View for Newly-Released TV Shows

Hello,
It seems a very important view on the "TV Shows" tab has been removed in the past week.
There used to be a box about halfway down the page that showed the TV Episodes which had just been released.
For example, if a new episode of Mad Men came on TV on Sunday, then this episode would show up in this box around 1AM on Monday morning.
What happened to this box? It mysteriously disappeared when the formatting changes for the new rental mechanism came earlier this week. I have stopped using iTunes and I will not use it again until there is a way to have the same view. Amazon On Demand now has a much better way of seeing which episodes (of all genres) have just became available.
Thanks for your help,
-Svourdroculed.

Are you certain that you're using Album View for your movies, and not Coverflow?
EDIT: Nevermind, I see what you're talking about (had to switch the view of my own movies to see). I don't know if there's a workaround for this. You might want to submit feedback about the different views.

Similar Messages

How Long does it take for newly released movies to be available on iTunes

How long does it take for newly released movies to be available on itunes

When they're released as DVDs.

:: NWA does not show table view for monitoring reports ::

Hi,
We are facing an issue in one of our portal system.
I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
Here I get the resource utilization graphs.
The graphs show proper values however when I click on table view it does not show any value or table at all.
Then I click on Settings button, and click on Persistent radio button.
It asks to enter the number of days for which the the data should be stored.
I gave it as 2 days and click on Apply button.
It shows a message saying "changes would be effective after restarting monitoring service".
However when I go there i.e. NWA --> Administration --> Applications
I get below services
cafruntimemonitoring~ear
com.sap.ip.bi.sdk.monitoring
tclmwebadminmonitoravail~wd
tclmwebadminmonitorcomplib~wd
tclmwebadminmonitorprovider_ear
tclmwebadminmonitorstate~wd
tclmwebadminoverviewmonitoring~wd
tcmonitoringsysteminfo
Would you kindly suggest which service from above list should be restarted ?
Thank you, Regards,
Girish Garje.

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

Is there a way to set the default view for the App Store to only show Apps for iPads when the Store is launched?

I'm a new iPad owner and would like to set the default view for myself to show only Apps for the iPad when I launch the the App Store app. Showing apps for iPhone seems a waste of real estate for me and time spent searching for a particular app since I do not own an iPhone.
Thanks for any assist. :-)

Hi ..
That's not possible as yet but you can provide feedback to Apple here.

Content Viewer for Desktop not showing/working

Hi,
After updating the DPS Desktop Tools for CS6 (2.04.1) on windows for my Creative Cloud CS6, the Content Viewer isn't working anymore: pressing the preview button open the preview popup loading progress bar (which I guess prepare all the files), disapear when the process is done, then nothing.
My only way to preview my modifications is to update the downment in the folio, then downloading the udpate on my iPad (no direct preview on iPad, I'm on windows).. and it's not reallyproductive!
I tried to find the application itself to launch it manually, with no luck.. and also, to see if it's not a firewall issue (I'm using windows default one, and using Avast for the virus protection).
Thank you for your help

Thanks, but still not all people in a team will have an ipad, but all work on a computer. The problem is settled anyway with the download of the Viewer that exists for both Mac and Windows.
Diane
Le 2012-10-11 à 07:41, Totyo a écrit :
Re: Content Viewer for Desktop not showing/working
created by Totyo in Digital Publishing Suite - View the full discussion
I confirm this last message from Bob. quick tests are good on the desktop viewer, but it doesn't reflect what can be your folio on a device.
just too bad that you can't preview on the iPad on Windows...
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4766104#4766104
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4766104#4766104
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4766104#4766104. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Wrong folio shows in Adobe viewer for windows

We have produced a folio for ipad 1024x768 and same(almost) folio for iphone 960x640.
Ipad version (1024x768) will also be published on Windows and Android. When I check in the Adobe Content Viewer on Windows it shows the iPhone version (960x640)
How can I control that it becomes Ipad version who will open the windows and Andoid viewer?
We have a folio, 1024x768px for iPad, Windows and Android.
We have a 969x640 folio that will only be published on the iphone
We have a enterprise app with custom store front
How do we solve it
regards
Ake

