VF06 not working for drop ship orders

Hi All,
We use VF06 for creating billing docs. Interesting it works good for all order/delivery types but does not create any billing document for third party sales orders. I have flagged both - order related and delivery realted document indicators and leaving all the selection inputs blank except for the sales org. When we try to create the invoice for a drop ship order, it gets created but surprisingly does not get picked up in VF04 or VF06.
Any help would be appreciated.
Thanks & Regards,
Vidya

Hi,
I did go through some notes and could find out the problem. In copy controls we have set the billing quantity to F to enable billing even if GR is done for the PO and need nt have the Vendor Invoice Recipet to be done. SAP says in some notes that if this is set, then the billing due list will not have the order displayed even if it can be manually invoices. But I dont have any idea how to overcome this. SAP has provided standard reports but somehow these reports are not working for me.
Thanks & Regards,
Vidya

Similar Messages

  • Form Personalization is not working for copied Sales Orders

    Hi All,
    We have a requirement in Sales Order form, if the order type is "Standard" then Ship method field should be mandatory.
    We were able to do this using below form personalization, it is working for new order creation.
    When we did the below testing it is not working
    Inactivated the ship method and try to copy the order with Standard type the field remains mandatory and null but still it is allowing to book the Sales Order.
    Please help to sort out this issue, let me know if it is not clear
    Condition
    Trigger Event : WHEN-NEW-ITEM-INSTANCE
    Trigger Object: ORDER.SOLD_TO
    Condition:
    (:ORDER.ORDER_TYPE not like '%STANDARD%')
    Action
    Type : Property
    Object Type : Item
    Target Object : ORDER.SHIPPING_METHOD
    Property Name: REQUIRED
    Value: True
    Thanks,
    CSK

    Hi CSK,
    try it in well validate item trigger.
    If that order type is list then you may disable the field in WHEN LIST CHANGED  trigger itself.
    Hope it will work,
    Regards,
    Soofi

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

  • When running the workflow background process for drop shipment order, sale order line's status gets automtically closed instead of awaiting shipping

    Hello friends,
    I am created a drop shipment order with all the setups done . now i have booked the sale order as source type external. but when i run the workflow background process , after completing the report when i check the sale order line status it changes to "closed" instead of "awaiting shipping".
    Plz guide me if i have missed something in the setups.
    thanks,
    Sachin

    Hi Sachin,
    pls check the below notes from MOS
    Drop Ship Sales Order Cycle In Order Management (Doc ID 749139.1)
    Vision Demo - How To Create A Drop Ship Sales Order/Purchase Order (Doc ID 1060343.1)
    Thanks
    -Arif.

  • LSMW For Converting Open Sales Orders (not working for more than 1 item)

    Hi,
    I am using following standard object for Open sales orders .
    Object               0090   Sales documents                   
    Method               0000                                     
    Program Name         RVINVB10                                 
    Program Type         D   Direct Input                         
    Its not working for more than 1 line item.
    For more than 1 line item its giving Error saying that
    '102122                         V1                   845
    Print parameter SAPML2 1 is not defined
    Can anybody help me out in this regard.
    Thanks in advance.
    Nitin.

    hello, friend.
    i will still research the subject.  but the first thing that comes into my mind is t-code VA05.  with this, you have the option to change the Plant en masse.  so a possible workaround is for you to list a number of sales orders using VA05.  you then sort the line items by Plant.  choose all items with the same plant, change the plant via mass change... then change back to the original plant.  hopefully, the new settings should apply.
    do test a few sales orders by doing this for a larger scope.
    regards.

  • Allow Custom Text Entry for Drop down not working For Dynamic form

    Dear All,
    In drop down field Allow custom text entry is working fine if the form is save as a static pdf form file.But if the form is save as a Dynamic pdf form file it is not working.I can enter custom text in drop down field but after filling it up when I click on next field the text from the drop down is disappearing.
    If any body can please help me to solve this problem.
    Thanks a lot in advance
    Regards
    Rakesh

    Dear Jimmypham,
    Thanks a lot for your quick response.But it's not working for me.I have even tried with a form having only single field and save it as a dynamic pdf file.In that form also it's not working.The text which I have entered is disappearing when I click outside of this field.
    Can you please help me to find out the solution for this problem.
    Regards
    Rakesh

  • Defaulting Rules Not Working for Repair Orders in OM?

