View as HTML not available
I am having a strange problem. I had installed mail for Exchange 3.0 on my 5800XM couple of months back. For last couple of days the option of viewing the email in HTML mode is not available under options. The option comes back if I reinstall Mail for Exchange from Ovi store but goes away after any reboot.. The software version that I am using is 3.00(73)
Any suggestions from the gurus.
In TCODE WE60, Goto--> UserSetting...
Enable the checkboxes for documentation & other params... You will get what you needed..
-Siva Maranani
Similar Messages
-
Include "templates/ztomplarf/98/alv_0.html" not available.
With ITSmobile I try to implement an ALV Grid on the dynpro in a Custom Container, and the error in st22 is:
Template "templates/ztomplarf/98/zrfq_alvstock_200.html" contains syntax errors
and therefore could not be compiled.
Cause of error:Include "templates/ztomplarf/98/alv_0.html" not available.
The syntax error is in row: 112, column: 103
The incorrect HTMLB line is:
" `include(~service="ztomplarf", ~theme="98", ~name="alv_grid.html");"
Thanks and regards.Hello Javier,
You probably need to regenerate your service, please see SAP help:
http://help.sap.com/saphelp_nw70/helpdata/en/46/668d4b72255de4e10000000a1553f6/frameset.htm
for details.
You could also test with ~generatedynpro 1 to see if the ALV grid is even there in your service, but you should have a template for it. If your service still does not work then you will need to debug.
Edgar -
Satellite view of map not available Nokia 5800
I have updated to the latest version of Nokia Maps. However, when I switch to satellite view, I do not get the satellite view. I have downloaded India map to my handset.
SreeHi Sreevalsan ..Exactly same problem i am facing...please tell me if you have any solution now...
i have one more problem exist that when i complete download india map everything is Ok and it shows that india map is in your phone but when i disconnect my mobile and reconnect my phone then it always shows to download india map..and also not shows the satelite view even i also download a low size country map which is zimbabwe and it works perfect with satelite view and also shows everytime map on phone when i connect my phone to computer .i am not understanding what to do please help anyone -
Smart View for Essbase Not Available in Planning Rapid Deployment
I have successfully deployed EPM 11.1.2.3 by following the steps in the Planning Rapid Deployment guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I bring up Smart View using a Shared Connections URL of http://<servername>:9000/workspace/SmartViewProviders, I only get connections for Planning and for the Reporting and Analysis Framework. How can a I get a connection for Essbase?
As it turns out, the 11.1.2.3 Planning Rapid Deployment wizard doesn't install Essbase Provider Services, just Planning Provider Services and Reporting and Analysis Provider Services. Until I installed Essbase Provider Services, I wasn't even able to create a private connection to Essbase. I had to run InstallTool.cmd and select "Provider Services Web Application" from the Essbase section of the selection screen. I also had to run the configuration utility and select "Deploy to Application Server" under "Provider Services" in the Essbase section of the selection screen.
After that, I was able to create a private connection to Essbase with this URL: http://<server name>:9000/aps/APS
Although the private connection was now working, the Essbase connection was still not showing up as a shared connection in Excel, when I set the Excel Smart View option for Shared Connections URL to http://<server name>:9000/workspace/SmartViewProviders. I was able to get this working by running the configuration utility again and selecting "Configure Web Server" in the "Hyperion Foundation" section of the selection screen.
I was also able to create an XML file as Celvin suggested, using http://<server name>:9000/aps/APS for the Essbase connection. Thanks for the suggestion!
-Tom -
I just started using Pages and when I try to make an outline from a new blank page I am unable to choose it from the toolbar or the view tab. Please help. Thanks!
drakanamor,
It's possible that you have strayed into the Page Layout section of the Pages templates. Page Layout templates have no Text layer, or frame, in which to show the outline view, so the option is unavaiable.
Choose one of the Word Processing Templates.
Jerry -
Column format HTML not available
Hi
I have configured different user roles in Obiee 11.
As administrator I can change the column format of a text column to html.
My users can't select any of the html options (just "plain text" and "plain text (don't break spaces)".
I gave them the following privileges and restarted the server:
- Save Actions containing embedded HTML
- Save Content with HTML Markup
- Access HtmlViewService Service
What could I be missing?
