VI to Initialize All To Default Values?

Hi,
Whilst developing LV progs I often use the 'Reinitialize All To Default' option from the Operate menu to clear all previous values at the start of a run.
Rather than doing this by hand or rather by mouse each time is there a vi I can put at the start of my program toReinitialize All To Default values? I've had a look but can't find anything.
Also, when I put a sub vi down in my program I allways right click on it and choose Visible->Label ON so as I know what the vi is. Is there any way I can get LV to do this by default?
Thanks,
Dave.

Dave-
It is a method. Obtain a reference to the VI you want to reinitialize and wire that reference to a invoke node (application control -> invoke node). Then select method -> reinitialize all to default.
See attached screen shot.
Not sure about your second question.
Attachments:
Reinitialize All to Default.jpg ‏32 KB

Similar Messages

Initialize all context values at one shot

Hi,
Is there a way i can initialize all the context values of a view. I mean when i click "Reset" all the values should be cleared at one shot instead of setting each value attribute to space.

Hi Aditya,
Whether you use wdContext.invalidate() or wdContext.reset(), all the elements of the entire context will be deleted and hence the table will be disbaled since it's datasource node has no elements. Each row of a table corresponds to an element in it's datasource node. If you create n elements for the node, those many rows will be enabled. So when you remove all the elements of the node, all the rows of the table will also be disbaled. So you have two options here:
1) After removing the elements, create as many of them as required with the default values.
2) Instead of removing the elments, explicitly access each attribute and set it's value to null or space. It will involve just a for loop:
IPrivate<View_name>.I<node_name>Element elmt;
for(int i=0;i<wdContext.node<node_name>().size();i++)
elmt = wdContext. node<node_name>().get<node_name>ElementAt(i);
elmt.set<parameter1>("");
elmt.set<parameter2>("");
Hope this helps,
Best Regards,
Nibu.
(Please take care to close your solved problem's threads by awarding appropriate points . If you haven't got a solution for your problems, please update the forum on their status. Kindly consider awarding points for helpful answers on SDN !)

Programitically Reinitialize Specific Front Panel Controls To Default Values

Hi everyone, I know I can re-initialize "all" controls to their default values using an Invoke Mode. How do I re-initialize only specific controls I want to re-initialize to their default value? Basically, I want to re-initialize all the controls except for one control. I want to do this during run-time of the VI.
Thanks so much!

In your situation, I would probably just reinitialize all and then immediately set the value of that one control. Your alternative is to use the Reinitialize Value method for each and every control except that one. You could do this in a FOR loop easily enough.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Any opinions on setting default values on Business Partner level?

Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.

Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values.

Personalization and Default values in selection screen variables

Hi everyone,
I have certain questions regarding Front end part:-
1)     Can we have multiple personalizations for a single user in Web templates; I know it is quite possible in BEx using Variants. Is there any such approach or any other solutions regarding it?
2)     In our project we had a range selection screen customer exit variable on 0CALMONTH, which is showing a default value of 07.2007 to 09.2007, although we have removed the default values from the query variable and also checked the customer exits where it is used, but still its showing the value. We cant delete and recreate the variable as such, as it is used in number of function module. Also these values are also transported to Quality system, where also its showing the same value.
Did anyone face such a situation before?
Eagerly waiting for a solution.....
Thanks in advance

Hi Chiran,
Please try with following approach for multiple   personalizations for a single user in Web templates.
While Defining Variable Choose the Option Copy personalization data from variable .
The Features of above approach is as follows.
1)It will personalize variable values for Input Variables for each user.
2)These values are saved for each variable as well as for user.
3) At the time of defining variable it will allow us to enter one or more default values.All these values are appear in the variable screen when u execute the query or Web Application.
So you can see the variable values in web also.Just try with this approach.
May be it will resove u r issue some extent.
Regarding u r Second Query Just try with Some tables, all the default values entries were saved in those tables. Delete default values from those entries.
Thanks & Regards,
Chandu.