    Hi,
    Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
    But in our project we are using  Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
    Please help me to solve this issue ASAP.
    Thanks,
    Kishor

    Hi,
    You have like this:
    1. Price list
    2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    You have to make
    1. XXOE_DEFAULT_PVT.custom_code
    2. Price list
    3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    Did you made own custom code to pick currency?
    Regards,
    Luko

  • Drop ship & Non Drop Ship order differentitation

    Folks
    1. How do I differentitate a Drop ship & Non Drop Ship order by looking at the SO Items ?
    2. Which parameters drive whether a SO item is a drop ship or Non Drop ship item
    3. Can a SO have both drop ship and non drop ship items ?
    Thanks

    Hi Dear,
    Following is the SQL for Drop Ship I have. I think it will be useful to you and make necessary changes as per your requirements.
    begin
    fnd_client_info.set_org_context('p_org_id');
    end;
    select ooh.ordered_date, ott.NAME order_type, ooh.order_number, ooh.TRANSACTIONAL_CURR_CODE so_curr_code, --ooh.order_type_id,
    arc.customer_name, ooh.cust_po_number, --ool.inventory_item_id,
    ool.line_number so_line_number, ool.ordered_item, msi.DESCRIPTION item_description,
    ool.ordered_quantity, ool.unit_selling_price, --ods.PO_HEADER_ID,
    (ool.ordered_quantity* ool.unit_selling_price) ordered_value,           
              poh.segment1 po_number, poh.CURRENCY_CODE po_curr_code, poh.CREATION_DATE po_date,
              pov.VENDOR_NAME, pol.LINE_NUM po_line_num, pol.QUANTITY po_quantity, pol.UNIT_PRICE po_unit_price,
    (pol.QUANTITY * pol.UNIT_PRICE ) po_value, pol.closed_code po_line_status, pll.QUANTITY_BILLED          
    from oe_order_headers_all ooh, oe_order_lines_all ool, oe_transaction_types ott, mtl_system_items msi, ar_customers arc, OE_DROP_SHIP_SOURCES ods,
    po_headers_all poh, po_lines_all pol, po_line_locations_all pll, po_vendors pov
    where-- ooh.ordered_date >= '01-JAN-11'
    ooh.org_id = :p_org_id
    and ool.header_id = ooh.header_id
    and ool.flow_status_code = 'AWAITING_RECEIPT'
    and ool.source_type_code = 'EXTERNAL'
    and ott.TRANSACTION_TYPE_CODE = 'ORDER'
    and ott.TRANSACTION_TYPE_ID = ooh.ORDER_TYPE_ID
    and msi.INVENTORY_ITEM_ID = ool.inventory_item_id
    and msi.ORGANIZATION_ID = ool.SHIP_FROM_ORG_ID
    and arc.customer_id = ooh.sold_to_org_id
    and ods.LINE_ID = ool.LINE_ID
    and ods.PO_HEADER_ID IS NOT NULL
    and poh.PO_HEADER_ID = ods.PO_HEADER_ID
    and pol.PO_HEADER_ID = poh.PO_HEADER_ID
    and pol.PO_LINE_ID = ods.PO_LINE_ID
    and pll.PO_HEADER_ID = pol.PO_HEADER_ID
    and pll.PO_LINE_ID = pol.PO_LINE_ID
    and pov.VENDOR_ID = poh.VENDOR_ID
    order by ooh.ORDERED_DATE, ooh.ORDER_NUMBER, ool.LINE_NUMBER
    HTH
    Sanjay

  • Auto_lexer (stemming) not working for other languages(other than english)

