View read allows read only access

Hi friends,
I have created maintainance view, I am getting this warning " View read allows read only access , Maintainance not possible". So to avoid this, what should i do now.
Thank you

Hi,
In Delivery and maintence check if the field Data Browser/Table View Maint. has the value delivery and maint allowed
or delivery and maint allowed with restrictions.
Regards,
Rajesh Kumar

Similar Messages

Avoid read-only access at physical standby

Hi!
DB=11.2.0.2
when I start the standby with
SQL> startup
the db is open read-only.
Is there a way to configure the db so that startup command only mounts the db and start redo apply?
this is the config:
DGMGRL> show configuration verbose;
Configuration - w
Protection Mode: MaxPerformance
Databases:
w_01 - Primary database
w_02 - (*) Physical standby database
(*) Fast-Start Failover target
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '30'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: ENABLED
Threshold: 30 seconds
Target: w_02
Observer: ora
Lag Limit: 30 seconds
Shutdown Primary: TRUE
Auto-reinstate: TRUE
Configuration Status:
SUCCESS
DGMGRL> show database w_02
Database - w_02
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds
Apply Lag: 0 seconds
Real Time Query: OFF
Instance(s):
w
Database Status:
SUCCESS
br
Daniel

If Data Guard is setup correctly the application is not losing data, you cannot read from it, but it will apply logs:
Ex.
/home/oracle:STANDBY >sqlplus "/ as sysdba"
SQL> select * from BIGSHOW.CUSTOMER;
select * from BIGSHOW.CUSTOMER
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
So even as the SYS user I cannot read from my test user's tables.
ORA-01219 is expected when the standby is in this state.
You can open READ ONLY if you have Active Data Guard, but generally that will cost you extra.
OR, you can do thing to check your data:
To open a standby database for read-only access when it is currently performing managed recovery:
Cancel log apply services:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
Open the database for read-only access:
SQL> ALTER DATABASE OPEN READ ONLY;
At some point you have start the recovery again, you probably don't have an issue.
If you want more peace of mind on this you have to setup a test Data Guard system and bang on it.
Best Regards
mseberg

My Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated. also how do i now turn off the apps running in the background that are draining my battery?

my Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated. also how do i now turn off the apps running in the background that are draining my battery?

hey i m working on my illustrator and i m having many problems with my swatches
for example i use the green phosphorique i don't get this color i get another green
and many colors too it's like illustrator chooses for you the only green color
so please i kind of need help i can show you pictures of that i print screen viewed them.. so anybody who can help... pleaaaaaaaaaase contact me because i m having a project now..
my e mail is [email protected] i would be thankful
i even tried to download the illustrator on my friend's computer also i m having this problem ....

Read Only Access to Storage Container

Is it possible to give Read Only access to a particular storage container without adding someone to Subscription and providing them the access key without anonymous request without going through SAS route

By default, a container and any blobs within it may be accessed only by the owner of the storage account. If you want to give anonymous users read permissions to a container and its blobs, you can set the container permissions to allow public access. Anonymous
users can read blobs within a publicly accessible container without authenticating the request.
This link gives full details
https://msdn.microsoft.com/en-us/library/azure/dd179354.aspx
Frank

Read Only access to UCCX server

Hi,
I would like to know if it was possible to create an account for Read Only access for server in UCCX 8.02.
Saima

Saima,
Unfortunately no it is not, you have either Admin access or supervisor access. The admin access has full access and supervisor access allows configuration of the RM subsystem either foe own team or all teams.
HTH,
Chris

How to configure Mailbox Read-Only access for Mailbox's owner on Exchange Server 2010?

I have to configure the Exchange Server 2010's mailbox to only grant Read-Only Access on the mailbox's owners. So they can only allowed to read their messages and cannot modify or remove them. Are there any references or methods to do?

Hi,alexchy8
We can make use of 2 PowerShell commands to achieve this goal.
Add-MailboxPermission and Add-MailboxFolderPermission.
Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
You can read the following article as reference:
http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards.

