Video Conferencing in internet

I am doing video conference coding using jmf in internet.Instead of doing peer to peer,is it possible to do it in multicast?if yes,what about multicast route enabling?is thier any charge for enabling?Any software for enabling is available or we have to ask isp providers?please help.....

I am doing the Desktop Sharing feature with JMF. It's working fine but the pblm is with the CPU usage, which is 100% while sending the captured screen to the client machines. It affects the other modules which is integrated with this Desktop Sharing
I am capturing the screen in the following way
DataSource = Manager.createDataSource(new MediaLocator("screen://"));
The format in which I am sending the screen is,
VideoFormat vf=new VideoFormat(VideoFormat.JPEG_RTP,size,Format.TRUE,Format.byteArray,2);
Can any one suggest a way to reduce the CPU usage
Thanks in advance

Similar Messages

Video Conferencing in internet--Proxy net Connection

I am doing video conferencing project in internet....We are having internet connection in lan....Internet connection we are having only one line.....From that we are having proxy net connection to all systems.If i transmit video from outside (not in lan) to inside proxy net connected system means....what can i do ?will u please help in this matter?

Hi Nivaz,
We are facing the same problem now . Since you have posted this long back, you might have got a solution by now . Please share with us.
Thanking you in advance
Arun Kumar A P
[email protected]

Video conferencing between CCM and CCME

Hi,
We are having CCM4.1(3)at central location.In branch location we are having CCME 4.0(2).Both the locations are connected through leased circuit. We enabled Video on IP Phone which is registered to CCM and also we configured CCME for video. When we start doing video conferencing between these two location, it's not happenning. In VT advantage it is showing local image on Local & Remote screen. I don't know what is the problem.
Can you guys please tell me wheather Video Conferencing will work between CCM & CCME over the leased circuit using VT Advantage.
If it works, please tell me what are configuration parameters i need to configure on CCM & CCME.
Thanks & Regards

By default all IP traffic is permitted through a VPN tunnel except broadcast and multicast traffic. It basically is a matter of how the video software you are using works. If it is a multicast application then it will not work through an ipsec tunnel, if it is a unicast application then it should be able to work.
Also if this video is on the Internet tries to enable split tunnel on the VPN endpoint. Now if the issue is with a video that is on the PC, this might be because a software corruption of the OS, so try reinstalling the VPN Client software

Video conferencing software

I am coding this video conferencing software that 6 people can login and have a videoconference. This is a web-based package using applets. I started using JMF by downloading JMF from sun web site. I also found out this site that give examples.
http://www.cs.odu.edu/~cs778/spring04/lectures/jmfsolutions/examplesindex.html
But to transmit the video it is asking for the destination IP. The applets I am building will ask the IP address of the user but what really come are the routers IP (if the user is in LAN). So what will happen is the software will send the video to the router.
My questing is what will happen to the video stream?
Will it go to the place I want?
For now I am testing this issue with this files I found in the Internet.
http://www.cs.odu.edu/~cs778/jmfexamples/AVTransmit2.java
http://www.cs.odu.edu/~cs778/jmfexamples/AVReceive2.java
Am I doing some thing wrong, or am I missing some thing, or will this work fine on the inter net.
I have seen some software�s using java (I think they used java) that do what I want but can�t find out how they did it
When it comes to Internet stuff I am not good. So if any one can give me a working code file it would be a big help
Thank a lot.
If they�re any one that knows how to do this and have a yahoo chat id
[email protected]

Web conferencing appliance � No monthly fees, you own it, you control it. http://rhubcom.com delivers advanced Web conferencing software for PC and Mac in a secured appliance. Universal attendance technology with NO DOWNLOAD of any kind ensures everyone can join meetings in seconds. All you need for collaboration, seminars, training, remote support and marketing is in this box.
Edited by: lawson_joe on Dec 16, 2007 10:59 PM

Video conferencing deployment

Hello,
I work in a hotel, and we intend to deploy video conferencing service to guests and management. Can anyone please help with products, design etc(new to video conferncing). Our internet connection is thru VSAT. Please advice
Thank you
Daniel.

Hello,
Video conferenceing requires large amounts of bandwidth and is even worse than VOIP in reguards to jitter and quality. You have a couple of options depending on what your wanting to do for conferencing.
Polycomm and Tandbergs are two major manufactures of video equipment. I'm not familiar with the tandbergs other than there more ruggged.
If you looking at only doing two sites the equipment is fairly easy but if your looking at haveing anything more than three sites conferencing at the same time you'll have have to look into bringing equipment that consolidates all the streams and sends out one to each of the conferencing units.
Polycomm VSX7000 have the ability setup a conferene to two other video units.
If your looking at doing conferences of ISDN you'll have to look into getting a gateway if just ip it's fairly straighforward.
Its probably best to contact a video engineer group like the chariot group.
http://www.chariotgroup.com/
HTH a little bit.
Patrick
Please rate any posts that are helpful.