    Hi All,
    We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
    But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
    Following is the code for AUTO_LEXER creation:
    CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
    lang_index VARCHAR2(3),
    content_text CLOB,
    CONSTRAINT test_auto_lexer_pk primary key (pkey))
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (1,'eng','I drive a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (2,'eng','I drove a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (3,'eng','I have driven a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (4,'eng','Just check for other things')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (5,'eng','always drive a car')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (6,'eng','it is nothing')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (7,'ger','Ich fahre ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (8,'ger','Ich fuhr ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (11,'ger','immer Auto fahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (12,'ger','es ist nichts')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (13,'ger','sprechen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (14,'ger','sprach')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (15,'ger','gesprochen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (16,'ger','tale')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (17,'ger','Indlæg')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (18,'ger','tales')
    BEGIN
    ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
    END;
    CREATE INDEX test_auto_lexer_ix1
    ON test_auto_lexer(content_text)
    INDEXTYPE IS ctxsys.context
    PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
    select to_char(content_Text) from test_auto_lexer where contains(content_text,
    '<query>
    <textquery lang="ger" grammar="context">
    $fahren
    </textquery>
    <score datatype="integer"/>
    </query>') > 0
    this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
    Could any one help me with this, in case I am missing something here. I would be really thankful.
    Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

    In the future, please begin a new thread for a new question and provide a link to a related question.
    According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
    Basic_lexer attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
    Basic_wordlist attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
    Also, please see the following note:
    Features not available in 11.2.0.3:
    http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
    "Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
    Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
    I don't work for Oracle, so I don't know why they do things the way they do.
    So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
    -- demo:
    SCOTT@orcl_11gR2> select * from v$version
      2  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    5 rows selected.
    SCOTT@orcl_11gR2> select value from v$nls_parameters
      2  where  parameter = 'NLS_CHARACTERSET'
      3  /
    VALUE
    AL32UTF8
    1 row selected.
    SCOTT@orcl_11gR2> DROP TABLE news
      2  /
    Table dropped.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> CREATE TABLE news
      2    (pkey            NUMBER,
      3       lang            VARCHAR2 (2),
      4       short_content  CLOB)
      5  /
    Table created.
    SCOTT@orcl_11gR2> INSERT ALL
      2  INTO news (pkey, lang, short_content)
      3    VALUES  (1, 'en', 'I drive a bike.')
      4  INTO news (pkey, lang, short_content)
      5    VALUES  (2, 'en', 'I drove a bike.')
      6  INTO news (pkey, lang, short_content)
      7    VALUES  (3, 'en', 'I have driven a bike.')
      8  INTO news (pkey, lang, short_content)
      9    VALUES  (4, 'en', 'I always drive a car')
    10  INTO news (pkey, lang, short_content)
    11    VALUES  (5, 'en', 'This is nothing')
    12  INTO news (pkey, lang, short_content)
    13    VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    14  INTO news (pkey, lang, short_content)
    15    VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    16  INTO news (pkey, lang, short_content)
    17    VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    18  INTO news (pkey, lang, short_content)
    19    VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    20  INTO news (pkey, lang, short_content)
    21    VALUES  (10, 'de', 'Es ist nichts.')
    22  SELECT * FROM DUAL
    23  /
    10 rows created.
    SCOTT@orcl_11gR2> BEGIN
      2    -- word list:
      3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
      5    -- english lexer:
      6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      7    -- german lexer:
      8    ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      9    ctx_ddl.set_attribute      ('german_lexer',  'composite',       'german');
    10    ctx_ddl.set_attribute      ('german_lexer',  'alternate_spelling', 'german');
    11    ctx_ddl.set_attribute      ('german_lexer',  'mixed_case',       'no');
    12    ctx_ddl.set_attribute      ('german_lexer',  'base_letter',       'yes');
    13    -- multi_lexer:
    14    ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
    15    ctx_ddl.add_sub_lexer      ('global_lexer',  'default',            'english_lexer');
    16    ctx_ddl.add_sub_lexer      ('global_lexer',  'german',            'german_lexer');
    17  END;
    18  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create index search_news
      2  on news (short_content)
      3  indextype is ctxsys.context
      4  parameters
      5    ('lexer            global_lexer
      6        language column  lang
      7        wordlist       my_wordlist')
      8  /
    Index created.
    SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
      2  /
    Session altered.
    SCOTT@orcl_11gR2> set timing on
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drive') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drove') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
      2  /
    Session altered.
    Elapsed: 00:00:00.01
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fahr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.07
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fuhr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
    select * from v$version
    select value from v$nls_parameters
    where  parameter = 'NLS_CHARACTERSET'
    DROP TABLE news
    EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    CREATE TABLE news
      (pkey           NUMBER,
       lang           VARCHAR2 (2),
       short_content  CLOB)
    INSERT ALL
    INTO news (pkey, lang, short_content)
      VALUES  (1, 'en', 'I drive a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (2, 'en', 'I drove a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (3, 'en', 'I have driven a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (4, 'en', 'I always drive a car')
    INTO news (pkey, lang, short_content)
      VALUES  (5, 'en', 'This is nothing')
    INTO news (pkey, lang, short_content)
      VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (10, 'de', 'Es ist nichts.')
    SELECT * FROM DUAL
    BEGIN
      -- word list:
      ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
      -- english lexer:
      ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      -- german lexer:
      ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      ctx_ddl.set_attribute     ('german_lexer',  'composite',          'german');
      ctx_ddl.set_attribute     ('german_lexer',  'alternate_spelling', 'german');
      ctx_ddl.set_attribute     ('german_lexer',  'mixed_case',          'no');
      ctx_ddl.set_attribute     ('german_lexer',  'base_letter',         'yes');
      -- multi_lexer:
      ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'default',             'english_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'german',              'german_lexer');
    END;
    create index search_news
    on news (short_content)
    indextype is ctxsys.context
    parameters
      ('lexer            global_lexer
        language column  lang
        wordlist         my_wordlist')
    EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    COLUMN short_content FORMAT A30
    ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
    set timing on
    select * from news
    where  contains (short_content, '$drive') > 0
    select * from news
    where  contains (short_content, '$drove') > 0
    ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
    select * from news
    where  contains (short_content, '$fahr') > 0
    select * from news
    where  contains (short_content, '$fuhr') > 0
    /

