Video and Audio cut off in Premiere CC after Syncing in PluralEyes 3

So I sycronized this sequence in PluralEyes 3. I exported it as an XML for Premiere Pro. I imported the XML into Premiere Pro CC. When I oppened up the sequence the end off all the clips are missing audio and video. More is missing for the longer clips. You can see how the clips are blocked off. I have video from a T3i and a K-x and audio from an H4N. Running OSX Mavericks on a Macbook Pro 15in Retina w/ Nvidia 650M 1G. Anybody have a solution or know why it's doing this?
Thanks

Figured out that this happens if you import your assetts into premiere. Create a sequence. Export an XML from Premiere to PluralEyes. Sync it. Create an XML for Premiere and then import it into Premiere.
It works properly if you start in PluralEyes with your assetts and then Impot the synced XML into Premiere. Its a shorter and smarter way to do it anyway. I was trying to do it the way I used to on PC.

Similar Messages

  • Video playback audio cuts off after few second

    Pictures are fine but audio cuts off sometime around 5-10 seconds for the entire duration of the video unless you skip the video further a few seconds where the sound cuts off,audio are back but only for maybe 1 or 2 minutes then if you repeat the same step audio are back but again for only a few minutes,only occurs when not using headphones,but when I am using headphones video and the audio plays fine for the entire duration of the video.It annoys me as I don't usually use earphone.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all videos and resync/redownload
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Timing goes out and audio cuts off at end of published slide sequence

    Hi
    I am experiencing a problem with timing and the sound cutting off at the end of a slide sequence.
    Here is my work flow:
    I record what I want my slide show to say, add my music and sound effects in Soundbooth. I then create a mp3 file for my slide show.
    I adjust my slide show timing to match my voice over, ensuring that the total number of minutes and seconds the slide show equates to matches the length of my audio. I then import my audio into my project while maintaining the slide timing.
    If I preview the individual slides to match the timing of the arrival of words or pointers in my presentation by pressing the play button in Captivate, everything is great.... until I publish to a .swf file.
    On a 2m:50sec slide show of 22 slides it cuts off approximately 5 seconds before the end. My timing which I have bent my brain on getting right, is out and appears to worsen the longer the slide show is or if it is not on the latest and greatest Mac powered computer.
    I have gone so far as to increase the length of time on the last slide 5 seconds beyond the length of time that the audio occupies as well as adding another 5 seccond blank slide and still have the same cut off problem. No ideas how to help the poor souls who might not have an amazing computer to watch the demonstration on?
    Interestingly if I publish and look only at the last 3 slides or if I look at a short sequence of slides or at a slide in isolation, my audio is there as it should be along with the timing. It would appear that the time "lost" or a lag between the presentation and the audio is the culprit.
    Kindly advise if there is a solution to this or whether the problem lies with something I am doing.
    Thank you in advance

    Has there been any new developments on this problem?
    I've been having to do some crazy work arounds to avoid audio cutting off at the end of slides when using CP5 for development.
    Then this week I had to review an old training which was published a long time ago only to discover that the same issue of audio cutting off is happening there.
    These materials were developed using CP4 and some even with CP3.  This means that the problem/change is not CP5 but probably something to do with the Flash player version because at the time of publshing the older files did not have this issue.
    This has me really worried.  There is no way I can go back and update all the old files and it means that previously perfect materials are now being viewed with audio cutting off.
    Have the Adobe Captivate developers considered the possiblity that this may be a flash player issue?  Have you discussed this with the Adobe Flash developers?  Will there be a fix for this anytime soon?
    Thanks,
    Aimee

  • I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

    Why is FCPX not allow me to cut both video and audio tracks at the same time?
    My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

    fulei wrote:
    The audio track does not edit along with the video. They go out of sync
    Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
    Russ

  • Video and audio (in one direction only) deteriorate after about 90 seconds

    I begin a two-way video chat as normal, both parties can see and hear clearly. After about one and a half minutes of normal video chat, the person on the other end suddenly starts getting a highly pixelated image of me, and they start to lose chunks of audio from me. Meanwhile I continue to get a very nice clear video and audio from them. We usually end up closing the chat, because they are unable to hear or see me enough to continue.
    The first 1.5 minutes or so is always clear, it starts after that. I always receive good audio and sound from the other party throughout the chat. I have never had problems receiving video/audio.
    It happens with most (but not all) people I connect to. I am in California, and I always have this trouble when connecting to a relative in Connecticut. I have the problem again with one relative in Sydney Australia, but not with a different relative in Sydney. These are just a few examples by location.
    I have repeatedly tested my connection speeds, and I have good up and down speeds - more than the minimum requirements. (My speed today is 8200 kb/s Down, 1309 kb/s up).
    I have also tried:
    Checking my Quicktime settings - (set to 1.5 Mbps T1/Intranet/LAN)
    Bypassing my Airport modem/router, by connecting directly by ethernet to my Comcast cable modem (which has no router built in)
    Replaced the cable modem with a brand new one.
    Changed locations - tried it at a friend's house, still had the same problem.
    So, I think I have isolated the problem to my PowerBook. This PowerBook used to do iChats really well for at least 18 months. I have been having this issue for about 5 or 6 months now. I have no idea what the problem could be. Any tips would be much appreciated.
    Thanks, Martin
    My setup:
    ISP: Comcast Cable (Cable modem)
    Apple Airport Exteme Base Station
    Powerbook G4 1.67Ghz, 1 GB RAM, 80 GB HD
    O/S: Tiger 10.4.10
    iChat 3.1.8 (with Chax)
    External iSight camera

