View multiple versions of content concurrently

I am currently working in an IT team that is beginning to use Webcenter Sites, and I was asked if there was any way to view multiple versions of web content side by side, to see changes made etc. I've not come across this feature before, does anyone know if it is possible to do such a thing using WCS, or if there are any plugins that can perform this?
Cheers,
Harrison

Hello Harrison,
What do you mean with "view multiple versions of web content side by side, to see changes made"?
You can enable the revision tracking by assettype in order to track the last versions.
Regards,
Gerardo

Similar Messages

Actual and Plan Versions annual view - Multiple versions per company code

Good Day,
Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
Kind Regards

Remove restriction on comp code. There could be 2 models.
1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

HT201616 Multiple versions of same song by different artists

iTunes used to have a feature where you can view multiple versions of the same song by different artists. Is there still a way to do this without having to search through the entire iTunes store? That way takes forever and I have to sample tracks that are completely unrelated, but just happen to have the same title. Why in the world would the dumb iTunes geeks take this feature away. Someone please help. Thanks!

Have not been in ITUNES Store in quite awhile but
If it was a function, it would rely on the person or persons who authored the song to insure you did get the same lyrics so to speak.
So, if you didn't know the artist you wanted - or the authors of the song - you would have to sample them until you hit the correct one.
Itunes did grow over time - and if they did have cross reference by authors they may have removed it - on the other hand like searches may have worked because of a limited database at the time - it did seem to start adding songs based on searches that brought up nothing one time - and a month later there they were.
ITUNES has over time added restrictions - for instance at some point - you had to allow this computer on Itunes in order to have itunes synchronize to an IPOD (I purchased about 6 songs on old mac - after migration synchronized fine until they stopped - finally mac allowed more than one device so I could add this one and synchronization started again).
Here are latest restrictions with windows and Mac if you want to burn CD's of your itunes
cant burn cd in itunes
http://support.apple.com/en-us/HT203173
http://support.apple.com/en-us/HT203164
http://support.apple.com/kb/PH12147?viewlocale=en_US&locale=en_US
Important: You can’t burn movies and TV shows purchased from the iTunes Store to a DVD or VCD that plays in a DVD player or to a Video CD.
http://support.apple.com/kb/PH12149?viewlocale=en_US&locale=en_US

Starting Multiple Versions of Weblogic

Hi,
Is it possible to run multiple versions of weblogic concurrently ?
I have 8.1 and 9.2 on my server.
Whenever I login to the console in 9.2, my console in 8.1 will be logged out.
If yes, please let me know the steps to take if able.

Hi,
Yes, you can use multiple versions of weblogic concurrently.
However the issue you are facing is because the browser keeps the session of the previous logged in WLS version and when you try to log in to the other version of WLS it first close the old sessions and then open the new session.
Try to use 2 different browsers say log in in WLS 9.2 using Firefox and WLS 8.1 using IE/Chrome you would notice that it would work just fine. And if you want to use only one browser then now days you have an option as "Private Browsering" in FF and Chrome which would also solve this problem.
Regards,
Ravish Mody

To view the flash technology content in this pdf file please install this version of flash player

I am getting an error while opening a pdf file I am using Windows 7 with adobe 10.1.7 installed error message " to view the flash technology content in this pdf file please install this version of flash player"

Both ActiveX and plugin? What versions?

Adobe Acrobat Message : ''To view the flash technology content in this PDF, please install the version of flash player that supports Adobe reader and acrobat "

I am using interop acrobat dll in one of my client , when trying to open a pdf file in acrobat X the following message appears :
''To view the flash technology content in this PDF, please install the version of flash player that supports Adobe reader and acrobat "
Is there any workaround to fix this issue ?...
will installing the flash player fix the issue ?
thanks

i am trying to convert the pdf to tiff image using
//Using ACROBAT PRO
AcroAppClass app = new AcroAppClass();
AcroAVDoc doc = new AcroAVDocClass();
i tried downloading the flash player ,now the error does not appear but for those pdf that displays this flash message error i am not getting the pdf converted to tiff file , instead i get an image with message
What could be the cause of this issue ?

Multiple version of same package being distributed

Hello,
So i have a package ABC being distributed to site 01. When I check the sender log it is showing it is distributing multiple version of ABC. is this possible? Should it not distribute latest version only?
In process sending SWD package ABC version 2 to site 01, current completion ratio = 19 percent.
In process sending SWD package ABC version 3 to site 01, current completion ratio = 1 percent.
In process sending SWD package ABC version 4 to site 01, current completion ratio = 1 percent.

