Video capture and system properties

Hello,
Two questions on mmapi and video capture:
1. On a Samsung SGH-A707 phone, I get a return of 'false' when running
System.getProperty("supports.video.capture"), indicating that it won't
allow video capture thru mmapi. However, when running
System.getProperty("video.encodings"), it returns
'encodings=video/H263'. Isn't this a contradiction? If it doesn't
support capture, why would it show an encoding? Does the return of false
absolutely mean that the phone doesn't support video capture?
What am I missing?
2. On an LG CU500, I get a return of 'true' when running
System.getProperty("supports.video.capture"), indicating that it will
allow video capture thru mmapi. However, running
System.getProperty("video.encodings"), it returns 'encodings=jpeg'. How
is jpeg a video encoding? Isn't this only for snapshots? Do they mean
motion-jpeg?
These are both new-ish phones, and both support video capture natively
(outside of java).
Last question: How widespread is support for video capture thru j2me?

Hello there,
And welcome to Apple Discussions!
I have recently bought a fifth generation ipod, and have used the video capture feature.
First of all, this should have been posted in the +5th generation iPod Nano+ forum instead of the *5th generation iPod Video* one. Here is the link to this forum for future references.
http://discussions.apple.com/category.jspa?categoryID=265
When I sync the ipod to itunes on my mac, will I lose this video capture?
No. Videos you take on your iPod have to manually be removed from the iPod either through the iPod itself or by opening up the necessary folders and files on your iPod through Windows Explorer.
And if so, how can I sync the ipod to a new itunes library without losing the video recording I did on the ipod?
Why would you need to worry about this? Was your nano previously synced with another iTunes library? If not, all you should have to do is hook it up to the new iTunes library and you should be good to go. For instructions on how to remove videos from your iPod, see pages 55-56 of your iPod's manual, which can be found below.
http://manuals.info.apple.com/enUS/iPod_nano_5th_genUserGuide.pdf
Hope this helps.
B-rock

Similar Messages

Mega simple video capture and edit program. Cross platform.

Looking for a mega simple video capture and edit program. Am overseeing a bunch of small groups where we want each person in the group's story told. Some groups will have Macs, some PCs, some iPads, iphones, etc. So needs to be cross platform.
Really, the simpler, the better. Like targeting 5 year olds

Is there any software anyone recommends - Sorenson?
I am capturing regular dv from minidv.

Going to do a video capture and it is blurry

I got my new mac book on Thursday of last week.. I did two videos on my new Imovie 11 and they were great. Today I go to create another video (capture) and it is blurry, like it has some special effect on it. I check and there are no effects that I can tell.. Can you help?

dang it! haha. right in front of my face. I thought there was a way to do it with quicktime but couldn't find it. I guess I didn't look hard enough. and the Help doesn't tell you this at all, although maybe I didn't use the right words for Help.
thanx.

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Video capture and than transmit it

After I made live video capture from (and play it with Man Media Player) I want to transmit this stram (using RTP) to other computer. How could I do this? Thank you.

I used VideoTransmit.java sample from Sun (JMF solutions...). My problem is: I want see what I transmit. For this I need a Player for my Data Source. If I used a player for my Data Source I cann't used it for transmit. It is already allocated. I could clone my data source and use one for player and the other one for transmit. It works thus. I tried it. But the stream locks from time to time. I need other solution. If I used JMStudio->File->Transmit... the stream is played and transmited very good.

Audio video capture and combination Nintendo64

Hi
I was hoping that someone could help me with mixing a video and audio signal for live playback.
I have a N64 with its video component hooked up to my TV capture card, and the audio connected to the line in on my sound card.
the computer i'm using has a fresh install of arch, with xfce. I currently just have alsa installed, as far a sound stuff goes and everything is working fine.
right now i can see the video from my nintendo with "QT V4L2 test utility" which is all good. I can't make this video full screen or any bigger. I do know i can use cheese to view the video in full screen, but it does not handle any audio.
so, what program can i use? or how can i play captured audio live?? is there a program (something like cheese or not) that can handle the capture and playback of both audio and video????? the latter is prefered
any input would be good, some ideas could help me along
thanks guys

ok cool VLC seems like a good option, i can capture the video just fine becasue i know the video device name is /dev/video0 but i don't know what the audio device name is..
i have been looking online for a way to find this out. but i have not yet found a way to tell me what the audio device name is for my sound card. (i have the audio input connected to a PCI sound card)
i just found this which helped a bit
http://forum.videolan.org/viewtopic.php?f=32&t=81166
it turns out that when i have a look the sound card i want to use is alsa://plughw:0,0
so i go -> show more options -> play another media synchrously and enter alsa://plughw:0,0. all goes well
Last edited by marno11 (2011-08-18 10:18:26)

