ViewScopeException after using an ADF DI workbook

Hi,
I have a problem with my ADF application that is connected with an ADF DI workbook.
The steps to reproduce are the following
- Stop and then start the application in weblogic browser console
- Without accessing the application in the browser, open the integrated workbook and chose to connect. (If first you connect to the application from a browser and then from the integrated workbook, the error is not encountered)
- After the workbook is reinitialized, open the application in a browser. The following error is displayed in the browser window:
oracle.adf.share.exception.ViewScopeException: No technology supporting ViewScope found. Currently Faces and Trinidad support viewScope.
     at oracle.adf.share.ADFContext.getADFFacesViewScopeMap(ADFContext.java:498)
     at oracle.adf.share.ADFContext.getViewScope(ADFContext.java:405)
     at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getActiveRegionMap(DCTaskFlowBinding.java:1314)
     at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getActiveFlagFromViewScope(DCTaskFlowBinding.java:1332)
     at oracle.adf.controller.internal.binding.DCTaskFlowBinding.initialize(DCTaskFlowBinding.java:178)
     at oracle.adf.controller.internal.binding.DCTaskFlowBinding.isActive(DCTaskFlowBinding.java:1244)
     at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:111)
     at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3194)
     at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2871)
     at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:112)
     at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:192)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:21)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:231)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:267)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:71)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:398)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
I managed to reproduce this problem not only with my application, I also reproduced the error with MasterPriceList application (JDeveloper 11.1.1.4.0 and Excel 2007).
Edited by: Alex on Jun 23, 2011 6:01 AM

This unpleasant situation is generated by the flag SEARCHED_FACES_CONTEXT_CLASS set on true (on application scope map!) when DIRemoteServlet calls ADFContext.getCurrent().getViewScope() (called by method DCBindingContainer.processVariablesToken()).
The flag is set in the private method findFacesOrTrinidadContextClass() of ADFContext class (line 540). See ADF sources provided by JDeveloper 11g Release 1 PS 3 (11.1.1.4.0).
Excerpt from ADFContext.findFacesOrTrinidadContextClass():
520 contextClass = (Class)appScope.get(FACES_CONTEXT_CLASS);
521
522 if (contextClass == null && appScope.get(SEARCHED_FACES_CONTEXT_CLASS) == null)
523 {
524 try
525 {
532 }
538 finally
539 {
540 appScope.put(SEARCHED_FACES_CONTEXT_CLASS, true);
541 }
542 }
To avoid the ViewScopeException: "No technology supporting ViewScope found. Currently Faces and Trinidad support viewScope." you can use below code to reset the flag SEARCHED_FACES_CONTEXT_CLASS:
ADFContext adfContext = ADFContext.findCurrent();
try {
adfContext.getViewScope();
} catch (ViewScopeException e) {
Map<String, Object> appScope = adfContext.getApplicationScope();
if (appScope.get(SEARCHED_FACES_CONTEXT_CLASS) != null) {
// Remove locking flag from applicationScope to
// give a chance to Faces context initialization
appScope.remove(SEARCHED_FACES_CONTEXT_CLASS);
// Flag was removed, retry to initialize Faces context
adfContext.getViewScope();
I hope it'll be fixed in future releases.