Hi,
Did you edit the package when the content distribution hasn't finished?
I just distributed a package to a DP, then edited the package when it was still in progress. From my sender.log, it continued distributing package version 1 and started to send version 2.
So I think it is the way of SCCM worked.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Multiple versions of the same RAW image

Hi All,
It's posible to have multiple versions of the same RAW file. Let's say I work my RAW file and make some changes, can those changes become an independent file? I want to be able to go back to the original RAW file without loosing any other version already created.
Best regards,
Jose

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

Multiple versions of the same Web Dynpro application on the same SAP Portal

I have a single application (local development) and deploy directly to a SAP Portal(NW 7.0) from NWDS Version: 7.0.15
No problems there, works like a charm.
But I want to have multiple versions of the same application on one portal. Eg. ill build a version 1.0 for test and deploy this. Then continue to work on version 1.1 deploying this directly on the portal. The two versions should now co-existing under different names and/or packages.
Please help.

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

How to view multiple files' info in a single window

I remember I can view multiple files' info in a single window before, but now I have to viewed multiple files' info in each their own window. It's very inconvenient to me, I want to get a solution to resolve it. Please do me favor, Many Thanks!
Message was edited by: 5imacintosh

Select them and press the Option, Command, and I keys at once. The resulting window will change its content based on the selection.
(45010)

Can i give multiple versions in purchase inforecord for same vendor and mat

can i give multiple versions in purchase info record for same vendor and mat code..is is possible??? plz help me
thanks and regards
Ramesh Reddy(VALLUR)

HI,
No .where you are getting version in purchasing info record ? why you want version ? suppose we put version then where you used that version ?
to get clear picture regarding purchasing info record
check following link
[http://help.sap.com/saphelp_46c/helpdata/en/75/ee102f55c811d189900000e8322d00/content.htm]
Regards
Kailas Ugale

Multiple Table of Contents

I am using Captivate 5 and I am creating a course which will essentially contain 3 different version inside of it, I'm wonderign if it is possible to have multiple Tables of Contents within a single course?
Thanks!

I ran into a similar issue. Mine was a broad topic with "subchapters", for want of a better term. I wanted my users to be able to jump around within topics as needed and the simple TOC didn't cut it. Plus I had several slides during my simulation that were about 1 sec in length so I had several slides named "Cont." on the TOC...not very pretty. My workaround was to create my subchapters as separate projects and then pulled them all together in the aggregator. It wasn't perfect but it was close. I've added the ability to create sub-TOCs to the feature request page. Maybe I should bribe the Captivate developers with cookies???

Using Views to access XML Content

I was wondering if anyone can help me in these questions.
I created a view to access XML Content in the database for reports. My first question is I have 18 properties in the xml document but when I created the view I only retrieve one property information. What dO I need to change in my XPath query to get all the properties see script below
CREATE OR REPLACE VIEW AHA_PMCO_BUILDINGS_VIEW
(BUILDINGID,NUMBEROFFLOORS, CONSTRUCTIONDATE,NAME, BUILDINGTYPE, DEMODISPODATE,MODSTARTDATE,MODENDDATE, ISANNEX) as
select extractValue(value(p),'/Building/@Id'),
     extractValue(value(p),'/Building/@NumberOfFloors'),
     extractValue(value(p),'/Building/@ConstructionDate'),
     extractValue(value(p),'/Building/@Name'),
     extractValue(value(p),'/Building/@BuildingType'),
     extractValue(value(p),'/Building/@DemolitionDispositionDate'),
     extractValue(value(p),'/Building/@ModernizationStartDate'),
     extractValue(value(p),'/Building/@ModernizationEndDate'),
     extractValue(value(p),'/Building/@IsAnnex')
from "Pmco438_TAB" X, TABLE(xmlsequence (extract(value(X), '/Pmco/Properties[1]/Property[1]/Buildings/Building')) ) p;
How do I change my script to retrieve multiple properties instead of just one property
Thanks
Dibor

Hi Paul
I have access to all the documents (JavaScript via Mozilla, Adobe JavaScript API, XFA API etc etc) but none are specific enough to cater for this issue. I will work this out before too long but it would be very useful if someone who had done this already could shortcut my journey!
Thanks
Roxy

Import Scenario from BPR - how to view the Version after import

On SOLAR01 when you import scenarios from the BPR, how can you view the version of the Products that were imported? Sometimes in the BPR there are several versions available to import for a particular product.
Once you have imported those business processes, how can you see the version that is tied to the one you imported?