  • Cascading Select Lists - Not Working for me

    I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
    http://apex.oracle.com/pls/otn/f?p=31517:119
    But it is not working for me.
    I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
    "Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
    having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
    getting the expected results.
    I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
    user selects a country I would like to show the list of states within that country.
    This is what I've done so far:
    Defined an application process:
    Process Point: On Demand: Run ... by a page process.
    Name: CASCADING_SELECT_LIST1
    Process Text:
    BEGIN
    OWA_UTIL.mime_header ('text/xml', FALSE);
    HTP.p ('Cache-Control: no-cache');
    HTP.p ('Pragma: no-cache');
    OWA_UTIL.http_header_close;
    HTP.prn ('<select>');
    HTP.prn ('<option value="' || 99 || '">' || '- All States -'
    || '</option>'
    FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
    FROM tbk_state
    WHERE country_code = :cascading_selectlist_item_1)
    LOOP
    HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
    END LOOP;
    HTP.prn ('</select>');
    END;
    defined and application item:
    Name: CASCADING_SELECTLIST_ITEM_1
    Build Option: - No Build Option -
    Created a 'Form on a table with report' as follows:
    Page 5: Report on TBK_HARDWARE_LOCATION
    Page 6: Form on TBK_HARDWARE_LOCATION
    in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
    <script language="JavaScript" type="text/javascript">
    <!--
    htmldb_delete_message='"DELETE_CONFIRM_MSG"';
    //-->
    </script>
    <script>
    function get_select_list_xml1(pThis,pSelect){
    var l_Return = null;
    var l_Select = html_GetElement(pSelect);
    alert ('Dept no=' + pThis.value);
    var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
    'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
    get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
    gReturn = get.get('XML');
    // gReturn = get.get();
    alert('Enames=' + gReturn);
    if(gReturn && l_Select){
    var l_Count = gReturn.getElementsByTagName("option").length;
    l_Select.length = 0;
    for(var i=0;i<l_Count;i++){
    var l_Opt_Xml = gReturn.getElementsByTagName("option");
    appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
    l_Opt_Xml.firstChild.nodeValue)
    get = null;
    function appendToSelect(pSelect, pValue, pContent) {
    var l_Opt = document.createElement("option");
    l_Opt.value = pValue;
    if(document.all){
    pSelect.options.add(l_Opt);
    l_Opt.innerText = pContent;
    }else{
    l_Opt.appendChild(document.createTextNode(pContent));
    pSelect.appendChild(l_Opt);
    </script>
    On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
    Name: P6_COUNTRY_CODE
    Display as: Select List
    HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
    Source Used: Only when current value in session state is null
    Source Type: Database Column
    maintain session state: Per session
    Source value or expression: COUNTRY_CODE
    Named LOV: LIST OF COUNTRIES
    Name: P6_STATE_CODE
    Display as: Select List
    Source Used: Only when current value in session state is null
    Source Type: Database Column
    maintain session state: Per session
    Source value or expression: STATE_CODE
    Named LOV: - Select named LOV -
    List of Values definition:
         select state_code || ' - ' || state_desc d, state_code r
         from tbk_state
         where country_code = :P6_COUNTRY_CODE
         order by 1
    LIST OF COUNTRIES is defined as:
    select country_code || ' - ' || country_desc d, country_code r
    from tbk_country
    order by 1
    Now to the problem:
    I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
    try to select a different country I get the following error (on IE):
    "Problems with this web page might prevent it from being displayed properly or functioning properly.
    In the future, you can display this message by double-clicking the warning icon displayed in the status
    bar.
    Line: 17
    Char: 5
    Error: Object expected
    Code: 0
    URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
    p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
    I don't see any of the alert messages.
    I also tried to run the application process code in the SQL - Command Processor (I replaced
    :cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
    button, or try again later.
    Only one top level element is allowed in an XML document. Error processing resource
    'http://cmrac4.cm.timeinc.com:7777/pls/...
    <select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
    Can someone help me please?

