View log 'no log found'

Hi,
I created a analysis but this ends up in no result. So I want to open the logfile (via view log) but there is only a message 'no log found'. There is a place in oracle EM where I have to set this, but where......
regards Robbert
ps OBI version is 11.1.1.3.0
Edited by: RobbertD on Nov 4, 2010 4:30 AM

Hi
Please make the Logging level = 2 in the RPD(Administration tool).
Please tell if you are using 11G
Thanks

Similar Messages

HOW TO VIEW DATA IN LOG VIEW - PROCESS CHAIN?

HAI FRIENDS,
I SIMULTANEOUSLY LOADED DATA INTO ODS AND INFOCUBE....I USED THE PROCESS CHAIN TO LOAD DATA.. BUT AFTER ACTIVATING, I COULD N'T VIEW THE DATA IN THE LOG.AFTER THAT I FOUND OUT DATA IS NOT LOADED INTO THE ODS ..SO I ACTIVATED IT AGAIN.. DID THE PROCESS CHAIN ACTIVATE.. EVEN AFTER THAT I COULD NOT VIEW DATA IN LOG VIEW AND ALSO WHEN I CLICK ON LOAD DATA PROCESS(ODS) NO DATA IS FOUND.. PLS HELP OUT
WITH REGARDS
APPU

Hi,
Go to the manage screen for that ODS. See teh relevent request and find how many records were transferred and how many added.
If it is zero added records, then check for any rules.
Arun
Assign pts if useful

How do I view IOS system log files on my iPhone?

I'm getting occasional buzzes on my iPhone when it is in silent mode, but it's not obvious where the buzzes are coming from. How can I view the IOS log files on the phone to figure out which application is generating the alerts?

Hey Steve,
You'll want to connect your phone to your computer and sync it in iTunes. You can read more about it here:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

I purchased some movies off iTunes from my account from my fathers IPad as a gift but didn't realize can not view if not logged with my account. Is there any way to save directly to the IPad (regardless of account)? Or transfer to him so he can view have?

I purchased some movies off iTunes from my account (but from my father IPad) to download as a gift,
but didn't realize he can not view if not logged in with my account.
Is there any way to save directly to the IPad (regardless of account) so he can view?
Or transfer to his account?
Or is any was to cancel the recent purchase if can not transfer as I will not watch these myself?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

How to view my call log from a month ago

I have a few numbers that I need from last month and I want to view my call log history from December how do I do that?

Contact your carrier to download your call history, you might have to log into your provider account to see the details.

Cannot view web server logs in Server Admin

It has been a terrible day.
First, the interesting part:
I woke up to find that 25 sites that are hosted on an XServe G5 running OS X Server 10.3.9 had been defaced. As the part-time, unpaid admin of this server, it was my responsibility to track down the vulnerability in the system and restore the defaced files from backups. The hacker had replaced the index.html file for each of the sites with his own, special version, in which he proudly declared that my server had been owned. I did a Nessus scan of the server and came up with nothing. I pulled what was left of my hair out looking for every vulnerability I could come up with, and still nothing.
I then decided to use Google to get more information about him, using the name he proudly posted on the defaced sites, and was able to get his IM address. I proceeded to have an awkwardly pleasant conversation with him, in which he declared that he has discovered a new vulnerability and decided to try it out on my machine for the challenge. He apologized, but would not reveal the vulnerability (although he hinted that it had something to do with mod_security). He also promised to leave my machine alone now ....
(Now for the not so interesting part, and the nature of my current problem)
Anyway, I did what I could to clean up the mess, and wound up viewing the access logs in the Console app via ARD. That led me nowhere, so I decided to call it a night and logged out of ARD. A few minutes later, I thought I would log into ServerAdmin and take another look at those logs, but alas, they could no longer be viewed through ServerAdmin! The log section is empty. I ssh'd into the machine to see if he had broken his promise and messed around some more, but the logs still existed where they had always been. I ran tail -f on them to make sure they are still being updated, and they are.
So after all that, it seems my big problem at the moment is viewing logs in ServerAdmin. I did not make any changes to httpd.conf (outside of disabling mod_security, which commented out the appropriate LoadModule and AddModule lines). I also disabled a few other unnecessary mods earlier in the evening via ServerAdmin, but I doubt that any particular mod controls whether or not I can view log files in ServerAdmin.
I apologize for the length of this post, but it has been quite a day. If anyone can provide any clues as to either the location of error logs for the ServerAdmin app or any sort of known resolution to this issue, I would name my first born after you.
Thanks.
XServe G5 Mac OS X (10.3.9)

