View Customer Ageing ?
Hi,
My company has been using mySAP, component version SAP ERP Central Component 5.0, Release 9.2.0.6.0.
I am working in FICO module & would like to generate a Customer aging analysis report using F.99.The overall balances shown by the generated report do not tally with the Trial Balance generated using F.08.
What could be the problem?
Is there any other way I could generate a Customer Aging Report.
Thanks.
Hi
Please ensure that you are adding all the reconciliaiton accounts in F.08 and then matching with customer balances you got from customer ageing.
Also try to match your balances with FD10N with all range of customer.
please let me know where you getting differences
Similar Messages
-
SGD Exchange Rate Difference JE appears in Customer Aging Report
Dear Experts,
SAP Version: 8.81
Local Currency: SGD
We perform Exchange Rate Difference for a USD BP to calculate the unrealized gain/loss during month-end, JE created successfully.
Next, we go to Customer Aging Report and select this USD BP.
When i choose to view the Aging Report in Local Currency, the USD Invoice will appear in SGD + Exchange Rate Difference JE in SGD, the total balance can appear in SGD with no problem.
When i choose to view the Aging Report in BP Currency, the USD Invoice will appear in USD + Exchange Rate Difference JE in SGD, i can't see the total balance as it is appeared as xxxxx.
Above is the behaviour in 881.
Last time in SAP 2005, when i choose to view the Aging Report in BP Currency, the Exchange Rate Difference JE in SGD will not appear, therefore i can see the total balance in USD.
What is your opinion about the behavior in 881? Will you consider it as design or issue?
Thanks.
Regards,
Lay ChinDear all,
This problem is no longer there when upgrade to 881 Patch 08.
Regards,
Lay Chin -
Dear All,
I checked in SCN and did not find answer for my query so posting here.
This is with reference to customer ageing report,
we are developing z report for customer ageing since we could not get customer specific report either through standard transaction or FDI4/FDI0 level.
So, we are developing Z report for customer ageing.
My doubt is, case where Customer is also a vendor
in BSID table we can get customer open item balances. which means due and not due balances. This is clear.
but how to bring Net off balances (customer open items - vendor open items) into ageing report like (0-30, 31-60, 61-90, 91-120 & >120).
Kindly share the ideas to get net off balances into ageing.
also let me know how would I confirm that my zreport showing the correct values.
Thanks in advance.
Regards,
GaneshIn simple terminology ageing analysis is
Listing of amounts due to the business (by debtors) by splitting them into different categories based on how old the debts are.
In SAP you could view the Ageing reports of Debtors in the easy access. The path being
Financial Accounting-aAccounts Receivable-Information System-Reports for Accounts ReceivableAccounting-Customer Balances
Thanks & Regards
phaneendra -
Customer Ageing analysis by segment
Hi,
The customer ageing report does not give an ageing by segment. Though the standard line item display of the Customer reconcilidation accounts in the NEW GL does contain the paramters for the ageing, unable to find or create a report using the Report Painter that has the Segment as a characteristic.
Can somebody help with this?
Thanks
John MampillyJust a quick pointer.... Try this: S_ALR_87012167
This is AR information system and has due date analyais by evaluation views. If you not using this report, you might need to generate the evaluation views first. If you get this message, No evaluations exist. See long text, click on long text and it gives the procedure to generate the evaluations.
We are using it in our company for different views - Due date analysis by different views, similarly DSO etc.
Hope it helps.
Thanks.
Rahul -
Vendor aging report ,customer aging report
hi to all
can u pls what is vendor aging report . what is the purpose of it . can u pls some theoritical description
i will definitely reward points pls its urgent pls tell if there r any standard reports exists for theese . pls give some custom reports on theese with coding.
and for customer aging also
pls.................Hi,
Check the Vendor against report code:
REPORT zvender_os NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65.
Tables
TABLES: bsik, "open items (A/C: Secondary Index for Customers)
lfa1, "customer master
lfb1,
rf140, "temp stru (Work Fields for Corrence(SAPF140*))
bsak, "cleared items (A/c Secnd Index for Cust(Clrms))
skat.
constants and variables
TYPE-POOLS: slis.
DATA: fieldcat TYPE slis_t_fieldcat_alv,
fieldcat1 TYPE slis_t_fieldcat_alv,
fieldcat_ln TYPE slis_fieldcat_alv,
layout_in TYPE slis_layout_alv,
layout_in1 TYPE slis_layout_alv,
sortcat TYPE slis_t_sortinfo_alv,
sortcat1 TYPE slis_t_sortinfo_alv,
sortcat_ln LIKE LINE OF sortcat,
eventcat1 TYPE slis_t_event,
eventcat TYPE slis_t_event,
eventcat_ln LIKE LINE OF eventcat,
col_pos TYPE i.
DATA: targ_month(2) TYPE n, "0001
targ_year(4) TYPE n, "0001
targ_mth_abs TYPE p, "0001
doc_month(2) TYPE n, "0001
doc_year(4) TYPE n, "0001
doc_mth_abs TYPE p, "0001
mth_result TYPE p, "0001
doc_days TYPE p,
targ_days TYPE p,
addl_days TYPE p,
ext_days TYPE p,
v_days(3) TYPE c,
v_kkber LIKE knkk-kkber.