    With Comcast.
    Try rebooting the Modem.
    This seems to refresh the connection in some manner.
    Also speak to them. They may not admit any connection management but thing may "magically" get better.
    1:17 PM Wednesday; August 29, 2007

  • Video and audio not synchrone with apple tv after update mountian lion on macbook pro

    i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????

    Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
    I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
    Playing light, locally hosted steam sidescrollers  like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
    Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
    It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
    Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

  • Please help! Video and Audio Cut Out of Project Made in FCE, Burned in iDVD

    I made a 20 minute movie in FCE 4 and burned it onto a DVD using iDVD (I have a MacBook that runs Mac OS X Snow Leopard). For some reason, when I watch the DVD, both the audio and the video cut out approximately five minutes into the movie. The audio and video both cut to black at exactly the same time and never come back. I haven't inserted any chapter markers or anything, so I know that's not the issue. Any idea what the problem might be? Thanks in advance.

    Open the exported file in the QuickTime player. Does it play all the way through correctly? If yes, you should try the question on the iDVD forum. If no, report back what you've got in the QT player.

  • When recording, strange noises and audio cut offs

    When i open garageband and record a basic track (no other programs running), randomly, a scratchy noise that kinda sounds like a distorted, heavy metronome, comes from the left speaker or left headphone.
    This noise is not recorded, but comes out very loudly in the monitor.
    Also, when recording a basic track, the output audio will completely shut off from the monitor and from everything, but Garageband continues to record and the recording is not affected. This is a huge problem especially if im using a metronome or layering tracks. This does not affect iTunes or anything, JUST GarageBand
    please help! should i bring it into a MacGenius?

    Hi ladyshade666-
    Does it make this noise if you run the Mac with only the mouse, keyboard and monitor attached?
    Are you absolutely sure the sound is coming from within the Mac? I have had a couple of FireWire disks that when connected inject all kinds of noise into my amplified speakers. I turn the drives off when I am in the studio.
    Reverse polarity is very dangerous and will cause early demise of power supplies. You may also get yourself electrocuted. It may very well be the noise-causing difference in tour scenario.
    I think your first call should be to an electrician.
    Luck-
    -DaddyPaycheck

  • FR: Keep Video and Audio clips Linked in Multicam once razored

    Here is my feature request, if you agree please cut and paste and submit to feature request!
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    *******Enhancement / FMR*********
    Brief title for your desired feature:
    Keep Video and Audio cuts in a Multicam sequence linked together when using the razor tool.
    How would you like the feature to work?
    Whether inside a multicam created sequence, or a multicam sequence that has been pasted into another layer on a separate sequence, I want the video and audio to remain linked together when a cut is made. Currently, when I make a cut, the audio and video become unlinked and I have to first a. make all the razor cuts, then b. go and relink the video and audio clips back together. Takes an extra 30 minutes every time now.
    Why is this feature important to you?
    To save time and stop the long redundant process of click selecting the video and audio and linking them, over and over and over, in a multicam sequence. Obviously if I can do it manually, it can also be done in-program.

    When you create the multicam sequence manually (still the best way, I think), video and audio remain linked.

  • Mpeg2 DVD VOBs Video and Audio into QuickTime ?

    How can I read the mpeg2 VOB files from some DVD that we created into QuickTime Pro with the MPEG2 playback component ?
    We have an app that does video and audio processing built on QuickTime. After the processing is done the result is written to an mp4 file using QuickTime export. We now have to be able to read DVDs that we create into this app (QuickTime), and after processing we must se the QuickTime export option to create the mp4 file. These are not commercial DVDs and are not copy protected. I'd like to just be able to read the mpeg2 video and audio directly into QuickTime but I haven't yet found a good way to do this. Here is what I have tried:
    1) I can read individual VOB files with QuickTime, but I don't get any audio and I need all the VOB files as one.
    2) I have used MPEG Streamclip to open the DVD VOB files and exported the demuxed mpeg2 video and aiff audio. Both files open together in QuickTime but since the total size of the video is over 4 GB the video and audio are off and drift more so throughout the video.
    3) I used libdvdread to read the DVD and create a single MPEG2 file. This can be read by QuickTime but I don't get any audio. From what I understand this is muxed video and audio which QuickTime doesn't understand, but is playable by VLC.
    I think I could probably ulibdvdread to read the VOB files into a muxed MPEG2 file, then use ffmpeg to convert this to a very large DV stream, then import that into QuickTime, but there has to be a better way than to do the lengthly and large file size conversion to DV which is not a format I ultimately want.
    Before we go and write our own, I'm looking for a simple way to read the mpeg2 video and audio from a DVD format directly into QuickTime and preferably something that can be integrated into our app and not use another commercial stand alone app.