Similar Messages

  • Clustering using Oracle ADF - CHECK_STATE_SERIALIZATION=all

    We are using Oracle ADF 11.1.1.6. We have started testing our Oracle ADF application for the cluster compatibility and used following document. We have coded all recommendations given in the document including enabling all applicable java classes to serialization and also setup adf_config.xml <adfc:adf-scope-ha-support>true</adfc:adf-scope-ha-support> and <adf:adf-scope-ha-support>true</adf:adf-scope-ha-support> exactly as per given in the document.
    http://docs.oracle.com/cd/E12839_01/core.1111/e10106/adf.htm
    Now, to check High Availability on a standalone web logic server for debugging purpose we configured Java Option "-Dorg.apache.myfaces.trinidad.CHECK_STATE_SERIALIZATION=all" as per the recommendation.
    After setting this flag system started throwing bunch of errors similar to the error given below.
    [2012-07-26T14:17:43.602-04:00] [OPERA_ADF1] [ERROR] [] [org.apache.myfaces.trinidadinternal.config.CheckSerializationConfigurator$MutatedBeanChecker] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: edozer] [ecid: 64915ee7c1860d85:40a983d1:138bf4550b2:-7ffd-0000000000005fcb,0] [APP: OperaApplications_o90_smoke#V9.0.0] Failover error: Serialization of Session attribute:data has changed from oracle.adf.model.servlet.HttpBindingContext@365f8709 to oracle.adf.model.servlet.HttpBindingContext@36b6565b without the attribute being dirtied
    The question is what are we missing here?
    Please note that our application is still missing ControllerContext.getInstance().markScopeDirty(pageFlowScope); but when I tried to create a sample application and deliberately left the "markScopeDirty" using below code the above mentioned error was not reproduceable.
    public class myBackingBean
         public void changeValueButton( ActionEvent ae )
         Map<String, Object> pageFlowScope = AdfFacesContext.getCurrentInstance().getPageFlowScope();
              pageFlowTestBean obj = ( pageFlowTestBean )pageFlowScope.get( "pageFlowTestBean" );
              System.out.println( "Old Value " + obj.getYVar() );
              obj.setYVar( "New Value" );
              /* ControllerContext.getInstance().markScopeDirty(pageFlowScope); */
    Can anyone shade more light on it?
    Also, I would like to know that can someone guide me what is the best practice to perform ControllerContext.getInstance().markScopeDirty(pageFlowScope);. Because developers can easily miss this statement and I didn't find any easyway to search the code that is missing this statement (I have already tried Jdeveloper's Audit feature and it works for very few cases).

    We checked the ADF source (pasted below). It reads that markScopeDirty is getting skipped if ADF_SCOPE_HA_SUPPORT is not configured but when we debug our application the serialization fires after every pageScope/viewScope variable gets changed regardless of markScopeDirty() is being called or not. That signifies that markScopeDirty() call is not needed. Do we really need markScopeDirty() everywhere in our application or this is just a public helper method to manually trigger replication for some exceptional case? Can anyone from team Oracle explain this behavior?
    @Override
    public void markScopeDirty(Map<String, Object> scopeMap)
    Boolean handleDirtyScopes =
    (Boolean)ControllerConfig.getProperty(ControllerProperty.ADF_SCOPE_HA_SUPPORT); //checks for adf-scope-ha-support
    if (handleDirtyScopes.booleanValue())
    if (!(scopeMap instanceof SessionBasedScopeMap))
    String msg = AdfcExceptionsArb.get(AdfcExceptionsArb.NOT_AN_ADF_SCOPE);
    throw new IllegalArgumentException(msg);
    ((SessionBasedScopeMap)scopeMap).markDirty();
    }

