Videowall, data wall, multi display controller

Hi all just wanted to review this item as i have a question.. I purchased the iVw4 Standalone Videowall controller from www.iiview.com i have manage to output my adobe graphical work on four screens each at 19" as this unit can display in various modes clone mode, full mode or vertical replication.. it is awsome to see your work on such a big screen though planning to put 4x 42" screens together... what i wanted to know is there any way of overlaying a video footage of adobe premiere work independently over the existing application. any help would be appreciated.

I understand that you need the driver for your system.
The drivers are available under graphics in this document.
However, if the driver on the site is not working for you, I recommend posting in the business support forums found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Advanced Data Grid - Multi-Select

Good Day,
I am using an Advanced Data Grid to display data to the user. The user needs to be able to select multiple rows, and not necessarily in order. This is all fine, however, they don't want to have to hold the CTRL or SHIFT keys when selecting, and would like the mouse to act as a select/deselect for the row.
I know that I will have to extend the ADG class to handle this, but I was hoping that someone else may have done this, or has some guidance. I have never extended a class before, so I am not sure what all steps i will need to take.
Thanks!
Rob

sortExpertMode property
public var sortExpertMode:Boolean
By default, the sortExpertMode property is set to false,
which means you click in the header area of a column to sort the
rows of the AdvancedDataGrid control by that column. You then click
in the multiple column sort area of the header to sort by
additional columns. If you set the sortExpertMode property to true,
you use the Control key to select every column after the first
column to perform sort.
The default value is false.
So, this property simply changes HOW you do multi-column
sorting.
I submitted an enhancement request:
http://bugs.adobe.com/jira/browse/FLEXDMV-1429

Numeric data is not displayed in BI Publisher 11g report

Hi,
I'm using Oracle BI 11g (11.1.1.6.0).
I'm experiencing a serious issue with numeric data in reports created with Publisher.
When I define the query in the data model, numeric data gets declared as "integer" (even if it should be "double"). Anyway, when creating the layout all data is correctly shown.
The issue emerges when I run the report in interactive mode: numeric data is not displayed at all.
If I run it in HTML mode or other, I get proper results.
I tried to explicitly CAST numeric data in the query to number(21, 6) but I get no different result.
Any help or suggestion is warmly welcome.
Thanks,
Cristina

Yes, assuming that you are using the Standalone version, following are some excerpt from user guide.
10g see Oracle® Business Intelligence Publisher
Report Designer's Guide
Release 10.1.3.4
Part No. E12187-01
Chapter 6 Building a Data Template
Supported Column Types
CLOB (conditionally supported)
The CLOB must contain text or XML. Data cannot be escaped inside the CLOB column.
And for 11g see
Oracle® Fusion Middleware
Data Modeling Guide for Oracle Business Intelligence Publisher
Release 11g (11.1.1)
Part No. E18862-01
Chapter 3 Creating Data Sets
Using Data Stored as a Character Large Object (CLOB) in a Data Model
BI Publisher supports using data stored as a character large object (CLOB) data type in
your data models. This feature enables you to use XML data generated by a separate
process and stored in your database as input to a BI Publisher data model.
Use the Query Builder to retrieve the column in your SQL query, then use the data
model editor to specify how you want the data structured. When the data model is
executed, the data engine can structure the data either as:
• a plain character set within an XML tag name that can be displayed in a report (for
example, an Item Description)
• structured XML
Cheers,
ND

Date not being displayed in the custom format

Hi ,
I have a problem wherein i am unable to change the format of the date.
I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
I have binded date from the context, used the Current Date field provided by SAP. Nothing works.
Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
Please suggest as to what the issue could be.
Thanks,
Soumya.

Hi All,
Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
data: v_int_date like sy-datum,
v_ext_date(10).
v_int_date = '20110201'
write v_int_date to v_ext_date MM/DD/YYYY.
Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
Is there any solution for this? How can I 'override' defaults in the SAP User Master?
Thanks,
Mahesh

Navigational Attribute data is not display in Cube level and reporting

Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balaji

Hi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji

2 ranges of sales order date to be displayed under one coloum.