I'm looking in Adobe content viewer for Windows
/Ake
Skickat från min iPhone
18 sep 2014 kl. 16:49 skrev Neil Enns - Adobe <[email protected]>:
wrong folio shows in Adobe viewer for windows
created by Neil Enns - Adobe in Digital Publishing Suite - View the full discussion
Are you looking in Adobe Content Viewer or a custom app? If so, what’s your custom app name?
Neil
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6741464#6741464
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to configure and set a default view for contents of a data set

Here is my scenario:
I have a document library where each item is a "Plan". "Plan" is of a custom content type that inherits from a Document Set content type but has some additional attributes such as Plan Type. Inside each Plan, each item is
a Plan Document which is of custom content type Plan Document which inherits from Document content type but has some additional attributes e.g. Document Status.
So the hierarchy is:
All Plans (document library)
Plan 1 (custom content type that inherits from Document Set but also has a "Plan Type" attribute)
Plan Document (custom content type that inherits from Document but also has a "Document Status" attribute
When I click on the document library, I want to see all the folders (e.g. Plan 1) where one of the columns will be "Plan Type"
When I click on an individual Plan (e.g. Plan 1) I want to see the contents of that custom document set. At this point, since this page shows contents of one document set, I want to see the column "Document Status" but NOT Plan Type since
Plan Type applies to the document set as a whole, not to an individual item in that document set.
However, I don't think I have it set up correctly because right now the "Plan Type" column is visible both on the list of all document sets AND on the page that shows the contents of one document set.
I've found a discussion on this topic here:
http://sharepoint.stackexchange.com/questions/61565/how-can-i-set-a-custom-default-view-for-a-document-set
where one person said "When you click on a Document Set content type in library settings, one of the options is "Document Set settings". The last option in this dialogue allows you to select a defined view on the library that will be used
to show the contents of that Document Set." I don't see that view selection. The last item on the document set settings page is "Update List and Site Content Types". The field before that is for customizing the Welcome page.
However, I don't want to customize the Welcome Page as a whole, I just want to customize the columns that are displayed on the list of content of this document set.
thanks

I finally found the answer:
At the document library level, create a new view to use when displaying the files in the document set
Go to the document library settings
Select your custom content type (in my case it was "Plan")
In the next screen select Document Set settings
Select your newly created view at the Welcome Page View section
Press Ok
Now the default All Documents view will be shown when displaying all the document sets and the newly created view will be displayed when viewing one document set with the files within.

Email accounts cant view for more than 3 seconds??? Weird

I loggin to email, shows for like 3 seconds, then goes back to main screen. I cant keep any (3 accounts, one mobile me, one office, one yahoo)open long enough to click and view for any period of time. I already use latest iphone software version.

Couple of things to try:
First, a simple reset. You won't lose any data or settings.
Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo(ignore the slide to power off), then release.
See it that fixes the issue. If not proceed:
Delete the accounts in question from your phone. Turn the phone off, then back on & recreate the accounts. See if that fixes the issue. If not, proceed:
Restore your phone as a "new" device, not from a backup. Recreate your accounts & see if that fixes the issue. If it does, re-sync your content. You will lose all saved data in apps, messages, etc if you restore as new.

WinHelp viewer for Windows 7

Just in case anyone may need it, Microsoft have released a viewer for WinHelp files under Windows 7. Click here to download it.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n).

Well, I have the Adobe Cloud subscription which includes InDesign, so installing the Adobe Content Viewer is not a problem.
All I really want to know is if you can use touch controls to navigate in Adobe Contnet Viewer on the MS Surface. It could be unlikely but as Neil said above, it might magicly work : )
The reason I am looking at the Surface is because I thought it would be a good portfolio/presentation device to show to clients in a tablet form that could also show Flash which most tablets can't.
If it could show Adobe Content Viewer folios that I have already created for the iPad and utilize touch controls, that would be the best solution.

