing the apple sign. Can anyone help me.

    My iTouch will not restore becuase for some reason it won't reconize it. I merely tried to update it with the newest software and every thing went to sh--. Now it is just stuck on the screen showing the apple sign. Can anyone help me.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

    please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

    See https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
    Since you have a Intel Mac, if you can upgrade to OSX 10.5.x then you may be able to use more current releases.
    jscher2000, You should link to http://www.mozilla.org/en-US/firefox/all-older.html for 3.6.28 since the ftp is not mirrored.

  • Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA

    Hi,
    I am facing a big problem...I have created WebDynpro Application & when I am running that application from WebDynpro, it's showing the page but giving me the error message as:-
    Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA - Model: class com.bcone.bcool.musa.model.MUSABAPI. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
    What do I do? what connections I have to check?
    pls help.

    Hey if you are connecting to SAP system making use of adaptive RFC model you hav to create logical systems(JCOs).So while creating the model you have to specify 2 logical system names(one for model data or on for the meta data).If you have not created the JCOs or if the JCOs are not active  then you are going to get this type of error.To activate those JCOs ask your administrator to activate the JCO for metadata of your application.If you are having proper credentials then log on to portal
    System administration>webdynpro>expand the local directory>select your project>click on maintain JCOs and activate the JCO for the metadata.
    Or else change the logical system in your application.

  • Can you play this url? (JMF error 'could not create player for')

    Hello,
    I can play this url in Windows Media Player
    http://anon.vht.com.edgesuite.net/dl/deg18-062405-2425.wmv
    However when I try to play it in JMStudio 2.1.1e, I get error "could not create player for deg18-062405-2425.wmv"
    Any help appreciated,
    thanks,
    Anil

    please login and vote for this bug to be fixed - 4 years old!!!
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4670412

  • NW2004s SP9 Java Trial - "Could not create mountpoint for SC in ..."

    Hi
    I have installed the Sneak Preview NW2004s SP9 Java Trial on a W2003 Server Macheine and everything is looking fine.
    When trying the Tutorial 2: “Development with a Track“ it cames to the point where i have to Import a Development Configuration from the SLD. I get the error:
    Could not create mountpoint for SC in compartment chynet.at_APPLICATION_1: Could not create remote path /dtr/ws/APPL/chynet.at_APPLICATION/dev/inactive/SCs/chynet.at/APPLICATION/_comp/TopLevelDCs/ (Internal Server Error [(pre||post)-condition failed: Internal Server Error]).
         at com.sap.tc.devconf.impl.DTRClientErrorMapper.toSyncException(DTRClientErrorMapper.java:65)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2758)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.createMountPointsForSCs(DevelopmentConfiguration.java:3046)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.goOnline(DevelopmentConfiguration.java:5207)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:773)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:698)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:669)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:505)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
    Can anybody tell me what is going wrong or where i can investigate the error?
    LG
    Michael

    Hi There !
    Run SDM RemoteGui.
    Log in.
    Go to deployment tab.
    Find sap.comtcdtr~dbschema.sda in root directory under SDM.
    Adjust deployment configuration to Update deployed SDAs/SCAs that have any version.
    Complete the wizard.
    this works !
    rajendra

Maybe you are looking for