Hi ALL,
I need the o/p of the two select-options to be displayed in a single column??
EX :    sodat1    1.10.2006        TO         20.10.2007
              sodat2    1.12.2008        TO         20.10.2009
I need these dates to be displayed in a single coloumn under SO.
         SO (SALES ORDER)
      1.10.2006
     2.10.2006
     3.10.2006     .
     20.10.2007             AND continuously next range of sodat2 LIKE
      1.12.2008
       2.12.2008
      3.12.2008   .
    19.12.2009
    20.10.2009
Suggest me some steps to do or any sample codeing.
Thanks&Regards,
R.Vinoth.

Hi Vinoth,
Use the below code.
SELECT-OPTIONS: s_num FOR sy-datum,
                s_num1 FOR sy-datum.
DATA: BEGIN OF itab OCCURS 0,
       num type sy-datum,
      END OF itab.
*For select option 1.
IF NOT s_num-low IS INITIAL AND
NOT s_num-high IS INITIAL.
WHILE s_num-low LE s_num-high.
    itab-num = s_num-low.
    APPEND itab.
    s_num-low = s_num-low + 1.
ENDWHILE.
ELSEIF NOT s_num-low IS INITIAL.
LOOP AT s_num.
    itab-num = s_num-low.
    APPEND itab.
ENDLOOP.
ENDIF.
*For select option 2.
IF NOT s_num1-low IS INITIAL AND
NOT s_num1-high IS INITIAL.
WHILE s_num1-low LE s_num1-high.
    itab-num = s_num1-low.
    APPEND itab.
    s_num1-low = s_num1-low + 1.
ENDWHILE.
ELSEIF NOT s_num1-low IS INITIAL.
LOOP AT s_num1.
    itab-num = s_num1-low.
    APPEND itab.
ENDLOOP.
ENDIF.
LOOP AT itab.
WRITE:/5 itab-num.
ENDLOOP.

No data was been displayed in Windows Performance Analyzer

When I use the Windows Performance Analyzer to analysis the data，but the performance data is not displayed in the WPA. Who can support me to solve the question.
Detail:
1. Create the *.etl file
(1)do the command: xperf -on SysProf -stackwalk profile
(2) execute the performance software
(3) do the command to create the *.etl file : xperf -d f:\aLog.etl
2. Analysis the *etl file
(1)Use the WPA to open the *.etl created by the step(3), click Load Symbos below Trace Menu
(2)Drop Computation to the Analysis window
(3)Select Utilization by Process,Stack，no data is been displayed below Series，and I try all the selection ，no data is been displayed. But put the mouse on the cell, there is some information about *.exe file on it
Remark：The other method to create the *.etl file : Use Windows Performance Recorder to create *.etl file，then execute the Step2 to analysis the *.etl，the result is that no data is been displayed
Test enviroment:
OS：Windows7 Professional SP1
Explorer：IE 8.0
Captured image:

When I use the Windows Performance Analyzer to analysis the data，but the performance data is not displayed in the WPA. Who can support me to solve the question.
Detail:
1. Create the *.etl file
(1)do the command: xperf -on SysProf -stackwalk profile
(2) execute the performance software
(3) do the command to create the *.etl file : xperf -d f:\aLog.etl
2. Analysis the *etl file
(1)Use the WPA to open the *.etl created by the step(3), click Load Symbos below Trace Menu
(2)Drop Computation to the Analysis window
(3)Select Utilization by Process,Stack，no data is been displayed below Series，and I try all the selection ，no data is been displayed. But put the mouse on the cell, there is some information about *.exe file on it
Remark：The other method to create the *.etl file : Use Windows Performance Recorder to create *.etl file，then execute the Step2 to analysis the *.etl，the result is that no data is been displayed
Test enviroment:
OS：Windows7 Professional SP1
Explorer：IE 8.0
Captured image:

Maintenance view problem "No data maintenance Authorization; Display only"

Maintenance view problem
Question 1>>>>
> I have created a table with Display/maintenance allowed and technical setting Data class - APPL0 (master data, transparent tables).
>> Then I have created a maintenance view thought utilities->table maintenance generator where i have specified the Authorization group as &NC& (w/o auth. group)
->and also created a function group and specified in the maintenance screen-> I have selected maintenance type as one step-> i have given the overview screen number->and in Recording routine i have selected - no, or user ,recording routine.
>>> Now when i go to transaction SM30 and put the table name and press on maintain button I get a information box saying "No data maintenance Authorization; Display only".... and it only displays the data.
my problem is I want to enter data through maintenance view (SM30).
2nd Question >>>> once i create a function group for maintenance view how can i assign a transaction for this. (as if i do it as we do for a module pool program it gives me error)Thank you.
kailash

