Vi fails to load on remote host

I am trying to run a vi on a remote RT pxi chassis from teststand. I have two vi's the first is very simple and runs on the RT remote host fine. The second is calling niFgen sub vi's which will not run. I get the error "failed to load vi on remote host. The vi is not executable" and I get an error -17600. However if I run this vi from labview targeting the RT system it runs fine. Also if I run the vi from Labview and then without unloading it I run my sequence this also works. Any ideas anyone?
Nick

Nick,
Any dynamic dependencies of the VI need to be on the target if you want to run it using TestStand. LabVIEW takes care of downloading the required DLLs for you, but TestStand won't.
- The first step is to make sure NI-FGEN is installed on the target.
- Try to narrow the behavior to a single VI and then open it up to see if it's making a call to a DLL, if it needs a DLL then place it on your NI-RT\System\ folder on the target and try again. If this is the case, please reply with the name of the DLL so we can take a more detailed look at the issue.
Let me know,
Alejandro

Similar Messages

  • TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

     TACACS+ configured on router and router is in ACS.  I can ping the ACS but the router cannot establish a connection to authenticate users.
    aaa group server tacacs+ hq_acs-1
    server 10.20.17.2
    ip tacacs source-interface GigabitEthernet0/0
    aaa authentication login default group tacacs+ local
    aaa authorization config-commands
    aaa authorization exec default group tacacs+ local
    aaa authorization commands 10 default group tacacs+ local
    aaa authorization commands 15 default group tacacs+ local
    aaa accounting nested
    aaa accounting update newinfo periodic 60
    aaa accounting auth-proxy default start-stop group tacacs+
    aaa accounting exec default start-stop group tacacs+
    aaa accounting commands 15 default start-stop group tacacs+
    aaa accounting network default start-stop group tacacs+
    aaa accounting connection default start-stop group tacacs+
    aaa accounting system default start-stop group tacacs+
    aaa accounting resource default start-stop group tacacs+
    BigTree_3945#sh ip int br
    Interface                  IP-Address      OK? Method Status                Protocol
    GigabitEthernet0/0         10.4.3.1        YES NVRAM  down                  down
    GigabitEthernet0/1         10.12.10.26     YES NVRAM  up                    up 
    Serial0/2/0                unassigned      YES NVRAM  down                  down
    Serial0/2/0.602            10.12.15.10     YES NVRAM  down                  down
    Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
    Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
    Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
    Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
    Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
    Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
    Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
    Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
    Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
    Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
    Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
    Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
    Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
    Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
    Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
    Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
    BigTree_3945#
    AAA Client IP Address
    10.4.3.* 10.12.15.10
    Key
    Network Device Group
    Test    
    NJT    
    AccessLink    
    (Not Assigned)    
    Authenticate Using
    TACACS+ (Cisco IOS)    
    RADIUS (Cisco Aironet)    
    RADIUS (Cisco BBSM)    
    RADIUS (Cisco IOS/PIX)    
    RADIUS (Cisco VPN 3000)    
    RADIUS (Cisco VPN 5000)    
    RADIUS (IETF)    
    RADIUS (Ascend)    
    RADIUS (Juniper)    
    RADIUS (Nortel)    
    RADIUS (iPass)    
    Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
    The 10.12.10.* range is listed under the HQ site.
    Your help is greatly appreciated.

    You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
    What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
    Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
    Are you using VRFs?
    What version of IOS?

  • Plugin Fails to install to remote host OEM 12c R2

    I am trying to get a couple of plugins to deploy to some remote hosts, but they are failing. I did the initial agent install to the servers with no problems. Now I am trying to add the Oracle Database plugin, and the E-Business Suite Plugin now. I have successfully done this before on another OEM install. Here is the output log I see:
    Calling the validateRuntimeParameters method
    PluginDeployonAgt: Plugin Deploy on Agent : validated parameters
    The target_guid is CB189EA727EA205C077F7FC2F853287B.propName : OracleHome
    propName : AgentState
    PluginDeployonAgt
    Plugin Deploy on Agent - oraHome /u01/app/Agent12c/core/12.1.0.2.0
    PluginDeployonAgt - emStateDir /u01/app/Agent12c/agent_inst
    The plugin details are :
    Agent url oracle.apps.ebs
    pluginId 12.1.0.1.0
    pluginVersion 0
    pluginRevision DISCOVERY
    pluginType {4}
    action {5}
    operCode {6}
    errorCode {7}
    errorMsg {8}
    The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
    The plugin details are :
    Agent url oracle.apps.ebs
    pluginId 12.1.0.1.0
    pluginVersion 0
    pluginRevision AGENT
    pluginType {4}
    action {5}
    operCode {6}
    errorCode {7}
    errorMsg {8}
    The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
    The exit code is -1
    I have tried resynchronizing, stop/start agents, stop/start OEM, and went as far as rebooting the OEM server. I have not tried removing the host, and agent, then trying to reinstall it.
    Any thoughts, suggestions? Thanks in advance.

    Hi,
    I have the same problem when i try to deploy patch 16466443 on remote agent via Plan.
    Step: GetHomePatchMap Error
    PatchList : 16466443
    TargetName : ------:3872
    [Apr 28, 2013 6:04:22 PM] Command Arguments:
    /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    [Apr 28, 2013 6:04:22 PM] java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission performOperation)
    [Apr 28, 2013 6:04:22 PM] Unexpected Exception: null
    on the server, this command works correctly:
    oracle@xxx $ /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    Oracle Interim Patch Installer version 11.1.0.9.10
    Copyright (c) 2012, Oracle Corporation. All rights reserved.
    Oracle Home : /oracle/agent12cr2/core/12.1.0.2.0
    Central Inventory : /oracle/oraInventory
    from : /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    OPatch version : 11.1.0.9.10
    OUI version : 11.1.0.9.0
    Log file location : /oracle/agent12cr2/core/12.1.0.2.0/cfgtoollogs/opatch/opatch2013-04-28_19-02-03PM_1.log
    Invoking utility "checkcomponents"
    The input patch(es) "[16466443]" can be applied to the following homes (1):
    /oracle/agent12cr2/core/12.1.0.2.0
    The input patch(es) "[16466443]" can be applied to the passed homes by the following command(s):
    /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch napply /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invptrLoc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
    OPatch command 'checkComponents' done.
    OPatch succeeded.
    The error occurs when I try to put any patch on the agent through the Plan
    somebody decided this issue?
    Edited by: 999966 on 28.04.2013 7:02

  • Random Bingads WSDL errors: Parsing WSDL: Couldn't load from...failed to load external entity, Could not connect to host, Parsing Schema: can't import schema from