SAP - Release strategy Characteristics Default Value Usage

Hi,
I am currently working on Release strategy where in I wanted to set the Default Values for the Characteristics. However, Even though I have flagged the Default values, system it is not defaulting the same.
Secondly, I tried to use Option CL20N Where the value are apper, but when I Save, It is not stored.
I wanted to know, Is there any setup need to be done for default value or is some thing I am Missing out.
Please Let me know ASAP
regards
Arvind

Maintain the default values in char itself.
Goto CT04 enter your char and in Value tab enter all your default values which will be defaulted while char selection in release startegy.
Note untill the char values are not checked during assigning class and release startegy in CL24N they will not be saved.

How we can find out the default value of the initialization parameters

Hi All,
How we can find out the default value of the initilization parameters from oracle database.
Thanks
Shiju

Hi,
you can find currently used parameter values v$parameter and v$parameter2.
if default values is different real values then you can see alert.log.
because in alert.log you will see non default values, rests is default.
Edited by: admin on May 8, 2010 3:41 AM

Initialize some fields in material master with default values

Hi,
I would like to initialize some fields in material master MM01 with default values.
for exemple in the view MRP1 there is a field MRP type I would like to initialize PD in the field as default value.
but when I go to the technical information there is no parameter id that I can use in SU3.
Do you know how I can the initialize the field those don't have parameter ID?
thank
Dede

Dear Glenn,
This is possible in SAP for this use T code MMD1 and create MRP profile and assign this MRP profile while creating material using MM01 in the organisation level put this created MRP profile. The values you maintained in this profile get copied to the material by default.
To maintain MRP profile go to MMD1->give your profile name...........> click on selection screen push button--->give here profile description--->select what MRP field which u want to make fixed one/default. if make fixed later you can not change--
>click on data screen 1 push button and maintain your value and save
sree

FormsCentral - design form : Initialize form field with default value

Hello,
My customer asks me to initialize text fields with default values. Example , Name , email , phone number etc to be displayed by default till it is overwritten by values entered. Could you please guide me how to achieve this ?
Many Thanks,
Sree

Hi,
see Re: sequencing problem-Forms
Regards Michael

Initializing Control Inputs to default value.

This may be a stupid question, but I am new to labview. When the VI is started I want it to read the data from the PLC(via the OPC Server)initially to set up the controls default value. Then if the user wants to change it, they can type a new vlaue.
Currently every time you start labview in clobbers the data in the PLC with its default value. I thought of using a write on change tag, but then it doesnt show what the current set point is.
Thanks
Thad

If you wanted to get the PLC values before makeing any changes to them, I would recommend using a Tag Read and update your front panel control with the use of a local variable. This would be an initialization routine.
Another possible answer to your question is that you will want to use the Options >> Make Current Values Default selection on your Front Panel. This way anytime your VI is reloaded it will start with these default values.
Thanks,
Bryce

The global variable panel has a menu item under OPERATE called REINITIALIZE ALL TO DEFAULT. How can all global variables be reinitialized at to their default values at program startup?

Each time I restart my application, I would like all global variables to be reset to their default values without having to reset each one individually. Can I do this? If so, how?

Sure you can do it. Enclosed is a VI which checks all VIs in memory and reinitializes any that are of type Global VI.
Attachments:
Reinit_Globals.vi ‏22 KB

How to initialize a default value

The first time the user loads a file, the graph does not display the high
and
low targets. On subsequent loads, the targets show up. I am trying to
work out some bugs on this program but i am have some difficulties with
this problem. i was told to initialize a default value before i start how would i do that. i have attacthed the program and one of the files we were
using . i apologize for the mess of code this is what i am trying to fix
Attachments:
2_17_06_1.DAT.zip ‏1 KB
DisplayFile1.vi ‏136 KB
DrawGraph1.vi ‏271 KB

DUplicate post. See: http://forums.ni.com/ni/board/message?board.id=170&message.id=263260&jump=true
LabVIEW Champion . Do more with less code and in less time .

How to pass some default values in all elements which are blank in xslt.