HT201412 I cannot open the month of March 2013 in my iPad3 calendar. I can however see it in the year view for 2013 and I can view the daily and weekly calendars for March 2013. Any ideas what has gone wrong ? Thanks

I have a new iPad3 and have found I cannot open the month of March 2013 when I tap on it. All other months open OK ! I can see March 2013 in the yearly view and I can open the individual days, and weeks, of March 2013 but I cannot see the whole month in the monthly view. When I try to open the monthly view for March 2013 it returns me to the start screen which shows all the apps etc and closes the Calendar app. Any guidance of what is going wrong and how it can be corrected. Thanks !

Don't worry we have to start somewhere. Feel free to post your questions here, we learn from each other.

How do I hide time stamp in iCAL month view for Mavericks 10.9?

I want to hide the time in Month View like I could before in 10.8. Please help! Calendar is too cluttered in month view for me to read. In 10.8 you could select or deselect "Show time in month view". Is there a way to do this in Maveriks 10.9?

I have this same question! I DON'T WANT THE EVENT TIME TO SHOW ! I often just put my events anywhere on my calendar and have them take up 3 or 4 hours just so they show up larger, disregarding the times on the calendar, but rather typing my own times in at the beginning. So, having the actual calendar event time show is very confusing. Before the update, you could UNCHECK, show event times. NoW that option does not exist!! There must be a way to go into the system, and disable this function, however I am not computer literate enough to know how to do it without specific instructions. DOES ANYONE OUT THERE KNOW HOW TO DO THIS??? Thanks in advance!!

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

There are more than one Applications folders. At the root level of your system is an Applications folder for all users, where most installations go. Every user, including you, also has a separat Applications folder.
Check all of them.

AppleTV: How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming from my iTunes?

How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming music from my iTunes?
Thanks.

Thank you Winston. I guess we need to ask that this feature gets added at least as an option in an upcoming release. When someone is using shuffle, it helps to know what is playing while viewing pictures.
Where is my Apple request button when one needs it ? :-) Cheers, C

The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2

INSTEAD of Trigger View for an Oracle EBS New form development

Hello,
I am developing a new EBS form based on a database view.
This form is an EBS form will run in an 11.5.10.2 environment and developed using 6i.
The form has one data block that is based on the view. The view is joined and based on following tables.
Hz_Parties Hp,
Hz_Cust_Accounts
Hz_Cust_Acct_Sites_All
Hz_Party_Sites
Hz_Locations
Ra_Salesreps_All
Hz_Cust_Site_Uses_All
Ar_Vat_Tax_All
xx_custom_table t
The view is inherently not updatable. Therefore, I am thinking to write an INSTEAD OF trigger on the view. The question. The form which is based on the view is require to update Oracle EBS tables mentioned above. As you know, there are APIs available to update above tables.
Typically, you would write API in a program unit in the form and call from triggers. But here the form is based on the view. And to support DMLs on the view, I HAVE TO write INSTEAD of trigger(or that is the only way i know) so the question is:
1. Do I write these APIs under INSTEAD of triggers?
2. Or, I write these API in the form triggers and write DML referencing OLD and NEW values in INSTEAD of trigger? Where, these OLD and NEW values will refer on above tables.
Please advise.
And lastly, Do I have to write an INSTEAD of trigger? The USER_UPDATEABLE_COLUMNS view for this table shows no columns are updateable at the moment
Thanks,
A

As you know, there are APIs available to update above tables.No, I don't B-) You'd better ask this in the eBusiness Suite form, as this is very EBS, not Forms, specific.
In general, I would say that in this case you can use the EBS API's in the instead of trigger, not in the form.
Or you can base the form on stored procedures, not directly on the view.

View for Newly-Released TV Shows

Similar Messages

Maybe you are looking for