Audio video capture and stream

hi anyone, i need some source code for my application.
i've got a task from my school to build an application that could capture and stream audio video file..
if you could help me, please send me the code (more simple code is better, coz i'm a beginner)
btw, i use JMF 2.1.1e
thanx before

hello any body knows how to read a .wmv file using jmf

Digital video capture and the K8T Neo

I was wondering if anyone has had any luck capturing digital video with a machine based on this motherboard. I've tried using various programs, including Adobe Premiere Pro, Scenalyzer, DVIO, and Movie Maker. Regardless of what I use, I end up with enough dropped frames to make the video very choppy in places, especially if I try to capture type-2 (video for Windows) DV, as Premiere Pro requires for editing.
Here's my setup:
MSI K8T Neo
AMD Athlon-64 3400+
2 X 512 MB KingMax PC-3200 RAM
Hercules RADEON 9800 Pro graphics
1 X Maxtor 60 GB Ultra ATA hard drive (model 5T060H6)
2 X Maxtor 250 GB SATA hard drives (model 7Y250M0)
Plextor 708-A DVD+/-RW
I've tried the following configurations of hard drives with no success:
500 GB RAID0 array on Via controller, 60 GB drive on tertiary IDE, running from one drive and capturing to the other
250 GB drive on Via controller, 250 GB drive on Promise controller, 60 GB drive on secondary IDE, tried capturing to each
I've run some tests of disk write speeds, and they seem more than adequate for video capture (approximately 50 MB/s write for the SATA drives, 25 MB/s for the Ultra ATA drive).
I've read that there were issues with PCI bus throughput with slightly older Via chipsets, and that there have generally been issues with Via ATA controllers.
So, has anyone successfully used this motherboard to capture digital video? What did you have to do to prevent frame drop?
Thanks in advance for any advice...

I was wondering if anyone has had any luck capturing digital video with a machine based on this motherboard. I've tried using various programs, including Adobe Premiere Pro, Scenalyzer, DVIO, and Movie Maker. Regardless of what I use, I end up with enough dropped frames to make the video very choppy in places, especially if I try to capture type-2 (video for Windows) DV, as Premiere Pro requires for editing.
Here's my setup:
MSI K8T Neo
AMD Athlon-64 3400+
2 X 512 MB KingMax PC-3200 RAM
Hercules RADEON 9800 Pro graphics
1 X Maxtor 60 GB Ultra ATA hard drive (model 5T060H6)
2 X Maxtor 250 GB SATA hard drives (model 7Y250M0)
Plextor 708-A DVD+/-RW
I've tried the following configurations of hard drives with no success:
500 GB RAID0 array on Via controller, 60 GB drive on tertiary IDE, running from one drive and capturing to the other
250 GB drive on Via controller, 250 GB drive on Promise controller, 60 GB drive on secondary IDE, tried capturing to each
I've run some tests of disk write speeds, and they seem more than adequate for video capture (approximately 50 MB/s write for the SATA drives, 25 MB/s for the Ultra ATA drive).
I've read that there were issues with PCI bus throughput with slightly older Via chipsets, and that there have generally been issues with Via ATA controllers.
So, has anyone successfully used this motherboard to capture digital video? What did you have to do to prevent frame drop?
Thanks in advance for any advice...

Video capture and computer sync

Hi,
I have recently bought a fifth generation ipod, and have used the video capture feature.
When I sync the ipod to itunes on my mac, will I lose this video capture?
And if so, how can I sync the ipod to a new itunes library without losing the video recording I did on the ipod?

Hello there,
And welcome to Apple Discussions!
I have recently bought a fifth generation ipod, and have used the video capture feature.
First of all, this should have been posted in the +5th generation iPod Nano+ forum instead of the *5th generation iPod Video* one. Here is the link to this forum for future references.
http://discussions.apple.com/category.jspa?categoryID=265
When I sync the ipod to itunes on my mac, will I lose this video capture?
No. Videos you take on your iPod have to manually be removed from the iPod either through the iPod itself or by opening up the necessary folders and files on your iPod through Windows Explorer.
And if so, how can I sync the ipod to a new itunes library without losing the video recording I did on the ipod?
Why would you need to worry about this? Was your nano previously synced with another iTunes library? If not, all you should have to do is hook it up to the new iTunes library and you should be good to go. For instructions on how to remove videos from your iPod, see pages 55-56 of your iPod's manual, which can be found below.
http://manuals.info.apple.com/enUS/iPod_nano_5th_genUserGuide.pdf
Hope this helps.
B-rock