Thank you
Regards910861 wrote:
What I observed if I grant access to a group to which my user belongs on the item "Save system-wide column Formats" - User can see all the data formats.
But having this option enabled for the users is risky,dangerous and unacceptable.
Hiding this ((Save System-Wide Format)option from the front end ( After saving the system wide changes IF IN CASE REQUIRED) can be a topic of research.
Thanks.+1 -
My Layout View is not available?
I use number 08. Today, the Layout View item is not available. I don't know why and how to retrieve it. Someone can help me?
Welcome to Apple Discussions and the Numbers '08 forum, nlong.
Further to Ashka's comment:
Show Layout is active only when you Show Print view.
If Show Layout is has actually disappeared from the menu (ie. it is not just greyed), Show Print View, then try the keyboard shortcut for Layout:
shift-command-L
Regards,
Barry -
Performance issue in selecting data from a view because of not in condition
Hi experts,
I have a requirement to select data in a view which is not available in a fact with certain join conditions. but the fact table contains 2 crore rows of data. so this view is not working at all. it is running for long time. im pasting query here. please help me to tune it. whole query except prior to not in is executing in 15 minutes. but when i add not in condition it is running for so many hours as the second table has millions of records.
CREATE OR REPLACE FORCE VIEW EDWOWN.MEDW_V_GIEA_SERVICE_LEVEL11
SYS_ENT_ID,
SERVICE_LEVEL_NO,
CUSTOMER_NO,
BILL_TO_LOCATION,
PART_NO,
SRCE_SYS_ID,
BUS_AREA_ID,
CONTRACT,
WAREHOUSE,
ORDER_NO,
LINE_NO,
REL_NO,
REVISED_DUE_DATE,
REVISED_QTY_DUE,
QTY_RESERVED,
QTY_PICKED,
QTY_SHIPPED,
ABBREVIATION,
ACCT_WEEK,
ACCT_MONTH,
ACCT_YEAR,
UPDATED_FLAG,
CREATE_DATE,
RECORD_DATE,
BASE_WAREHOUSE,
EARLIEST_SHIP_DATE,
LATEST_SHIP_DATE,
SERVICE_DATE,
SHIP_PCT,
ALLOC_PCT,
WHSE_PCT,
ABC_CLASS,
LOCATION_ID,
RELEASE_COMP,
WAREHOUSE_DESC,
MAKE_TO_FLAG,
SOURCE_CREATE_DATE,
SOURCE_UPDATE_DATE,
SOURCE_CREATED_BY,
SOURCE_UPDATED_BY,
ENTITY_CODE,
RECORD_ID,
SRC_SYS_ENT_ID,
BSS_HIERARCHY_KEY,
SERVICE_LVL_FLAG
AS
SELECT SL.SYS_ENT_ID,
SL.ENTITY_CODE
|| '-'
|| SL.order_no
|| '-'
|| SL.LINE_NO
|| '-'
|| SL.REL_NO
SERVICE_LEVEL_NO,
SL.CUSTOMER_NO,
SL.BILL_TO_LOCATION,
SL.PART_NO,
SL.SRCE_SYS_ID,
SL.BUS_AREA_ID,
SL.CONTRACT,
SL.WAREHOUSE,
SL.ORDER_NO,
SL.LINE_NO,
SL.REL_NO,
SL.REVISED_DUE_DATE,
SL.REVISED_QTY_DUE,
NULL QTY_RESERVED,
NULL QTY_PICKED,
SL.QTY_SHIPPED,
SL.ABBREVIATION,
NULL ACCT_WEEK,
NULL ACCT_MONTH,
NULL ACCT_YEAR,
NULL UPDATED_FLAG,
SL.CREATE_DATE,
SL.RECORD_DATE,
SL.BASE_WAREHOUSE,
SL.EARLIEST_SHIP_DATE,
SL.LATEST_SHIP_DATE,
SL.SERVICE_DATE,
SL.SHIP_PCT,
0 ALLOC_PCT,
0 WHSE_PCT,
SL.ABC_CLASS,
SL.LOCATION_ID,
NULL RELEASE_COMP,
SL.WAREHOUSE_DESC,
SL.MAKE_TO_FLAG,
SL.source_create_date,
SL.source_update_date,
SL.source_created_by,
SL.source_updated_by,
SL.ENTITY_CODE,
SL.RECORD_ID,