    Hi,
    I am developing a web tool that accesses client's Bingads accounts via OAUTH2 granting. I am downloading data from clients daily.
    Generally it worked, but for 2 days I am experiencing a weird issue, that in random times (but more and more often though) I receive random error messages from Bing server. I am pasting below a few example from my logs (with timestamp and request/response).
    Must note that I launch these requests from the server where we have the webapp but also I launch it locally. The same is the result.
    The timestamp is in France time (GMT+1).
    Thanks ahead!
    Best regards,
    Steve
    2015-01-14 15:08:05: Service\BingAds::initService => SOAP-ERROR: Parsing Schema: can't import schema from 'https://reporting.api.bingads.microsoft.com/Api/Advertiser/Reporting/V9/ReportingService.svc?xsd=xsd0'
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetDetailedBulkDownloadStatusRequest><ns1:RequestId>108277125</ns1:RequestId></ns1:GetDetailedBulkDownloadStatusRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetDetailedBulkDownloadStatusResponse
    xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Errors i:nil="true" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><ForwardCompatibilityMap xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic"
    xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><PercentComplete>100</PercentComplete><RequestStatus>Completed</RequestStatus><ResultFileUrl>https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=XXX</ResultFileUrl></GetDetailedBulkDownloadStatusResponse></s:Body></s:Envelope>
    2015-01-15 05:41:39: Service\BingAds::getCampaigns => SoapFault: Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)
    2015-01-15 05:45:00: Service\BingAds::initService => SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
    2015-01-15 11:58:46: Service\BingAds::getCampaigns =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)
    2015-01-15 11:59:50: Service\BingAds::initService =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetCampaignsByAccountIdResponse
    xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Campaigns xmlns:i="http://www.w3.org/2001/XMLSchema-instance"></Campaign>........</Campaigns></GetCampaignsByAccountIdResponse></s:Body></s:Envelope>
    2015-01-15 12:05:55: Service\BingAds::getCampaigns =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)

    Hi,
    1. I am using the older version of the PHP library provided by Bing (updated on 1/20/2014), so that is doing the WSDL loadings. I initialize the proxy calling OpticoBingAdsClientProxy providing what it needs, and then do the requests.
    2. I have a cron that reads data from client's accounts. I make several calls, like get search query report, get keyword performance report, get keyword bulk data. As the script progressed the first 2 worked and the third gave error. Or in other cases the
    first request failed. The calls have quite some time in between them since I process data (sometimes even 160 seconds)
    3. I did not change the code ion terms of requests, since as I said I use the PHP library (same credentials, ...).
    As of today (2015-01-16 10:30 GMT + 2) running my script, still have the same issues.
    Thank you!
    Steve

  • Elom Java Console "Connect to remote host Fail"

    Hi,
    I'm accessing an elom over the https interface, which works fine, however when trying to launch the Java console, the app starts but a dialogue box appears stating "Connect to remote host Fail!", and quits when I click ok. I'm using:
    Kubuntu 9.10
    Firefox 3.5.5
    Java 1.6.0_15
    Elom firmware version 2.70
    I've also tried running against JRE 1.5, and tried saving the jnlp file and running that directly from javaws, all attempts produce the same result. I am able to connect to port 8890 from my machine. An strace seems to suggest that it sends and receives from port 8890 but then gets a Connection reset by peer.
    Furthermore I've also tried running it through localhost using an ssh tunnel to the elom, again, same result.
    I've now run out of ideas of what could be causing this issue, any help would be greatly appreciated.
    TIA
    Regards
    Craig

    SOLVED
    FYI, I downloaded the debian package of libstdc++5 from http://ftp.us.debian.org/debian/pool/main/g/gcc-3.3/libstdc++5_3.3.6-18_i386.deb
    After installing that on Kubuntu, the console works fine.

  • SOAP: call failed: java.io.EOFException: Connection closed by remote host

    Hi folks,
    my friday crusher:
    We have a sync RFC-PI-SOAP scenario.
    All is working fine in Dev system.
    After moving into Test following error is displayed as the SOAP response message:
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
    <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.EOFException: Connection closed by remote host.</SAP:AdditionalText>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Also Channel Monitoring says:
    Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.EOFException: Connection closed by remote host.
    Couldn´t find any hints in SDN and the web to this issue.
    Does anyone of you has made experiences with that problem?
    Maybe it´s a system parameter for time out SOAP connections....?
    Many thanks for your help
    -and-
    have a great weekend!
    Cheers
    André

    Very strange!
    But I have the solution:
    I have looked into channel monitoring / RWB again.
    There I saw, this PI is using two clusters on two application servers.
    Everytime the SOAP call is executed through the frist cluster, all was fine.
    But no SOAP call was successfully executed by the second cluster.
    Fortuity? No!
    The second cluster node / app server wasn´t registered for internet access in the used proxy server.
    So it wasn´t an PI issue.
    Now, all is fine & I´m happy!
    Thanks @all for helping!
    Cheers,
    André

  • [Solved] Ncmpcpp Visualizer Failed To Load (Blank)

