View open references

Hi,
Are there any NI or third party tools that show open application, vi, control, etc. references? There are a few times when I forget to close a reference and my built application will not close but debugging is painful sometimes.
Thanks!

Why you want to close reference by your self.
The best way, close it programmatically.
Open reference--- > Do your Work ---- > Close reference.
If you want display all programs like Task Manager then use this link.
https://decibel.ni.com/content/docs/DOC-25652
Munna

Similar Messages

How to create table view with reference table

Hi experts,
How to create table view with reference table in SE11, plz gve me stp by stp procedure.
pints grnded for hlp.

Hi
Go to Tcode se11 choose view and enter the name and create a popup opens up choose database view option
enter the description
On the left hand side choose the table name.
Click on view fields tab and choose your table fields.Here you can choose which fields you want in your view.
Save and then activate.
Hope this helps.
Regards,
Harish

We want to view header reference as column data wonu2019t appear in any Refaren

Dear Experts,
we want to view header reference as column data wonu2019t appear in any of the reference filed.
Please tell me the soluation How can I give the soluation bilow issue.
Currently user are facing one problem with respect of Line item report.
In any of the line item report (i.e. FBL1N, FBL3N, FBL5N) we want to view header reference as column data wonu2019t appear in any of the reference filed.
For Example in Bank G/L Cheque number was enter in reference field but same is not apear
In Sales G/L or tax G/L invoice number is to be appear which is again invoice number as reference in document.
Regards
Devendra.
Moderator: Please, search SDN before posting

Hi,
To add Reference field in line item report do below.
From FBL1N output screen.
Click change layout / (clr + F8)
Now add Hidden field u2018Referenceu201D to column content and push copy button.
Now you should be able to view reference field (BKPF- XBLNR) in line item report.
Best Regards,
Raju

Upgraded to adobe reader XI now cant view/open online documents pdfs etc.

upgraded to adobe reader XI now cant view/open online documents pdfs etc. even when i save them they wont open after downloading. can save them to documents and open them from document file.

Similar problem; but how can I resume opening pdf’s in IE while maintaining the protection benefits of Protected Mode by keeping it enabled (I have not tried disabling it)?
Need help resolving newly discovered problem wherein all of sudden I can no longer open and display pdf files within IE and but end up with a blank screen [shows blue loading gauge 55.8kb/55.8kb for example doc] unless I down load the pdf file and then open it using Reader XI ver 11.0.2 [Plug-Ins 11.0.01.36] which opens the files just fine. Eventual Error Msg = “There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try attain (103:103)”. Reader Protected Mode: Reader cannot open in Protected Mode due to an incompatibility with you sys config. Etc. “Do not open with Protected Mode disabled” is selected.
IE = ver 8.0.6001.18702) on Windows XP = ver 5.1 SP3.
Reader XI ver 11.0.2 [Plug-Ins 11.0.01.36]
Reader XI, Check for Updates shows: No Updates Available
Example of failing doc = http://www.us-cert.gov/reading_room/emailscams_0905.pdf

EXE I built unable to open reference to VI with MathScript Node in it

Hi Everyone,
First off, I'm using Labview 8.5 on Windows XP.
I have two VIs. One called "Main Instance.vi" and the other is called "code.vi". The Main Instance vi is very simple. It opens a reference to code.vi. Using this reference, it dynamically calls code.vi using the "Call by Reference" node.
The code.vi is also fairly simple. On this VI's connector pane, I have two inputs "a" and "b" and one output "c". All are of double data type. These controls are wired to a MathScript Node where the code inside is simply:
c = a + b;
So the idea here is that I am using the Main Instance VI to dynamically call and pass two numbers to code.vi. code.vi adds these two numbers via MathScript and returns the answer back to the Main Instance VI.
This all works fine and dandy within LabView. However, when I build Main Instance.VI as an application, I am no longer able to open a reference to my code.vi because it has a MathScript Node in it. I put error indicators on the front panel of Main Instance VI to monitor the Open reference and Call by Refernce nodes. As VIs running in Labview, I get no errors and everything works fine ("a" and "b" are added and "c" is the correct answer). When Main Instance is an exe I get errors 1003 for the open reference function.
I have attached screenshots of the Vis as well as the VIs themselves.
Any guidance is appreciated. Keep in mind that I have to use Labview 8.5 as this is just an example of a bigger problem that is occuring in our software while developing a solution for a customer. Right now our software is compiled in Labview 8.5.
Attachments:
Main Instance.vi ‏15 KB
code.vi ‏30 KB