Hi,
Help needed:
Scenario:
After .xslt transformation, there are some elements which are being mapped but left blank. I want to assign some default values to it like '0'. How to do that.
Thanks.

One solution would be something like this...
http://remysharp.com/2008/08/15/how-to-default-a-variable-in-xslt/
Or you can use a template like this...
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="node()|@*">
     <xsl:copy>
       <xsl:apply-templates select="node()|@*"/>
     </xsl:copy>
</xsl:template>
<xsl:template match="Title">
    <xsl:choose>
        <xsl:when test="string-length(normalize-space(.)) = 0">
            <Title>default</Title>
        </xsl:when>
        <xsl:otherwise>
            <xsl:copy-of select="."/>
        </xsl:otherwise>
    </xsl:choose>
</xsl:template>
</xsl:stylesheet>For every empty "Title" node, this template will add <Title>default</Title>... If the Title has value it won't be changed... You can change this to your fields/your defaults... If you need default for other field just add another template in the same transformation...
Cheers,
Vlad

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

I Cant insert all values to the table But only Default Values r inserted?

Hai,
i can insert only default values to the database. Other values are not shown in DB.
Steps I have done so far:
I have created EO based on VO and VO has the query : select * from emp. Attached to AM.
That AM is attached to the Page. The page consists of employeed details and SAVE button.
Set controller for that page and CO-PR calls create method in AM .
Default values for who columns and SLNo also set through sequence.
In CO-PFR I call apply method which commits the data.
when i run the page and giving values it is not inserted into table but only default values are inserted.
I checked with System.out.println(getattribute("my attr").toString()). It send output correctly.
But y other values are not inserted.?
Anybody plz plz help me in this regard. I am struggling with this for last 1 week. I have to apply this to another realtime scenorio? Deadline is near.
Regards,
Lakshmi Chandiran

Hai Prince,
Thanks for your immediate response. pls find my codes written in EO,AM,CO.
In VO i havent added anythig xcept the query.
The following fields are only getting inserted in the table.
My EOImpl code:
public void create(AttributeList attributeList) {
super.create(attributeList);
System.out.println("NOW I AM IN CREATE METHOD");
OADBTransaction transaction = getOADBTransaction();
Number EMP_ID = transaction.getSequenceValue("Employeeid");
setEmpId(EMP_ID);
setCreationDate(transaction.getCurrentDBDate());
setStartDate(transaction.getCurrentDBDate());
setLastUpdateDate(transaction.getCurrentDBDate());
setCreationDate(transaction.getCurrentDBDate());
VO:
select * from emp1
AM:
public void saveForm()
OAViewObjectImpl empvo = getEMP_VO();
System.out.println("NOW I AM IN AM SAVEFORM OF EMTS");
if ( !empvo.isPreparedForExecution())
empvo .executeQuery();
Row prow = empvo .createRow();
empvo .insertRow(prow);
prow.setNewRowState(Row.STATUS_INITIALIZED) ;
System.out.println("NOW I AM IN ROW CREATED");
public void commitdata()
System.out.println("commitMethod()") ;
getDBTransaction().commit();
CO:PR & PFR:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if(!pageContext.isFormSubmission())
pageContext.getApplicationModule(webBean).invokeMethod("saveForm",null);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule EMP_AM = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)EMP_AM.findViewObject("EMP_VO");
if ( pageContext.getParameter("BtnSave") != null )
pageContext.getApplicationModule(webBean).invokeMethod("commitdata");
s1 = (String)vo.first().getAttribute("Empname");
s12 = (String)vo.first().getAttribute("Emptype");
s3 = (String)vo.first().getAttribute("Emporg");
s4 = (String)vo.first().getAttribute("Empcity");
System.out.println(" values are " + s1+s2+s3+s4);
here i can get the values correctly printed in output as entered in the form.
I dont know where the problem is.
plz help me.
Thanks in advance,
Regards,
Lakshmi Chandiran

VI to Initialize All To Default Values?

Similar Messages

Maybe you are looking for