SE93. Enter a transaction name. Create. In the pop up enter a title and select 'Transaction with parameters'.
Next screen fill the following;
Transaction 'SM30'
Check 'Skip first screen'
In the table control at the bottom of the screen
Name of screen field 'VIEWNAME'
Value <your table name>
Name of screen field 'SHOW'
Value 'X'
Save.
Job done.

Error message: when downloading data from 2nd display tag table

I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. When i am trying to download data from 2nd and 3rd display tag table i am getting following error:
Exception: [.TableTag] Unable to reset response before returning exported data. You are not using an export filter. Be sure that no other jsp tags are used before display:table or refer to the displaytag documentation on how to configure the export filter (requires j2ee 1.3).
     at org.displaytag.tags.TableTag.writeExport(TableTag.java:1438)
     at org.displaytag.tags.TableTag.doExport(TableTag.java:1364)
     at org.displaytag.tags.TableTag.doEndTag(TableTag.java:1215)
     at org.apache.jsp.InstalBase_005fReport_jsp._jspService(InstalBase_005fReport_jsp.java:974)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:595)
As per the Exception i don't have any jsp tag before the display tag.
Please help me if any body has any solution for the above exception.
Thanks in advance.
Smruti..

See also http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Custom field in Account Master Data Tcode BCA_CN_ACCT_03 - Display Account

Hi all,
I want to add a custom field in Basic Data tab of display account screen : Tcode BCA_CN_ACCT_03.
Please give step-by-step solution.
Points assured!
Jogdand M B
Edited by: Jogdand M B on May 19, 2008 5:36 PM

Solved by myself
I write here the response because I didn't found it anywhere:
When you are adding a custom field to MAKT table you have to add it to appending structres SKTEXT and DMAKT too because the standard uses them to read/write the data to MAKT. It's easy to do but hard to find out

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

Baseline date should in display mode

Hi all,
Our client wants baseline date should be display mode only. Now users are changing the proposed baseline date so client wants this should be not changeable.
Please help.
regards,
Azeem

Go to SPRO --> Financial Accounting --> Financial Accounting (New) --> Document --> Rules for changing document --> Document Changes Rules, line item.
In that go to field name BSEG-ZFBDT for account type D (customers), K (Vendors), etc as required. Double click on that field name and remove the tick "Field can be changed"
This will solve your problem.

I have only a single texbox.i want to display names , date,priortiy in the same textbox when i typed @ names should be display names like when u type comment in facebook for particular person it will display name. when i type ! date should be display and

i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
names !today date or tomorrow date etc * priority high,low ,medium etc</big>

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

Data doesn't display in IE but does in Firefox, Safari, etc.

I have an XML data set that displays as expected in Firefox,
Safari, etc. However, the data will NOT display in IE on a PC or a
Mac. It would be a great thing if it worked in IE!
Thanks for any ideas.
Link:
http://email.colorfulimages.com/email%5Farchive/archive/email/

Hi Steve,
It is mentioned in both the API doc and the Data Set/Region
Overview:
http://labs.adobe.com/technologies/spry/articles/data_api/apis/region.html#spryregion
http://labs.adobe.com/technologies/spry/articles/data_set_overview/index.html
--== Kin ==--

Korean data is not displaying in BI system

Hello BI Experts,
Do you have any idea or some settings in BI system as korean data is not displaying in BI ODS, while source system in correct data. Korean data is displaying # value in PSA and ODS.
Thanks,
Sapna

hi,
as mentioned in earlier post ,you need to have your system unicode enabled,
check in menu -> system->status...in your BW system field called unicode system
Also try running program program RSCPINST - which is used to set the language setting to load the data.
if the chain language setting is not maintianed for loading :
click on Add button ->Key :KO and Language :korean->save it
try to load the data again and check it
hope it helps
regards
laksh

Videowall, data wall, multi display controller

Similar Messages

Maybe you are looking for