DATA:
BEGIN OF inrec OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrec.
DATA:
BEGIN OF inrect OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrect,
BEGIN OF t_item OCCURS 1000, " 0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
zfbdt LIKE bsik-zfbdt,
dmbtr LIKE bsik-dmbtr,
days(3) TYPE c,
zuonr LIKE bsik-zuonr,
END OF t_item,
t_line LIKE t_item OCCURS 1000 WITH HEADER LINE, " 0001
BEGIN OF itab OCCURS 1000,
lifnr LIKE lfa1-lifnr,
total LIKE bsik-dmbtr,
zfuture LIKE bsik-dmbtr,
zcurrent LIKE bsik-dmbtr,
crbal LIKE bsik-dmbtr,
30days LIKE bsik-dmbtr,
60days LIKE bsik-dmbtr,
90days LIKE bsik-dmbtr,
99days LIKE bsik-dmbtr,
120days LIKE bsik-dmbtr,
180days LIKE bsik-dmbtr,
365days LIKE bsik-dmbtr,
bzirk LIKE knvv-bzirk,
vkbur LIKE knvv-vkbur,
vwerk LIKE knvv-vwerk,
vkgrp LIKE knvv-vkgrp,
klimk LIKE knkk-klimk,
cashd LIKE knkk-cashd,
grupp LIKE knkk-grupp,
erdat LIKE lfa1-erdat,
name1 LIKE lfa1-name1,
name2 LIKE lfa1-name2,
stras LIKE lfa1-stras,
ort01 LIKE lfa1-ort01,
telf1 LIKE lfa1-telf1,
psort(10),
sperr LIKE lfa1-sperr,
totsal LIKE bsik-dmbtr,
txt50 LIKE skat-txt50,
gsber LIKE bsik-gsber,
END OF itab.
DATA: sel_tab TYPE TABLE OF rsparams WITH HEADER LINE,
p_debit(1) TYPE c,
p_credit(1) TYPE c.
DATA: t_variant LIKE disvariant OCCURS 0 WITH HEADER LINE.
parameters and select-options
SELECTION-SCREEN BEGIN OF BLOCK blck0 WITH FRAME TITLE text-002.
PARAMETERS: stida LIKE sy-datum DEFAULT sy-datum OBLIGATORY,
p_bukrs LIKE t001-bukrs DEFAULT 'PIIL' MEMORY ID buk
OBLIGATORY.
P_BUKRS LIKE T001-BUKRS DEFAULT 'CC01' OBLIGATORY. "0003
SELECT-OPTIONS: s_lifnr FOR bsik-lifnr ,
s_vkbur FOR knvv-vkbur,
s_vkgrp FOR knvv-vkgrp,
s_bzirk FOR knvv-bzirk,
s_konda FOR knvv-konda,
s_kdgrp FOR knvv-kdgrp NO-DISPLAY ,
s_kvgr2 FOR knvv-kvgr2 NO-DISPLAY ,
s_kkber FOR knkk-kkber NO-DISPLAY ,
s_grupp FOR knkk-grupp NO-DISPLAY ,
s_ctlpc FOR knkk-ctlpc,
s_akont FOR lfb1-akont,
s_gsber FOR bsik-gsber.
PARAMETERS: p_future AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck0.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-002.
PARAMETERS: p_abs RADIOBUTTON GROUP zrad,
p_due RADIOBUTTON GROUP zrad DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck1.
*SELECTION-SCREEN BEGIN OF BLOCK blck2 WITH FRAME TITLE text-003.
*PARAMETERS: c_run RADIOBUTTON GROUP zrac DEFAULT 'X',
c_blk RADIOBUTTON GROUP zrac,
c_all RADIOBUTTON GROUP zrac.
*SELECTION-SCREEN END OF BLOCK blck2.
*SELECTION-SCREEN BEGIN OF BLOCK blck3 WITH FRAME TITLE text-004.
*PARAMETERS: p_debit AS CHECKBOX DEFAULT 'X' ,
p_credit AS CHECKBOX DEFAULT 'X' NO-DISPLAY,
*selection-screen end of block blck3.
start-of-selection.
START-OF-SELECTION.
PERFORM BUILD_EVENTCAT.
p_debit = 'X'.
p_credit = 'X'.
PERFORM get_customer_invoices.
filter records based on selection criteria
PERFORM filter_records.
END-OF-SELECTION.
PERFORM add_sort_field.
PERFORM modify_field.
PERFORM write_report.
*& Form FILTER_RECORDS
To collect all the required data from DB and store them in
internal table.
--> p1 text
<-- p2 text
FORM filter_records.
delete records based on selection criteria
LOOP AT itab.
SELECT vkbur vkgrp vwerk erdat konda kdgrp bzirk kvgr2
INTO (itab-vkbur, itab-vkgrp, itab-vwerk, knvv-erdat,
knvv-konda, knvv-kdgrp,itab-bzirk,knvv-kvgr2)
FROM knvv WHERE lifnr = itab-lifnr
ORDER BY erdat DESCENDING.
AKS :- Not Required for PI
CASE itab-vkbur.
WHEN 'SA1'.
itab-vkbur = 'SF25'.
WHEN 'QLD1'.
itab-vkbur = 'SF23'.