    Varad,
    First, thank you for taking the time to try to help me with this problem.
    When I view the page's source code (here are the first few lines):
    <html lang="en-us">
    <head>
    <script src="/i/javascript/core.js" type="text/javascript"></script>
    <link rel="stylesheet" href="/i/css/core.css" type="text/css" />
    <script language="JavaScript" type="text/javascript">
    <!--
    htmldb_delete_message='Would you like to perform this delete action?';
    //-->
    </script>
    <script>
    function get_select_list_xml1(pThis,pSelect){
    var l_Return = null;
    var l_Select = html_GetElement(pSelect);
    //alert ('Dept no=' + pThis.value);
    var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
    'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
    get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
    gReturn = get.get('XML');
    // gReturn = get.get();
    //alert('Enames=' + gReturn);
    if(gReturn && l_Select){
    var l_Count = gReturn.getElementsByTagName("option").length;
    l_Select.length = 0;
    for(var i=0;i<l_Count;i++){
    var l_Opt_Xml = gReturn.getElementsByTagName("option");
    appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
    l_Opt_Xml.firstChild.nodeValue);
    get = null;
    function appendToSelect(pSelect, pValue, pContent) {
    var l_Opt = document.createElement("option");
    l_Opt.value = pValue;
    if(document.all){
    pSelect.options.add(l_Opt);
    l_Opt.innerText = pContent;
    }else{
    l_Opt.appendChild(document.createTextNode(pContent));
    pSelect.appendChild(l_Opt);
    </script>
    It looks like line 17 is:
    var l_Select = html_GetElement(pSelect);
    I'm still not sure why I'm getting this error and why it's not working?
    Thanks,
    Eti

  • Incoming Email not working for one web app, but IS working for others in same farm.

    I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates.  It works just fine for two web applications, but it will not work for one particular
    web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
    application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
    if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
    does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
    the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site.  The App Pool and Timer
    Service accounts have rights to the folder and to the library.
    The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
    The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
    ID:
    Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
    Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
    reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
    This did not fix the issue for the case mentioned above.
    What could possibly be the issue preventing incoming email from working on this one web application?