Hello,
As you may know, MathScript is implemented on top of LabVIEW. Consequently, there are various VIs and controls from LabVIEW's vi.lib directory that are needed for a MathScript VI to run. A built application can run on a computer that does not have LabVIEW installed. The LabVIEW Run-Time Engine provides support for LabVIEW's primitives, but any functionality implemented in a VI must be included in the built application. Otherwise, the application cannot find those support VIs.
Basically, the problem is that in trying to run your MathScript VI, you are only giving the application the top-level VI and none of the subVIs. A way that will likely work around this is to build a source distribution with your MathScript VI. Create a project with your VI in it. Create a new source distribution build specification in the normal manner. (I don't have LabVIEW 8.5 installed at the moment, but these are instructions for 8.6) In the "Additional Exclusions" section, uncheck the "Exclude files from vi.lib" setting. This should pull in all the subVIs you need to run the VI. Then, open your top-level VI from your built application.
Grant M.
Staff Software Engineer | LabVIEW Math & Signal Processing | National Instruments

FPGA error when opening reference

I am running the 8.6 and all the latest versions of the software on a cRIO device. In my RT code i am opening a reference to an FPGA file and when I do it times out with this error:
error code: -63192
in Host CRIO Kyle.vi in Host CRIO Kyle.vi<append>
FPGA activities:
Reference open through FPGA interface. in Host CRIO Kyle.vi in Host CRIO Kyle.vi
There seems to be no explanation of this error on the NI website and I need help figuring out why the error might be occuring.
[will work for kudos]
Solved!
Go to Solution.
Attachments:
open reference error.GIF ‏6 KB

Hi rex,
Looks like you're working with Rob Klein on this issue. I looked through the French discussion forum and saw that they don't actually ever answer their customer's question. It seems the customer gave up writing back about it. Please don't give up on your issue and keep Rob updated on your progress. When we come to a solution, we'd like to post that solution on the discussion forum so that others can benefit from it, too. It's nice to get that information at a click, right?!
Rob already mentioned the previous issue about improper addressing. There was another issue with this error that was solved by changing the resource name to IP Address:RIO0 instead of just RIO0. If you want to try to enlist more support from the online community, I would recommend sharing more information about your application, including screenshots of your setup and the error you're getting. I hope we can see this issue through to its solution.
Regards,
Dan Richards
Certified LabVIEW Developer

View controller reference

Hi
How do I obtain the view controller reference of a different view to the one I'm in?
For example, My window is made of of two views, MAIN and DETAILS. I wish to check the mandatory fields in MAIN and DETAILS from a method on the component controller.
Therefore, how would I obtain the references? Do I need to set up attributes on the component controller and then populate them in the WDDOINIT of each view?
Cheers
Ian

Hi Ian,
Create a component controller method check_mandatory_fields
The following should the parameter interface of the method.
I_VIEW_CONTROLLER     Importing     Type ref to IF_WD_VIEW_CONTROLLER
In this method, call cl_wd_dynamic_tool=>check_mandatory_attr_on_view to do the validation.
In main view, when you want to validate the records, do the following.
DATA: lo_view_controller TYPE REF TO if_wd_view_controller.
lo_view_controller ?= wd_this->wd_get_api( ).
wd_comp_controller->check_mandatory_fields(
    EXPORTING
      i_view_controller = lo_view_controller ).
These validation can be done at view level. So in detaild view, when you want to validate do the same as mentioned above.
Regards,
Sravan varagani

I have a VI A. I want A to call another VI B and execute. After B executes, I want it to close automatically and go back to A. Is this possible ? I tried using open reference and those methods, but I am not able to do it. Can someone help me ? Thanks !

Thanks !
Kudos always welcome for helpful posts

Re: I have a VI A. I want A to call another VI B and execute. After B executes, I want it to close automatically and go back to A. Is this possible ? I tried using open reference and those methods, but I am not able to do it. Can someone help me ? Thanks !Hi Stephan ! Thanks ! I guess I explained my question not so right. I've created a customized menu and at the instance of me selecting a menu, a VI should load itself dynamically. I am using call by reference. Sometimes it works and sometimes it won't. In short, what I want to achieve is load VIs dynamically and close them dynamically once they finish executing. Thanks !
Kudos always welcome for helpful posts