    I've install ncmpcpp and mpd and I've followed each guide to enable visualization. Unfortunately I don't know what have cause it to failed to load.
    Everytime I hit '9' to reveal it, it just showing blank terminal..for your information all of my songs just played fine.
    I used config from one of our member via this thread. here is my .ncmpcpp/config:
    ##### connection settings #####
    mpd_host = "localhost"
    mpd_port = "6600"
    mpd_music_dir = "/home/drfreddy/Music"
    mpd_connection_timeout = "5"
    mpd_crossfade_time = "1"
    mpd_communication_mode = "notifications" (polling/notifications)
    visualizer_fifo_path = "/tmp/mpd.fifo"
    visualizer_output_name = "my_fifo"
    visualizer_sync_interval = "1"
    visualizer_type = "wave" (spectrum/wave)
    system_encoding = "utf-8"
    ##### delays #####
    playlist_disable_highlight_delay = "5"
    message_delay_time = "4"
    # Playlist
    song_columns_list_format = "(7f)[cyan]{l} (25)[blue]{a} (40)[red]{t|f} (30)[magenta]{b}"
    song_list_format = "{$3[%l]$9} {$5%a$9} - {$2%t$9} - {$6%f$9}"
    now_playing_prefix = "$b$1» "
    now_playing_suffix = "$/b"
    playlist_display_mode = "columns" (classic/columns)
    autocenter_mode = "yes"
    centered_cursor = "yes"
    cyclic_scrolling = "yes"
    mouse_list_scroll_whole_page = "no"
    # # Bars
    song_status_format = "{%a - }{%t - }{%b}"
    progressbar_look = "─╼ "
    titles_visibility = "no"
    header_visibility = "no"
    statusbar_visibility = "yes"
    # Browser
    browser_playlist_prefix = "$2plist »$9 "
    browser_display_mode = "classic" (classic/columns)
    # Colors
    discard_colors_if_item_is_selected = "yes"
    header_window_color = "default"
    volume_color = "cyan"
    state_line_color = "white"
    state_flags_color = "green"
    main_window_color = "default"
    color1 = "cyan"
    color2 = "black"
    main_window_highlight_color = "red"
    progressbar_color = "cyan"
    statusbar_color = "white"
    active_column_color = "red"
    visualizer_color = "cyan"
    # Others
    song_window_title_format = "MPD: {%a > }{%t}|{%f}"
    search_engine_display_mode = "columns" (classic/columns)
    follow_now_playing_lyrics = "yes"
    display_screens_numbers_on_start = "no"
    user_interface = "alternative" (classic/alternative)
    And here is my .mpdconf:
    # An example configuration file for MPD
    # See the mpd.conf man page for a more detailed description of each parameter.
    # Files and directories #######################################################
    # This setting controls the top directory which MPD will search to discover the
    # available audio files and add them to the daemon's online database. This
    # setting defaults to the XDG directory, otherwise the music directory will be
    # be disabled and audio files will only be accepted over ipc socket (using
    # file:// protocol) or streaming files over an accepted protocol.
    music_directory "/home/drfreddy/Music/"
    # This setting sets the MPD internal playlist directory. The purpose of this
    # directory is storage for playlists created by MPD. The server will use
    # playlist files not created by the server but only if they are in the MPD
    # format. This setting defaults to playlist saving being disabled.
    playlist_directory "~/.mpd/playlists"
    # This setting sets the location of the MPD database. This file is used to
    # load the database at server start up and store the database while the
    # server is not up. This setting defaults to disabled which will allow
    # MPD to accept files over ipc socket (using file:// protocol) or streaming
    # files over an accepted protocol.
    db_file "~/.mpd/database"
    # These settings are the locations for the daemon log files for the daemon.
    # These logs are great for troubleshooting, depending on your log_level
    # settings.
    # The special value "syslog" makes MPD use the local syslog daemon. This
    # setting defaults to logging to syslog, otherwise logging is disabled.
    #log_file "~/.mpd/log"
    # This setting sets the location of the file which stores the process ID
    # for use of mpd --kill and some init scripts. This setting is disabled by
    # default and the pid file will not be stored.
    #pid_file "~/.mpd/pid"
    # This setting sets the location of the file which contains information about
    # most variables to get MPD back into the same general shape it was in before
    # it was brought down. This setting is disabled by default and the server
    # state will be reset on server start up.
    #state_file "~/.mpd/state"
    # The location of the sticker database. This is a database which
    # manages dynamic information attached to songs.
    #sticker_file "~/.mpd/sticker.sql"
    # General music daemon options ################################################
    # This setting specifies the user that MPD will run as. MPD should never run as
    # root and you may use this setting to make MPD change its user ID after
    # initialization. This setting is disabled by default and MPD is run as the
    # current user.
    user "drfreddy"
    # This setting specifies the group that MPD will run as. If not specified
    # primary group of user specified with "user" setting will be used (if set).
    # This is useful if MPD needs to be a member of group such as "audio" to
    # have permission to use sound card.
    #group "nogroup"
    # This setting sets the address for the daemon to listen on. Careful attention
    # should be paid if this is assigned to anything other then the default, any.
    # This setting can deny access to control of the daemon.
    # For network
    bind_to_address "any"
    # And for Unix Socket
    #bind_to_address "~/.mpd/socket"
    # This setting is the TCP port that is desired for the daemon to get assigned
    # to.
    port "6600"
    # This setting controls the type of information which is logged. Available
    # setting arguments are "default", "secure" or "verbose". The "verbose" setting
    # argument is recommended for troubleshooting, though can quickly stretch
    # available resources on limited hardware storage.
    log_level "default"
    # If you have a problem with your MP3s ending abruptly it is recommended that
    # you set this argument to "no" to attempt to fix the problem. If this solves
    # the problem, it is highly recommended to fix the MP3 files with vbrfix
    # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
    # point gapless MP3 playback can be enabled.
    gapless_mp3_playback "yes"
    # Setting "restore_paused" to "yes" puts MPD into pause mode instead
    # of starting playback after startup.
    #restore_paused "no"
    # This setting enables MPD to create playlists in a format usable by other
    # music players.
    #save_absolute_paths_in_playlists "no"
    # This setting defines a list of tag types that will be extracted during the
    # audio file discovery process. The complete list of possible values can be
    # found in the mpd.conf man page.
    #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
    # This setting enables automatic update of MPD's database when files in
    # music_directory are changed.
    auto_update "yes"
    # Limit the depth of the directories being watched, 0 means only watch
    # the music directory itself. There is no limit by default.
    #auto_update_depth "3"
    # Symbolic link behavior ######################################################
    # If this setting is set to "yes", MPD will discover audio files by following
    # symbolic links outside of the configured music_directory.
    #follow_outside_symlinks "yes"
    # If this setting is set to "yes", MPD will discover audio files by following
    # symbolic links inside of the configured music_directory.
    #follow_inside_symlinks "yes"
    # Zeroconf / Avahi Service Discovery ##########################################
    # If this setting is set to "yes", service information will be published with
    # Zeroconf / Avahi.
    #zeroconf_enabled "yes"
    # The argument to this setting will be the Zeroconf / Avahi unique name for
    # this MPD server on the network.
    #zeroconf_name "Music Player"
    # Permissions #################################################################
    # If this setting is set, MPD will require password authorization. The password
    # can setting can be specified multiple times for different password profiles.
    #password "password@read,add,control,admin"
    # This setting specifies the permissions a user has who has not yet logged in.
    #default_permissions "read,add,control,admin"
    # Input #######################################################################
    input {
    plugin "curl"
    # proxy "proxy.isp.com:8080"
    # proxy_user "user"
    # proxy_password "password"
    # Audio Output ################################################################
    # MPD supports various audio output types, as well as playing through multiple
    # audio outputs at the same time, through multiple audio_output settings
    # blocks. Setting this block is optional, though the server will only attempt
    # autodetection for one sound card.
    # See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
    # other audio outputs.
    # An example of an ALSA output:
    audio_output {
    type "alsa"
    name "Beats by Dr. Freddy"
    device "hw:0,0" # optional
    format "44100:16:2" # optional
    mixer_type "software" # optional
    mixer_device "default" # optional
    mixer_control "PCM" # optional
    mixer_index "0" # optional
    # An example of an OSS output:
    #audio_output {
    # type "oss"
    # name "My OSS Device"
    ## device "/dev/dsp" # optional
    ## format "44100:16:2" # optional
    ## mixer_type "hardware" # optional
    ## mixer_device "/dev/mixer" # optional
    ## mixer_control "PCM" # optional
    # An example of a shout output (for streaming to Icecast):
    #audio_output {
    # type "shout"
    # encoding "ogg" # optional
    # name "My Shout Stream"
    # host "localhost"
    # port "8000"
    # mount "/mpd.ogg"
    # password "hackme"
    # quality "5.0"
    # bitrate "128"
    # format "44100:16:1"
    ## protocol "icecast2" # optional
    ## user "source" # optional
    ## description "My Stream Description" # optional
    ## url "http://example.com" # optional
    ## genre "jazz" # optional
    ## public "no" # optional
    ## timeout "2" # optional
    ## mixer_type "software" # optional
    # An example of a recorder output:
    #audio_output {
    # type "recorder"
    # name "My recorder"
    # encoder "vorbis" # optional, vorbis or lame
    # path "/var/lib/mpd/recorder/mpd.ogg"
    ## quality "5.0" # do not define if bitrate is defined
    # bitrate "128" # do not define if quality is defined
    # format "44100:16:1"
    # An example of a httpd output (built-in HTTP streaming server):
    #audio_output {
    # type "httpd"
    # name "My HTTP Stream"
    # encoder "vorbis" # optional, vorbis or lame
    # port "8000"
    # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
    ## quality "5.0" # do not define if bitrate is defined
    # bitrate "128" # do not define if quality is defined
    # format "44100:16:1"
    # max_clients "0" # optional 0=no limit
    # An example of a pulseaudio output (streaming to a remote pulseaudio server)
    #audio_output {
    # type "pulse"
    # name "My Pulse Output"
    ## server "remote_server" # optional
    ## sink "remote_server_sink" # optional
    ## Example "pipe" output:
    #audio_output {
    # type "pipe"
    # name "my pipe"
    # command "aplay -f cd 2>/dev/null"
    ## Or if you're want to use AudioCompress
    # command "AudioCompress -m | aplay -f cd 2>/dev/null"
    ## Or to send raw PCM stream through PCM:
    # command "nc example.org 8765"
    # format "44100:16:2"
    ## An example of a null output (for no audio output):
    #audio_output {
    # type "null"
    # name "My Null Output"
    # mixer_type "none" # optional
    # This setting will change all decoded audio to be converted to the specified
    # format before being passed to the audio outputs. By default, this setting is
    # disabled.
    #audio_output_format "44100:16:2"
    # If MPD has been compiled with libsamplerate support, this setting specifies
    # the sample rate converter to use. Possible values can be found in the
    # mpd.conf man page or the libsamplerate documentation. By default, this is
    # setting is disabled.
    #samplerate_converter "Fastest Sinc Interpolator"
    # Normalization automatic volume adjustments ##################################
    # This setting specifies the type of ReplayGain to use. This setting can have
    # the argument "off", "album" or "track". See <http://www.replaygain.org>
    # for more details. This setting is off by default.
    #replaygain "album"
    # This setting sets the pre-amp used for files that have ReplayGain tags. By
    # default this setting is disabled.
    #replaygain_preamp "0"
    # This setting enables on-the-fly normalization volume adjustment. This will
    # result in the volume of all playing audio to be adjusted so the output has
    # equal "loudness". This setting is disabled by default.
    #volume_normalization "no"
    # MPD Internal Buffering ######################################################
    # This setting adjusts the size of internal decoded audio buffering. Changing
    # this may have undesired effects. Don't change this if you don't know what you
    # are doing.
    #audio_buffer_size "2048"
    # This setting controls the percentage of the buffer which is filled before
    # beginning to play. Increasing this reduces the chance of audio file skipping,
    # at the cost of increased time prior to audio playback.
    #buffer_before_play "10%"
    # Resource Limitations ########################################################
    # These settings are various limitations to prevent MPD from using too many
    # resources. Generally, these settings should be minimized to prevent security
    # risks, depending on the operating resources.
    #connection_timeout "60"
    #max_connections "10"
    #max_playlist_length "16384"
    #max_command_list_size "2048"
    #max_output_buffer_size "8192"
    # Client TCP keep alive #######################################################
    # For clients connected by TCP on supported platforms.
    # Allows detection of dangling connections due to clients disappearing from
    # the network without closing their connections.
    # This is not usually necessary but can be useful in cases such as wifi connectected
    # clients that go in and out of network range or turn off wifi without closing their
    # connections. Combined with low max_connections this can soon cause clients to not
    # be able to connect.
    # Enable tcp keepalive on new client connections (default is "no")
    #tcp_keep_alive "no"
    # Time in seconds since the last communication on the connection and before
    # the keepalive probing is started. (default is 7200 seconds)
    #tcp_keep_alive_idle "7200"
    # Interval in seconds between keepalive probes, once a probe started.
    # (default is 75 seconds)
    #tcp_keep_alive_interval "75"
    # Number of failed probes before the connection is pronounced dead and
    # the connection is closed. (default is 9 times)
    #tcp_keep_alive_count "9"
    # Character Encoding ##########################################################
    # If file or directory names do not display correctly for your locale then you
    # may need to modify this setting.
    #filesystem_charset "UTF-8"
    # This setting controls the encoding that ID3v1 tags should be converted from.
    #id3v1_encoding "ISO-8859-1"
    # SIDPlay decoder #############################################################
    # songlength_database:
    # Location of your songlengths file, as distributed with the HVSC.
    # The sidplay plugin checks this for matching MD5 fingerprints.
    # See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
    # default_songlength:
    # This is the default playing time in seconds for songs not in the
    # songlength database, or in case you're not using a database.
    # A value of 0 means play indefinitely.
    # filter:
    # Turns the SID filter emulation on or off.
    #decoder {
    # plugin "sidplay"
    # songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
    # default_songlength "120"
    # filter "true"
    audio_output {
    type "fifo"
    name "my_fifo"
    path "/tmp/mpd.fifo"
    Can somebody tell me how to enable the visualization? Am I missing something?
    Last edited by Archer1X (2013-02-07 10:48:34)

