Video sequence disappears from motion when I change the Timing, Time Remap.

Hi,
I have a motion project opened through FCP, with two video sequences. As soon as I try to change the timing, in order to slow part of the video down, that video sequence just vanishes.
It's still in the layers, but it's not in the timeline anymore.
Thanks,
KEn

Do your re-timing in Motion, it will give you far better results. Cut or transition the original with the retimed part in FCP.
that video sequence just vanishes.
It's still in the layers, but it's not in the timeline anymore.
So the whole Sequence vanishes or just the .motn file???

Similar Messages

  • Why are animations disappearing when I change the time of the master slide?

    I apologize if this is a stupid question, but I have Adobe Captivate 6, have had Captivate since it was Macromedia Captivate, and I am just stuck.  I imported a .pptx file that a colleague created, and on several pages she has animations.  I went through the .pptx and it looks and works fine. 
    When I import it into Captivate, the animations work fine, but I'm not able to advance each slide until a couple of seconds after it appears.  That won't fly with some of the people at my organization who prefer the clickclickclickclick method of reviewing something.  When I change the timing of the slide or the clickbox or the master slide, the animations sort of get skipped over.
    Can someone please help me?

    Sure, here you go.

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    - Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
    Next:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Why are my apps changing when i change the orientation from landscape to portrait

    Recently, on my ipad mini retina, when i change the orientation from landscape to portrait, the apps change. For example, when i enter a game like impossible and change to landscape to play it and then exit the screen has shifted to either the right or left and shows the first line of the next pages apps. Its kind of like when im in the middle of changing from one page to another but it only changes back to normal when i tough the screen. Im not sure if this has anything to do with the new 7.1 ios but it is becoming really annoying

    I know it is not a specific app problem because it happens when i come out of some of my apps, it doesnt happen all of the time, only sometimes. Also if any of you could help me with another issue with the same device, when i connect to wifi/hotspot i get static on the screen, it is very noticable when i show a dark picture or a large amount of the screen is a dark colour but i wanted to know if this was normal with the ipad mini retina. I have seen discussions about this device having problems connecting to wifi but i havent found any discussions on this. Does anyone know could cause this?

  • After changing batteries and up date my I Mac to 10.8.2, my BLUETOOTH disappear from my computer.  On the top line right corner the symbol says:  NOT AVAILLABLE, and the icon is not anymore int my computer's preference.  Anyone can help me here?

    After changing batteries and up date my I Mac to 10.8.2, my BLUETOOTH disappear from my computer.  On the top line right corner the symbol says:  NOT AVAILLABLE, and the icon is not anymore int my computer's preference.  Anyone can help me here?

    I've done it two or three time and I still have the same problem.  May be I do not do it properly so can you give me the right procedure.

  • How i can play smoother HD video files in realtime, when i change the duration in cs6

    How i can play smoother HD video files in realtime, when i change the duration in cs6.

    More information needed for someone to help... please click below and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840

  • Lync 2013 : two problems 1) quicked off from meeting when presenter change 2) Freeze when leaving first call of day

    Hello,
    I have two problems with Microsoft Lync 2013 (see level in screenshot). The first one appeared after May Windows updates and is so annoying that I decided myself to open a post in this forum, with the second one. The first problem is the most important for
    me (see why when reading) and the second one is the cherry on the cake if solved, but is minor.
    1) I'm kicked off from meetings when presenters change
    In an online meeting, when presenters change, I'm kick off since last May updates (very clear since it didn't happen before). I'm unable to specify if it occurs when I'm presenter or just attendee, but that could influence. I will try to report if/when I
    notice a difference.
    THIS IS REALLY IMPORTANT, Please help me solve this !
    2) Lync freezes for approx. 30' to 1min. when leaving first call of day
    I reboot my PC every day. I always notice that after leaving voice call from my first meeting of the day, Lync freezes (doesn't respond message) for 30' to 1min. This is when I leave audio, not meeting window. This never occurs again in the course of the
    day. Windows goes into hourglass, then it works again.
    Does anyone know about this ? Any action to help diagnose or solve this ?
    Again this is less important than first problem
    Thanks for help
    -Pierre

    The steps to remove the update:
    Open Control Panel, click Programs, and then, under Programs and Features, clicking View installed updates.
    Click the update that you want to remove, and then click Uninstall.
    For Lync 2013 May 2014 update, it is KB2880980.
    You can check the following website about the drivers:
    http://www.driverscape.com/download/plantronics-c320-m
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Lisa Zheng
    TechNet Community Support

  • Videos / movies disappeared from computer?

    All the films I have bought disappeared from my computer/itunes, even the digital copies bought. How can I get them back?

    Hi there,
    If you purchased the content from the iTunes Store, you can redownload it by following the article below.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    -Griff W.

