Video pixelation after export?

I edited a project for my mulitmedia class in imove, the video looked fine when viewing it in imovie but once I exported it as a quicktime, the video has pixalation in several places, but I don't see that in the imovie version, how can I fix this or edit this

What are your export settings?
And what version of iMovie you're using (answers differ)?

Similar Messages

  • I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

    So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

    What settings are you using to export the video with?  I think 29.97fps is the only one that works with LR 5:
    http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
    http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

  • Help Needed : Video Glitch after exporting from Premiere Pro CC

    Hi all ,
                I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
                 However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
    Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
                 Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
    Regards,
    Elias Lo

    what i did was install final cut pro. I dont have an answer for this but it finish my problem  , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about  , and i also have your problem big time o pn every export.
      i have instal final cut onmy older slower imac and i can see everything and the export are perfect
    so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files  frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

  • Final video pixelated after compression

    Hello,
    I am sort of new to this but seemed to have found a system that works, but for some reason my latest video is pixelated after compression for vimeo.
    I am following the exact same steps as I do for all of my videos and I have never had a problem.
    I have shot it on a Canon 5D mark III / 1920X180 / 25FPS
    I convert it to apple pro res 422 for progressive material
    I drag it into final cut
    I export it as quicktime file
    I then drag into compressor and  use the vimeo recommended settings that I use on all of my videos
    final video is very pixelated
    I will attach the process in screen shots below and hopefully someone can point out where I am going wrong.
    Thank you!

    It is kind of hard to tell what is going on from your screen shots, but a couple of things:
    It's been a while since I used that version of Compressor, but you are resizing (correctly) the 1080 source to 720, and I believe there are settings for "Best" available to make the resize as high quality as possible.
    The 5 Mbits data rate seems low to me. The Vimeo guidelines specify a rate between 5 and 10 Mbits for 720p, I'd set it to average at 8 and peak at 10. The scene with the ocean is a really tough scene to compress, because there is so much motion, throughout the frame, that it might be lowing the quality there to keep to the 5Mbits target.
    Compression works by finding areas of the image where there is little or no difference from frame to frame - so a locked off shot of a person giving a speech at a lectern is much easier to compress than a scene with an ocean where there is  movement and change on a frame by frame basis.
    MtD

  • Video Slips After Export

    I have some video footage from a Mini DV JVC tape that I brought into a ProRes, 23;98 timeline. I captured the tape and converted it to 23;98 using MPEG Streamclip. After editing, I export but everything captured from the tape goes off sync after exporting. But in the timeline everything is fine. I cannot get around to figure this out. Please Help.

    I think the issue may be in not having a codec. It's H.264 encoding. The video camera was set on TV Super Fine (low compression), 720x480, 16:9. We imported the files into Premiere Pro CS3 and it choked on the video. Green screen. Could it be the processor is too slow? or Video? It's an IBM T60 notebook. Also doesn't work on a new HP notebook running an AMD Athlon 64 Turion X2 TK-70 2 GHz Processor. 55MB file size.
    I don't think the file is corrupt. Unedited version plays fine in QuickTime. I installed the software that came with the camera, MediaShow, and that doesn't help.

  • Lyric video lag after export

    My student made a lyric video in after effects, used keyframes, several layers within several compositions which were then converted into one composition and layered with the song. Once he exported to .mov there were several problems. Music was not heard, video lagged, video duration was cut, and combination of all three problems with each export with various setting changes. Can you please tell us how to export with correct settings to avoid all of these problems in the end .mov?
    Thanks,
    Troubled Teacher, Stressed Teen

    It sounds like a few things are going on:
    I'll assume the term "lag" more accurately means,  "it's playing in fits & starts -- it's not smooth playback".  Here's why:
    FAQ: Why is my output file huge, and why doesn't it play back smoothly in a media player?
    In there, you'll also find a link to make files that play back smoothly.
    Why is there no audio?  Probably because the audio check box wasn't checked in the Output Module in the AE Render Queue.  Here's more:
    FAQ: Why is there no audio (sound) in my output file?
    And the most common reason for a too-short file is an incorrectly-adjusted Work Area in the comp being rendered.  To fix this, open the comp.  Hit the Home key.  Hit the b key to set the beginning of the Work Area.  Hit the End key.  Hit the n key to set the end of the work area.  The Work Area is now the same as the comp's duration.  If the comp is longer than the intended file length, just adjust the end of the work area.