    Nevermind..got it working after configured that I have to put this line in .ncmpcpp/config:
    visualizer_look = "+|"
    Anybody have a better look for the visualizer?
    I also have tried several figures like "=="..hmm..kinda like it..
    Last edited by Archer1X (2013-02-07 10:49:13)

  • XML not working in remote host

    Dear colleagues, I've a JSP successfully running locally with J2SE1.4.2 and Tomcat5.
    The problem is it won't run when uploaded in the remote host. I've spent hours in vain, please help.
    The program should load an XML file located in the application folder (same path as the JSP), parse it into
    a DOM tree and retrieve some values.
    I'm getting NullPointerException.
    My import statements:
    <%@ page import="java.io.*" %>
    <%@ page import="org.w3c.dom.*" %>
    <%@ page import="org.xml.sax.*" %>
    <%@ page import="javax.xml.parsers.*" %>
    The code I'm using to get the real path of xml file from JSP scriptlet is:
    String filepath = application.getRealPath(filename);
    However, I also tried and failed with the hard-coded pathname like this:
    String filepath ="/var/tomcat/webapps/babyuniverse/myxmlfile.xml";
    Upon checking the Java version of remote host, I found that it is 1.2.2
    Now I guess, some of the packages I'm importing may not exist in the remote host, especially
    the org.w3c.dom and/or org.xml.sax.
    Upon checking the tomcat/lib folder in the remote host, I found it contains the following jar files:
    ant.jar; commons-fileupload-1.0.jar; jasper.jar; jaxp.jar; parser.jar; servlet.jar; webserver.jar
    Are those packages sufficient to handle my program. If not, which extra packages are needed and where
    they can be found? I've permission to upload files to tomcat/lib and also to restart tomcat if needed.
    But I cannot update classpath.
    Thank you for the help.

    Hi, I found out where to find those jars you mentioned.
    But unfortunately, I was wrong in stating that I'm allowed to upload files to
    tomcat/lib. When I tried, I couldn't. I could only upload them to
    my app's WEB-INF/lib. And this isn't working. Any ideas to solve my problem?
    I'm sure the line I'm getting the NullPointerException is at
    Document mydoc = myparser.parse(new File(xml_file_name));
    My assumption is that it is not able to find a parser.
    Please help someone.

  • XMLSocket "Failed to load policy file" error

    I am trying to use an XMLSocket.swf file, and it is not connecting.  Do I need to open up a port on my server?  I am trying to run this on a dedicated remote Windows 2008 server.
    Here is the error from FlashFirebug:
         OK: Root-level SWF loaded: file:///C|/Users/vcaadmin/AppData/Roaming/Mozilla/Firefox/Profiles/70vbx4ys.default/exten sions/flashfirebug%40o%2Dminds.com/chrome/content/flashfirebug.swf
        OK: Root-level SWF loaded: http://speak-tome.com/flash/XMLSocket.swf
        OK: Searching for <allow-access-from> in policy files to authorize data loading from resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf
        Error: Failed to load policy file from xmlsocket://speak-tome.com:9997
        Error: Request for resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf has failed because the server cannot be reached.
    My crossdomain.xml is saved to the root of the web directory and looks like:
        <?xml version="1.0"?>
        <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
        <cross-domain-policy>
        <site-control permitted-cross-domain-policies="master-only"/>
        <allow-access-from domain="*"/>
        <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
        </cross-domain-policy>
    I notice that both ports 843 and 9997 are closed for my domain (speak-tome.com - 72.167.253.16) when I check using a service such as yougetsignal.com/tools/open-ports.  Do I need to get these ports open to get the policy file to work?

