View (Global & Local) on a query

Hi,
I got a query with 60 Free chars(drill down)
Insted of creating a multiple queries of the same content ,My requirment is to create views (6) on a same query (easy in support point of view)
How can i create a view on a query
What is difference between Global & Local view
How to create them and
The views that i want to create users won't be authorised to change them
BW Version 7.0
Users access reports using WEB Bex
Please advise

Hi
How can i create a view on a query
After the execution of the report make the necessary drill down based on the Free char and Save that as a View using save view as Global.
Then when everyou open the View it will display the drill down that you saved by default.
Reggards
M.A

Similar Messages

Urgent : OBIA - Handling multiple Global, Local and Document Currencies

All,
I need input on how to configure multiple currency codes in DAC for OBIA 7.9.6.x
My client's business goes around the the world and with multiple local currencies.They also need reporting currency to be multiple like in Euro, USD etc.
I went through a couple of threads in this forum,like -
Re: Configuring Global Currencies in BI Apps 7.9.6 for EBS 11.5.10 Source
Re: How we are using Global, Local and Document Currencies in DAC.
But I have some confusion regarding the configuration of DAC's 3 Global currency codes.
In order to fulfill my requirement - should I add additional codes in DAC?
Basically How am I supposed to handle multiple Local,Document and Global currencies? And then possible changes in rpd/reports required also?
Regards,
Krish

Currencies are discussed in the Setup and Configuration Guide here:
7.1.1.2 How to Configure Global Currencies
To configure the global currencies you want to report in your warehouse:
In the DAC Client, display the Design view.
For more information about logging into the DAC, see Section A.1, "How to Log Into the DAC Client".
Select a container from the drop down list to the right of the Execute button.
Display the 'Source System Parameters' tab.
Locate the following parameters and set the currency code values for them in the 'Value' box:
$$GLOBAL1_CURR_CODE (for the document currency).
$$GLOBAL2_CURR_CODE (for the local currency).
$$GLOBAL3_CURR_CODE (for the global currency).
Make sure that you spell the currencies as they are spelled in your source OLTP system.
Save your changes.
As far as for PLP items, those are Post Load Processing elements that perform cleanup tasks after the Base Warehouse tables have been loaded. They should never be modified and frankly run without any issues provided the rest of the plan executes properly. Do you have a specific quesiton about a PLP?

Views - SELECT from VIEW and SELECT from the query inside view definition returning different results

Hi,
I am facing this weird issue. Any help would be appriciated.
I have view with the following definition:
CREATE VIEW [marketing].[OpenedMails]
AS
SELECT
ID_EmailAddress,
ID_Date_Opened,
ID_Contact,
ID_MailSendJobs,
COUNT(ID_OpenedMails) AS OpenCount,
CASE
WHEN ROW_NUMBER() OVER (PARTITION BY CAST(ID_EmailAddress AS VARCHAR(10)) + ' ' + CAST(ID_MailSendJobs AS VARCHAR(10)) ORDER BY ID_Date_Opened) = 1 THEN 1
ELSE 0
END
AS UniqueOpenCount
FROM
dbo.Fact_OpenedMails
where ID_Contact = 382340
GROUP BY ID_EmailAddress, ID_Date_Opened, ID_Contact, ID_MailSendJobs;
order by ID_MailSendJobs
When I run the the select statement in the view definition I get combination of both 1 and 0 for the 'UniqueOpenCount' column.
But when I run the select from the view itself using the following query:
SELECT [ID_EmailAddress]
,[ID_Date_Opened]
,[ID_Contact]
,[ID_MailSendJobs]
,[OpenCount]
,[UniqueOpenCount]
FROM [marketing].[OpenedMails]
I get equal amount of rows but only 0 values for the 'UniqueOpenCount' column which seems to be very weird to me. Why is this happening ? Can anyone help regarding how to solve this ??
Result from the select inside view definition:
Result from the select query directly from the view:
Thanks in advance.
Vivek Kamath

