Plugin Fails to install to remote host OEM 12c R2

I am trying to get a couple of plugins to deploy to some remote hosts, but they are failing. I did the initial agent install to the servers with no problems. Now I am trying to add the Oracle Database plugin, and the E-Business Suite Plugin now. I have successfully done this before on another OEM install. Here is the output log I see:
Calling the validateRuntimeParameters method
PluginDeployonAgt: Plugin Deploy on Agent : validated parameters
The target_guid is CB189EA727EA205C077F7FC2F853287B.propName : OracleHome
propName : AgentState
PluginDeployonAgt
Plugin Deploy on Agent - oraHome /u01/app/Agent12c/core/12.1.0.2.0
PluginDeployonAgt - emStateDir /u01/app/Agent12c/agent_inst
The plugin details are :
Agent url oracle.apps.ebs
pluginId 12.1.0.1.0
pluginVersion 0
pluginRevision DISCOVERY
pluginType {4}
action {5}
operCode {6}
errorCode {7}
errorMsg {8}
The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
The plugin details are :
Agent url oracle.apps.ebs
pluginId 12.1.0.1.0
pluginVersion 0
pluginRevision AGENT
pluginType {4}
action {5}
operCode {6}
errorCode {7}
errorMsg {8}
The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
The exit code is -1
I have tried resynchronizing, stop/start agents, stop/start OEM, and went as far as rebooting the OEM server. I have not tried removing the host, and agent, then trying to reinstall it.
Any thoughts, suggestions? Thanks in advance.

Hi,
I have the same problem when i try to deploy patch 16466443 on remote agent via Plan.
Step: GetHomePatchMap Error
PatchList : 16466443
TargetName : ------:3872
[Apr 28, 2013 6:04:22 PM] Command Arguments:
/oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
[Apr 28, 2013 6:04:22 PM] java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission performOperation)
[Apr 28, 2013 6:04:22 PM] Unexpected Exception: null
on the server, this command works correctly:
oracle@xxx $ /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
Oracle Interim Patch Installer version 11.1.0.9.10
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/agent12cr2/core/12.1.0.2.0
Central Inventory : /oracle/oraInventory
from : /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
OPatch version : 11.1.0.9.10
OUI version : 11.1.0.9.0
Log file location : /oracle/agent12cr2/core/12.1.0.2.0/cfgtoollogs/opatch/opatch2013-04-28_19-02-03PM_1.log
Invoking utility "checkcomponents"
The input patch(es) "[16466443]" can be applied to the following homes (1):
/oracle/agent12cr2/core/12.1.0.2.0
The input patch(es) "[16466443]" can be applied to the passed homes by the following command(s):
/oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch napply /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invptrLoc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
OPatch command 'checkComponents' done.
OPatch succeeded.
The error occurs when I try to put any patch on the agent through the Plan
somebody decided this issue?
Edited by: 999966 on 28.04.2013 7:02

Similar Messages

  • TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

     TACACS+ configured on router and router is in ACS.  I can ping the ACS but the router cannot establish a connection to authenticate users.
    aaa group server tacacs+ hq_acs-1
    server 10.20.17.2
    ip tacacs source-interface GigabitEthernet0/0
    aaa authentication login default group tacacs+ local
    aaa authorization config-commands
    aaa authorization exec default group tacacs+ local
    aaa authorization commands 10 default group tacacs+ local
    aaa authorization commands 15 default group tacacs+ local
    aaa accounting nested
    aaa accounting update newinfo periodic 60
    aaa accounting auth-proxy default start-stop group tacacs+
    aaa accounting exec default start-stop group tacacs+
    aaa accounting commands 15 default start-stop group tacacs+
    aaa accounting network default start-stop group tacacs+
    aaa accounting connection default start-stop group tacacs+
    aaa accounting system default start-stop group tacacs+
    aaa accounting resource default start-stop group tacacs+
    BigTree_3945#sh ip int br
    Interface                  IP-Address      OK? Method Status                Protocol
    GigabitEthernet0/0         10.4.3.1        YES NVRAM  down                  down
    GigabitEthernet0/1         10.12.10.26     YES NVRAM  up                    up 
    Serial0/2/0                unassigned      YES NVRAM  down                  down
    Serial0/2/0.602            10.12.15.10     YES NVRAM  down                  down
    Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
    Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
    Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
    Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
    Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
    Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
    Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
    Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
    Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
    Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
    Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
    Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
    Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
    Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
    Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
    Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
    Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
    Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
    Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
    Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
    Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
    Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
    BigTree_3945#
    AAA Client IP Address
    10.4.3.* 10.12.15.10
    Key
    Network Device Group
    Test    
    NJT    
    AccessLink    
    (Not Assigned)    
    Authenticate Using
    TACACS+ (Cisco IOS)    
    RADIUS (Cisco Aironet)    
    RADIUS (Cisco BBSM)    
    RADIUS (Cisco IOS/PIX)    
    RADIUS (Cisco VPN 3000)    
    RADIUS (Cisco VPN 5000)    
    RADIUS (IETF)    
    RADIUS (Ascend)    
    RADIUS (Juniper)    
    RADIUS (Nortel)    
    RADIUS (iPass)    
    Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
    The 10.12.10.* range is listed under the HQ site.
    Your help is greatly appreciated.