Problem with Video Capture, and question towards solution

Yesterday I worked on a commercial for which we captured 9 clips (roughly 10 seconds or shorter in length). The clips all had text/titles superimposed on them by an outside machine and looked good in the monitors when they were exported and captured into FCP (ie: none of the text was chopped off).
I edited the commercial and then was exporting it out, only to discover that the text on the bottom of the clips was getting chopped off.
My first question is this: is there some setting in the capture process that could have done this? something that might have gotten tweaked accidently, or corrupted in some manner? Didn't have this problem with footage captured the previous day. And since it looked good before it was put into FCP, thinking it had to be a problem with FCP.
Also, in trying to tweak the footage in FCP, I came across a 'there must be an easier way to do it' question. Is there a way to alter parameters on multiple clips (such as raising them, like I had to)? I tried selecting all and double clicking, hoping that the changes I made would affect them all, but it only affected the one I directly clicked. I'm sure there's something simple (and obvious) that I'm overlooking...
thanks!

For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

Video capture and JavaFX

I've run throgh few threads in this forums and the sites, but I could not find when (and if) video capture will be supported by JavaFX (audio is not a major problem, as it is supported in JRE). It is possible to know something about it ?
Where any roadmaps for future releases (in terms of contents / release dates) are published ?
Thanks.

JavaFX does not support flash streaming.
JavaFX does support http live streaming: http://en.wikipedia.org/wiki/HTTP_Live_Streaming
JavaFX does not support audio/video capture (there are other java/native libraries that do that).
See:
Video camera capture/streaming: example implementation "Thread: Video camera capture/streaming: example implementation"
http://javafx-jira.kenai.com/browse/RT-3458 "Camera and Microphone" (go vote for this jira to get some capture technology built into JavaFX).

Blu-Ray video capture and burning with G4 Power Book ??

Good afternoon.
Has anybody figured out this route with a G4?
If so, please explain in nauseating details! Hardware, software, etc.......
Thanks for your time!

Thanks for your reply.
It's also my understanding that OS X doesn't natively offer Blu-Ray support, and that an external Blu-Ray player/burner is required (see OWC) along with capture and burning software (Toast 10).
I'm wondering if anyone has tried and succeeded.

Video Capturing and Transmission

I would like to create video streaming application, that i want to capture a video by using the webcam and then store in a buffer area that created, then the video is streaming out through network from the buffer.My problem is how do i create a buffer and save in it after capturing the video using JMF?I am a beginner to JMF. I appreciate any
examples and advice.
Many thanks in advance.
littebin

Hi,
You can use RTP Transmission for Transmission which will transmit your live Video. In the same system you can RTP Receiver through which you can store the Live Video.
Thanks
With Regards,
Navanee

Problem with video capture and transmission

Hello..
I have written an application to capture video using a webcam and transmit it using RTP URL..It did work..
When the user wishes to stop capturing i would stop the processor and deallocate it.. If the user wishes to start capturing again i would just start the capturing process once again(using the same procedure i followed the first time)..
When i do this i get an exception stating:
The capture device is already in use..
Cannot create the RTP Session: Can't open local data port: 5000
(Note: I used the same port for transmission for the first time)
Is there anything that is needed to be done to release a device and port at the end of the program..
Thanks in advance!!

Thanks.. The problem was solved when i closed the processor and its data sources..
One more doubt.. Isnt it possible to transmit and receive Images through RTP..
When i try to create a Processor for and image located in my system "E:\image.jpg" i get an exception like :
Cant create Processor for "E:\image.jpg"..
Thanks for the reply!!!

Stuttering video/audio and system crashes?