Does Video Conferencing use multicast?

We want to enable vide conferencing between multiple remote sites, however, our providers backbone does not support multicast traffic.
The question I have is if I have 2 users in Boston, 2 in NYC and 2 in SF for video conferencing, is the traffic output from a MCU a multicast or unicast to the remote sites?
This is with the MCU at the NYC location.

H.323 uses unicast traffic. Some vtc endpoints are also capavle of generation a mutlicats video stream, but that is not a part of the H.323 feature set. Multicast is not supported on the public internet, and very few if any providers are going to allow it on their backbone.

Starting Video conferencing

Dear all,
can anyone please give me an idea how to implement video conferencing .. dont have any idea how to do it ... we have CUCM 6.1.3, that can be used ot not .. with 3825 router. WAN options are Internet (ADSL) or ISDN
Please advise

Thanks joemar,
The the nice & quick reply.. Can you please guide mi on these things...
1. What if my participants limit is only 3
2. and secondly how this integrated with CUCM 6.1.3 means whats is unified then...
3. Can you please tell me how we can start in this ... what type of connects needed and this devices will sit where... connectivity ...
4. Can we use both internet and ISDN for Video Conf
Please help ASAP...
Mercy
Jatin

New video Conferencing project

Hi, thanks to all in advance, I hope you can help, this the situation: My company just purchased a list of devices which include:
IPVC-3515-MCU12
CISCO2851
IPVC-3527-GW1P
Now, I have no experience with Video Services deployment, where do I start? what are the requirements if this needs to go over the internet to another site, what is involved in this? multicast, QoS, etc? and where can I get some white papers to begin with, thanks again.

You need a very good bandwidth. It should not be less than 512 kbps. You have to enable the QoS and codecs.
Implementing QoS Solutions for H.323 Video Conferencing over IP:
http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080094968.shtml
Take a look at the following link for basic gatekeeper concepts and configuration.
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00800a8928.shtml
http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00800a9a56.shtml

One-way video conferencing?

Hi I was wondering whether there is a way that I can skype/video conference and see the other user's video?

Can you do two-way video conferencing?
good question! I could before I changed internet provider. My only contact has not recieved his new isight camera. I will know in a few days.

Video conferencing in training and event management.

Hello experts,
My client wants to configure the video conferencing facility in the training and event management module. Can somebody advice me on that part as in how to do so?
Thanks and Regards,
Kanika Talwar.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

How do I download adobe captivate videos from the internet?

Hello,
I'm trying to figure out how to download a video from the internet that was made with adobe captivate 2.
I've tried using videolan and some other downloaders but they don't seem to be working.
I may be going about it wrong, does anyone have suggestions?
I'd like to have them downloaded and saved to my computer so I don't have to access the internet.
Thank you!

Thank you for your help, your suggestion worked for the video! But, I found it doesn't work with all the videos on the site.
For example, the download icon will not light for this video here: http://www.volume11.com/ddsgn150/weblessons/weekone/WeekOne_1b.htm
Thanks!

I can't play certain videos from the internet on my macbook

I can't play certain videos from the internet on my macbook.
When using Sarfari or Google Chome, I am unable to play some videos on the internet. News clips, posted videos on blogs, and tv episodes from their own network websites. Youtube videos are fine. I doesn't make sense.
I tried downloading an update for quicktime, but the computer claims that quicktime is up to date. Yet, the videos and tv episodes don't play.
I have checked for the most recent software updates, and everything is up to date. Nothing is wrong with the hardware either.
Any suggestions would be awesome! Thank you!

In addition to Flash, you might need some other plugins. Microsoft videos are mostly in Silverlight, and you'll want Flip4Mac to play WMVs. Perian contains codecs for pretty much every video online.
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
http://windows.microsoft.com/en-US/windows/products/windows-media-player/wmcompo nents
http://perian.org/

Can't see video on the internet?

What software am I missing that I can't view video on the internet? I've tried downloading windows media player, and now I don't see anything, nor while on the internet do I get a message as to what is needed. Please help this non-tech person!
thanks

First welcome to the discussions.
There are 4 Players that are used by developers depending on the Media they choose to include on there site.
(Realplayer)(Quicktime)(Macromedia)(Windows Media Player).
You may also need to check to see if you have the latest JAVA Update. Go to your Apple and then click on Software Update. Please be sure to read through this link before you do anything.
http://discussions.apple.com/thread.jspa?messageID=607640&#607640
Good Luck Don

Video Conferencing in internet

Similar Messages

Maybe you are looking for