    You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
    What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
    Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
    Are you using VRFs?
    What version of IOS?

  • BPEL Designer Download Exlipse Plugin Fails to Install

    BPEL Designer Download, Eclipse Plugin Fails to Install
    When installing the .exe, the download does not identify the proper version of Eclipse. It fails stating that the version required is at least 3.0, which is the only version install on my computer
    Anyone have any ideas?
    Thanks.
    -dave
    404-661-6767

    You should probably post this in the BPEL forum to get an appropriate response: BPEL
    OTN

  • BPEL Designer Download, Eclipse Plugin Fails to Install

    BPEL Designer Download, Eclipse Plugin Fails to Install
    When installing the .exe, the download does not identify the proper version of Eclipse. It fails stating that the version required is at least 3.0, which is the only version install on my computer
    Anyone have any ideas?
    Thanks.
    -dave
    404-661-6767

    David,
    This might be caused by the fact the fact that you have the platform version of eclipse. BPEL PM requires the SDK version (full download ~87MB).
    Edwin

  • Vi fails to load on remote host

    I am trying to run a vi on a remote RT pxi chassis from teststand. I have two vi's the first is very simple and runs on the RT remote host fine. The second is calling niFgen sub vi's which will not run. I get the error "failed to load vi on remote host. The vi is not executable" and I get an error -17600. However if I run this vi from labview targeting the RT system it runs fine. Also if I run the vi from Labview and then without unloading it I run my sequence this also works. Any ideas anyone?
    Nick

    Nick,
    Any dynamic dependencies of the VI need to be on the target if you want to run it using TestStand. LabVIEW takes care of downloading the required DLLs for you, but TestStand won't.
    - The first step is to make sure NI-FGEN is installed on the target.
    - Try to narrow the behavior to a single VI and then open it up to see if it's making a call to a DLL, if it needs a DLL then place it on your NI-RT\System\ folder on the target and try again. If this is the case, please reply with the name of the DLL so we can take a more detailed look at the issue.
    Let me know,
    Alejandro

  • Sap J2ee is instaled on remot host

    Hi,
         I'm work in a proyect with a page web in html,in Sap netweaver developer studio(eclipse) and i like insert date in a database that it is on remot host. How I can to make?
    Thanks.
    excuse me for my english

    ok, it depends
    of what?
    of where is the database?,  in case of the database is in the same web server then you can use the timestamp of the server in your sql Statement, or in the case if your Database server resides in another server then y suggest you the posibility to create an Java RMI class that lives on the database server and then call it.
    (or a servlet if you wisht to use a web container).
    Greetings

  • Exchange 2010 SP3 Failing to Install "The remote procedure call failed"