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. You failed. Temporal
data should use ISO-8601 formats – you failed again. Code should be in Standard SQL AS much AS possible and not local dialect.
This is minimal polite behavior on SQL forums.
Things like “ID_Date_Opened” are wrong. The affixes “id” and “date” are called attribute properties in ISO-11179 and data modeling. Since a date is a unit of measurement on a temporal scale, it cannot be an identifier by definition. My guess is this would be
“open_date” if it were done right. And the only display format in ANSI/ISO Standard SQL is ISO-8601 (yyyy-mm-dd)
An email address of -1?? Email addresses are VARCHAR(256), not numeric. There is no reason to cast them AS string!
Your vague “mail_send_jobs” is plural, but columns hold scalars and cannot be plural by definition. The partition cause can hold a list of columns:
WHEN ROW_NUMBER()
OVER (PARTITION BY email_address, mail_send_job
ORDER BY open_date)
= 1
THEN 1 ELSE 0 END
This still makes no sense, but the syntax is better. You do not understand how ROW_NUMBER() works.
Would you like to try again with proper Netiquette?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Unexpected error when attempting to view Global Navigation (root site top navigation)

I am getting an “unexpected error” when attempting to view Navigation settings at the root site of our SharePoint environment. We are running SharePoint 2013 site collection in SharePoint 2010 compatibility mode. The error happens when you try
to view Global (Top-Level) Navigation Settings in our SharePoint root site.
(Relative URL: /_layouts/AreaNavigationSettings.aspx).
I copied the exact errors from SP Logs below. There is some null reference cited. Where is the root of the problem?   Any information would be helpful!
First, there is a general “Medium” level event that cites an Application Error
Time:
06/10/2014 11:42:01.96
Process:
w3wp.exe (0x2538)
Thread (Hex):
0x1930
Product:
SharePoint Foundation
Category:
General
EventID:
8nca
Level:
Medium
Correlation:
3194999c-3ebd-e089-7f01-acff58324051
Message:
Application error when access /_layouts/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.PublishingPage.GetEffectivePageCacheProfileId(Boolean anonUserProfile)
at Microsoft.SharePoint.Publishing.CachedPage..ctor(PublishingPage page, SPListItem altItem, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedPage.CreateCachedPage(PublishingPage page, SPListItem altItem, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedListItem.CreateCachedListItem(SPListItem item, SPListItem alternateItem, Boolean parentIsWeb, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWrappedObject(SPListItem superUserVersion, SPListItem superReaderVersion, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedArea.GetChildForListByQuery(String listName, SPQuery query, SPWeb contextWeb, Boolean onlyPopulateCache, Boolean skipIfThrottled, List`1& itemsFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.FetchDynamicItems(PublishingWeb pubWeb, NodeTypes includedTypes, Boolean& websFetched, Boolean& pagesFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildrenInner(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildren(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Then, there is the “Unexpected” level event that cites a NullReferenceException
Time: 6/10/2014 11:42:01.96
Process: w3wp.exe (0x2538)
Thread (Hex):
0x1930
Product:
SharePoint Foundation
Category: Runtime
EventID:
tkau
Level:
Unexpected
Correlation:
3194999c-3ebd-e089-7f01-acff58324051
Message:
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.Publishing.PublishingPage.GetEffectivePageCacheProfileId(Boolean anonUserProfile)
at Microsoft.SharePoint.Publishing.CachedPage..ctor(PublishingPage page, SPListItem altItem, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedPage.CreateCachedPage(PublishingPage page, SPListItem altItem, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedListItem.CreateCachedListItem(SPListItem item, SPListItem alternateItem, Boolean parentIsWeb, CachedObjectFactory factory, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWrappedObject(SPListItem superUserVersion, SPListItem superReaderVersion, List`1& fieldInfo)
at Microsoft.SharePoint.Publishing.CachedArea.GetChildForListByQuery(String listName, SPQuery query, SPWeb contextWeb, Boolean onlyPopulateCache, Boolean skipIfThrottled, List`1& itemsFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.FetchDynamicItems(PublishingWeb pubWeb, NodeTypes includedTypes, Boolean& websFetched, Boolean& pagesFetched)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildrenInner(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildren(NodeTypes includedTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi ,
According to your description, my understanding is that you encountered the error “Application error when access /_layouts/AreaNavigationSettings.aspx, Error=Object reference not set to an instance of an
object” when you try to enter Navigation Setting page.
For your issue , please refer to the blog:
http://praveenix.wordpress.com/category/uncategorized/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Hi , How to make a calculated kf as local in the query definition

Hi ,
How to make a calculated kf as local in the query definition
Regards,
Ravi.