XCM(Extended Configuration Management) Read Only Access for Webshop

Hi,
We dont hav e XCM admin access in our project.We need to have just the view(read only) access.This will help us immensly during any troubleshooting. Plus we will save a lot of time while troubleshooting if the view access is avaialable to us. In case of any issues in the XCM setting, we can easily pin point the issue and ask the ERP team to change it. In absence of it we can only speculate what could have gone wrong on the XCM side. Is there any role in XCM so that we can get just read only access.
Regards

Hi,
The below note will help you.
Note 1014383 - Read only user in the XCM and Administration area of ISA
Regards,
Shanto Aloor

Read-only access (hide a portion of the config)

Is there a way to alloww read-only access to only a portion of the config. I have customers who are requesting read-only access, but i don't want them seeing portions of the config.
Any help or suggestions would be greatly appreciated. Thanks

If they have an enable level login they will be able to see the whole configuration (absent encrypted passwords assuming you're using service password-encryption).
You can make logins more granular and prevent customers from having, say, the ability to execute arbitrary commands such as "show run". You could, for instance setup a given user to only be alllowed to execute "show interface status" etc. NX-OS has this ability pretty much 'baked-in'. For IOS-based systems, a bit more work is required.
Here is a guide for how to do it if you use TACACS for AAA:
https://supportforums.cisco.com/docs/DOC-15765
If you're using local authentication, you can do similar things using either privilege levels or cli views:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ftprienh.html
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtclivws.html
http://www.networkworld.com/community/node/57553
Hope this helps.

Read only access of a full schema ?

Hi all,
Can i create a role having read only access of a full schema ?
Thanks in advance.

Can i create a role having read only access of a
full schema ?The point here is that there is not a single command to perform this task, so you will have to do it on a per object basis. If you want to give access to the complete schema then it is advisable to create a script to grant on each table and on each view from the source schema. By providing read only to the full schema, I understand you are referring not also to the tables but also to the views, sequences, and may be stored program units, so you will have to properly define the scope of this 'full schema'.
Once you have properly defined the scope and have granted, as suggested by means of a role, then you may want to create synonyms for each granted object, so you don't have to qualify it with the schema name prefix when the object is being accessed.
~ Madrid

Read only access for objects in application designer

I want to apply read only access to all the objects in application designer. I would like to know how we can do this.
Jayaprakash Tedla

Jayaprakash,
On 8.48 :
1. Create a PERMISSION LIST
1.1 leave empty the navigator homepage
1.2 leave unchecked Can Start Application Server? and Allow Password to be Emailed?
1.3 On Pages tab, leave it empty
1.4 On PeopleTools tab, check Application Designer Access, then click on Definition Permissions, Tools Permissions Miscellaneous and Permissions, and put there the rights as well as you want. You can put Read Only on all component in one shot by clicking on the button, or one by one by choosing in the listbox for each type of components.
1.5 leave all other tab blank
2. Create a ROLE, and add the permission list created on step 1.
3. Create the user, and give the role created on step 2.
4. Open Application Designer, connect there with the new user, and enjoy on read-only access.
Hope this help,
Nicolas.

How to assign read only access for a database to a single user?

Hi All,
I have created a login for one of the user , and i used deny view to deny that user access to any of the databases to be shown.Now, he cannot see any databases in the explorer window.
My question is now i want to give this user permission ( read-only) to a single database. How can i do that? I have googled around and found some solutions but nothing is working.
Can someone please help me with any suggestions.
Thanks a lot for your time and suggestions in advance.
Thanks