    I am getting an error while trying to upgrade the first Mailbox server in the organization to SP3. The CAS and HUB servers already upgraded without any issues. Any help is greatly appreciated.
    Here is the exchange setup logs output:
    [11/15/2014 09:10:52.0512] [2] Creating Server Object with DN = /dc=xxx/dc=xxx/cn=Configuration/cn=Services/cn=Microsoft Exchange/cn=xxx/cn=Administrative Groups/cn=Exchange Administrative Group (xxxx)/cn=Servers/cn=xxxxxx
    [11/15/2014 09:10:52.0512] [2]  Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
               Error code 0X8000500D (20493): This property can't be found in the cache.
    [11/15/2014 09:10:52.0528] [2] Leaving ScCreateServerObject
    [11/15/2014 09:10:52.0528] [2] Entering ScSetServerNetworkAddresses
    [11/15/2014 09:10:52.0528] [2] Entering ScGetServerDNSNameFromDS
    [11/15/2014 09:11:11.0482] [2]  ScUserDNFromLoginName (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\exmisc.cxx:1441)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  ScGetServerDNSNameFromDS (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\dsmisc.cxx:3481)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScGetServerDNSNameFromDS
    [11/15/2014 09:11:11.0482] [2]  ScSetServerNetworkAddresses (f:\14.03.0123\sources\dev\admin\src\udog\excommon\ptudutil.cxx:1028)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScSetServerNetworkAddresses
    [11/15/2014 09:11:11.0482] [2]  CAtomServer::ScAddOrRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:288)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  CAtomServer::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:354)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  CBaseAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:815)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving CBaseAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
    [11/15/2014 09:11:11.0482] [2] Service = '' CBaseServiceAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:242)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving CBaseServiceAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
    [11/15/2014 09:11:11.0482] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2]  ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
               Error code 0XC00706BE (1726): The remote procedure call failed.
    [11/15/2014 09:11:11.0482] [2] Leaving ScSetupAtom
    [11/15/2014 09:11:11.0482] [2] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] The following 1 error(s) occurred during task execution:
    [11/15/2014 09:11:11.0482] [1] 0.  ErrorRecord: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] [ERROR] The following error was generated when "$error.Clear();
        buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
    " was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.".
    [11/15/2014 09:11:11.0482] [1] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    [11/15/2014 09:11:11.0482] [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [11/15/2014 09:11:11.0482] [1] Setup is stopping now because of one or more critical errors.
    [11/15/2014 09:11:11.0482] [1] Finished executing component tasks.
    [11/15/2014 09:11:11.0529] [1] Ending processing Install-MailboxRole
    [11/15/2014 09:14:12.0977] [0] End of Setup
    [11/15/2014 09:14:12.0977] [0] **********************************************
    Additionally here is the 2 errors that are showing up in the event viewer for MSExachange Management:
    Exchange Management Console-Local
    2652
    45
    00:00:18.9698426
    View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
    Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
    0
    Exchange Management Console-Local
    2652
    9
    00:00:37.7834262
    View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
    Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear(); buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
    " was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.". ---> Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The
    remote procedure call failed.'. --- End of inner exception stack trace ---
    0
    Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.

    Hi,
    Please try to remove the Water mark and Action keys under
    HKLM\SOFTWARE\Microsoft\Exchangeserver\V14\MailboxRole
    After that, reboot the server and rerun the set up.
    This issue due to Exchange failed set up was trying to resume the previously failed setup rather than starting completely over.
    Best Regards.