    Thanks for your reply.  Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause.  As noted, _other_ emails send to http://workingapp are working just fine.  I can send two emails - one to a library on http://workingapp
    and another on http://notworkingapp.  The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly.  In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
     So clearly, the timer job on WFE1 is running and attempting to process the file.  For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
    WRT to #1, I have done this already (as noted in the original post).  I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed.  If I return it to http://workingapp it is processed.  In other
    words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library.  I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
    the alias.  Once done, emails sent to the alias are not processed.  I then do the reverse, and it works again.
    On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
    In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp.  Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
    - the problem is bound to http://nonworkingapp
    I'm not sure what you mean by "steps to reproduce the issue".  If I knew that, I would probably be able to solve the issue.  The best I could come up with to describe the situation would be:
    Set up SP 2010 in a three-node configuration with multiple web apps
    Enable incoming email and confirm it works
    Migrate to a SP2013 SP1 farm in a three node configuration.
    Enable a new email alias for a library
    Observe that it doesn't work for one web application.
    Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

  • TANN item category item not picking for return sales order

    Hi all,
    I have a question regarding TANN item category. This TANN item category item is not picking for return sales order type. As far as i know RENN is the free goods for return sales order. Can you please clarify the above question further

    Hi
    If you are making return order by copying sales order then please see this procedure also.
    Try to check in the copy control also.
    Go to the following path IMG u2013 Sales and Distribution u2013 Sales u2013 Maintain Copy control for sales documents. (Tcode VTAA)
    Select copying control : sales document to sales document.
    Search your return delivery order from the reference sales document type.
    Then select the item from the left side Colum.
    Go and find out TANN item category and click on detail.
    Check out Item Cat proposal. If it is empty then type your RENN condition type over here.
    Now try to create the return sales order it might work.
    Raj.

  • Out of office replies in Exchange 2013 not working for external recipients

    Hi,
    Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
    I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
    to be on vacation.
    HARED... SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    RECEIVE  SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    DROP     ROUTING 
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    AGENT... AGENT    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    HARED... SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    RECEIVE  SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    AGENT... AGENT    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    TRANSFER ROUTING  [email protected]           
    {[email protected]}             Automatic reply: vacation test
    FAIL     SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test

    Hi Informus,
    Please check if it is allowed in AllowedOOFType of the Remote Domain *
    In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
    To get the currently configured Remote Domains, use:
    Get-RemoteDomain
    Name                           DomainName                                  
    AllowedOOFType
    Default                        *                                           
    External
    Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
    AllowedOOFType     : External
    AutoReplyEnabled   : False
    AutoForwardEnabled : False
    To change the settings, use the Set-RemoteDomain command.
    Enable automatic replies
    Set-RemoteDomain -AutoReplyEnabled $true
    Enable automatic forwards
    Set-RemoteDomain –AutoForwardEnabled $true
    Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
    Set-RemoteDomain –AllowedOOFType $ExternalLegacy
    To change all these properties at once, you can use:
    Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
    Note:
    Valid settings for the AllowedOOFType property are:
    External
    This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
    ExternalLegacy
    This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
    None
    This setting doesn’t allow for the use of OOF messages at all (both internal and external).
    InternalLegacy
    This setting only allows for internal OOF messages to be sent for all Outlook versions.
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • G/L A/C Determination for Drop Ship and Regular Ship of Same Item

    Hello Friends,
    We have a scenario,
    Stock is Sales order valuated stock
    For the same material, some times we do a drop shipment from vendor and some times we do a regular shipment from our plant.
    Being sales order valuated stock the GL account (On the PR generated from sales order) for drop shipment is getting picked up from BSX. (standard SAP)
    Our Finance team dont want the G/L account from BSX to be picked up.
    Because the BSX G/L account is a finish good G/L account and we dont want to use that for drop ship.
    How do we solve this issue?
    What is the standard process to get the G/L account if the same material is drop shipped and regular shipped?
    Thanks for your help.
    Thil

    Hi,
    The most common way to solve your problem is to use split valuation.
    This can be easily done. I you want to know how to use split valuation let me know I will detail steps you need to follow.
    Regards
    Srinivas

  • I have a licensed copy of Adobe Acrobat X Pro for Windows.  I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS?  Can anyone assist me with this conversion?  Best,  James.

    I have a licensed copy of Adobe Acrobat X Pro for Windows.  I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS?  Can anyone assist me with this conversion?
    Best,
    James.

    you cannot use your pc license to install on a mac.  you would need a separate license (and serial number) for that.
    adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
    your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

Maybe you are looking for