SL.SRC_SYS_ENT_ID,
SL.BSS_HIERARCHY_KEY,
'Y' SERVICE_LVL_FLAG
FROM ( SELECT SL_INT.SYS_ENT_ID,
SL_INT.CUSTOMER_NO,
SL_INT.BILL_TO_LOCATION,
SL_INT.PART_NO,
SL_INT.SRCE_SYS_ID,
SL_INT.BUS_AREA_ID,
SL_INT.CONTRACT,
SL_INT.WAREHOUSE,
SL_INT.ORDER_NO,
SL_INT.LINE_NO,
MAX (SL_INT.REL_NO) REL_NO,
SL_INT.REVISED_DUE_DATE,
SUM (SL_INT.REVISED_QTY_DUE) REVISED_QTY_DUE,
SUM (SL_INT.QTY_SHIPPED) QTY_SHIPPED,
SL_INT.ABBREVIATION,
MAX (SL_INT.CREATE_DATE) CREATE_DATE,
MAX (SL_INT.RECORD_DATE) RECORD_DATE,
SL_INT.BASE_WAREHOUSE,
MAX (SL_INT.LAST_SHIPMENT_DATE) LAST_SHIPMENT_DATE,
MAX (SL_INT.EARLIEST_SHIP_DATE) EARLIEST_SHIP_DATE,
MAX (SL_INT.LATEST_SHIP_DATE) LATEST_SHIP_DATE,
MAX (
CASE
WHEN TRUNC (SL_INT.LAST_SHIPMENT_DATE) <=
TRUNC (SL_INT.LATEST_SHIP_DATE)
THEN
TRUNC (SL_INT.LAST_SHIPMENT_DATE)
ELSE
TRUNC (SL_INT.LATEST_SHIP_DATE)
END)
SERVICE_DATE,
MIN (
CASE
WHEN TRUNC (SL_INT.LAST_SHIPMENT_DATE) >=
TRUNC (SL_INT.EARLIEST_SHIP_DATE)
AND TRUNC (SL_INT.LAST_SHIPMENT_DATE) <=
TRUNC (SL_INT.LATEST_SHIP_DATE)
AND SL_INT.QTY_SHIPPED = SL_INT.REVISED_QTY_DUE
THEN
100
ELSE
0
END)
SHIP_PCT,
SL_INT.ABC_CLASS,
SL_INT.LOCATION_ID,
SL_INT.WAREHOUSE_DESC,
SL_INT.MAKE_TO_FLAG,
MAX (SL_INT.source_create_date) source_create_date,
MAX (SL_INT.source_update_date) source_update_date,
SL_INT.source_created_by,
SL_INT.source_updated_by,
SL_INT.ENTITY_CODE,
SL_INT.RECORD_ID,
SL_INT.SRC_SYS_ENT_ID,
SL_INT.BSS_HIERARCHY_KEY
FROM (SELECT SL_UNADJ.*,
DECODE (
TRIM (TIMA.DAY_DESC),
'saturday', SL_UNADJ.REVISED_DUE_DATE
- 1
- early_ship_days,
'sunday', SL_UNADJ.REVISED_DUE_DATE
- 2
- early_ship_days,
SL_UNADJ.REVISED_DUE_DATE - early_ship_days)
EARLIEST_SHIP_DATE,
DECODE (
TRIM (TIMB.DAY_DESC),
'saturday', SL_UNADJ.REVISED_DUE_DATE
+ 2
+ LATE_SHIP_DAYS,
'sunday', SL_UNADJ.REVISED_DUE_DATE
+ 1
+ LATE_SHIP_DAYS,
SL_UNADJ.REVISED_DUE_DATE + LATE_SHIP_DAYS)
LATEST_SHIP_DATE
FROM (SELECT NVL (s2.sys_ent_id, '00') SYS_ENT_ID,
cust.customer_no CUSTOMER_NO,
cust.bill_to_loc BILL_TO_LOCATION,
cust.early_ship_days,
CUST.LATE_SHIP_DAYS,
ord.PART_NO,
ord.SRCE_SYS_ID,
ord.BUS_AREA_ID,
ord.BUS_AREA_ID CONTRACT,
NVL (WAREHOUSE, ord.entity_code) WAREHOUSE,
ORDER_NO,
ORDER_LINE_NO LINE_NO,
ORDER_REL_NO REL_NO,
TRUNC (REVISED_DUE_DATE) REVISED_DUE_DATE,
REVISED_ORDER_QTY REVISED_QTY_DUE,
-- NULL QTY_RESERVED,
-- NULL QTY_PICKED,
SHIPPED_QTY QTY_SHIPPED,
sold_to_abbreviation ABBREVIATION,
-- NULL ACCT_WEEK,
-- NULL ACCT_MONTH,
-- NULL ACCT_YEAR,
-- NULL UPDATED_FLAG,
ord.CREATE_DATE CREATE_DATE,
ord.CREATE_DATE RECORD_DATE,
NVL (WAREHOUSE, ord.entity_code)
BASE_WAREHOUSE,
LAST_SHIPMENT_DATE,
TRUNC (REVISED_DUE_DATE)
- cust.early_ship_days
EARLIEST_SHIP_DATE_UnAdj,
TRUNC (REVISED_DUE_DATE)
+ CUST.LATE_SHIP_DAYS
LATEST_SHIP_DATE_UnAdj,
--0 ALLOC_PCT,
--0 WHSE_PCT,
ABC_CLASS,
NVL (LOCATION_ID, '000') LOCATION_ID,
--NULL RELEASE_COMP,
WAREHOUSE_DESC,
NVL (
DECODE (MAKE_TO_FLAG,
'S', 0,
'O', 1,
'', -1),
-1)
MAKE_TO_FLAG,
ord.CREATE_DATE source_create_date,