  • SMP fails to install on remote DP

    Hi
    I have the following problem:
    The State Migration Point install is failing on a remote DP. This DP sits in a different domain from the primary site server and is also a domain controller for that domain. Its Win2008R2 & has IIS installed already. The DP role is working fine but i
    cant get the SMP to install. Here is what i could find in the smpMSI.log:
    MSI (s) (7C:68) [11:01:43:073]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI34F4.tmp, Entrypoint: CcmCreateIISVirtualDirectories
    [11:04:43] ERROR: Timed out trying to acquire lock.
    [11:04:43] ERROR: Failed to acquire the port lock '0x80004005'.
    [11:04:43] ERROR: Failed to configure sms ports '0x80004005'.
    [11:04:43] ERROR: Failed to process port information.
    [11:04:43] @@ERR:25011
    MSI (s) (7C!D4) [11:04:43:160]: Product: ConfigMgr State Migration point -- Internal Error 25011. 80004005
    Internal Error 25011. 80004005
    CustomAction CcmCreateIISVirtualDirectories returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (7C:3C) [11:04:43:171]: User policy value 'DisableRollback' is 0
    MSI (s) (7C:3C) [11:04:43:171]: Machine policy value 'DisableRollback' is 0
    Action ended 11:04:43: InstallFinalize. Return value 3.
    and from the SMSSMPSetup.log:
    <01-30-2013 11:07:08> ====================================================================
    <01-30-2013 11:07:08> SMSSMP Setup Started....
    <01-30-2013 11:07:08> Parameters: \\Server\D$\SMS\bin\x64\rolesetup.exe /install /siteserver:SCCM01 SMSSMP 0
    <01-30-2013 11:07:08> Installing Pre Reqs for SMSSMP
    <01-30-2013 11:07:08>         ======== Installing Pre Reqs for Role SMSSMP ========
    <01-30-2013 11:07:08> Found 2 Pre Reqs for Role SMSSMP
    <01-30-2013 11:07:08> Pre Req MSXML60 found.
    <01-30-2013 11:07:08> No versions of MSXML60 are installed.  Would install new MSXML60.
    <01-30-2013 11:07:08> Enabling MSI logging.  msxml6_x64.msi will log to D:\SMS\logs\msxml6_x64MSI.log
    <01-30-2013 11:07:08> Installing D:\SMS\bin\x64\00000409\msxml6_x64.msi
    <01-30-2013 11:07:09> msxml6_x64.msi exited with return code: 0
    <01-30-2013 11:07:09> msxml6_x64.msi Installation was successful.
    <01-30-2013 11:07:09> Pre Req SqlNativeClient found.
    <01-30-2013 11:07:09> SqlNativeClient already installed (Product Code: {C79A7EAB-9D6F-4072-8A6D-F8F54957CD93}). Would not install again.
    <01-30-2013 11:07:09> Pre Req SqlNativeClient is already installed. Skipping it.
    <01-30-2013 11:07:09>         ======== Completed Installation of Pre Reqs for Role SMSSMP ========
    <01-30-2013 11:07:09> Installing the SMSSMP
    <01-30-2013 11:07:09> Passed OS version check.
    <01-30-2013 11:07:09> IIS Service is installed.
    <01-30-2013 11:07:09> No versions of SMSSMP are installed.  Installing new SMSSMP.
    <01-30-2013 11:07:09> Enabling MSI logging.  smp.msi will log to D:\SMS\logs\smpMSI.log
    <01-30-2013 11:07:09> Installing D:\SMS\bin\x64\smp.msi USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=224 CCMINSTALLDIR="D:\SMS_CCM" SMPENABLELOGGING=TRUE SMPLOGLEVEL=1 SMPLOGMAXSIZE=1000000
    SMPLOGMAXHISTORY=1
    <01-30-2013 11:13:11> smp.msi exited with return code: 1603
    <01-30-2013 11:13:11> Backing up D:\SMS\logs\smpMSI.log to D:\SMS\logs\smpMSI.log.LastError
    <01-30-2013 11:13:11> Fatal MSI Error - smp.msi could not be installed.
    <01-30-2013 11:13:11> ~RoleSetup().
    I think it has something to do with IIS but any help/suggestions would be great!

    Hi Torsten
    this is what is found in smpMSI.log above 'return value 3'
    [15:43:39] ERROR: Timed out trying to acquire lock.
    [15:43:39] ERROR: Failed to acquire the port lock '0x80004005'.
    [15:43:39] ERROR: Failed to configure sms ports '0x80004005'.
    [15:43:39] ERROR: Failed to process port information.
    [15:43:39] @@ERR:25011
    MSI (s) (44!48) [15:43:39:673]: Product: ConfigMgr State Migration point -- Internal Error 25011. 80004005
    Internal Error 25011. 80004005
    CustomAction CcmCreateIISVirtualDirectories returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (44:54) [15:43:39:679]: User policy value 'DisableRollback' is 0
    MSI (s) (44:54) [15:43:39:679]: Machine policy value 'DisableRollback' is 0
    Action ended 15:43:39: InstallFinalize. Return value 3.
    what could failed to aquire port lock be refering to? a network issue ? or maybe a locked file by another process?
    thanks