  • Why is my video pixelated when exporting from Premiere Pro?

    Hi,
    I'm a musician wanting to make some basic videos for YouTube. The videos will consist of an intro (logo, title etc) and audio playing over a still image which will last the duration of the song. I've edited the still image for the video within Photoshop (CS5.1). The image is of a woman screaming and is intentionally very dark. When I export this image from Photoshop, the quality is excellent. When I then import this image into Premiere Pro (CS5.5) and export as the finished video, the quality of the image is significantly reduced and is rather pixelated. After spending hours searching online and trying different settings to achieve the result I want, I've had no luck, and I'm now in desperate need of a professional opinion. Is it possible to get the same quality image within the exported video as I get from an exported Photoshop file?
    Things I've tried:http://www.ashmathos.com/Musici
    Photoshop - Exporting image using different file types - .tif , .PNG , .PSD  etc
    Premiere Pro - Exporting video using different formats - .FLV , Quicktime and MPEG4
                        - Changing the Capture format between DV and HDV
                        - Different presets - AVCHD, HDV, DV - PAL/NTSC etc
    Both the image exported from Photoshop and the video are 1080p (square pixels)
    An example of what I've explained can be found here:
    http://www.ashmathos.com/Musician/Test
    (The video can be found below the image)
    To any responders,
    Thank you!

    Can't you see how the video is pixelated? Mainly around the nose and forehead?
    Nope.  Looks fine when I watch it.

  • Blocks of square pixels after export

    I keep getting pixelated multi-colored squares that last about 5 seconds
    all throughout my timeline when i play my timeline.
    my goal is to make a DVD of this movie on iDVD,
    but I also get the squares after encoding and export.
    I've tried many different settings and still no improvement.
    But this problem is on the timeline, before encoding and export, and I'm not sure why.
    Incidentally, this project was originally edited on an Avid Xpress DV.
    I transfered the project to an Avid Media Composer, and maybe that's
    the problem???
    can someone help me get rid of these square pixels so I can
    burn it on iDVD, or even DVD Studio Pro?
    thanks in advance.
    Message was edited by: teresita

    Computers use square pixels, TVs use rectangular pixels. Thus, a 720x540 square pixel document viewed in, say, Photoshop should be made 720x486 with a D1 pixel aspect if you want it for television. You would need to make sure your document is the correct way if you were putting it in an FCP timeline or something, otherwise it would look squished/stretched depending on waht you did. But for DVDSP, you should create elements in a 720X540 square pixel document. This is also recommended in the manual in the section that pertains to your question. DVDSP will make the necessary corrections for a DVD burned for TV. Since most DVDs are made to go on TV, viewing in 720x486 (rect) would be the most accurate way to view, which is probably why simulator does that so you can see what it will look like on a TV monitor.
    I recommend working in the correct size and pixel aspect ratio anyway just to avoid problems down the line. For example, in After Effects you would work with 720x486 video in one precomp and all your generated text and graphics should be in a 720x540 precomp. Then bring the sq pix comp to the rect one (if planning to use for TV) and fit to comp.

  • Footage Comes Out Pixelated After Export

    Help!. When I exported my project it comes from the clear HD preview in FCP to a blury pixelated video. I have tried exporting it in differant formats such as h.264 and apple prores 422. Does anyone known how to fix this. If you need an additional infomation dont be afraid to ask, any help is appreciated.
    Regards
    Steves Assistand

    Check the drop down window at top right end of viewer and make sure optimized/original is checked. Seems like you may be exporting proxie.

  • Keep video metadata after exporting MOV files

    Hello !
    I use LR5 to manage RAW/JPG/MOV files from events where I have taken pictures from. Most of the MOV files do either come from my Canon Camera or from my iPhone.
    I regular export the files in a reduced file back to my iPad or iPhone for "public" viewing. Unfortunately LR5 is loosing all metadata from my videos, especially creating date/time and GPS tags.
    Is there any way to include metadata in exported (and compressed) video files ? It works in photo's very well.
    If not, do you know any other program which can compress original video files from my iPhone and keep the metadata ?
    Thanks

    Cragen,
    A very Good Day!
    Lightroom does not read metadata from the video files till the version 5.3.
    However, the functionality may came as a feature in the coming version of  Lightroom!
    If the same is not visible in Lightroom make sure the files are copied to the system and then check the same in Lightroom
    Source: http://helpx.adobe.com/lightroom/kb/metadata-doesnt-import-video-files.html
    Let me know how it works.
    Cheers!
    Mandhir

