View not visible error

Dear Experts,
the situation is as follows:
I have a windows which contains four views. One is the main view and the other three views will
be called if a button is clicked.
the In and Outbound Plugs are connected like this:
Main -> outbound Plug1 Main view -> Inbound Plug show view -> show view
Main -> outbound Plug2 Main view -> Inbound Plug change view -> change view
Main -> outbound Plug3 Main View -> Inbound Plug create view -> create view
show view -> outbound Plug show view -> inbound plug main view1 -> main view
change view -> outbound Plug change view -> inbound plug main view2 -> main view
create view -> outbound Plug create view -> inbound plug main view3 -> main view
Problem is as follows:
i enter data in the main view and navigate to show view -> no Problem.
then i navigate back with a button to main view -> no Problem.
then i navigate to change view -> no Problem.
but when i then want to navigate back to main i get the following error message:
The view show of the component z_net_cats_multi is not visible. Navigation is not possible.
How can i make the view visible so i can navigate back.
Thanks for help and best regards
René

Dear Rene,
Please check the outbound plug of change view is properli  linked to the inbound plug of Main view.
Check for the chain symbol between outbound plug of change view and inbound plug of main view.
Also check the action event of button in change view which you call for navigation to main view.

Similar Messages

  • Execution view not visible

    Hi,
    I am using the full IO example for labview in test stand examples. I haave made some modification to suit my application. When I run this main vi everything appears properly. the execution view is visible and shows the trace of the testing. When I launch this VI from another VI using the invoke node through the RUN VI method, the execution view and the report view are not visible.
    Where could be the error?
    Regards
    Gopal

    Hi Gopal,
    I ran your VI (I simply modifed the Open VI Reference Path to point to my unmodified Full OI:  C:\Program Files\National Instruments\TestStand 3.5\OperatorInterfaces\User\Full-Featured\LabVIEW\TestExec.llb\Full OI - Top-Level VI.vi) and the execution view appeared fine.  Please try this with an unmodified version of the OI.  Assuming you get the same result, you may want to compare the differences and/or make your changes incrementally from the original version.
    Here are the execution views after I launch the OI with your VI: 
    Message Edited by AEDavid on 05-10-2007 05:04 PM
    Cheers,
    David Goldberg
    National Instruments
    Software R&D
    Attachments:
    execution.JPG ‏88 KB
    executionafter.JPG ‏80 KB

  • Table or view not exists error from procedure - occurs randomly

    I have a procedure used in a website, it works fine until recently we occationaly getting an error said Table or View not exists, the error will go away if refresh the page which will re-execute the procedure.
    This procedure uses an table object as temp table and just a select statement form several tables. The table object is used in other procedures as well. I can't find out what cause this error because it's not always repeatable and the error message didn't give out the exact table that cause the error.
    Any idea what might cause this or how to trace the reason that cause the error?
    We don't have a good DBA here so really need some help, any advice are welcome.
    Cheers