WHEN 'WA1'.
itab-vkbur = 'SF26'.
ENDCASE.
AKS.
EXIT.
ENDSELECT.
IF itab-vkbur IN s_vkbur AND
itab-vkgrp IN s_vkgrp AND
knvv-konda IN s_konda AND
knvv-kdgrp IN s_kdgrp AND
itab-bzirk IN s_bzirk AND
knvv-kvgr2 IN s_kvgr2.
ELSE.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE klimk grupp cashd
INTO (itab-klimk, itab-grupp, itab-cashd)
FROM knkk WHERE lifnr = itab-lifnr
AND kkber IN s_kkber
AND ctlpc IN s_ctlpc
AND grupp IN s_grupp.
IF SY-SUBRC NE 0.
DELETE ITAB.
CONTINUE.
ENDIF.
SELECT SINGLE skat~txt50
INTO (itab-txt50)
FROM lfb1 INNER JOIN skat
ON lfb1akont EQ skatsaknr
WHERE lfb1~lifnr = itab-lifnr
AND lfb1~akont IN s_akont
AND skat~spras EQ 'EN'.
IF sy-subrc NE 0.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE name1 name2 telf1 erdat stras ort01 sperr
INTO (itab-name1, itab-name2, itab-telf1,
itab-erdat, itab-stras, itab-ort01, itab-sperr )
FROM lfa1
WHERE lifnr = itab-lifnr
IF sy-subrc NE 0 .
DELETE itab.
CONTINUE.
ENDIF.
AKS For Filteration of Customer base on Block Area.
IF c_all NE 'X'.
IF c_run EQ 'X' AND itab-sperr EQ 'X'.
DELETE itab.
CONTINUE.
ELSE.
IF c_blk EQ 'X' AND itab-sperr NE 'X'.
DELETE itab.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDFORM. " FILTER_RECORDS
*& Form GET_CUSTOMER_INVOICES
text
--> p1 text
<-- p2 text
FORM get_customer_invoices.
DATA:ztotcre LIKE bsik-dmbtr.
DATA:ztotsal LIKE bsik-dmbtr.
DATA: fsdate LIKE sy-datum.
DATA: l_perio(4) TYPE c.
MOVE stida TO rf140-stida.
MOVE rf140-stida+4(2) TO targ_month.
MOVE rf140-stida+0(4) TO targ_year.
MOVE rf140-stida+6(2) TO targ_days.
targ_mth_abs = ( targ_year * 12 ) + targ_month.
CALL FUNCTION 'ZGET_PERIOD_FROM_DATE'
EXPORTING
i_date = stida
IMPORTING
e_perio = l_perio.
CONCATENATE l_perio '0401' INTO fsdate.
select open items.
IF p_due EQ 'X'.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
LOOP AT INREC.
IF INREC-SHKZG = 'H'.
INREC-DMBTR = INREC-DMBTR * -1.
ENDIF.
MOVE-CORRESPONDING INREC TO T_ITEM. " 0001
PERFORM COLLECT_INVOICE USING INREC-lifnr INREC-DMBTR
INREC-ZFBDT INREC-ZBD1T
INREC-ZBD2T INREC-ZBD3T.
APPEND T_ITEM.
CLEAR T_ITEM.
ENDLOOP.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
For Customers Credit Balance Transaction to be display in Report
End of Credit Balance
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT.
ENDIF.
ENDLOOP.
select cleared items
IF p_due EQ 'X'.
REFRESH inrect. CLEAR inrect.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
REFRESH inrec. CLEAR inrec.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
REFRESH inrec. CLEAR inrec.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT. " 0001
ENDIF.
ENDLOOP.
ENDFORM. " GET_CUSTOMER_INVOICES
*& Form COLLECT_INVOICE
text
-->P_bsik_lifnr text
-->P_bsik_DMBTR text
-->P_bsik_ZFBDT text
-->P_bsik_ZFBDT1 text
-->P_bsik_ZFBDT2 text
-->P_bsik_ZFBDT3 text
FORM collect_invoice USING pp_lifnr
pp_dmbtr
pp_zfbdt
pp_zbd1t
pp_zbd2t
pp_zbd3t
pp_ztotsal.
doc_month = pp_zfbdt+4(2).
doc_year = pp_zfbdt+0(4).
doc_mth_abs = ( doc_year * 12 ) + doc_month.
mth_result = ( targ_mth_abs - doc_mth_abs ).
logic given by Mr. Ashok Singhvi
doc_days = pp_zfbdt+6(2).
addl_days = ( doc_days - targ_days ).
IF addl_days <= 0.
ADD 1 TO mth_result.
ENDIF.
IF NOT pp_zbd3t IS INITIAL.
MOVE pp_zbd3t TO ext_days.
ELSEIF NOT pp_zbd2t IS INITIAL.
MOVE pp_zbd2t TO ext_days.
ELSEIF NOT pp_zbd1t IS INITIAL.
MOVE pp_zbd1t TO ext_days.
ELSE.
CLEAR ext_days.
ENDIF.
CHECK with Andrew whether this is working or not
if extended payment terms exist, subtract no of mths from mth_result
IF NOT ext_days IS INITIAL.
CASE ext_days.