  • Video "shaking" after export

    The clip I am working with is scaled to about 350. The video looks fine when played in the canvas, but when it is exported it moves up and down repeatedly. I have tried different speeds, as well as different file types and get the same result.
    Please see the link for an example of what I am experiencing. It is a 3.5MB .mov
    http://www.megaupload.com/?d=H6VWZV7B
    Thanks you,
    Branden
    2.16 GHz iMac Core 2 Duo   Mac OS X (10.4.7)  

    Here is a new link.
    http://www.filesend.net/download.php?f=52abc37b719e336b05320ff42b894756
    I do not have an NTSC monitor available. And the extreme close up is the look I am going for.
    1.5Ghz Mac Mini   Mac OS X (10.4.6)  

  • Video flickering after export

    Hey Guys,
    I've been using Adobe Premiere Pro ever since CS4 came out and this is the first time that I've came across this particular issue. Up until last week I was still using CS6 on my 2011 Macbook Pro. Three days ago I went and purchased a brand new 2014 15 inch Macbook Pro and downloaded the Premiere Pro CC Trial on it. I was loving everything about CC until I exported my first project. Half of the clips were flickering so I matched each flickering clip to the timeline and noticed that the only clips that were flickering were the clips that I had nested.
    This is what I'm experiencing :
    https://www.youtube.com/watch?v=vzfOA2WJFXU&feature=youtu.be
    I've tried exporting in different formats, but I really want to export in .h264
    This may sound stupid, but is it because it's the trial version?
    Any help will be greatly appreciated! Thank you!

    I talked with customer support. They suggested that the bug is a result of how I encoded the video in VirtualDub. I used Xvid MPEG-4 codec, and the representative suggested I use a format that is generally more compatible such as H.264 or QuickTime Animation (RLE).
    I redid the the conversion with VirtualDub, this time using x264. Unfortunately, this simply introduced new issues when I tried to edit the video.
    Interestingly enough, the issue shows up in the preview this time.
    I don't know why there are still issues. I would try QuickTime Animation, but I don't know of any free software that would let me perform a conversion. Does anyone know why this happens? If not, does anyone know what software I could try to transcode the video?

  • Video "Bouncy" After Export

    Aloha and Thank you to all in advance for help with this matter.
    On export from PPro, the final video seems to bounce when played back. Here is an example I've posted on youtube:
    http://www.youtube.com/watch?feature=player_profilepage&v=WXITvy2ZZvk
    Do know the completed video does this also when played back in quicktime so this isn't a youtube processing matter.
    Is there a setting I'm overlooking in the export.
    Mahalo nui loa for any assistance.

    Thank you for the help and reference. The following paragraph (referenced from the thread of Stephen's direction) fixed my problem.
    "I submitted this to Adobe tech support, referencing this forum posting.  It took a couple of weeks of back and forth explaining that I'd already tried all their suggestions, thanks to the various people who've tried to help on the forums.  Finally, today, someone from Adobe called, and we got it to work.
    It boiled down to setting the "Field Options" to "Always deinterlace" and "Reverse Field Dominance", and then rendering the video.  I am sure that I tried the Field Options settings, but I guess I failed to render the video and just played the sequence with no effect.
    Thanks to those who helped on this forum, and thanks to the support engineer at Adobe who helped today.
    [Edit a few minutes later...] Playing around with it a bit more, it looks like "Reverse Field Dominance" is the key.  I can leave the processing options at "None", and the video renders correctly."
    Mahalo Nui Loa

  • AME CS4 darkens h.264 video files after export

    Finding something really weird happening.  Whenever I am exporting a file through AME into a quicktime movie file, h.264, the final product is darkened, almost like there is a grey filter in front of it.  I can't find any setting that might be doing this, and can't seem to figure out what's going on.
    Help?  Please?

    QuickTime has a 'bug' with gamma.  Best to avoid it entirely and just use the normal MP4 container.

  • Poor Video Quality After Export

    I used Brightness & Contrast as well as Three-Way Color Corrector to edit. When I export, I lose almost all of the color quality. I have tried QuickTime, H.624, and a number of different Codecs and it always comes out the same. I have pushed the bit rate all the way up as well. I'm not sure what else to do

    To better understand, when you saw poor quality, that is compared to what? The original clip?
    Are you viewing both on the same monitor? If you remove the effects, does the quality look better?

Maybe you are looking for