  • Linux sgd plugin fails to install

    Having consistent problems getting the linux plugin to install from the sgd server. The .tarantella directory is created, but the ttatcc binary is not installed. I can install the ttawebtop, but this does not provide the desired functionality with the Firefox and Mozilla browsers. My linux users are on FC 5, SuSE 10 and SuSE 10.1. Jave 1.5 is installed on all Linux clients. There are no issues with the windoze plugins.
    -damon

    I've found this same behavior. I've managed to track the helper install problem down to a difference in the syntax of "tail" between FC4 and FC5.
    The helper downloads itself as a shell script and then tries to execute itself. The script tries to use "tail +13" to skip the beginning text, but tail no longer supports this syntax on FC5. The correct syntax is now "tail -n +13". I'm not sure if this change was intentional or not.
    I've managed to tweak around and force the helper app to install, but even then it doesn't work properly. The window that comes up to enter username/password won't accept any keyboard input, so we appear to have two problems at work here.

  • Elom Java Console "Connect to remote host Fail"

    Hi,
    I'm accessing an elom over the https interface, which works fine, however when trying to launch the Java console, the app starts but a dialogue box appears stating "Connect to remote host Fail!", and quits when I click ok. I'm using:
    Kubuntu 9.10
    Firefox 3.5.5
    Java 1.6.0_15
    Elom firmware version 2.70
    I've also tried running against JRE 1.5, and tried saving the jnlp file and running that directly from javaws, all attempts produce the same result. I am able to connect to port 8890 from my machine. An strace seems to suggest that it sends and receives from port 8890 but then gets a Connection reset by peer.
    Furthermore I've also tried running it through localhost using an ssh tunnel to the elom, again, same result.
    I've now run out of ideas of what could be causing this issue, any help would be greatly appreciated.
    TIA
    Regards
    Craig

    SOLVED
    FYI, I downloaded the debian package of libstdc++5 from http://ftp.us.debian.org/debian/pool/main/g/gcc-3.3/libstdc++5_3.3.6-18_i386.deb
    After installing that on Kubuntu, the console works fine.

  • Install OEM 12c fails on "start oracle management service". win2008

    Windows Server 2008 R2 Enterprise SP1 x64
    Oracle Database 11g release 11.2.0.3.0
    I install OEM 12c(12.1.0.3) following this manual: Installing Enterprise Manager System
    before start i've installed WebLogic Server 10.3.6 and aplied 2 patches specified in this manual
    installation type is advanced, small, so i have created database from the appropriate template
    i also installed cygwin and started ssh-service
    the installation of OEM process fails on 73% "start oracle management service" with this message:
    INFO: oracle.sysman.top.oms:Starting OMS ...
    INFO: oracle.sysman.top.oms:Executing command: cmd /c set NEED_EXIT_CODE=1&&C:\Oracle\Middleware\oms\bin\emctl.bat start oms
    INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 3 
    INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.oms:Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
    INFO: oracle.sysman.top.oms:Oracle Management Server is Down
    INFO: oracle.sysman.top.oms:Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
    SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
    in C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log i got this:
    2013-09-06 12:24:27,012 [main] ERROR commands.BaseCommand logAndPrint.620 - Oracle Management Server Could Not Be Started
    Check EM Server log file for details: C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out
    2013-09-06 12:24:27,012 [main] INFO  commands.StartCommand startOMS.337 - startOMS finished with result: 1
    2013-09-06 12:24:30,974 [main] INFO  commands.StartCommand startOMS.371 - net start return code is 2
    2013-09-06 12:24:30,974 [main] ERROR commands.BaseCommand logAndPrint.620 - Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
    2013-09-06 12:24:34,094 [main] INFO  commands.BaseCommand printMessage.404 - statusOMS finished with result: 8
    2013-09-06 12:24:34,094 [main] ERROR commands.BaseCommand logAndPrint.620 - Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
    and in C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out this:
    <06.09.2013 12:24:01 ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.25-b01 from Oracle Corporation>
    <06.09.2013 12:24:01 ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13349651 Thu May 24 10:18:28 IST 2012
    WebLogic Server Temporary Patch for BUG14482558 Fri Jan 11 11:20:16 IST 2013
    WebLogic Server 10.3.6.0  Tue Nov 15 08:52:36 PST 2011 1441050 >
    <06.09.2013 12:24:03 ICT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
    Enter password to boot WebLogic server:
    <06.09.2013 12:24:04 ICT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.management.ManagementException: Booting as admin server, but servername, EMGC_OMS1, does not match the admin server name, EMGC_ADMINSERVER
         at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
         at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
         at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
         at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
         at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
         at weblogic.Server.main(Server.java:71)
    >
    <06.09.2013 12:24:04 ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    wlst:
    wls:/offline>
    what I did wrong? how to start WLS server?