WHEN 30.
SUBTRACT 1 FROM mth_result.
WHEN 60.
SUBTRACT 2 FROM mth_result.
WHEN 90.
SUBTRACT 3 FROM mth_result.
WHEN 120.
SUBTRACT 4 FROM mth_result.
ENDCASE.
ENDIF.
change to key date
IF pp_dmbtr > 0.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-crbal = 0.
itab-total = pp_dmbtr.
ELSE.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-total = pp_dmbtr.
itab-crbal = 0.
ENDIF.
itab-lifnr = pp_lifnr.
itab-totsal = pp_ztotsal.
COLLECT itab.
CLEAR itab.
ENDFORM. " COLLECT_INVOICE
*& Form ADD_SORT_FIELD
text
--> p1 text
<-- p2 text
FORM add_sort_field.
DATA: l_amount(9) TYPE n.
IF p_future = 'X'.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEif itab-zfuture > 0.
L_AMOUNT = L_AMOUNT - ITAB-zfuture.
CONCATENATE 'F' L_AMOUNT INTO ITAB-PSORT.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'I' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ELSE.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEIF itab-zfuture > 0.
l_amount = l_amount - itab-zfuture.
CONCATENATE 'I' l_amount INTO itab-psort.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'J' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDIF.
ENDFORM. " ADD_SORT_FIELD
*& Form WRITE_REPORT
text
--> p1 text
<-- p2 text
FORM write_report.
PERFORM build_fieldcat.
PERFORM build_sortcat.
PERFORM build_eventcat.
PERFORM build_layout.
PERFORM start_list_viewer.
ENDFORM. " WRITE_REPORT
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
FORM build_fieldcat.
lifnr
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'LIFNR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
Name1
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'NAME1'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'Name'.
APPEND fieldcat_ln TO fieldcat.
City Details
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'ORT01'.
fieldcat_ln-seltext_l = 'City'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Credit Limit
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'KLIMK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'CRBAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Cr. Bal.'.
fieldcat_ln-seltext_m = 'Cr. Bal.'.
fieldcat_ln-seltext_s = 'Cr. Bal.'.
APPEND fieldcat_ln TO fieldcat.
Total Amount
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-fieldname = 'TOTAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-seltext_l = 'Out.St.Amt.'.
fieldcat_ln-seltext_m = 'Out.St.Amt.'.
fieldcat_ln-seltext_s = 'Out.St.Amt.'.
fieldcat_ln-ref_tabname = 'zbsik'.
fieldcat_ln-ref_fieldname = 'ZDMBTR'.
APPEND fieldcat_ln TO fieldcat.
IF p_future NE 'X'.
Future
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZFUTURE'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Future Due'.
fieldcat_ln-seltext_m = 'Future Due'.
fieldcat_ln-seltext_s = 'Future Due'.
APPEND fieldcat_ln TO fieldcat.
ENDIF.
Current
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZCURRENT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Normal Due'.
fieldcat_ln-seltext_m = 'Normal Due'.
fieldcat_ln-seltext_s = 'Normal Due'.
APPEND fieldcat_ln TO fieldcat.
30 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '30DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '0-30 Days'.
fieldcat_ln-seltext_m = '0-30 Days'.
fieldcat_ln-seltext_s = '0-30 Days'.
APPEND fieldcat_ln TO fieldcat.
60 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '60DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '31-60 Days'.
fieldcat_ln-seltext_m = '31-60 Days'.
fieldcat_ln-seltext_s = '31-60 Days'.
APPEND fieldcat_ln TO fieldcat.
90 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '90DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '61-90 Days'.
fieldcat_ln-seltext_m = '61-90 Days'.
fieldcat_ln-seltext_s = '61-90 Days'.
APPEND fieldcat_ln TO fieldcat.
99 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '99DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '91-120 Days'.
fieldcat_ln-seltext_m = '91-120 Days'.
fieldcat_ln-seltext_s = '91-120 Days'.
APPEND fieldcat_ln TO fieldcat.
*120Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '120DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '121-180 Days'.
fieldcat_ln-seltext_m = '121-180 Days'.
fieldcat_ln-seltext_s = '121-180 Days'.
APPEND fieldcat_ln TO fieldcat.
*180 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '180DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '181-365 Days'.
fieldcat_ln-seltext_m = '181-365 Days'.
fieldcat_ln-seltext_s = '181-365 Days'.
APPEND fieldcat_ln TO fieldcat.
*365 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '365DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '>365 Days'.
fieldcat_ln-seltext_m = '>365 Days'.
fieldcat_ln-seltext_s = '>365 Days'.
APPEND fieldcat_ln TO fieldcat.
Last Payment Date
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'CASHD'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Street Name
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'STRAS'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Telephone
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'TELF1'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Credit Group
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'KNKK'.
FIELDCAT_LN-FIELDNAME = 'GRUPP'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
*Sales District
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'BZIRK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Distt'.
fieldcat_ln-seltext_m = 'S_Distt'.
fieldcat_ln-seltext_s = 'S_Distt'.
APPEND fieldcat_ln TO fieldcat.
Sales Office
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKBUR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Off'.
fieldcat_ln-seltext_m = 'S_Off'.
fieldcat_ln-seltext_s = 'S_Off'.