ord.UPDATE_DATE source_update_date,
ord.CREATED_BY source_created_by,
ord.UPDATED_BY source_updated_by,
ord.ENTITY_CODE,
ord.RECORD_ID,
src.SYS_ENT_ID SRC_SYS_ENT_ID,
ord.BSS_HIERARCHY_KEY
FROM EDW_DTL_ORDER_FACT ord,
edw_v_maxv_cust_dim cust,
edw_v_maxv_part_dim part,
EDW_WAREHOUSE_LKP war,
EDW_SOURCE_LKP src,
MEDW_PLANT_LKP s2,
edw_v_incr_refresh_ctl incr
WHERE ord.BSS_HIERARCHY_KEY =
cust.BSS_HIERARCHY_KEY(+)
AND ord.record_id = part.record_id(+)
AND ord.part_no = part.part_no(+)
AND NVL (ord.WAREHOUSE, ord.entity_code) =
war.WAREHOUSE_code(+)
AND ord.entity_code = war.entity_code(+)
AND ord.record_id = src.record_id
AND src.calculate_back_order_flag = 'Y'
AND NVL (cancel_order_flag, 'N') != 'Y'
AND UPPER (part.source_plant) =
UPPER (s2.location_code1(+))
AND mapping_name = 'MEDW_MAP_GIEA_MTOS_STG'
-- AND NVL (ord.UPDATE_DATE, SYSDATE) >=
-- MAX_SOURCE_UPDATE_DATE
AND UPPER (
NVL (ord.order_status, 'BOOKED')) NOT IN
('ENTERED', 'CANCELLED')
AND TRUNC (REVISED_DUE_DATE) <= SYSDATE) SL_UNADJ,
EDW_TIME_DIM TIMA,
EDW_TIME_DIM TIMB
WHERE TRUNC (SL_UNADJ.EARLIEST_SHIP_DATE_UnAdj) =
TIMA.ACCOUNT_DATE
AND TRUNC (SL_UNADJ.LATEST_SHIP_DATE_Unadj) =
TIMB.ACCOUNT_DATE) SL_INT
WHERE TRUNC (LATEST_SHIP_DATE) <= TRUNC (SYSDATE)
GROUP BY SL_INT.SYS_ENT_ID,
SL_INT.CUSTOMER_NO,
SL_INT.BILL_TO_LOCATION,
SL_INT.PART_NO,
SL_INT.SRCE_SYS_ID,
SL_INT.BUS_AREA_ID,
SL_INT.CONTRACT,
SL_INT.WAREHOUSE,
SL_INT.ORDER_NO,
SL_INT.LINE_NO,
SL_INT.REVISED_DUE_DATE,
SL_INT.ABBREVIATION,
SL_INT.BASE_WAREHOUSE,
SL_INT.ABC_CLASS,
SL_INT.LOCATION_ID,
SL_INT.WAREHOUSE_DESC,
SL_INT.MAKE_TO_FLAG,
SL_INT.source_created_by,
SL_INT.source_updated_by,
SL_INT.ENTITY_CODE,
SL_INT.RECORD_ID,
SL_INT.SRC_SYS_ENT_ID,
SL_INT.BSS_HIERARCHY_KEY) SL
WHERE (SL.BSS_HIERARCHY_KEY,
SL.ORDER_NO,
Sl.line_no,
sl.Revised_due_date,
SL.PART_NO,
sl.sys_ent_id) NOT IN
(SELECT BSS_HIERARCHY_KEY,
ORDER_NO,
line_no,
revised_due_date,
part_no,
src_sys_ent_id
FROM MEDW_MTOS_DTL_FACT
WHERE service_lvl_flag = 'Y');
thanks
asnAlso 'NOT IN' + nullable columns can be an expensive combination - and may not give the expected results. For example, compare these:
with test1 as ( select 1 as key1 from dual )
, test2 as ( select null as key2 from dual )
select * from test1
where key1 not in
( select key2 from test2 );
no rows selected
with test1 as ( select 1 as key1 from dual )
, test2 as ( select null as key2 from dual )
select * from test1
where key1 not in
( select key2 from test2
where key2 is not null );
KEY1
1
1 row selected.Even if the columns do contain values, if they are nullable Oracle has to perform a resource-intensive filter operation in case they are null. An EXISTS construction is not concerned with null values and can therefore use a more efficient execution plan, leading people to think it is inherently faster in general. -
"view content preview in thumbnails" option is not available in view settings for "finder" for one user