Hi,
Calculate KF consists of Basic, restrict and other calculated kFs stored in Metadata repository.
Calculate KF is a replicate of Formula and acts as Global.
Calculate KF acts as Global--you can use Globally.
Formula as Local--you can use as local to Query.
you can create the Calculate KF as follow:
Goto Query Designer>Open/Create Query>Select Key Figures Mode on left side of Query>Select that KF node> right click Select Calculate Keyfigure.
then one popup window dispays, so you make the calculations based on Basic KF, Restirct Kf and Formule. then save it.
Regards,
Suman.

Getting a "Displaying only the newest results below. To view all results, narrow your query by adding a filter" message in error

I have a list with almost 10000 items. I have a view that should be returning 8 items. For me, the Farm Admin, I see the full set of expected values. The message "Displaying only the newest results below. To view all results, narrow your query by
adding a filter" shows for other users. This makes no sense -
there ARE filters on this view. I'd rather not increase the throttle limit.
Anthony Kelly

Hi Ajk,
Check that the list is not scoped by an audience; but, I'm afraid that either way admin, (e.g. non Farm admin or site collection admin)
I'd recommend exporting to excel, create two new spreadsheets and then import as custom lists.
Best of luck and cheers,
Stacy Anothersharepointblog.blogspot.com

Global, Local, Harmonised attributes.

Hi,
Could anybody explain me about the Global, Local, Harmonised attributes and how we should use them with Template project and Implementation project.
Regards,
Murali

You set these attributes against the nodes in your Template Project's Business Process Structure. The purpose of maintaining these attributes is to have control, or lend flexibility, to your rollout (implementation projects).
When you set an attribute of global it means that items cannot be changed and that they must be included as part of the implementation project. For example, if you maintain your Procure to Pay scenario (and all processes, steps beneath it) as global, the implementation project cannot change the scope, documents, configuration entries, transactions, or whatever else you attach.
Localizing items in the BPS allows flexibility for the implementation projects to change everything assigned at a local level.
You can also provide different flavors of these attributes. For example, you might set all of your scenarios and processes to global however the process steps performed in organizations around the globe will obviously not match a global "headquarters". For that reason you could set the process steps to Local.
Hope this helps,
Nathan

Thumbnail view of local network .pdf files on iPad?

Problem: I have about 250+ Lego Building Instructions saved on my MacPro. My kids like to rebuild the sets and I'm looking for a way to view these form our iPads WITHOUT me having to sync them.
Is there any app that offers a visual/thumbnail view of local network pdf files?
I'm aware that I could upload them all to Dropbox, but even then I was not able to find a visual view in the Dropbox app. And, since there is no need to go up to a cloud I'd like to avoid that step.
I would rather not have them even kept on the iPads but rather just have the iPads view the copy from my hard drive and then trash it on close off said magical app.
Any suggestions?

no one? nothing? anyone? anything?