APPEND fieldcat_ln TO fieldcat.
Cust Creat Date
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'ERDAT'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Del Plant
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VWERK'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Sales Group
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKGRP'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Sort Criteria
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'lifnr'.
fieldcat_ln-fieldname = 'PSORT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Sort Field'.
fieldcat_ln-seltext_m = 'Sort Field'.
fieldcat_ln-seltext_s = 'Sort Field'.
APPEND fieldcat_ln TO fieldcat.
Sales of Customer
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'TOTSAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Total Sales'.
fieldcat_ln-seltext_m = 'Total Sales'.
fieldcat_ln-seltext_s = 'Total Sales'.
APPEND fieldcat_ln TO fieldcat.
ENDFORM. " BUILD_FIELDCAT
*& Form BUILD_SORTCAT
text
--> p1 text
<-- p2 text
FORM build_sortcat.
SORTCAT_LN-SPOS = '1'.
sortcat_ln-spos = '2'. " 0001
sortcat_ln-fieldname = 'PSORT'.
sortcat_ln-up = 'X'. " 0001
sortcat_ln-subtot = 'X'.
APPEND sortcat_ln TO sortcat.
CLEAR sortcat_ln.
SORTCAT_LN-SPOS = '2'.
SORTCAT_LN-FIELDNAME = 'lifnr'.
sortcat_ln-spos = '1'. " 0001
sortcat_ln-fieldname = 'NAME1'. " 0001
sortcat_ln-up = 'X'.
APPEND sortcat_ln TO sortcat.
ENDFORM. " BUILD_SORTCAT
*& Form BUILD_EVENTCAT
text
--> p1 text
<-- p2 text
FORM build_eventcat.
eventcat_ln-name = 'TOP_OF_PAGE'.
eventcat_ln-form = 'PAGE_HEADER'.
APPEND eventcat_ln TO eventcat.
ENDFORM. " BUILD_EVENTCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM build_layout.
layout_in-colwidth_optimize = 'X'.
layout_in-no_hotspot = 'X'.
layout_in-zebra = 'X'.
layout_in-get_selinfos = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
FORM start_list_viewer.
DATA: pgm LIKE sy-repid.
pgm = sy-repid.
if t_variant[] is initial.
t_variant-report = pgm.
t_variant-variant = '/ATB'.
t_variant-TEXT = '/ATB'.
t_variant-DEPENDVARS = 'S'.
append t_variant.
clear t_variant.
endif.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = pgm
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = fieldcat
it_sort = sortcat
is_layout = layout_in
i_save = 'A'
IS_VARIANT = t_variant
it_events = eventcat
TABLES
t_outtab = itab
EXCEPTIONS
OTHERS = 2.
ENDFORM. " START_LIST_VIEWER
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA l_lifnr(10) TYPE n.
READ TABLE itab INDEX selfield-tabindex.
CHECK sy-subrc = 0.
CASE ucomm.
WHEN '&IC1'.
CASE selfield-sel_tab_field.
WHEN 'ITAB-LIFNR'.
SET PARAMETER ID 'LIF' FIELD itab-lifnr.
SET PARAMETER ID 'BUK' FIELD p_bukrs.
IF itab-lifnr CO '0123456789 '.
l_lifnr = itab-lifnr.
itab-lifnr = l_lifnr.
ENDIF.
SELECT SINGLE kkber INTO knkk-kkber
FROM knkk WHERE lifnr = itab-lifnr.
IF sy-subrc EQ 0.
v_kkber = knkk-kkber.
ELSE.
CLEAR v_kkber.
ENDIF.
REFRESH sel_tab[].
MOVE: 'lifnr' TO sel_tab-selname,
'P' TO sel_tab-kind, " PARAMETER
itab-lifnr TO sel_tab-low.
APPEND sel_tab.
CLEAR sel_tab.
MOVE: 'KKBER' TO sel_tab-selname,
'P' TO sel_tab-kind, " PARAMETER
v_kkber TO sel_tab-low.
APPEND sel_tab.
CLEAR sel_tab.
SUBMIT rfdkli41
USING SELECTION-SET 'VAR1'
WITH SELECTION-TABLE sel_tab
AND RETURN.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
WHEN 'ITAB-ZCURRENT'. " 0001
v_days = 'CUR'.
PERFORM display_line_item_level.
WHEN 'ITAB-ZFUTURE'.
v_days = 'FUT'.
PERFORM display_line_item_level.
WHEN 'ITAB-30DAYS'.
v_days = '30D'.
PERFORM display_line_item_level.
WHEN 'ITAB-60DAYS'.
v_days = '60D'.
PERFORM display_line_item_level.
WHEN 'ITAB-90DAYS'.
v_days = '90D'.
PERFORM display_line_item_level.
WHEN 'ITAB-99DAYS'.
v_days = '99D'.
PERFORM display_line_item_level.
WHEN 'ITAB-120DAYS'.
v_days = '120D'.
PERFORM display_line_item_level.
WHEN 'ITAB-180DAYS'.
v_days = '180D'.
PERFORM display_line_item_level.
WHEN 'ITAB-365DAYS'.
v_days = '365D'.
PERFORM display_line_item_level.
WHEN 'ITAB-TOTAL'.
v_days = ' '.