I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
Is there a way to tell Safari what encoding to use if the web page fails to do that? -
I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?
Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option
-
Personal view is not available
Hi All
I got a user who is opening a sharepoint 2010 site and getting a blank page (Quick launch is there and Ribbon is there) but no content in middle.
He provided one URL and it is
http://abc.qintra.com/bu/EBCPE/EBCPEPM/LaughmanAppProjStatu/Lists/Application%20Status/PersonalViews.aspx?PageView=Personal&ShowWebPart={E23A95C8-8DAF-40A7-AF63-931D7DDD27FE}
In above URL, i can understand he was trying to open a list "Application Status" in "personal views".....When i checked all the available views for that list from List setting , i don't see any personal view there.
I tried to restore the previous backup in order to get the personal view, but it was not available there.
Please help me to understand what this url says after Personalviews.aspx...
Also please let me know if we can restore the personal view anyhow...
Thanks in advance...Hi Aditya,
The user might have created a personal view for the list library, you have to check the view using the user credential to see how the view gets rendered.
Users can create personal view, but it would be specific to them, but not to all users, and users will not be able to view other users view.
Also view might have got deleted, or has some issue.
As per your question, the url says, the view was created as personal view and specific to a webpart (Guid is given as part of the url).
To resolve, try creating a new view for the user, or ask the user to create the view as per their requirement.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
Webelements : does not support when i add the data sourcce& view in HTML
hi Masters,
i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
then it works when i view it in HTML VIEWR.
how can i make it to work despite me using the data soruce.
thank you,
pasalahi Pasala,
this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
here's what you can try though:
1) install the latest sap integration kit on your boe system machine(s)
2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
hopefully step 1 & step 2 will solve the issue.
jamie -
Inline text boxes - text not available in galley and story view
We have a book with loads of inline text boxes used as captions for inline images. The text in these inline boxes cannot be seen in story or galley view. Is there a way around this?
I think there's a fundamental knowledge gap going on here, not a bug or glitch.
ALL "normal" InDesign (.indd) files will open in InCopy with that message ("Because this document contains no InCopy stories, Galley View and Story View are not available"). That is the expected behavior. They open in InDesign fine, but they open in InCopy with that alert.