skvaish1 wrote:
What purpose you will solve by loading the web server logs into the database? I will not advice it. It will be much easier for you to manage these logs at file system level as well monitor these for any issues, rather than loading it into database and then running sone database job to dig into those logs for any errors. Loading logs into database will help if you need to keep them for long time (More than 1 Year time frame or for regulatory purpose), otherwise it is better for logs to keep it on file system and just get regular backups of these logs into tape.
My 2 cents
RegardsOverall, I agree but I don't understand your comment about "Loading logs into database will help if you need to keep them for long time". Even if needed for regulatory reasons, one can manage them quite nicely outside of the database.
Also to expand on this a bit for the OP .... if the need arose to use SQL to mine the logs for information that would be hard to get using the search feature of a simple text editor, one could always define an external table on an as-needed basis.

Materialized View with No Logging Option;;; THX

Hi all,
What's the diffrence between a :
Materialized View with No Logging Option
Materialized View with Logging Option
thank you

LOGGING|NOLOGGING specifies that subsequent Direct Loader (SQL*Loader) and direct-load INSERT operations against a nonpartitioned index, a range or hash index partition, or all partitions or subpartitions of a composite-partitioned index will be logged (LOGGING) or not logged (NOLOGGING) in the redo log file.
In NOLOGGING mode, data is modified with minimal logging (to mark new extents invalid and to record dictionary changes). When applied during media recovery, the extent invalidation records mark a range of blocks as logically corrupt, because the redo data is not logged. Therefore, if you cannot afford to lose this index, you must take a backup after the operation in NOLOGGING mode.
If the database is run in ARCHIVELOG mode, media recovery from a backup taken before an operation in LOGGING mode will re-create the index. However, media recovery from a backup taken before an operation in NOLOGGING mode will not re-create the index.
An index segment can have logging attributes different from those of the base table and different from those of other index segments for the same base table.
Message was edited by:
HAGGAR

Sony SR-11 video "backjerks" in Project viewer but not Log Transfer viewer

For example, in both the project canvas and viewer, people's heads may be turning to the right in the frames leading up to "backjerk" frame and again after the "backjerk" frame, but their heads jerk to the left at the "backjerk" frame. For example,for clip 805:
Frame
06:24 normal progression
07:00 - 07:06 normal progression
07:07 picture jumps back to same image as frame 07:00
07.08 picture jumps forward to expected image after frame 07:06
07:09 - 07:19 normal progression
07:20 picture jumps back to same image as frame 07:13
07:21 picture jumps forward to expected image after frame 07:19
The "backjerk" frames move 1 frame with each succeeding frame count of 24. Hence in the next batch of 24 frames, the "backjerk" frames are 08:08 and 08:21, and so on.
When viewed in the Log and Transfer Viewer or camcorder, there is no "backjerk". Quicktime was unable to open the files copied directly from the camcorder stream. Quicktime could open the files after transfer and saving but had the same "backjerk" problem.
The video was recorded on a Sony SR-11 at 25 fps, AVCHD 1920x1080 and transferred to FCE using Log and Transfer. Capture did not work due to lack of firewire connection. The clips appeared in the Log and Transfer Window, were dragged to the lower area where "drag media here" appeared, and were saved in a project.
When the clips were dragged to the canvas in the project, I tried both yes and no to the question as to whether I wanted to change the format to be compatible with the External Video. Neither worked.
The Easy set up is "HD", "25 fps" and "AVCHD Apple Intermediate Codec/50".
FCE is version 4.0.1. Computer is MacPro, OS X Version 10.5.7; Processor: 2 x 2.26 GHz Quad-Core Intel Xeon. Memory: 6GB 1066 MHz DDR3, 170 GB of memory available on HD
Any suggestions?

maresol wrote:
Dear Tom,
I don't think your questions were directed at me or ?
If you look at the header of each thread you will see an "in response to" with a name attached. That's helpful in figuring out who's talkng to who. It's a good idea to start a seperate thread for questions, piggy backing can get a bit confusing.
What are the Sequnce settings that these clips are used in?
HDV-Apple Intermediate Codec 1080i60 should be the one.
Al

SAP TABLE TO VIEW THE APPLICATION LOGS OF IDOCS

Hi,
Can you please suggest where I can see the table to view the application logs in idocs. We can see this individually in SLG1 or MM90. But I need to see it collectively to see all the error messages. Please suggest.