    As a test, I uploaded my Flash/Gaia site into an existing site on my old host.  And although the site actually works in this setting, when I run things in the FlashPlayerDebugger, I'm still getting Security Sandbox Violations - so (as adninjastrator suggested in earlier post), this may have nothing to do with the DNS changes - but perhaps with my setting things up wrong somewhere so that the Flashplayer is trying to access my local computer - maybe??
    Debugger logs gives me this:
    Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
    Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://recreationofthegods.com/bin/main.swf has failed because the server cannot be reached.
    *** Security Sandbox Violation ***
    So, I've now uploaded the identical bin (which contains all the files for my site) - but I'm getting different behaviors on the two hosts.
    On the new holistic servers, the site won't go past the first page:  www.yourgods.com
    On the 1&1 servers, I still get runtime errors in FlashPlayerDebugger - but the site runs ok - http://www.RecreationOfTheGods.com/bin/index.html
    Posting those links in hopes someone with more experience in these sandbox issues can help steer me in the right direction.

  • Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSO

    Hi,
    I'm trying to configure an openSSO setup that involves two GlassFish domains
    domain1 - Acts as my openSSO server
    domain2 - holds the policy agent and the protected web application
    I'm using the following versions:
    GlassFish - Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs)
    OpenSSO - OpenSSO Express Build 8 - http://download.java.net/general/opensso/stable/opensso-build8/opensso_express_20090901.zip
    Policy Agent - J2EE Agent 3.0 - http://download.java.net/general/opensso/nightly/latest/j2eeagents/appserver_v9_agent_3.zip
    I've installed/configured GlassFish domains, openSSO and Policy agent as per the instructions on the following pages:
    http://wikis.sun.com/display/OpenSSO/b5agentinstallinstruction
    Similar steps are mentioned at - http://blogs.sun.com/vijayanand/entry/opensso_and_agent_installation_in
    I'm not getting any errors or problems installing or configuring any of the servers:
    Application Server Config Directory :
    /opt/sun/SUNWappserver/domains/domain2/config
    Application Server Instance name : server
    OpenSSO server URL : http://abhidllx.abhidomain.com:8080/opensso
    Agent URL : http://abhidllx.abhidomain.com:10080/agentapp
    Agent Profile name : myagent1
    Agent Profile Password file name :
    /opt/sun/SUNWappserver/domains/agent-password
    But when I try to access the housekeeping app - agentapp.war i.e.
    I get the following error:
    HTTP Status 500 -
    type Exception report
    message
    descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: PWC1243: Filter execution threw an exception
    root cause
    java.lang.ExceptionInInitializerError
    root cause
    java.lang.RuntimeException: Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSOToken(): Unable to get Application SSO Token
    note The full stack traces of the exception and its root causes are available in the Sun GlassFish Enterprise Server v2.1 logs.-----
    When I retry or press reload I get a different error message:
    HTTP Status 500 -
    type Exception report
    message
    descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: PWC1243: Filter execution threw an exception
    root cause
    java.lang.NoClassDefFoundError: Could not initialize class com.sun.identity.agents.filter.AmFilterManager
    note The full stack traces of the exception and its root causes are available in the Sun GlassFish Enterprise Server v2.1 logs.-----
    Now I don't know if I'm doing anything wrong coz I've tried it out over 10 times and I continue getting the same errors.
    I googled a lot and managed to find this link - http://wikis.sun.com/display/OpenSSO/Troubleshooting+Java+Enterprise+Edition+%28Java+EE%29+Policy+Agents#TroubleshootingJavaEnterpriseEdition%28JavaEE%29PolicyAgents-AgentthrowsClassNotFoundExceptionexceptionwhenaccessingagentappapplication
    I did what it says but I'm still getting the error.
    I'm sharing few log files:
    Anybody who can help?
    thanks in advance.

    contd...
    amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    Naming table -> {iplanet-am-platform-site-id-list=01, iplanet-am-naming-policy-url=%protocol://%host:%port%uri/policyservice, iplanet-am-naming-session-class=com.iplanet.dpro.session.service.SessionRequestHandler, iplanet-am-naming-session-url=%protocol://%host:%port%uri/sessionservice, iplanet-am-naming-securitytokenmanager-url=%protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF, iplanet-am-naming-samlawareservlet-url=%protocol://%host:%port%uri/SAMLAwareServlet, serviceObjectClasses=iplanet-am-naming-service, iplanet-am-naming-auth-url=%protocol://%host:%port%uri/authservice, iplanet-am-naming-profile-class=com.iplanet.dpro.profile.agent.ProfileService, iplanet-am-naming-samlassertionmanager-url=%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF, 01=http://localhost:8080/opensso, iplanet-am-naming-policy-class=com.sun.identity.policy.remote.PolicyRequestHandler, iplanet-am-naming-jaxrpc-url=%protocol://%host:%port%uri/jaxrpc/, iplanet-am-naming-logging-class=com.sun.identity.log.service.LogService, iplanet-am-naming-profile-url=%protocol://%host:%port%uri/profileservice, sun-naming-idsvcs-jaxws-url=%protocol://%host:%port%uri/identityservices/, iplanet-am-naming-samlsoapreceiver-url=%protocol://%host:%port%uri/SAMLSOAPReceiver, sun-naming-idsvcs-rest-url=%protocol://%host:%port%uri/identity/, iplanet-am-platform-lb-cookie-value-list=01|01, iplanet-am-naming-logging-url=%protocol://%host:%port%uri/loggingservice, iplanet-am-naming-fsassertionmanager-url=%protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF, iplanet-am-platform-server-list=http://localhost:8080/opensso, iplanet-am-naming-samlpostservlet-url=%protocol://%host:%port%uri/SAMLPOSTProfileServlet, sun-naming-sts-mex-url=%protocol://%host:%port%uri/sts/mex, sun-naming-sts-url=%protocol://%host:%port%uri/sts, iplanet-am-naming-auth-class=com.sun.identity.authentication.server.AuthXMLHandler}
    amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, 01=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, 01|01=iplanet-am-platform-lb-cookie-value-list, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, http://localhost:8080/opensso=01}
    amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    Site Id Table -> {01=01}
    amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    Platform Servers -> [http://localhost:8080/opensso]
    amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    Platform Server IDs -> [01]
    amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    ERROR: WebtopNaming.getServerId():serverId null for server: http://abhidllx.abhidomain.com:8080/opensso
    amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    ERROR: WebtopNaming.getServerId()
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server ID.
         at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:673)
         at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:594)
         at com.iplanet.services.naming.WebtopNaming$SiteMonitor.<clinit>(WebtopNaming.java:1384)
         at com.iplanet.services.naming.WebtopNaming.startSiteMonitor(WebtopNaming.java:1291)
         at com.iplanet.services.naming.WebtopNaming.initializeNamingService(WebtopNaming.java:247)
         at com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:1067)
         at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
         at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
         at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
    amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    SiteMonitor initialization failed :
    com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server ID.
         at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:681)
         at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:594)
         at com.iplanet.services.naming.WebtopNaming$SiteMonitor.<clinit>(WebtopNaming.java:1384)
         at com.iplanet.services.naming.WebtopNaming.startSiteMonitor(WebtopNaming.java:1291)
         at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
         at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
    amNaming:10/29/2009 12:45:15:557 AM IST: Thread[SystemTimer,10,Grizzly]
    URLChecker.checkSocketConnection() returning true
    amNaming:10/29/2009 12:45:15:572 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
    ERROR: WebtopNaming.getServerId():serverId null for server: http://abhidllx.abhidomain.com:8080/opensso
    amNaming:10/29/2009 12:45:15:572 AM IST: Thread[SystemTimer,10,Grizzly]
    URLChecker.check() : Http connection took 10 ms
    amNaming:10/29/2009 12:45:15:572 AM IST: Thread[SystemTimer,10,Grizzly]
    URLChecker.check() :  setting status to AVAILABLE for http://abhidllx.abhidomain.com:8080/opensso/namingservice
    amNaming:10/29/2009 12:45:15:601 AM IST: Thread[SystemTimer,10,Grizzly]Edited by: don_mahantya on Oct 29, 2009 10:19 PM