PERFORM display_line_item_level. " 0001
ENDCASE.
ENDCASE.
ENDFORM. "USER_COMMAND
PAGE_HEADER
FORM page_header.
WRITE:/115 'Time:', sy-timlo.
WRITE: /115 'Date:', sy-datum.
WRITE: /52 'Customer Outstanding Agewise ', "0002
115 'Page:', sy-pagno.
SKIP.
IF p_abs EQ 'X'.
WRITE: /52 'Vendor Outstanding Agewise (Absolute Aging)',
115 'Page:', sy-pagno.
ELSE.
WRITE: /52 'Vendor Outstanding Agewise (Due Date Aging)',
115 'Page:', sy-pagno.
ENDIF.
SKIP.
ULINE /(132).
WRITE: /02 'Open Items as of:', stida.
IF NOT s_vkgrp[] IS INITIAL.
IF s_vkgrp-high IS INITIAL.
WRITE: 52 'Sales Group :',s_vkgrp-low.
ELSE.
WRITE: 52 'Sales Group :',s_vkgrp-low,'to',s_vkgrp-high.
ENDIF.
ELSE.
WRITE: 52 'Sales Group : All'.
ENDIF.
IF NOT s_grupp[] IS INITIAL.
IF s_grupp-high IS INITIAL.
WRITE: 107 'Credit group :',s_grupp-low.
ELSE.
WRITE: 107 'Credit group :',s_grupp-low,' to',s_grupp-high.
ENDIF.
ELSE.
WRITE: 107 'Credit Group : All'.
ENDIF.
WRITE: /02 'Comapany Code :', p_bukrs.
IF NOT s_konda[] IS INITIAL.
IF s_konda-high IS INITIAL.
WRITE: 52 'Price group :',s_konda-low.
ELSE.
WRITE: 52 'Price group :',s_konda-low,' to',s_konda-high.
ENDIF.
ELSE.
WRITE: 52 'Price Group : All'.
ENDIF.
IF NOT s_ctlpc[] IS INITIAL.
IF s_ctlpc-high IS INITIAL.
WRITE: 107 'Risk category:',s_ctlpc-low.
ELSE.
WRITE: 107 'Risk category:',s_ctlpc-low,' to',s_ctlpc-high.
ENDIF.
ELSE.
WRITE: 107 'Risk category: All'.
ENDIF.
IF NOT s_vkbur[] IS INITIAL.
IF s_vkbur-high IS INITIAL.
WRITE:/02 'Sales Office :',s_vkbur-low.
ELSE.
WRITE:/02 'Sales Office :',s_vkbur-low,' to',s_vkbur-high.
ENDIF.
ELSE.
WRITE:/02 'Sales Office : All'.
ENDIF.
IF NOT s_kdgrp[] IS INITIAL.
IF s_kdgrp-high IS INITIAL.
WRITE: 52 'Customer group :',s_kdgrp-low.
ELSE.
WRITE: 52 'Customer group :',s_kdgrp-low,' to',s_kdgrp-high.
ENDIF.
ELSE.
WRITE: 52 'Customer group : All'.
ENDIF.
IF NOT s_ktokd[] IS INITIAL.
IF s_ktokd-high IS INITIAL.
WRITE: 107 'Account Group:',s_ktokd-low.
ELSE.
WRITE: 107 'Account Group:',s_ktokd-low,' to',s_ktokd-high.
ENDIF.
ELSE.
WRITE: 107 'Account Group: All'.
ENDIF.
IF NOT s_lifnr[] IS INITIAL.
IF s_lifnr-high IS INITIAL.
WRITE: /02 'Vendor No :',s_lifnr-low.
ELSE.
WRITE: /02 'Vendor No :',s_lifnr-low,' to',s_lifnr-high.
ENDIF.
ELSE.
WRITE: /02 'Vendor No : All'.
ENDIF.
IF NOT s_kkber[] IS INITIAL.
IF s_kkber-high IS INITIAL.
WRITE: 52 'Credit Control Area:',s_kkber-low.
ELSE.
WRITE: 52 'Credit Control Area:',s_kkber-low,' to',s_kkber-high. -
Open invoice customer ageing query
I have set up a query to find a customer aging report - open ivoices. I just want to have open records... does anyone have a better query for this?
SELECT TOP (100) PERCENT dbo.OCRD.CardName, dbo.OCRD.Balance, (CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 0 AND
30 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [0-30], (CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE())
BETWEEN 31 AND 60 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [31-60], (CASE WHEN DATEDIFF(DD,
T0.REFDATE, GETDATE()) BETWEEN 61 AND 90 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [61-90],
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) > 91 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [90+],
dbo.OCRD.CardType, T1.TransType, T1.TransCode, T1.LineMemo, T1.BaseRef, dbo.OCRD.CardCode, T1.BalDueDeb
FROM dbo.OJDT AS T0 INNER JOIN
dbo.JDT1 AS T1 ON T1.TransId = T0.TransId INNER JOIN
dbo.OCRD ON dbo.OCRD.CardCode = T1.ShortName
WHERE (dbo.OCRD.Balance >= 1) AND (dbo.OCRD.CardType = 'C') AND (T1.BalDueDeb > 0)
ORDER BY dbo.OCRD.CardName
Regards,
knutKnut,
Try this:
SELECT T2.CardName, T2.Balance,
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 0 AND
30 THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '0-30',
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 31 AND
60 THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '31-60',
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 61 AND
90 THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '61-90',
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) >90
THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '90+',
T1.TransType, T1.TransCode, T1.LineMemo, T1.BaseRef, T2.CardCode
FROM dbo.OJDT T0
INNER JOIN dbo.JDT1 T1 ON T1.TransId = T0.TransId
INNER JOIN dbo.OCRD T2 ON T2.CardCode = T1.ShortName
WHERE (T2.Balance >= 1) AND (T2.CardType = 'C') AND (T1.BalDueDeb != T1.BalDueCred)
Thanks,
Gordon -
Grouping customers and view customer open items list - Group wise
Hi.