  • When I change the color using windows 7 color, I get a prompt to change back to firefox default or everything is very slow. Isn't there another way to fix the i

    When I change the color using windows 7, apparently firefox runs slower. The videos I watch are spotty and looking like it's in slow motion. Sometimes I get a prompt to use firefox colors and this fixes it. But why can't I use other colors, and are there settings to help me fix this problem? Thank you for any information you can give me. Joyce

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    You can check for problems caused by recent Flash updates and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Why is it that when I change the contacts on my phone, it changes them on my mom and dad's as well?

    My family and I recently got iPhones for Christmas. One for my dad, one for my mom, and one for me.  We also have an iPad 2.  They are all hooked up to iCloud via one username.  When we got the phones, we had trouble transferring our contacts from our old verizon phones to our new apple ones but we eventually got the contacts we needed.  At first, my mom's phone was not connected to the iCloud account shared by the rest of us and the iPad.  She wanted the calendar from the iPad so I deleted the account on her phone and added the iCloud account that the iPad was using.  All was fine until my dad and I realized that our contacts were wiped from our phones and replaced with my mom's.  I then started painstakingly deleted my moms contacts and replacing them on my own on my phone.  However, contacts were being deleted from my mom and dad's phone at the same time.  It's almost like the three phones are constantly synching with each other.  It would be ideal if we could get all of our contacts back the way they were before my mom changed her account but we would settle for this constant synching to stop. Please give us some direction here, we are new to this. Thanks in advance!

    Why is it that when I change the contacts on my phone, it changes them on my mom and dad's as well?
    Because, as you said "They are all hooked up to iCloud via one username. ". That is exactly what iCloud does.
    You need independent iCloud accounts for each person to maintain independent contact lists.

  • TV goes black when i change the channel?

    On my Toshiba LCD TV quite frequently (at least once a night) the screen will go black when I change the channel (via cable box) or if I change the input. I then have to turn the TV off then back on to get the picture back.

    I have the same problem and it is frustrating. I called the cable company who told me to unplug everything from the wall for 1 minute and the plugit back in. "Duh" Unfortunately I had to do this every few hours. I called them back an they performed a reset from their end. It has worked fine ever since.
    Mark
    "Faith is the ability to see the invisible, believe in the incredible, and achieve the impossible".
    Medical Billing And Coding Jobs

  • The icon when i change the volume up or down is no longer the beats logo, it is a simple megaphone.

    1. HP Pavilion m6 Notebook PC
    2. Windows 7 64 bit
    3. none
    4. I accidentally deleted IDT Audio, i was trying to get rid of programs that i didnt need, i didnt know this controlled beats.
    i noticed that my Beats Audio Control Panel was gone and i searched online and found out i needed to re-download IDT, so i did. Beats Audio Control Panel is now back but when i change the volume up, down, or off, it shows an ugly little megaphone icon and ugly little white bars, instead of the shiny silver beats logo and the silver bars.  I hate the new logo with the mega phone how can i get the beats logo back?
    i tried a system restore from before i uninstalled IDT but it still has the same problem.
    Please reply with any ideas

    Hi,
    Try reinstalling the HP OSD Utility on the following link.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
    After this has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I am trying to organize thousands of images in aperture.  The dates on the old scanned images is all 2008, when I started importing them.  When I change the date in aperture some of them hold the modified date and some revert to 2008.  Any ideas?

    I am trying to organize thousands of old images in aperture.  Aperture dates them all in 2008, when I started this project.  When I change the date in aperture some of them hold the modified date and some revert to 2008.  Any ideas?

      I just tried a test library, re-imported fresh images from a hard drive, and the date changes still revert.
    So neither your external drive nor your Aperture library are to blame.
    What do you mean test in a different user acct?  Would it be a good idea to uninstall and re-download aperture 3?
    Appreciate all your help.
    I meant the trouble shooting procedure described here:  Isolating an issue by using another user account
    To test, if some settings in your user account are faulty or preferences files corrupted, it helps to create a new user account from the "Users&Groups" System preferences. With a brand new user account you can see, if something in your current account is causing this.
    Should you see, that Aperture is not even working from a new and clean account, I'd reinstall Aperture, and if need be the Operating system.  Are you using any plug-ins?

  • Enhanced Video podcast with chapters..can we change the color of the text?

    Enhanced Video podcast with chapters..can we change the color of the text? Yo know when yo make a marker and then name it and put in the url name an then the url. Well it looks great on GB but when it is exported it is always blue and you cant see it very well. Am I a silly boy or is there some way we can change that color?
    http://www.galacticmac.com
    20" 2GHz Intel Core Duo   Mac OS X (10.4.10)  

    Hi there
    Sorry, but your post seemed to initially infer you were just referring to a Button you would insert on a page. At least that's what I understood when I posted with what I did.
    Now it would seem you are referring to the Playback Controls that Captivate supplies? So either I grossly misunderstood your initial issue or you are now switching gears and asking about something different.
    What I posted earlier does not apply to the Captivate Playback Controls.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for