  • [SOLVED] issues sshing from some remote hosts

    Had a quick in some of these threads and couldn't find something similar. I am having an issue when it comes to connecting via ssh  from some ip addresses. example from some (very limited) end points, it connects fine including internally to my network and externally so i know my port forwarding is working. Others it doesnt work at all and just times out.
    I have checked to see if my isp is blocking ssh from some ip's so i made available another linux host to try and ssh into and it works fine from the same location that i cant connect to my arch box on.
    I have also done tests to see if this is an issue with the way mac ssh via terminal or windows ssh via putty are interacting but have ruled that out.
    after trying to ssh into the box via ssh -vvvvv hostname it looks like its failing somewhere at the key exchange. ( i am not sure what i need to be looking for here but i am hoping that someone can help me out.
    changed names of hosts etc below.
    [login@remotehost ~]$ ssh -vvvvvv archbox.net
    OpenSSH_6.6.1, OpenSSL 1.0.1h 5 Jun 2014
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to archbox.net [X.X.X.X] port 22.
    debug1: Connection established.
    debug1: identity file /home/remotehost/.ssh/id_rsa type -1
    debug1: identity file /home/remotehost/.ssh/id_rsa-cert type -1
    debug1: identity file /home/remotehost/.ssh/id_dsa type -1
    debug1: identity file /home/remotehost/.ssh/id_dsa-cert type -1
    debug1: identity file /home/remotehost/.ssh/id_ecdsa type -1
    debug1: identity file /home/remotehost/.ssh/id_ecdsa-cert type -1
    debug1: identity file /home/remotehost/.ssh/id_ed25519 type -1
    debug1: identity file /home/remotehost/.ssh/id_ed25519-cert type -1
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_6.6.1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1
    debug1: match: OpenSSH_6.6.1 pat OpenSSH_6.6.1* compat 0x04000000
    debug2: fd 3 setting O_NONBLOCK
    debug3: load_hostkeys: loading entries for host "archbox.net" from file "/home/remotehost/.ssh/known_hosts"
    debug3: load_hostkeys: loaded 0 keys
    debug1: SSH2_MSG_KEXINIT sent
    Last edited by spudicus (2014-07-07 03:34:40)

    OK for those who are interested. Issue was due to MTU being set to 1500. set to 1492 and tested OK.
    Marked as solved

  • Animation failed to load

    I have create a website with Edge animate in april 2014.
    The website has been published and work properly.
    Two things happened since:
    The site need updates and optimisation
    My computer crashed and I've lost all the local files.
    So I went to my Hosting service provider and download all the files of my website back to my local computer.
    Of course there is no "Animation.an" file on the remote server, but I wish I could reopened the Index.html page and do a kind of reverse engineering to rebuild it.
    Edge animate can't even open the index.html page. I am getting and error message:
    "Composition failed to load"
    "Loading failed, please check your page for JavaScript errors."
    Any clue? From what i can read, lot of people are can't open animation project made with the previous version of Edge animate.
    What will be the most effective way to get the site to re-open in Edge animate?
    Here is a link to the site:
    www.unpointsixunhuit.ca
    Thanks
    David

    Hi Pedro,
    Did you find away around this?
    I need to something similar where I want to control when the animation is started. I basically have the HTML for the animation in the index pages DOM but only want to start the animation after some event in the code (usually a duration of 10 seconds).
    Let me know.
    Thanks
    Sham.

  • Error FRM-91500 when compile from remote host

    Dear all,
    I have a problem when compiling forms from remote using 'frmcmp.sh'. It creates error :
    "FRM-91500: Unable to start/complete the build."
    and when I try to compile from remote host using 'frmcmp', it creates error:
    "frmcmp: error while loading shared libraries: libjvm.so: cannot open shared object file: No such file or directory"
    The problem is also occured when I use vnc, ssh, telnet. So I can't complie forms when I login from remote host.
    But,
    the problem doesn't occured if I compile forms by login FROM SERVER directly. There's no firewall between me and the server, network connection is good, and I already try some advice from this forum using:
    export ORACLE_TERM=vt220
    export DISPLAY=202.181.18.31
    But It still doesn't work. I try export DISPLAY using my local Ip-address, using my gateway ip-address, but none of them works. Please help me solve this problem so I can compile from remote host
    The server specification:
    Pentium 4
    RAM 1 GB
    OS Enterprise Linux AS release 4 (October Update 4)
    server IP adddress:x.x.x.x
    with product:
    Oracle DB 10g
    Oracle Apllication Server 10gR2
    My own IP address:192.168.13.34
    server see me as : x.x.x.x
    Regards,
    firman

    your DISPLAY isn't correct,
    it should be something like
    export DISPLAY=203.81.184.30:0.0
    where 0.0 stands for your local display and the virtual screen on it ..
    (or something like that ... )
    in any case I first would check the X-Session using some standard X-application
    like xterm or xclock
    as long as they don't work, your compile will fail
    hope that helps
    Volker

  • FireFox images not loading in local folders (firebug error-Failed to load given URL)