    OK, I can't tell you what we are doing, you'll have to trust me that it's for a very good cause. I'll simplify the use case as an example. If I can do the following we'll be OK:
    1) Read video/audo files from a DVD that we created
    2) Open these files with the QuickTime Player, click on Export to Apple TV to create an output file.
    I'd rather not do an interim conversion of the video data (like use a 3rd party app to convert to mp4 first and then read into QT, but I'm considering a conversion to DV) because that could seriously hurt the apps effectiveness. I also can't use another app (MPEG Streamclip, HandBrake, VisualHub, etc.) to do the conversion.

  • Video and Audio not synced on .mov file in final cut, but perfect in QT!

    I recently just captured a miniDV tape onto final cut. I captured it in 23.98fps. After I captured it and opened it up in final cut's sequence, the video and audio was not synced at all. it's way off and even when i try to move the audio around on the timeline and get one voice synced up, about a minute into the video it's off again.
    i tried opening the video in quick time under the captured scratch folder, and when it plays in quick time, it's perfect. there is no sync problem at all. only when i open it in final cut is there a problem.
    does anyone know how to fix this or what is going wrong?!
    HELP ME

    well i mean we recorded it in 24PA, which is what we've been doing for this project of ours. And when we go to capture in final cut we choose the Advanced Pull Down setting. So in the end, our video is in 23.98 fps.
    I just thought I'd mention that just to give more details. idk if it's helpful or not

  • Audio cuts off then video moments later for Jabber users when content is shared during a multipoint VC

           If a presentation* is being shown from a VC end point/or by Jabber, the audio cuts off, then the video of the Jabber user freezes. The call has not ended on our end we can still hear and see them. A few moments later their video on our end freezes and the audio is lost. The call is finally terminated a few moments after.
           When this happens to the Jabber participant they either have to restart Jabber or in some case have to reboot their PC
           The Jabber participant can be cut off from their class 2 to 3 times  throughout the duration of the class
           This happens over all the MCU\blades, so doesn’t  appear to be blade specific
           Only appears to happen in multi –point conferences not in point to point calls
    *Presentation: This can be anything from a word document, to a PowerPoint presentation to a web browser
    The warning they receive says:
    The application has encountered a terminal problem.
    Location:
    Message: assertion failed. (link_ret = = GST_PAD_LINK_OK)
    Domain: <no domain>

    Is this problem specific to Jabber clients, or Jabber Guest? If the former, you'll have better luck over on the Jabber client forum:
    https://supportforums.cisco.com/community/4551/jabber-pilot-support

  • Cutting and saving individual video and audio files from a clip

    I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

    Without knowing more about your project, it's hard to even guess at the most efficient workflow.
    Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
    As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
    Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
    Good luck.
    Russ

  • I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync.  They work fine when played in Quicktime.

    Hello,
    I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program.  It appears to work fine in Quicktime.
    Thanks in advance.

    mbgoodwi
    Thanks for the reply. This is the plan.
    Open Premiere Elements 12/12.1 to the Expert workspace.
    In the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, select the project preset
    NTSC
    AVCHD
    AVCHD LITE 720p30
    OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
    Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
    Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
    into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
    Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
    There should be no colored line over the content if the project preset matches the video properties. But, if you do see
    that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
    the Render button above the Timeline.
    Do your video/audio now play back in the Edit area monitor in sync?
    Please let us know the result, and then we will decide what next.
    Thanks.
    ATR

  • Premiere Pro 2.0 compatable video and audio formats

    I am working on a project that uses old vintage newreel clips and such from the 50's and 60's, they are available for download in several different formats.
    I have downloaded many of them but when i import them into my timeline, there is no audio for these clips. They work when i just play them out of premiere. What are the supported formats for premiere pro 2 both in video and audio?
    I have made several movies but haven't come upon this issue before.

    Welcome to the forums.
    The following links will help you:
    FAQ: How do I import xyz format files?
    FAQ:How do I convert my files?
    FAQ:Why is there no audio in my imported MPEG file?
    Cheers
    Eddie

Maybe you are looking for