Helmut,
If you don't have access to the server console, it might be possible to 'trick' tp into working from a workstation, but I wouldn't bet on it. You'd have to fake up a profile for it. I haven't tried this.
Peering into the contents of a delivered transport file would be something that your Basis team would typically do. My suggestion is to work with them, either to use tp command-line option from the server console, or if that's not reasonable, then yes, go ahead and add it to the import queue of one of your sandbox systems. You can always delete it from the queue again later. If you don't actually import it, it isn't going to hurt anything.
To do any of these options is going to require some level of filesystem access to your transport host, as you need to copy the two files that make up the transport there. You need to put the 'K' file into \usr\sap\trans\cofiles and the 'R' file into \usr\sap\trans\data. Then, you can either use the tp command-line tool, or you can go into STMS, go into the import queue of any system in the transport domain (so a sandbox is fine), and use Extras... Other Requests... Add and type in the transport request ID. Yes, this adds some entries about the transport into a few tables, but it doesn't actually import the transport, and it doesn't change anything about your system. It just allows the transport to show up as importable in the queue, and that will make it so that you can read the object list of the transport. Then, if you decide not to import it, you can delete it from the queue, and your system is back to the way it was before. Also, doing this will not put the transport into any other system's queue. Even if you import the transport (into a sandbox system), it won't show up in any other system's queue until you forward it.
Regards,
Matt

Handling source files for multiple versions

Ok, I've looked around on the web and multiple discussions and have yet to find an answer. We currently have two authors working on the same help project that we have handled relatively successfully under RoboSource. Our development environment has changed so that we need to be able to support multiple versions of the help at once ie- release branch vs development branch that we want documented but it is not yet slated to be in the release.
I've looked at the help for RoboSource and there is an idea of branching but not much help on how this is done or if it really maintains two sets of the files, etc. I've also seen some postings on the forum for this that have gone unanswered. Makes me suspect that perhaps RoboSource doesn't really support multiple versions of help source files. I would be happy to admit that I'm wrong here.
Another option to solve our challenge is by committing our source files to the development source system, SVN. I've noticed some threads discussing this. I'm unsure from reading these posts if RoboHelp alerts you when you are about to modify a file, such fpj or hhk, that is being used by someone else like RoboSource does. Since we still have two authors playing in the same help project it would be most efficient if it would notify us before letting us write over one another's work.
Can anyone shed some light on:
1) does RoboSource really support multiple versions of the help source files and how it is done?
2) does RoboHelp notice when a file is locked in SVN and notify the other author to keep hands off until it is committed again?
3) is there somewhere better for me to research this?
Thanks you for any assistance you can provide,
Nita