    I am having difficulty when developing websites in local folders (Windows7 computer). The webpages I make are showing images in IE9 & Chrome but not FireFox (nor Safari nor Opera).
    In FireFox I get Firebug "Failed to load given URL" prompt.
    I am using html5 & external linked css stylesheet & the html/html5 & css code validates.
    I have tried using rel path ie images/image.gif & absolute path references ie C:/RPD_Programming/RPD WEB/amwcsnew/index.html
    and have tried using % to eliminate whitespace in references but I cannot get FireFox to display images!!
    This has been a problem for me for around 2 weeks now & is very frustrating. Some website code/templates I have downloaded from the internet display the websites properly (ie load images fine) when I open them locally in FireFox. Why does my code not allow the images to load in FireFox (paths/permissions/other issue??). How can I fix this?
    Here is example css & html5 not displaying images from local directory in FireFox (fine in IE9 & Chrome):
    style.css
    /* CSS Document */
    /*Basic Reset*/
    margin:0;
    padding:0;
    html{
    /* HTML5 display-role reset for older browsers */
    article, aside, details, figcaption, figure,
    footer, header, hgroup, menu, nav, section {
    display: block;
    body{
    width:1200px;
    margin:0 auto;
    header{
    height:450px;
    background:url("C:/RPD_Programming/RPD WEB/amwcsnew/images/header.gif");
    background-repeat:no-repeat;
    #mid{height:750px;
    background:url('C:/RPD_Programming/RPD_WEB/amwcsnew/images/mid.gif')no-repeat;
    footer{height:286px;
    background:url('C:/RPD_Programming/RPD WEB/amwcsnew/images/footer.gif')no-repeat;
    index.html
    <!doctype html><!-- simplified doctype works for all previous versions of HTML as well -->
    <!--html5 template from www.impressivewebs.com_modified by RPD-->
    <!-- Paul Irish's technique for targeting IE, modified to only target IE6, applied to the html element instead of body -->
    <!--[if lt IE 7 ]><html lang="en" class="no-js ie6"><![endif]-->
    <!--[if (gt IE 6)|!(IE)]><!--><html lang="en" class="no-js"><!--<![endif]-->
    <head>
    <!-- simplified character encoding -->
    <meta charset="utf-8">
    <title>amwcs-new</title>
    <meta name="description" content="amwcs">
    <meta name="author" content="rpd">
    <!-- Delete these two icon references once you've placed them in the root directory with these file names -->
    <!-- favicon 16x16 -->
    <link rel="shortcut icon" href="/favicon.ico">
    <!-- apple touch icon 57x57 -->
    <link rel="apple-touch-icon" href="/apple-touch-icon.png">
    <!-- Main style sheet. Change version number in query string to force styles refresh -->
    <!-- Link element no longer needs type attribute -->
    <!-- <link rel="stylesheet" type="text/css" media="all" href="css/style.css" />-->
    <link rel="stylesheet" href="css/style.css?v=2">
    <!-- Modernizr for feature detection of CSS3 and HTML5; must be placed in the "head" -->
    <!-- Script tag no longer needs type attribute -->
    <script src="js/modernizr-1.6.min.js"></script>
    <!-- Remove the script reference below if you're using Modernizr -->
    <!--[if lt IE 9]>
    <script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script>
    <![endif]-->
    </head>
    <!-- If possible, use the body as the container -->
    <!-- The "home" class is an example of a dynamic class created on the server for page-specific targeting
    <body class="home">-->
    <body>
    <!-- ******************************************************************** -->
    <!-- The content below is for demonstration of some common HTML5 elements -->
    <!-- More than likely you'll rip out everything except header/section/footer and start fresh -->
    <!-- First header has an ID so you can give it individual styles, and target stuff inside it
    <header id="hd1"> No way Hosay-not by default! Default is <header> tag (RPD edit) -->
    <header>
    <!-- "hgroup" is used to make two headings into one, to prevent a new document node from forming -->
    <hgroup>
    <h1>amwcs</h1>
    <h2>tagline</h2>
    </hgroup>
    <!-- Main nav, styled by targeting "#hd1 nav"; you can have more than one nav element per page -->
    <nav>
    <ul>
    <li><a href="#">Home</a></li>
    <li><a href="#">About</a></li>
    <li><a href="#">Services</a></li>
    <li><a href="#">Contact</a></li>
    </ul>
    </nav>
    </header><!--End header & or #hd1 header div id if used-->
    <!-- This is the main "div" that wraps the content generically; don't use "section" for this -->
    <div id="mid">
    <!-- The first of two "section" elements for demo purposes; optional class added for styling (hs1 = "home section 1") -->
    <section class="hs1">
    <!-- Each section should begin with a new h1 (not h2), and optionally a header -->
    <!-- You can have more than one header/footer pair on a page
    <header>
    <h1>This is a Page Sub Title</h1>
    </header> -->
    <p>Some content...</p>
    <!-- The h2 below is a sub heading relative to the h1 in this section, not for the whole document -->
    <h2>Demonstrating EM and STRONG</h2>
    <!-- "strong" is used for SEO and contextual hierarchy -->
    <p><strong>This text will have more importance (SEO-wise and contextually)</strong></p>
    <!-- "b" is used for stylistic offset of text that's NOT important contextually -->
    <p><b>This text has visual importance but has no contextual or SEO importance</b></p>
    <!-- "em" is used for colloquial-style emphasis -->
    <p>This is a <em>very</em> colloquial expression.</p>
    <!-- There can be multiple footers on each page -->
    <!-- Secondary headers and footers don't necesarily need ids; they can be targeted via context (i.e. ".hs1 footer")
    <footer>
    <!-- incite a riot: http://24ways.org/2009/incite-a-riot
    <p>Author: <cite>Louis Lazaris</cite></p>
    </footer> -->
    </section><!-- .hs1 -->
    <!-- This is another section; doesn't have header/footer because it's not required -->
    <section class="hs2">
    <h1>This is another section</h1>
    <p>This is some dummy content</p>
    </section><!-- .hs2 -->
    </div><!-- #mid -->
    <!-- The "aside" element could be a sidebar (outside an article or section) -->
    <!-- Or it could reference other tangentially-related content within an article or section
    <aside id="sidebar">
    <p>Sidebar content</p>
    </aside>-->
    <!-- The main footer has an ID for targeting, similar to the main header -->
    <footer >
    <p>copyright &copy; year</p>
    </footer>
    <!-- Remote jQuery with local fallback; taken from HTML5 Boilerplate http://html5boilerplate.com -->
    <!-- jQuery version might not be the latest; check jquery.com -->
    <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js"></script>
    <script>!window.jQuery && document.write(unescape('%3Cscript src="js/jquery-1.4.4.min.js"%3E%3C/script%3E'))</script>
    <!-- Below is your script file, which has a basic JavaScript design pattern that you can optionally use -->
    <!-- Keep this and plugin scripts at the bottom for faster page load; combining and minifying scripts is recommended -->
    <script src="js/general.js"></script>
    <!-- asynchronous analytics code by Mathias Bynens; change UA-XXXXX-X to your own code; http://mathiasbynens.be/notes/async-analytics-snippet -->
    <!-- this can also be placed in the <head> if you want page views to be tracked quicker -->
    <script>
    var _gaq = [['_setAccount', 'UA-XXXXX-X'], ['_trackPageview']];
    (function(d, t) {
    var g = d.createElement(t),
    s = d.getElementsByTagName(t)[0];
    g.async = true;
    g.src = ('https:' == location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
    s.parentNode.insertBefore(g, s);
    })(document, 'script');
    </script>
    </body>
    </html>
    I am most grateful for help & look forward to replies & fixing this-thanks
    NB
    Is there a FireFox guide/manual in pdf format available anywhere? I have not found one yet & a FireFox reference might be useful!