For the better part of this year, I've had a terrible time with video and audio stuttering on my MacBook (Sept. 2007; 2.16GHz, 4MB RAM). This was especially noticeable when watching streaming Netflix videos, and it didn't seem to matter if I was using Safari or Firefox. Clearing the browser cache has little to no impact.
The problem appears to have worsened since I upgraded to Snow Leopard about two months ago. (I'd previously been using OS 10.4.11; I now have 10.6.7). This same problem now impacting YouTube and QuickTime, even when I'm viewing files on my hard drive (approx. 27 GB free on a 120 GB drive), so I doubt that my internet connection is to blame. This happens whether I'm on WiFi or on an Ethernet connection -- also, my Ethernet randomly decides to stop working, but that's (probably) a separate issue.
(Also since my OS upgrade, I'm suddenly having battery issues as well.)
The problem is sometimes so bad that the entire system crashes, and I'm forced to do a cold/hard reboot of my MacBook. This has happened twice within the past 24 hours. Mostly, I can watch a few seconds or sometimes several minutes of video before the video and audio start sticking and stuttering again -- so pretty much any video capability is nearly worthless to me at this point.
Here's the Panic Report from my latest system crash this morning... I don't know how to read Panic Reports, so I'm hoping someone might spot something that I can fix to address this issue?
Interval Since Last Panic Report: 69709 sec
Panics Since Last Report:          1
Anonymous UUID:                    0FEDE34F-A36E-41ED-B143-B31AFF61812B
Wed Jun 8 09:59:42 2011
panic(cpu 0 caller 0x28f17d): "pmap_flush_tlbs() timeout: " "cpu(s) failing to respond to interrupts, pmap=0x5fd71d0 cpus_to_respond=0x2"@/SourceCache/xnu/xnu-1504.9.37/osfmk/i386/pmap.c:3561
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x420fbb28 : 0x21b510 (0x5d9514 0x420fbb5c 0x223978 0x0)
0x420fbb78 : 0x28f17d (0x597130 0x5fd71d0 0x2 0x73bd000)
0x420fbbe8 : 0x2939ff (0x5fd71d0 0x1760a000 0x0 0x41f42221)
0x420fbd78 : 0x254f7c (0x5fd71d0 0x1760a000 0x0 0xbddb8)
0x420fbde8 : 0x257f97 (0x416911c 0x5fd71d0 0x1760a000 0x0)
0x420fbf38 : 0x2aa430 (0x78dc148 0x1760a000 0x0 0x3)
0x420fbfc8 : 0x2a081a (0x762d0a0 0x0 0x10 0x5341064)
BSD process name corresponding to current thread: plugin-container
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
System uptime in nanoseconds: 35391390659717
unloaded kexts:
com.apple.driver.CSRHIDTransitionDriver          2.4.0f1 (addr 0x42077000, size 0x12288) - last unloaded 24672258926767
loaded kexts:
com.google.driver.Gild          1.0.0 - last loaded 24609888691244
com.apple.driver.AudioAUUC          1.54
com.apple.driver.AppleUpstreamUserClient          3.5.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleIntelGMA950          6.2.6
com.apple.driver.AppleMCCSControl          1.0.17
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleHDA          1.9.9f12
com.apple.driver.AppleIntelIntegratedFramebuffer          6.2.6
com.apple.driver.SMCMotionSensor          3.0.0d4
com.apple.iokit.AppleYukon2          3.2.1b1
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros21          424.14.5
com.apple.driver.ACPI_SMC_PlatformPlugin          4.5.0d5
com.apple.driver.AppleLPC          1.4.12
com.apple.driver.AppleBacklight          170.0.34
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBTrackpad          200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver          200.3.2
com.apple.driver.AppleUSBTCKeyboard          200.3.2
com.apple.iokit.SCSITaskUserClient          2.6.5
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleFWOHCI          4.7.1
com.apple.BootCache          31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.iokit.IOAHCIBlockStorage          1.6.3
com.apple.driver.AppleUSBHub          4.1.7
com.apple.driver.AppleAHCIPort          2.1.5
com.apple.driver.AppleUSBEHCI          4.1.8
com.apple.driver.AppleUSBUHCI          4.1.5
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleACPIButtons          1.3.5
com.apple.driver.AppleSMBIOS          1.6
com.apple.driver.AppleACPIEC          1.3.5
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          105.13.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.11
com.apple.driver.AppleIntelCPUPowerManagement          105.13.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.0f1
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.DspFuncLib          1.9.9f12
com.apple.iokit.IOAudioFamily          1.8.0fc1
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleHDAController          1.9.9f12
com.apple.iokit.IOHDAFamily          1.9.9f12
com.apple.iokit.IO80211Family          314.1.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.AppleSMC          3.1.0d3
com.apple.driver.IOPlatformPluginFamily          4.5.0d5
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.driver.CSRUSBBluetoothHCIController          2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController          2.4.0f1
com.apple.iokit.IOBluetoothFamily          2.4.0f1
com.apple.iokit.IOUSBHIDDriver          4.1.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.5
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6
com.apple.driver.AppleUSBMergeNub          4.1.8
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.5
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.driver.XsanFilter          402.1
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOUSBUserClient          4.1.5
com.apple.iokit.IOAHCIFamily          2.0.4
com.apple.iokit.IOUSBFamily          4.1.8
com.apple.iokit.IOHIDFamily          1.6.5
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.2
com.apple.driver.AppleACPIPlatform          1.3.5
com.apple.iokit.IOPCIFamily          2.6
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.17f0
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x87), Atheros 5416: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: MATSHITADVD-R   UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x1d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000

Definitely not. I've got a 2007 MacBook, and even with the extended warranty that coverage expired a year ago.
If you're concnered about cost, you could always call and ask. In my experience, the people at the Genius Bar (and Apple Store in general) are happy to provide assistance free of charge. If you have to replace a part, system, etc. you'll certainly need to cover that, but they should talk to you about costs and get your consent before doing any work on your machine.

Video capture and system properties

Similar Messages

Maybe you are looking for