    Hi,
    First of all with EM 12.1.0.x any version you are not required to install wls separately, we have single installer for em and wls. Is there any specific reason you installer wls separately?
    Coming back to your issue: can you check
    %OMS_HOME%\BIN>emctl istart oms completes successfully.
    %OMS_HOME%\BIN>emctl istop oms completes successfully.
    Also open an SR with Oracle support and share the number. We should debug such issue through SR so that we can share logs and come find a root cause.

  • Updates fail to install because Microsoft Database Daemon and SyncServices Host fail to close.  Any help?

    Updates fail to install because Microsoft Database Daemon and SyncServices Host fail to close.  Any help?

    Ask on the Microsoft Mac forums since it's their product you're having trouble with.  these forums only provide support for Apple products
    http://answers.microsoft.com/en-us/mac

  • I recently installed CS4, and I can not make a connection to my website.  Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

    I recently installed CS4, and I can not make a connection to my website.  Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

    Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
    On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
    To open Windows Firewall
    1.
    Click Start and then click Control Panel.
    2.
    In the control panel, click Windows Security Center.
    3.
    Click Windows Firewall.
    Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
    On the Exceptions tab, click Add                     Program.
    In the list of programs, click the name of the program (Dreamweaver) that you                     want to add, and then click OK. If the name of your program is                     not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
    Hope this helps - Joe
    Joseph Lowery
    Author, Dreamweaver CS4 Bible

  • After OEM 12c installation, how to install more plugins?

    I just finished up installation of oem 12c OMS, but forgot to pickup db2 and sql server db as plugins, how to add those in?
    are those plugs ins installed can be used to monitor db2 /sqlserver dbs?

    You can deploy any plugin post install as well. Read this for instructions : http://docs.oracle.com/cd/E24628_01/doc.121/e24473/plugin_mngr.htm#CHDBGHFE

  • Install Plugin Failed

    Hi everyone, im new in this area, i need some help here.
    I already install the e commerce and web crm in 2007A but when i start the synch manager i do my connection i `ve got a problem when i push the install plugin button its said: Install Plugin Failed, i dont know if i have to connect this to function whit the sbo.
    if you can give some kind of help would be very nice.
    Thanks for everything.
    Bye

    Well I guess the first step is to complete the top section (SBO connection) and click "Try Connection" button ... if the connection is successful the flag should turn green.
    Next complete the bottom section (WebTools) and the flag should turn green there as well as soon as you select a webtools database.
    Once you have 2 green flags, click the save settings button at the bottom.
    Finally click install plugin.

Maybe you are looking for

  • How to use SSO with Forms application

    Can somebody explain, how can we configure the SSO with Forms application. I have two application server instances. One for infrastructre and Other for application. Thanks

  • How can I call the Class and have a PDF appear in seperate window?.

    I would like to call the class/interface ZCL_UIU_PRN_ACCOUNT2, method Collect_data and have a Smartform executed to produce a PDF document in a Seperate window. Where I have an issue is in opening another window to display the PDF. I know the Standar

  • Adding a Goal Line to a chart in Webi

    Post Author: geozuh CA Forum: WebIntelligence Reporting Does anyone know how to add a goal line to a chart created in WEbi? It seems like this would be a standard option.

  • My itunes continues to play very faintly after I quit the program, what could cause this?

    My itunes continues to play very faintly after I quit the program.  I actually though I was going crazy but it does continue to play after the program has been shut down.  Very, very low volume though.  I can't pause it or turn it up or down.  I do u

  • Having trouble changing hyperlink color

    Hey everyone. I've been working on customizing one of the default themes and I can't seem to change the color of the hyperlinks to better suit my page. The desired color only shows up when I put the mouse over the hyperlink itself, rather than being