    I don't think it's possible that any previlege changes are made or the tables in used in the procedure are droped because after we run our db scripts to build the db, then we testing the website which can only execute procedures, and no procedures execute DDL script to make such changes.
    It's worth to mention that we have a Table Type called EntityIDTable() which is used in many of our other procedures, but I think table type is initialise as local variable in each procedure so shouldn't conflict to each other, am I right? Also, the same script are running several times a day to generate same db but with different schema names so we can test on different site templates. One change script did drop one of the table and recreate it, but it use the &DB_Schema_Name.Tablename to drop a table so shouldn't affect the table in other schema I think. (I enclosed the procedure below)
    Also, any event log in Oracle I can enabled and trace the problem to find out what table is not exists at that point that this problem occurs?
    Cheers
    Below is the sample code of the procedure:
    aEntityIDSet varchar2,
    aCount out int
    as
    L_KeyID Category.CategoryID%type:=null;
    l_strEntityIDSet varchar2(255);
    l_strPipeSepValsInput varchar2(255);
    l_UserEntityID varchar2(255);
    l_EndPointInput int;
    l_Strlength integer;
    l_UserKey NUMBER;
    l_UserOriginalKey NUMBER;
    l_RREntityData ENTITYIDTABLE:= ENTITYIDTABLE(); /*creating on object from a table type to store entity values in*/
    -- end of Local variables used for Category Security
    begin
    -- Category Security
    -- Split up the EntityIDSet
    l_strEntityIDSet:= aEntityIDSet;
    l_strPipeSepValsInput:= l_strEntityIDSet || '|';
    l_EndPointInput:= instr(l_strPipeSepValsInput,'|',1,1);
    l_UserEntityID:= SUBSTR(l_strPipeSepValsInput, 1, l_EndPointInput - 1);
    l_UserKey:= To_Number(l_UserEntityID);
    l_UserOriginalKey:=l_UserKey;
    l_strPipeSepValsInput:= SUBSTR(l_strPipeSepValsInput,l_EndPointInput+1);
    l_Strlength:=LENGTH(l_strPipeSepValsInput);
    While ( l_Strlength > 0) loop
    <<get_entityId>>
    l_EndPointInput:= instr(l_strPipeSepValsInput,'|',1,1);
    l_UserEntityID:= SUBSTR(l_strPipeSepValsInput, 1, l_EndPointInput - 1);
    l_UserKey:= To_Number(l_UserEntityID);
    l_RREntityData.extend;
    l_RREntityData(l_RREntityData.COUNT):= Entityidtype(l_UserKey);
    l_strPipeSepValsInput:= SUBSTR(l_strPipeSepValsInput,l_EndPointInput+1);
    l_Strlength:=LENGTH(l_strPipeSepValsInput);
    end loop get_entityId;
    -- the block above used in many other procedures to get the entityID
    select Count(Distinct ri.ID) into aCount From
    -- here joint to other 6 tables
    -- the inner join below use the ENTITYIDTABLE
    inner join
    (SELECT distinct KC.KnowledgeGeneID FROM Category Cat
         inner join KnowledgeGeneCategory KC on KC.CategoryID=Cat.CategoryID
         where EXISTS (SELECT EntityID FROM TABLE(cast (l_RREntityData as ENTITYIDTABLE)) ET
         INNER JOIN (SELECT EntityID, EntityTypeID, CategoryID FROM CategoryRowLevelSecurity CRLS
         WHERE CRLS.EntityTypeID=1) S ON ET.USERENTITYKEY=S.EntityID
         where S.CategoryID=Cat.CategoryID
         UNION
    SELECT EntityID FROM CategoryRowLevelSecurity CRLS
         WHERE EntityID=l_UserOriginalKey
         AND EntityTypeID=0
         AND CRLS.CategoryID=Cat.CategoryID)
         OR NOT EXISTS (SELECT CategoryID FROM CategoryRowLevelSecurity CRLS
         WHERE CRLS.CategoryID=Cat.CategoryID)
    ) CS ON CS.KnowledgeGeneID = k.KGID
    where ri.ProcessID = riPro.ProcessID)
    end QueryNotifications;

  • Custom View not visible in Overview page as AB unless "Reset to Default"

    Hi Experts,
    I am facing a strange issue here.
    I enhanced the component TPMOE and created a custom view ZTRADESPENDEXCEPTION in it.
    Now i have added this view as assignment block in all 6 configuration available for the overview page.
    I have redefined the DETACH_STATIC_OVW_VIEWS and REATTACH_STATIC_OVW_VIEWS.
    The issue i am facing is that my view assignment block is not visible to the user unless he/she goes to the personalization of the overview page and hits "Reset to Default". Once this is done, later on users can change there personalizations and everything works fine.
    Now i am not sure i can go and tell all end users to go to personalization of the TPMOE overview page and click on "Reset to Default".
    Is there any other way i can show my view to the end users?
    I have done this on the lines of overview page layout changing when you select product planning basis while creating Trade Promotions.
    Thanks and Regards
    Gaurav Kumar Raghav

    Hi Amar,
    My coding is given below.
    In DETACH_STATIC_OVW_VIEWS, the coding is:
    Call Super Method
    ls_viewid-view_id = '<My View Name>'.
    Append ls_viewid to rt_view_id
    In REATTACH_STATIC_OVW_VIEWS, the coding is:
    Call Super Method
    if <flag>  = 'X'.
    ls_viewid-view_id = '<My View Name>'.
    Append ls_viewid to rt_return.
    endif.
    In debug mode, the coding get executed correctly and my view is returned for attachement.
    For each user, the first time, i need to say "Reset to Default".
    After that it works fine, my view is displayed.
    Is the program "BSP_DLC_DELETE_PERSONALIZATION"  a good solution to my problem?
    Thanks and Regards
    Gaurav Kumar Raghav

  • View not visible

    Hi Gurus,
    I have a requirement wherein i have to use component BP_DATA/IDNumberWindow in the component ICCMP_BP_DETAIL. Here are the steps I followed:
    1. Add a component usage for   BP_DATA/IDNumberWindow in component ICCMP_BP_DETAIL.
    2.Assigned this to VS BuPaMoreCustomerVS  after creating a new view area.
    3.Redefined the component controller's WD_USAGE_METHOD to do context node binding.
    4.Redefine the htm page of viewset to display the embedded view.
    5.Redefined the set_context_viewgroup method of view embedded.
    But when I go to UI this view is not visible. Please help.
    Thanks.