We're using RSC 3.1 with RH 8 and with RH X5, and we've found that this is actually a two-step process:
Branching is the method for copying a snapshot of a folder (to establish two branches of the same source).
Reconciling (AKA forward/back patching) is the method for synchronizing edits between branches (or not, as the case may be).
For example, a "V12.3" branch of the "main" source has been prepared for one customer's specific needs. All edits to "main" will be forward patched to "V12.3," but edits to specific areas of "V12.3" will not be back patched to "main."
Tim, my boss, prepared the tutorials below, as much for himself as for us, and I have only stripped the screenshots to protect our intellectual property. Note also that we reference two publish locations, one for internal reviewing, and one for Release Engineering to include in our nightly product builds. Your environment might only have a single publish destination. Note also that the output files are never added to RSC.
Pay special attention to your folder naming process before you start, by anticipating any potential future branching needs. Folder renaming after the fact can be problematic in RH and RSC.
Good luck,
Leon
===================================
Branching Projects in RoboSource 3.1
Since the Help for RoboSource and Robohelp lack a proper explanation for branching and updating configuration files to support proper branching, this document has been created to assist in creating future branches.
Creating New Local Directories
Individuals must create new local path directories on their systems. We use the following conventions:
Ex. C:\902_imsmerge\projects (source folder)
Ex. C:\902_imsgenerate\mergedProjects (output folder)
Create New Server Directories
New server directories need to be created in two locations for holding the output files.
One is for the Robohelp output that gets put in the nightly .war file and checked into Perforce.
The other is in the wwwroot of our IIS server for our doc web site.
They are defined as follows:
\\docsql01\Documentation\RoboHelp\9.0.3\imsgenerate
\\docsql01\Inetpub\wwwroot\help_sys\9.0.3
Create new directories with the correct branch number.
Using RoboSource View Manager to Create a Branch
You use the View Manager to create a new branch. In RoboSource 3.1, a branch is just a different type of view.
Assume the version_903 branch has already been created. To create a new branch, click the Create button and name the new branch (version_910), leaving a blank root folder.
Click on Set Root to define the root folder for the new branch.
Select the root for the branch and click OK.
Select the view (branch) and click Properties. In the Properties window, select Branch as the Type, then click Close.
In the View Manager, check the check box to enable the view.
Setting the Local Path for the New Branch
Select the new branch and right-click.
Type in or browse to the correct local path, check the Apply Recursively box, click Apply. Close the Properties window.
Editing .xpj Files
The .xpj files in the new branch need to be edited to point to the new branch. THIS IS VERY IMPORTANT. IF NOT DONE ROBOHELP WILL CHECK IN CHANGES TO BOTH THE BRANCH AND THE ROOT.
One line in each project’s .xpj needs to change. See below.
This value must match the branch the project lives in. In our above new branch example this would be changes to %version_910.
In a merged project, you can change all these at once with the FAR tool.
Edit the .ssl and .sss files
These files need to be edited to redefine the generating and publishing paths. Note that this can also be accomplished with the FAR tool, or by having each writer do it through the GUI.
ssl Files
The .ssl files contain the data for the generate path. Although there might be seven .ssl files for each project, you only need to edit the ones for your Primary Layout and one or two others that you might also use.
Make sure the generate path is defined correctly.
sss Files
The .sss file defines the publishing paths. This edit can also be done through the GUI if necessary.
====================================
Forward and Back Patching in RoboSource
This document describes the procedure of forward or back patching files (.htm or .gif) between branches in the RoboSource system. The RoboSource product uses a feature called Reconcile Changes to accomplish patching between branches.
Example Scenario
Throughout this document we will use a real life example from the refwindows project.
We have edited the version 9.0.3 security_master_folder.htm file in RoboHelp.
Now, we need to backpatch it to version 9.0.2.
Selecting Folders or Files to Reconcile
You can select either:
A single file for reconciliation
The source folder, or
The destination folder
If you have just one file to reconcile, you will probably want to use the single file method. If you have several files to reconcile, you will need to use the folder method.
Working from the Source Folder
Select the source folder (folder that contains the updated file) in source control. In our case, %version_903/refwindows.
Select Reconcile Changes … from the Action menu. This opens the Reconcile window.
Select the appropriate option in the Reconcile window.
In our example we select the first option to reconcile from %version_903 because that is where our updated file is. Make sure the correct project is selected in the drop-down list. ($/version_902/refwindows).
Other Options
Reconcile changes made in another branch *into %verison_903/refwindows. This is the option you would use if you have an updated file in another branch that you want to put in 903.
Reconcile changes made locally (in c:\903_imsmerge\projects\refwindows) and %version_903/refwindows. We would most likely never use this option.
Reconcile changes made in another database *into* this database. Do not use.
None of the above, let me select what to Reconcile. This one sounds like it would be a good option, but it gets even more complicated.
Wildcard Filter. Use this to display only certain file types. For example, *.htm;*.gif;*.jpg would filter on those file types.
Click OK to open the Difference Reconciliator window.
Notice that this window shows all files in the project that have differences such as the .ssl and .xpj files.
IMPORTANT: NEVER reconcile these files, they are supposed to be different.
You can prevent these files from displaying by using the Wildcard Filter discussed above.
Select the appropriate file (security_master_folder.htm). This window will allow you to replace the file in the version_902 project unfortunately, it will also allow you to replace the updated file with the older one. Be Careful Here.
You can also View Differences from this window by clicking the View Differences link.
Click the Replace button in the $/version_902 pane.
You will get a confirmation dialog. Before clicking OK, take the time to read the question. This is your opportunity to catch potential mistakes!
You will then get the Reconcile Checkout dialog.
Be sure Perform the action directly on the Server is checked, click OK.
You see that the Difference Reconciliator window now indicates No changes to merge from %version_903/rewindows/security_master_folder.htm in the $version_902 pane.
Close the window.
Check the Destination Folder
In the source control window go to the destination branch and check the project. You can see in this shot that the security_master_folder.htm file now shows the date it was replaced, and that the server version is now different from your local version.
Working from the Destination Folder
If you had chosen the destination folder and select Reconcile Changes, the same window would have opened but with different options.
Here you would have selected the second option to reconcile into $/version_902.
You can do it either way, just pay careful attention to the options. The rest of the process is the same.

View multiple versions of content concurrently

Similar Messages

Maybe you are looking for