I have some requirement from my client.
He says that he want to view customer open items list group wise.
In FBL5N we can give the selection of multiple customers. But he wants to group the specific customers and then view the open items for this group.
For example: Client has 10 customers and out of these customers he wants to select and group 5 customers. And then he want to view open items list for this group.
Can anyone help me how to group these specific customers in the total customers list. Also request you to provide me the option to view open items for this group of customers.
Regards,
PadmavathiHi Padmavathi,
It is possible. use Worklist for Customers.
Go to OB55 and define a Worklist for Customers, and mention the list of Customers that you want to see under that Worklist.
After this, when you to to FBL5N, you will get an option to select Worklist to run the list of open items.. and it would show open items of all customers that you have defined in your worklist.
Also note that you will have to go to FB00, tab Line Items, and tick Worklists available. This is at User Level, so only that user will be able to see the worklist in his FBL5N transaction code.
Regards,
SAPFICO
Edited by: SAPFICO on Feb 10, 2011 11:43 AM -
Printing Dunning Letter at Customer Aging
My client is using SAP B1 2005 SP1 Patch 42.
Dunning term and dunning level has been properly set up.
We have also design the dunning letter for dunning level 1, eg called it DunningLetter#1
When using Dunning Wizard, SAP prints the letter for dunning letter for dunning level 1 with no problem. However it does not allow preview on the screen.,
Therefore, we try to running Customer Ageing by Due date so that we can see the dunning level, if needed change it. However, when try to print preview dunning letter, it shows nothing on the screen. However, it can be printed directly to the printer.
Is this how it is supposed to work? Ie, we cannot print preview dunning letter.Hi Shwu
This is a known limitation on SAP Business One. You could try printing to a document generator or PDF, but unfortunately the system updates the dunning level with each print regardless of printer.
Kind regards
Peter Juby -
Asking Exchange rate at the time of Customer aging report
Dear All,
I am facing one problem, when I am asking customer aging report the system is asking to enter exchange rate.but at the time of vendor aging is working fine does not asking any exchange rate,this problem happens only one specific user, not for other users.
In other users it is working fine.Do we need to do any configuration for that user for working this customer aging report.
Please give solution as soon as possible
Thanks advance.
Regards
Komanduri.We faced the same problem today.
Finally, we found out the user accidentally selected the currency which we didn't set the exchange rate in the aging report.
After the aging report is generated, we can change the currency in the upper left corner.
If we didn't set the rate of that currency, it will keep asking.
Even if we close the aging report and open again, it will still ask for that currency before it could generate the report
When we set the rate of that currency, it will not ask exchange rate again -
Vendor/Customer Age analysis
hello
the std vendor/creditor age analyses reports don't have 30/60/90 day analysis columns. how do you adaapt the reports to analyse by 30 day periods and which reports do you use? this is ecc 6 classic g/l
thanks.Hi Abaper's ,
S_ALR_87012085 - Vendor Payment History with OI Sorted List
F.22 Customer ageing
I want to see this T-code.. Program name from se93 . so how i can ? I am not getting this Program name ?
pls help as I new in this project .
Warm Regards ,
Navin -
Customer Aging Report Query (without invoices offset by incoming payment)
Hi All Experts,
May I know is there any field from JDT1 mention which invoices is already offset by the Incoming payment or AR Credit note? Because I do not want those invoices that already offset by incoming payment appear at the Customer Aging Report. Meaning, the data appear in the Customer Aging Report is only show those invoices that yet to pay by the customer. Kindly give some advise on it. Thanks a lot.
Thanks and regards,
Angie NgHi David,
Thanks for your suggestion. I have try it, but all of my JDT1.IntrnMatch is in 0 value. Meaning in my situation it is none of any reconcilliation making. But from my SBO window, i manage to see that actually this incoming payment is pay for which invoices. Problem is it is difficult for me to do the possiblity logic that might be happen in my Customer Aging Report Query. Please give some advise that how to show only those invoices yet to pay? The current query will show all the data no matter the invoices or credit memo has been offset.
select OCRD.cardcode 'Supplier Code',OCRD.cardname 'Name',sysdeb 'Debit GBP',syscred 'Credit GBP',
case JDT1.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 30
and (datediff(dd,refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 60
and (datediff(dd,refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 > 90
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then syscred * - 1
end
end "90 + days"
from JDT1,OCRD where JDT1.shortname = OCRD.cardcode and cardtype = 'c' and intrnmatch = '0'
ORDER BY OCRD.CARDCODE, taxdate -
Hi Friends,
As per my knowledge,Customer Aging Report consider only those documents(ar invoice,ar downpayment,incoming payment-payment on a/c,ar credit memo) which are open and showing balance due and standalone JE against Customer.