    Hi.
    in component ICCMP_BP_DETAIL component CreateW window is the default window which does not hv viewset View ICCMP_BP_DETAIL/BuPaMoreCustomerVS .
    Ensure  that when chking in UI either MoreWindow is being diplayed or else add ur view to   viewset ICCMP_BP_DETAIL/BuPaCreateVS .
    Rgds,
    Swati.

  • Views not visible

    Hi,
    We created a Procurement Catalog and created views under it, defined the integrated call structure and also assigned views to roles.
    But despite that when we click on the Procurement Catalog we are unable to view the "View".
    System details.
    CCM 2.0
    SRM 5.0
    EBP 5.5
    Kindly reply at the earliest.
    Thanks,
    Swetha

    Vishal,
    Are you able to crack the issue, as even we are not able to see the view defined in our Master Catalog?
    Views have been correctly defined with proper assignment to roles.
    They are very much active with assigned items and the master catalog has also been republished. But still views are not visible while creating shopping cart from Catalog.
    We are working on SRM 5.5 and SP pack level 9.
    Regards,
    Sandeep

  • Infopath2013 button in secondary view not visible on form in SharePoint online

    We have a SharePoint list that has gotten its Form with Infopath.
    The infopathform has 2 views:
    Userview and Fullview.
    The Userview has some fields and a submit button and is activated when adding a new item in the list.
    The Fullview is active when opening a list item. The open form will not show the additional button that resides in the Fullview.
    Any ideas how to get the button to show?
    brgs
    Bjørn

    Hi,
    Could you please explain about "additional button"? Do you mean other list fields or "Save"/"Cancel" button?
    If you mean list fields, you could manually drag them to this view from Fields.
    If you mean "Save"/"Cancel" button, by default, there are some ribbons under Edit Tab as below:
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • 10.9.2 mail viewer not visible & won't quit?

    Getting really frustrated now. I love my imac, it has always worked swiftly & flawlessly. I recently upgraded the OS from 10.6 to this new mavericks 10.9.2. All seems to have gone fine except mail. When i first opened mail i spent a few minutes changing the display back to the classic view i am used to. It all seemed to be fine. I think i made it full screen at one point (and this does something with spaces...a new desktop or something)? Anyway, now mail is lit up in the dock but i can't view the window anywhere, nor can i quit mail?  What i have found is in the top right corner of screen there is an icon that looks like 3 i's on there side. This brings up the messages down the right hand side of the screen, and i can click on those which opens that one mail in a new window. What i want though is the whole mail with all my messages displayed in date order? Any ideas guys n gals please?

    Is an external display connected and turned off? If not, open Mission Control. Do you see the window(s) in any other spaces?

  • TS2537 Mail Viewer not visible, Mail can't be quit - OS X 10.9.1

    Experiencing this issue - http://support.apple.com/kb/TS2537 - on two different (new) MacBook pros, Mac OS X 10.9.1.  Must force quit and restart.  Anyone else?

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • MAPVIEWER RECEIVING ORA-00942 Table or View does not exist ERROR

    I've created a new 10g instance that will store spatial data almost exclusively. SDO Version 10.1.0.2.0. Using an ESRI product (shp2sde), I have inserted a shape file into the database so that it will accessible through ArcSDE or Oracle Spatial, then created the spatial index. The information appears correct in the USER_SDO_GEOM_METADATA table. The spatial layers are accessible via all ESRI products but when I use our Mapviewer JSP application, it encounters an ORA-00942 Table or View Not Found error. The same procedures to insert data were used in a 9i database and a previous 10g database (built from the same CDs as this instance) without a problem. It looks like there is a permissions problem but cannot put my finger on it. The table is owned by a user AREAOFINTEREST and the Mapviewer datasource is connecting as AREAOFINTEREST.