Hi
You can check tables:
EDIDC- for control records
EDID4-for Data Records
EDIDS-for Status records
You can also use T Code WE02 or WE05
Thanks & Regards
Sanil Bhandari

Viewer wanted for Logging FW in JDK 1.4

Hi all,
has anyone ever seen a viewer/interface for the Logging FW introduced in JDK 1.4? I mean something similar to LogFactor5 or Chainsaw for Log4J. I have been looking for it for a while but still without any results.
Thanks a lot in advance,
Dora

The new version of log4j's Chainsaw can view jdk1.4 logging events.
Available via Web Start:
http://logging.apache.org/log4j/docs/chainsaw.html
Chainsaw v2 can view jdk 1.4 util.logging events:
1- written to disk using the xml formatter, or
2- sent over the wire via sockethandler (again in xml format)
Use the file menu, load java util file if you're loading a log file saved in jdk1.4 util.logging's xml format.
If you're using a sockethandler:
Chainsaw's Welcome panel provides both a tutorial and an 'example receiver configuration'. The XMLSocketReceiver is the example you would use to receive jdk1.4 util.logging events over a socket.
You can define this receiver in the app - Select the view menu, show receivers, pick the 'new' icon, and select xmlsocketreceiver, using the 'org.apache.log4j.xml.UtilLoggingXMLDecoder' decoder and appropriate port.
Scott

'Content viewing' in 'Audit Log reports' throws timout error

I have enabled 'Reports' in the site collection features and I am tryin gto generate the 'Content viewing' in 'Audit Log reports'. This keeps me waiting for a couple of minutes and throws a timeout error. Could you please let me know why is this happening
and is there any way to resolve it ?
I am getting the below error in UI and in my logging database
System.Exception
Reason: Request timed out. URL:
https://Mydomain/Mysitecollection/_layouts/RunReport.aspx/Content_viewing.xml
Thank you
Regards Rahul A

Hi,
According to your issue, firstly, please check if your hardware performance is poor or the site collection has numerous data, if so, improve the hardware or pull the
data out of the tables, then check the effect.
Secondly, if you cannot view audit reports for the site http://servername /sites/sitename
Try to detach and attach content database for the site you want to view, then check the effect.
Thanks,
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

How to view concurrent program LOG from custom FORMs

Hi,
How to view concurrent program LOG from custom FORMs?
Thanks
ESL

Hi Thanks for your response....
lets assume there are 2 buttons, first button to submit concurrent program and second button to view concurrent program output/log.
Actually im able to submit concurrent program from oracle custom form(6i) in ebusiness(11.5.0.2) i.e first button (WHEN-BUTTON_PRESSED buitin).
Rather user navigating to VIEW-> REQUEST, i would like to give option to user to view concurrent program output/log when user clicks on second button (WHEN-BUTTON_PRESSED buitin)
How can i achive this?
Thanks,
ESL

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

It shows the log sequence not found error while all the log seqences exist?

Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repository

Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA

View Organizer Sync Log File

when i am trying " Configure sync logging options"
In that i am unable to open view organizer sync log file.
it gives me message
AdobeReader could not open "Synclog.html" because it is either not a supported file or because the file has been damaged
Can anyone please help me to solve this problem

Hey,
hav u uninstalld nokia pc suite frm ur PC?
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Help, How to view the error log of oracle Job

Hi all,
I created a job in my database, which clears the archivelog. After the job is executed, it occurs error.Such as :
RMAN清理归档日志 1 问题 2010-3-19 下午03时11分00秒 GMT+08:00 PTDB 数据库实例 SYSTEM RMAN 脚本
How to view the error log of oracle Job?
Thank you.
Eric Zhou

Hello,
Besides some views (with the scheduler) that you can get on the link below:
http://download-west.oracle.com/docs/cd/B28359_01/server.111/b28310/scheduse002.htm#CHDGIDFD
You may use the LOG parameter with RMAN so as to generate a logfile on the server.
Also from EM DBConsole (starting with 10g) you may have the RMAN Backup Report.
Hope this help.
Best regards,
Jean-Valentin

View log 'no log found'

Similar Messages

Maybe you are looking for