As I cross checked,I found those standalone JE where Customer and round off account are considered as debit,credit are not considered by 'Customer Aging report'.
So,I just want to know what are all the logic based on which SAP B1 standard report 'Customer Aging ' (without reconciled transaction ) consider the documents????Which SAP B1 Version and Patch is under use at your end ?
There were issues in SAP B1 regarding reconcilliations in versions prior to 2007 series.
Samir Gandhi -
Customer ageing report for fbl5n
hi all,
I want to develop an customer Ageing Report in abap to calculate the net due date which is similar to the Tcode fbl5n but the problem is functional consultant told me about this tcode and there is no such information regarding the specified tables which are to be used. I had searched in SDN also but i did not got the desired information.
regards,
karthik
Edited by: k.vinu.karthik on Jul 23, 2010 7:21 AMUse the development tools available to you - the transaction and a sample account is all you need. Debug, ST05, SE30, etc....
-
Problem in Logic for Customer Ageing Report
Hi,
I am developing a Customer Ageing Report in which i am facing a problem i.e. i am taking tables BSID,BSAD in which i ham taking the open items first and then i am using for all entries in it on the open items and i had debugged it and data picking is correct .
But the MAJOR problem comes when the data is stored in the respective coloumns i.e. 0-30 ,31-60-61-90 etc.. Currently i am comparing the code with the Standard Report i.e.S_ALR_87012126 it is not coming accurate...
Is there any way to solve this problem ....
Edited by: nav009 on Jan 8, 2010 11:39 AMHi,
First you need to calculate the Due date of the Transaction with the help of FM 'NET_DUE_DATE_GET'.
Once you get the Due date calculate the value wf_nod as wf_nod = p_budat - wf_due_date where p_budat is the date on which you want to run the ageing report and wf_due_date is due date of the transaction.
once you get this wf_nod write the following logic :
IF wf_nod < 0.
wa_tab-ndue = wa_data-dmbtr.
ELSE.
IF wf_nod <= pnod1.
wa_tab-amt1 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod1 AND wf_nod <= pnod2.
wa_tab-amt2 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod2 AND wf_nod <= pnod3.
wa_tab-amt3 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod3 AND wf_nod <= pnod4.
wa_tab-amt4 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod4 AND wf_nod <= pnod5.
wa_tab-amt5 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod5.
wa_tab-amt6 = wa_data-dmbtr.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
Collect wa_tab into it_tab.
where pnod1.......pnod5 are the aging period as 30,60,90,180,365 etc.
by this you will get correct results.
Please get back to me if you need some more help on this.
Regards,
Nikhil -
Hi all,
Our client requires aging report
for a customer in the following format
Customer Code,Name,0-30 Days,31-60 days,61-90 days,
91-120 days,121-150 days,151-180 days,180 + above days,Row Total (all days).
Condition: By Aging date
Thanks
JeyakanthanHi Jeyakanthan,
SAP Business One displays the relevant open receivables in four columns for the time interval for customer aging report.
The fourth column includes open receivables for the days/months/periods prior to the first three columns. For more information please refer to the explanation for 'Time Intervals' field in Online help.
Based on the testing in 2007 version, it is improved that there is one more column added there, which means if you set 'Time Intervals' as month, you may get five columns in aging report, the first four columns are for 4 months and the last column shows open receivables for the months prior to the first four columns.
Regards,
Van Xue
SAP Business One Forums Team
Maybe you are looking for
-
Removed Battery from MB to clear CMOS, Now no MSI splash screen, no booting
My System: CPU: AMD 720 X3 2.3 Mhz per core. MB: MSI K9A2 Platinum, Version 1, 1.4 Memory: OCZ Platinum II memory, 4 1gb sticks. 667 GPU: Gigabyte Radeon HD4850, 1GB memory HD: Seagate Baracuda 7200 500GB memory card. RAID. Recently replaced. I c
-
Interactive PDF Form Field Text properties InDesign CS6
I am new to InDesign CS6 (upgraded from CS4) and after advice when attempting PDF form creation. Is there a way of defining text style of text colour font for the form field, (in the same way thay is possible if I was editing the PDF within in the te
-
External SWF Disappears on Browser resize
I am loading external swf's inside content_2 and when i resize my browser the external content OR content_2 disappears. Can someone help me as to what I need to do to stop this. I've tried adding an onresize function but that does not work. Here my a
-
FX 1.0 Scene Builder beta samples won't run in Netbeans
Hi, I downloaded samples that are added to JavaFX Scene Builder from: http://download.oracle.com/otn-pub/java/javafx_scenebuilder/1.0/javafx_scenebuilder_samples-1_0-beta-b32-26_mar_2012.zip I imported it to netbeans ide and then I tried to run proje
-
Hey guys, I've recently submitted a podcast feed to iTunes...it was verified and accepted, and I can click the link they gave me to subscribe to it, but when I search for it I get nothing....any ideas??? OLD Windows 2000