Hi Bhanu,
Thanks for your reply, I am not sure i got it. I have a user created with the name of 'msam_test' and if i login into management studio with this userid and password i dont see any databases showing up because i used the DENY View command to hide which is
working fine.Now i just want to see only 1 database named 'suresh3_test' with a read only access to this database.
I tried using your code in the below way
USE [suresh3_test]
CREATE USER [<msam_test>] FOR LOGIN [<msam_test>] WITH DEFAULT_SCHEMA=[dbo]
exec SP_ADDROLEMEMBER 'DB_DATAREADER','<msam_test>'
But i receive an error saying
Msg 15007, Level 16, State 1, Line 3
'<msam_test>' is not a valid login or you do not have permission.
Msg 15410, Level 11, State 1, Procedure sp_addrolemember, Line 75
User or role '<msam_test>' does not exist in this database.
Can you please help me on this.
Thanks

Read-only access to the console

Anyone know how to set up a user to allow read-only access to the WLS console?
simon.

This is not possible with WLS6.1. There is an enhancement request filed
for this issue.
- Utpal
"Simon Spruzen" <[email protected]> wrote in message
news:3c751f2c$[email protected]..
>
Anyone know how to set up a user to allow read-only access to the WLSconsole?
And does anyone know whether the console can be 'zoned'? e.g. only allowaccess
to the security part of the tree.
Thanks, WLS people,
simon.

Read only access to Console Application ...

We have deployed development best practice examples in one WLS instance. So, all
developer can run our sample examples. All developer doesn't have admin privileges.
Some times, developer would like to get "READ ONLY " access to console application.
They can see JDBC / JMS / connection pool information.
Is it possible to allow READ ONLY Access to CONSOLE application ?
TIA
Wlstech

I don't think this is possible in the current release.
Kumar
"Wlstech" <[email protected]> wrote in message
news:3af30e21$[email protected]..
>
We have deployed development best practice examples in one WLS instance.So, all
developer can run our sample examples. All developer doesn't have adminprivileges.
Some times, developer would like to get "READ ONLY " access to consoleapplication.
They can see JDBC / JMS / connection pool information.
Is it possible to allow READ ONLY Access to CONSOLE application ?
TIA
Wlstech

Read-Only Access to external hard drive

I have a Fantom Drive 1 TB external hard drive connected to my computer. I only have "read only" access however. I've tried changing the permission to no avail. The readme.txt file for the drive says - "THIS DRIVE HAS BEEN PREFORMATTED FROM THE FACTORY USING THE NTFS FILE SYSTEM... NTFS has limited compatibility with Mac OS (requires 10.4 and newer, read only"
Does this mean I'm out of luck or is there something I can do that will allow me read/write access to this drive?
Thanks - Leah

Natively in OSX, you only have read-only access to NTFS partitions. Here's a free utility that's supposed to work for what you want (I've not tried it):
http://www.apple.com/downloads/macosx/systemdiskutilities/ntfs3g.html
HTH,
Brian

Read only access on abc scheema to all other users

i want to give read only access on abc scheema to all other users. which command will be used.

Hi
Create a role first
CREATE ROLE ABC_SELECTONLY_ROLE IDENTIFIED BY anypassword;
Assign SELECT permissions to that role.
spool c:\grantprivs.lst
SELECT 'GRANT SELECT ON ABC.'||OBJECT_NAME||' TO ABC_SELECTONLY_ROLE;'
FROM DBA_OBJECTS
WHERE OWNER LIKE 'ABC'
AND OBJECT_TYPE IN ('TABLE', 'VIEW');
spool off
@c:\grantprivs.lst
Attach role to users (EXCLUDE USERS AS YOU LIKE. In this example we have excluded SYS, SYSTEM etc)
spool c:\attachrole.lst
SELECT 'GRANT ABC_SELECTONLY_ROLE TO '||USERNAME||';'
FROM DBA_USERS
WHERE USERNAME NOT IN ('SYS','SYSTEM',DBSNMP','SYSMAN');
spool off
@c:\attachrole.lst
You may wish to create private synonyms for the users.
CREATE SYNONYM USER1.TABLENAME FOR ABC.TABLENAME;
Regards
Adnan

View read allows read only access

Similar Messages

Maybe you are looking for