View image based on the query

view image based on the query
hi i what to download my image based on the following query,am in jdeveloper 11g am using this method for download,i show the whole link of procedure where the query is located and how was it used in forms,but nw i what to take the query and put it in my java code not the webutil just the query,i put the whole forms package so you can undestand the logic of the query how was it used
    public void ViewImage(FacesContext facesContext, OutputStream outputStream)
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
        // get an ADF attributevalue from the ADF page definitions
        AttributeBinding attr = (AttributeBinding) bindings.getControlBinding("DocumentImage");
        if (attr == null)
            return;
        // the value is a BlobDomain data type
        BlobDomain blob = (BlobDomain) attr.getInputValue();
        try
        {   // copy the data from the BlobDomain to the output stream
            IOUtils.copy(blob.getInputStream(), outputStream);
            // cloase the blob to release the recources
            blob.closeInputStream();
            // flush the output stream
            outputStream.flush();
        catch (IOException e)
            // handle errors
            e.printStackTrace();
            FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, e.getMessage(), "");
            FacesContext.getCurrentInstance().addMessage(null, msg);
    }when i use the above method in diffient screen without the upload i get this error
Target Unreachable, identifier 'viewImage' resolved to null
Error
The file was not downloaded or was not downloaded correctly.
the below procedure is how i what to download the image but in java,but usin query in below procedure
function right_file (idref integer, i_file varchar2) return boolean is
begin
     -- check directory
     -- file size
       if webutil_file.file_exists(dir ||'\' ||i_file) then
       return true;
       end if;
return false;
end;
procedure download(i_dref integer, i_file varchar2) is
file varchar2(50);
dlin_id integer;
l_success boolean;
begin
     if not right_file (i_dref ,i_file ) then
          select file_name,dlin.id
          into file, dlin_id
          from sms_document_links dlin
              ,sms_document_references dref
          where dref.id = i_dref
          and dref.dlin_id = dlin.id
   l_success := webutil_file_transfer.DB_To_Client
                     ( dir ||'\'|| file,
                       'SMS_DOCUMENT_LINKS',
                       'DOCUMENT_IMAGE',
                       'id = '||dlin_id);
end if;
end download;
procedure open_image (i_dref integer,i_file varchar2) is
begin
     local_path;
local_viewer;
     if I_file is not null then
          file := i_file;
     else
          select file_name into file
          from sms_document_references
          where id = i_dref
     end if;
     download(i_dref, file);
     if not webutil_host.ID_NULL(active_process) then
    close_previous_image_process;
     end if;
     image_dir_file := dir ||'\'|| file;
     process := webutil_host.nonblocking (image_viewer || image_dir_file);
     if webutil_host.ID_NULL(active_process) then
          active_process := process;
     end if;
     if webutil_host.equals(process,active_process) then
          null;
     else
    close_previous_image_process;
    active_process := process;
     end if;
     viewer_active := true;
end;--

oh ho.
Dear user,
this is not code factory/design factory/bla bla bla.
this area for guide peoples where you are? what is way right to reach your target/goal. whatever in you words...
from your post and also procedures, you are from forms background. am also came from ORacle froms 10g background try to understand. and implement it adf.
back to topic:
Target Unreachable, identifier 'viewImage' resolved to null Error .i just am giving the steps to igonre your error
simple go to your taskflow - go to overview section - go to managed beans. configured you which you created bean say as x.java
if you create following code can be seen in source
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="xx-V-TF">
    <default-activity id="__1">xxV</default-activity>
    <managed-bean id="__2">
      <managed-bean-name id="__4">SUP1040V</managed-bean-name>
      <managed-bean-class id="__5">com.x.x.view.xBeans.xxV</managed-bean-class>
      <managed-bean-scope id="__3">backingBean</managed-bean-scope>
    </managed-bean>
    <view id="xV">
      <page>/ReportsPageFragments/xxV.jsff</page>
    </view>
    <use-page-fragments/>
</task-flow-definition>
</adfc-config>

How to view complete date stamp in query result view in sql developer?