This is because without any prior preparation, InDesign files are read-only in InCopy. You can open them in IC, and you can still select text in the stories you see in Layout view, copy and paste that text elsewhere, but you can't edit them. The file is read-only.
With no editable stories, there is nothing for Galley or Story views to show. (They only show editable stories.) Thus the alert.
As Robert said, the designer has to prep the layout first. They have to export content to InCopy format. Doing so creates an external file that's linked to the layout.
Open the .indd file that's giving you trouble ... in either InDesign or InCopy ... and look in its Links panel (Window > Links). Do you see any listings for .incx files in there? If you don't see any, or they're missing, that's the root of the problem.
A detailed explanation of the step-by-step process to making it all work, with screen shots, is in this PDF:
http://www.adobe.com/products/incopy/pdfs/incopy_cs3_workflow.pdf
Of course, if you know all this already, my apologies. It's hard to tell sometimes from the posts. If Links does show .incx files and they're not missing or anything, check the the Assignments panel (in either ID or IC). Do you see any stories listed there?
AM -
I bought a Bushnell trail cam. Worked well, each video presented on the screen with the opening frame of the 10 second video. I could tell at a glance what the video was.( I have to guess it used quicktime ). I bought a second cam, same results as first. I bought a 3rd cam ,( all bushnell ), which required me to download " DIV X ", which I did. Now, I can no longer view the first frame of the 10 sec video, it just has an icon that says "AVI XXX" ( XXXbeing the number of the video ). I now have to click the icon, go to "Action" drop down "open with" and select DIV X , for each "anonymous" video, ( as I cant see what they are any more , just a number). Furthermore, I can no longer view my old videos. A message shows up saying " a required codec is not available" ***????
The 2 original cams worked for 2 years with no problem, but since downloading DIV X I cant play the older ones. I should point out that even if I select a (now) anonymous video, go to " Action", drop down "open with" and manually select quicktime, the message still shows up about the codec.
Suggestions??
Thanks for any helphello sir,
i want to your help
i was installed fresh windows 7 via cd rom and then after installed all software.
and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
[text removed for privacy]
VIMAL -
Hi,
I write the some asp code to save the word file from client machine to server machine , and convert it into the html file.
it working fine when i debug the code into the visual studio but when i deploy code on iis it give me a error 'This command is not available because no document is open' , while i try to save file into html format.
lot of time i try this give all the security full access to iis user and other things .
can any one help me. i fully frustrated from this problem.
my need only upload the word document from client to server machine and convert it into the word document.
only IIS give me the problem, suggest me what setting i need to do in iis
please help me humble requestHi,
In this forum we mainly discuss questions about Office client questions and feedbacks, issues related to coding are not supported here.
Based on the description, although the question is about converting Word documents, it's more likely to be a permission issue, the question is better to be posted in the IIS.NET forum:
http://forums.iis.net/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
Handling multiple exceptions with a single catch block
In the following code: try{ catch (NumberFormatException a) { catch (UserDefinedException b) { The code for both catch blocks are identical. Is there no way I can combine these into one block? For example, could I not do: catch ( (NumberFormatExcepti
-
Cannot install Windows XP over Windows 7 on an HP Elite 2540p laptop
Receives a blue screen error as soon as all system files are loaded and the message "Installing Windows" comes up. Tried installing first from XP Pro OEM CD, and from HP CD. Both with same results. Hard drive had Windows 7 originally. This questio
-
The OS upgrade was done by a technician so no issues there. I uploaded the current Firefox without saving my old bookmarks. I remember now that previous FF upgrades progressed without bookmark problems. Is the current problem to do with the new OS? N
-
MDM 7.1 remote key generation on different Remote Systems
I am checking onthe remote key gerneration. 1. When I import data from a remotesystem lets say A AND the data have e.g.. a vendor number in Vendors from BusinessContent the remote keys are generated for this remote system. 2. Whe I want to syndic
-
MassAllocation increase number of digits
Hi, How can we increase the number of digits in the window of MassAllocate (Hyperion planning Web Form) - for the moment the maximum number of digits that you can enter in Mass Allocate Form window using increase or decrease it's 7. We are working wi