View open qty and manually close SO

Hi,
Example : I have SO with qty 10pcs, but only 3pcs are delivered, the remaining 7pcs are yet to be delivered. Hence, this SO is still open. The thing now is that I want to see the open qty and manually close the SO.
I tried with VA05 but it doesn't show the open qty. What transaction to view the open qty? How to manually close an open SO? Is there a button or checkbox that I can just click on it to close the SO?
Thanks.
Edited by: Wooi Ling Ng on Feb 14, 2008 2:56 PM

Hi,
As said that you want to close the sales order for 7 qty of total 10 qty.
When do the following.
Goto the sales order created, goto the line item eg 10 scroll towards right side of the screen to find the field " Reason for Rejection" assign the relavent message why you want to close the order for remaining quantity.
If you have many line items you can reject the undeliveried line items if you want them not to delivery.
Kindly Reward points if usefull.
Regards
vK

Reg : Viewing Opening and Closing remarks in the document

Dear All,
In any document (Sales Quotation, Sales order etc), while right click we can see Opening and Closing Remarks. I have entered Opening and closing remarks. But am not able view in the screen. Where i can view the same in the respective document.
Please do the needful
Thanks & regards
Venkatesh N

Hi,
You can check Note No. : 1038129 and 1289493 regarding the question asked by you.
Kind Regards,
Jitin
SAP Business One Forum Team

Bank statement will not view/open. can view pages of bank web site fine

i am logged into one of my bank web sites... trying to view recent statement. i click their "view" button.. and nothing happens.
I'm able to view statements in all of our other bank web sites.
I called the bank.. they tested on their end. when logged in as me they are able to view statement. they suggested it may be my browser.
thank you

One option might be to change the way PDFs are opened from opening in a tab to launching outside the browser in Adobe Reader or Adobe Acrobat. To change this setting:
Tools menu > Options > Applications 
(''If necessary, tap the Alt key to display the classic menu bar so you can access the Tools menu'')
In the search box, type '''pdf''' and pause while Firefox filters the list. Use the drop-down on the right to change the action, for example, to Always Ask which presents the Open/Save/Cancel dialog.

Open reference / output in the same window

I want a vi (opened and started at runtime per reference) to display
its data on the frontpanel of the calling VI. How can this be done?
Thanks,
Andre

THis can be done using control references.
Pop-up on the control you want the sub-VI to update. Create a reference to the control. Pass this reference to the called sub-VI when it is called (via its connector pane).
Inside the sub-VI, use a property node>>>value to update the indicator when required.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Viewing Open PO's

Hi Gurus,
How to view the list of Open "PURCHASE ORDERS"(which are not moved for billing)?
Is there any Standard Transaction code for this?

Hi,
Go to ME2N, select Selection Parameters - RECHNUNG.
It will give you the list of all open POs for which you have not posted invoices.
Regds,
CB

List View : Opening folder in folder changes modified date in list view

Since my office upgraded me to 10.5.4, when I flip open a folder in List View, then flip open a sub-folder, the modified date in the original folder changes to now. Opening subsequent folders again changes the modified date of the folder above it. I do not remember this happening in Tiger, and since part of my job involves finding and archiving old files, this is driving me crazy. Can I stop it?
Jeff Work

That's interesting, and probably why the original poster had the same issue, but it does not work that way for me with Leopard 10.5.5.
In list view, the .DS_Store does not get updated when I flip down the folder. The .DS_Store file only gets updated if I open the folder in icon view. That makes sense because the .DS_Store file stores the relative position of the icons in the window.
However, when I go back to list view, even though the .DS_Store file is updated to the current data and time, the Date Modified of the parent folder does not change.
This different may be caused by some setting you are using in Finder that most people do not use, or maybe because of some other Mac OS X feature such as File Vault (which I do not use), or maybe some third party software that modifies Finder functionality. I don't know...

Open references of other list items from a list item in the same window or tab

Hi there,
We have migrated from lotus notes to sharepoint. We have converted the lotus notes forms to sharepoint forms. Basically the list items are pages and there are links of other pages in a page.
My problem is I want to open the other pages in the same tab or window and not in a separate window.(currently the links open in a separate window which is not the requirement.)
In terms of sharepoint I would say,
I have references(links) to other list items of the list in a single list item. I want to open the other list items in the same window (tab).
How can we achieve this?? If possible without much codes??
Please suggest.
Any help will be highly appreciated.
Thanks in advance

See:
*http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
For links opened via JavaScript you can look at this pref:
*http://kb.mozillazine.org/browser.link.open_newwindow.restriction
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

View open references

Similar Messages

Maybe you are looking for