Hi,
In the query result, the date present in db is shown as DD-MM-YYYY format but I want to view the complete date stamp. When I view the same data in aqua data studio, I see the complete time stamp. Please let me know if I need to do some settings in Oracle SQL Developer so that complete date is shown?
How to view complete date stamp in query result view in sql developer?
Thanks in advance,
Vineet

864793 wrote:
Hi,
In the query result, the date present in db is shown as DD-MM-YYYY format but I want to view the complete date stamp. When I view the same data in aqua data studio, I see the complete time stamp. Please let me know if I need to do some settings in Oracle SQL Developer so that complete date is shown?
How to view complete date stamp in query result view in sql developer?
Thanks in advance,
VineetAlternatively you can execute below
set nls_date_format='DD-MM-YYYY HH24:MI:SS';Regards,
Achyut K

Local Currency At query Level

Hi All,
Is their a way to permanently set local currency at query level. Or do we have to set the currency conversion on all the fields.
Kind Regards
James

Yes,You will have to set at each KF at query level.But if you want for all the KF's at one shot,you may have to do the currency conversion for all the KF's at backend cube level in transformations.
Is this conversion based on the current day at query level?, if so, the cube level calculations would not be right since the cube data will get conversions based on that days load.

Problems with Views based on a Hierarchical Query

Datamodeler 3.1.3.706 (SQL Dev 3.2.10.09):
When creating a view that utilizes a Hierarchical Query, the Query Builder encounters various difficulties:
When pasting in SQL code, if the view is saved without first clicking the update diagram button, the object in the view entity relationship diagram provides a faithful representation of the view without errors, but when reopening the view, the code is missing.
Simple Example using the classic emp table:
SELECT level lev
      , emp.*
   FROM emp
CONNECT BY prior empno = mgr
START WITH mgr        IS NULLIf the update diagram button is pushed to refresh the graphical view. It mangles the connect by clause and the view gets marked with a warning/error icon in the relationship diagram, but the now mangled code remains available on reopening the query builder.
Same code as above after clicking the Update Diagram button:
SELECT Level lev
, emp.*
   FROM emp
CONNECT BYFurther issues are encountered if the query contains any of the CONNECT_BY_% hierarchical pseudo columns:
SELECT level
      , emp.*
      , connect_by_root emp.ename root_ename
   FROM emp
CONNECT BY prior empno = mgr
START WITH mgr        IS NULL;In this case pasting in the code and clicking either the Update Diagram button or the OK button results in an "Unexpected Token" parsing error.
These issues are encountered with both the Logical and Relational models.
Is this a known issue? I've searched this forum but haven't found any references to it.
Thanks,
Sentinel

Hi Sentinel,
I logged a bug for that.
You can try DM 3.3 it deals better with first problem, parsing of connect_by_root operator will pass if you don't use alias.
Philip

Using several global structures in one query?

Hello Together,
I want to use several global structures in a query and group them for instance in the rows. I have tried it out, and it does not seem to be possible.
Any ideas- can I overgo this problem somehow?
Thanks,
Elisabeth

Hi Elisabeth,
This should help:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a5632e09411d2acb90000e829fbfe/content.htm

Displaying only the newest results below. To view all results, narrow your query by adding a filter.

Hi,
In one of my list there are 33,000 records.
It gives message "Displaying only the newest results below. To view all results, narrow your query by adding a filter."
I don't want to change my threshold limit. Can anybody please tell me steps to resolve this issue?
Regards,
Amit Khatri

I have a list of 11,000 items. Even though I have setup filters on it and it shows all 10 records based on that filter, it still shows that warning on top. For some items, even with those filters, I don't see the list items at all. How do I deal with
this situation. I don't want to change my threshold limits from CA either. Please help.
MAK

Global & Local controller

Hi Guys,
Am new to Mars, so execuse me if the question is simple.
i cannt understand what is the difference between global & local controller.
i've only one Mars appliance and want to connect it to the network, do i need to use global controller? or only the local? so, again what is the diference between the two controllers.
Thanks & Regards,
Ramii

If you only want 1 MARS, then you only need to get the Local Controller.
You would only need to get Global controller if you would like the Global controller to manage all your Local controllers.
Here is what the global controllers are capable off:
• Aggregation of reports across the Local Controller deployment
• Defining Rules, Reports and User accounts for Local Controllers (Note: Configuration of Local Controller is done "locally" on the individual LC appliance)
• Remote, distributed upgrade of the Local Controllers
Hope that helps.

View (Global & Local) on a query

Similar Messages

Maybe you are looking for