    What are the datasource and theme definitions in your jsp?
    Could you also post the full error stack that should be in the mapviewer log file.
    Jayant

  • Public method not visible

    I'm new to Java and am having trouble with a "method not visible" error when trying to use a package by another person (which works in its own context.) As far as I can tell all the relevant classes and methods should be public and accessible.
    Here is the basic form of the code I'm trying to make use of:
    package org.p2c2e.zag;
    public final class Zag {
         public void start() {
    }And here is my stripped down code. The z.start() line produces the error message "The method start() from the type Zag is not visible."
    import org.p2c2e.zag.*;
    public class BasicTest {
      public static boolean simpleOpen(File fi) {
         Zag z = new Zag(fi, iStart);
         z.start();
    }The Zag class and the start() method within it are both public. Am I missing a general concept here or is something up with the rest of the code?
    Thanks in advance,
    --Aaron                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Based on what you've posted, the only thing I can think of is that you've got an older version of Zag in which start() was not public. Might be a classpath issue, might just be that you didn't recompile Zag.

  • BPM worklist app views are not visible in IPM task viewer

    Hi,
    we upgraded our system from 11.1.1.3.0 to
    weblogic 10.3.5.0
    SOA 11.1.1.5.0 with BPEL processes
    ECM with IPM and UCM 11.1.1.5.0
    after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
    Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
    Thanks a lot in advance for any help
    Edited by: 914063 on Jun 20, 2012 12:56 PM
    Edited by: 914063 on Jun 20, 2012 12:57 PM

    Hi Renuka,
    There are basically two ways to create an ADF UI for a BPM Task:
    1. Generate it from the task
    2. Create a ADF Taskflow based on Human Workflow Task
    Since I tell this by heart, I might be slightly wrong in the terms.
    You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
    Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
    Regards,
    Martien

  • Flight_search view's UI element are not visible

    Hi Experts,
    UI Elements in the view Flight_search of component FITP_FLIGHT  is not visible. when i click the layout of flight_search view it shows an message Export puffer not sufficient.preview deactivated. -> Note 965337
    Any body could tell why  this error is occured and how to rectify.
    Edited by: Ramanan Panchabakesan on Sep 7, 2008 10:18 AM
    Edited by: Ramanan Panchabakesan on Sep 7, 2008 12:04 PM

    hi,
    i am facing the same problem, when i click on view layout, it is not visible, and same message is coming to me that export puffer not sufficient, preview deactivated, note -> 965337.
    Yogesh N

  • View of Component Is Not Visible.

    Hi all,
        I am new to the wbe dynpro. I have an issue.
    I am using ALV to Display the selected data. Its displaying Correctly in alv table i have made one field to be link which will navigate to another view.
    When i click the link i am getting the following error View of Component Is Not Visible.Navigation Is Not Possible
    can any help me to resolve this problem.
    Thanks in Advance,

    Hi Kedar,
    In view1 i have created a container i am embeded the view in tat container its displaying correctly..
    In tat view2 iam having the ALV table in this i have link and if i press this link it should navigate to view3.
    Thanks in Advance.

  • Thumbnails not visible in Library Grid View

    In LR 1.0 on Mac OS X, after converting from Beta 4.1, my thumbnail images are not visible in the Library Grid View, except for just a brief moment when I first click on a Folder (Shoot) name. The images then disappear, leaving just the background.
    Double clicking on an image background brings up the image correctly in Loupe View.
    Did I miss something in the conversion?
    Many thanks!
    (Mac OS X 10.4.8, Dual 2 GHz PowerPC G5, 6.5 RAM)

    Hello,
    I have a similar problem, (windows xp)
    Besides the thumbnails not being visible, when I open LR 1.0, it shows my folder structure as imported, with the number of files per folder, but right after that, the folder names start to gray out, and the number of pictures in each folder goes to "0" . The pictures are still there.
    For each keyword it shows 0 pictures, until I click on that keyword, then it shows the number of pictures for that keyword.
    I did uninstall 4.1, and deleted the database, I don't know if this is related to some left over Beta 4.1 somewhere in there.( my old identity plate still shows) I had no issues, other than being slow when using beta 4.1, I had only imported pictures on a as needed basis( in 4.1), and not the whole folder structure. ( as I want to do with LR 1.0 )
    Any solutions ? ( other than uninstall and trying to to a better job of cleaning up, before re installing ? )
    P.S. about 1000 files ( jpg,tiff,psd) did not get imported due to errors, but most of them were in my 4.1 library with no problems.
    P.S 2 the keywords were entered either in bridge or ID imager, and written back to the files, I never used beta 4.1 to enter keywords, just used it to search them.
    P.S 3 ( sorry this is getting too long...) it crashed on import 5 times, about 20,000 files, internal HD just for pics.
    thank you,
    Fabio Ventura

Maybe you are looking for