    You need to use file:// as the protocol instead of C:/. The latter may never work (C:\ might).
    Where is the main HTML located ?
    Easiest if to store the images in a sub folder of the location because you can't go back via ../ beyond that root location for security reasons.
    See:
    *http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  • Extension Manager fails to load  (Error reported on DigitalPublishingRelease.mxi_air)

    Hi
    Adobe CreativeSuite Standard 5.5 has been installed but Extension manager is failing to load or fails whilst loading. Would someone be able to assist?
    Below is the end of the log.txt file after the ExManLog.YES file was created.
    The log file isn't always created on some machines where the .YES file is setup. 
    The software is installed on Windows Vista. Some machines have a Core I3 chip.
    I have been reading the forum and tried changing the permissions where I can and tried the flash issue. Firefox is not installed.
    3/14/2012 12:26:53.516 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup Client UI.mxi_air
    3/14/2012 12:26:53.516 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup Client.mxi_air
    3/14/2012 12:26:53.533 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup Client.mxi_air
    3/14/2012 12:26:53.534 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup UI.mxi_air
    3/14/2012 12:26:53.551 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup UI.mxi_air
    3/14/2012 12:26:53.551 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup.mxi_air
    3/14/2012 12:26:53.568 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup.mxi_air
    3/14/2012 12:26:53.568 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_WorldReady.mxi_air
    3/14/2012 12:26:53.585 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_WorldReady.mxi_air
    3/14/2012 12:26:53.585 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMedia UI.mxi_air
    3/14/2012 12:26:53.602 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMedia UI.mxi_air
    3/14/2012 12:26:53.602 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XML.mxi_air
    3/14/2012 12:26:53.618 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XML.mxi_air
    3/14/2012 12:26:53.619 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMLParser.mxi_air
    3/14/2012 12:26:53.636 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMLParser.mxi_air
    3/14/2012 12:26:53.677 [INFO] com.adobe.exman.controller.LoadInstalledExtensionsCommand.LoadMXIFileCompleteCallBack onComplete(), xmlFilename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi_air
    3/14/2012 12:26:53.677 [INFO] com.adobe.exman.model.ProductExtensionManagerProxy loadMXIDataIntoGridData(): xmlFilename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi_air
    3/14/2012 12:26:53.678 [INFO] com.adobe.exman.vo.ExtensionStaticData no 'icon' attribute in MXI
    3/14/2012 12:26:53.679 [INFO] com.adobe.exman.vo.ExtensionStaticData there is no method specified or methos is not direct link or no URL specified for extension: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi
    3/14/2012 12:26:53.679 [INFO] com.adobe.exman.vo.ExtensionStaticData isCompatibleWithProduct(), product==InDesign productVersion==7.5.0
    CompatibleProduct: _productInternalName==InDesign _version==7.5 _maxversion ==2147483647 _primary==true _required==false
    3/14/2012 12:26:53.680 [ERROR] com.adobe.exman.vo.ProductInfo removeExtensionByMXIAIRFileName(), no this xmiAIRFilename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\
    3/14/2012 12:26:53.516 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup Client UI.mxi_air
    3/14/2012 12:26:53.516 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup Client.mxi_air
    3/14/2012 12:26:53.533 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup Client.mxi_air
    3/14/2012 12:26:53.534 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup UI.mxi_air
    3/14/2012 12:26:53.551 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup UI.mxi_air
    3/14/2012 12:26:53.551 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup.mxi_air
    3/14/2012 12:26:53.568 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_Workgroup.mxi_air
    3/14/2012 12:26:53.568 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_WorldReady.mxi_air
    3/14/2012 12:26:53.585 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_WorldReady.mxi_air
    3/14/2012 12:26:53.585 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMedia UI.mxi_air
    3/14/2012 12:26:53.602 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMedia UI.mxi_air
    3/14/2012 12:26:53.602 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XML.mxi_air
    3/14/2012 12:26:53.618 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XML.mxi_air
    3/14/2012 12:26:53.619 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), will load xmiFileName: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMLParser.mxi_air
    3/14/2012 12:26:53.636 [INFO] com.adobe.exman.business.XMLLoader XMLLoader(), try to load: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\idcs5_5_XMLParser.mxi_air
    3/14/2012 12:26:53.677 [INFO] com.adobe.exman.controller.LoadInstalledExtensionsCommand.LoadMXIFileCompleteCallBack onComplete(), xmlFilename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi_air
    3/14/2012 12:26:53.677 [INFO] com.adobe.exman.model.ProductExtensionManagerProxy loadMXIDataIntoGridData(): xmlFilename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi_air
    3/14/2012 12:26:53.678 [INFO] com.adobe.exman.vo.ExtensionStaticData no 'icon' attribute in MXI
    3/14/2012 12:26:53.679 [INFO] com.adobe.exman.vo.ExtensionStaticData there is no method specified or methos is not direct link or no URL specified for extension: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi
    3/14/2012 12:26:53.679 [INFO] com.adobe.exman.vo.ExtensionStaticData isCompatibleWithProduct(), product==InDesign productVersion==7.5.0
    CompatibleProduct: _productInternalName==InDesign _version==7.5 _maxversion ==2147483647 _primary==true _required==false
    3/14/2012 12:26:53.680 [ERROR] com.adobe.exman.vo.ProductInfo removeExtensionByMXIAIRFileName(), no this xmiAIRFilename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi_air
    3/14/2012 12:26:53.680 [INFO] com.adobe.exman.vo.ProductInfo addExtension(), added extension to productInfo: ------extension == dynamicData: true------staticData: mxi_air filename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi_air mxi filename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi extname: DigitalPublishing author: Adobe Systems Incorporated version: 7.5.2.9 type: ------productInfo == productName=[InDesign CS5.5], internalName=[InDesign], productversion=[7.5.0], productEMStore=[C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\], productExtPath=[C:\Us
    3/14/2012 12:26:53.680 [INFO] com.adobe.exman.vo.ProductInfo addExtension(), added extension to productInfo: ------extension == dynamicData: true------staticData: mxi_air filename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi_air mxi filename: C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\DigitalPublishingRelease.mxi extname: DigitalPublishing author: Adobe Systems Incorporated version: 7.5.2.9 type: ------productInfo == productName=[InDesign CS5.5], internalName=[InDesign], productversion=[7.5.0], productEMStore=[C:\ProgramData\Adobe\InDesign\Version 7.5\EmStorePath\], productExtPath=[C:\Us

    What's the meaning of "remoting onto the machine"? Is it by "Remote Desktop Control"( mstsc )? There is no difference in running Extension Manager locally or by RDC. However, you have to make sure that you login with the same account. If you still can not launch Extension Manager on your laptop, you can generate log files and paste them here.
    BTW, we created "Frequently Asked Questions" sub forum for Extension Manager. You might find some useful information in it. Check out http://forums.adobe.com/community/creativesuites/extensionmanager/faq

Maybe you are looking for

  • How to transfer Sales BOM from ECC to APO DP

    Hi, Demand planning require Sales BOM from ECC. Sales BOM in ECC will not have Routing & Work center, then how a PPM with Sales BOM can be transferred.  If i have to create a dummy routing & WC for those sales BOM it will be tidious job to create all

  • Type casting in ABAP

    Let's say I have the following code: DATA idx TYPE i. DATA msg TYPE string. msg = "You are on index #". CONCATENATE msg idx INTO msg. WRITE msg. This obviously won't work because idx isn't the right data type so my question is, how do I cast idx into

  • Mapping for Order Split

    Hello, We have a requirement that we would receive IDocs from a third party and we would send them back. But the condition is,if these ORDERS IDocs contain materials belonging to different distribution channel then IDoc has to be split in two (10 or

  • I fail to buy apps in itunes store b'cause i don't have master card or visa accounts''

    I fail to buy apps in itunes store b'cause i don't have master card or visa accounts'

  • Mail is not working

    After I SL mail stopped working. At first I thought it was only mail with attachments but i tried a simple text only email and it will not send, it just stays in outbox... Anyone else having the same issue?