  • BUG after deploying/running ADF on 10.1.3(Linux) gives JBO-25002  error

    We have found out that there could be a bug in the Linux version of Application Server 10.1.3.0.0 or the Windows version of Jdeveloper.
    We are using:
    * Application Server 10.1.3.0.0 (Integrated Web Server, J2EE Server and Proces Management) on both a Windows XP machine and a Linux (Red Hat) machine.
    * Jdeveloper Version 10.1.3.1.0.3984 (Build JDEVADF_10.1.3.1.0_NT_061009.1404.3984)
    We are developing an ADF application using business/ADF components with several jspx pages in the latest version of JDeveloper.
    * Testing it on the embedded server of JDeveloper everything works perfectly fine. We can click through all the screens without getting errors;
    * After deploying the ADF application to the home instance on the Windows version of 10.1.3 Appplication server everything still works as expected.
    * Finally when we deploy the same application to the home instance of the Linux version of the 10.1.3 we are getting the following error after loading the first jspx form page:
    500 Internal Server Error
    JBO-30003: The application pool (nl.ech.tm.model.service.ECHTMServiceLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition nl.ech.tm.model.dataaccess.TmMarktPartijenRO of type View Definition not found     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1954)     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2756)     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:426)     at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:258)     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:397)     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:392)     at oracle.adf.model.bc4j.DCJboDataControl.rebuildApplicationModule(DCJboDataControl.java:1550)     at oracle.adf.model.bc4j.DCJboDataControl.beginRequest(DCJboDataControl.java:1408)     at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:99)     at oracle.adf.model.BindingContext.get(BindingContext.java:465)     at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:280)     at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:248)     at oracle.adf.model.binding.DCUtil.findContextObject(DCUtil.java:383)     at oracle.adf.model.binding.DCIteratorBinding.<init>(DCIteratorBinding.java:127)     at oracle.jbo.uicli.binding.JUIteratorBinding.<init>(JUIteratorBinding.java:60)     at oracle.jbo.uicli.binding.JUIteratorDef.createIterBinding(JUIteratorDef.java:87)     at oracle.jbo.uicli.binding.JUIteratorDef.createIterBinding(JUIteratorDef.java:51)     at oracle.adf.model.binding.DCIteratorBindingDef.createExecutableBinding(DCIteratorBindingDef.java:277)     at oracle.adf.model.binding.DCBindingContainerDef.createExecutables(DCBindingContainerDef.java:296)     at oracle.adf.model.binding.DCBindingContainerDef.createBindingContainer(DCBindingContainerDef.java:425)     at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:54)     at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:44)
    We have tried many things:
    * Checking the databindings in the model layer of the ADF application
    * Checking and testing the datasources on the Linux Application Server
    * Using Jdeveloper 10.1.3 and later 10.1.3.1
    * Deploy remotely from Jdeveloper
    * Deploy the EAR file from the EM consol
    * Adding extra ADF/BC4J libraries with the Linux deployment
    * Creating another OC4J instance, deploying the BC4J components and redeploying the ADF application
    * Reinstalling the Application Server software on Linux (clean install)
    Does anyone have a clue why it works on only on Windows and not on Linux?
    We have not tried yet :
    * To deploy another ADF business components application on the Linux application Server (when I have done this I'll get back to you)
    * Compare the versions of the ADF components used on the application server with the versions of the ADF components in the Jdeveloper installation (could there be a difference? Is there a newer version of Application Server 10.1.3 available?).
    Cheers,
    Thomas

    Thank you guys. We have found the solution for the deployment problem on Linux. Oracle technical support has pointed us into the right direction.
    During the development process two databindings (XML files) were renamed in the model layer (\Model\classes\model\dataaccess\). Like for example we had a data binding called DTBinding.xml that was renamed to DtBinding.xml. The changes were applied in the source code of the project. After depoyment to the application server it seems that the old databinding file was still there (DTBinding.xml). This was the cause of the JBO-25002 error on Linux. After renaming DTBinding.xml to correct file name DtBinding.xml (in the folder /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/OC4J_TMFB/applications/APPNAME/APPNAME/WEB-INF/classes/model/dataaccess) and restarting the OC4J instance on the application server the application was finally working on Linux.
    A few things to keep in mind when you are developing on Windows and deploying to Linux:
    * The Windows OS is not looking at uppercase characters in XML file names. As long as the file name of the XML is correct it will be found.
    * It seems that changes in the databinding filenames in the JDeveloper (10.1.3.1) source code are not correctly submitted after building and deploying the project. So be carefull with changing names.
    Cheers,
    Thomas

  • Display connected user in an ADF DI workbook

    Hi,
    I need to display in my ADF DI workbook the connected user in the following manner:
    - when the Login button is pressed, the login user should be displayed
    - when the Logout button is pressed, the message 'Offline mode'(or something meaningful for the end-user) should be displayed
    I have a JDeveloper 11.1.1.4.0 and I use Excel 2007.
    Regards,
    Alex

    Hi Alex,
    At this point there is not a way to achieve the desire functionality.
    Juan Camilo

  • Problem with flash on IE11 after using adobe cleaner

    Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
    Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • My MacBook screen is stuck in "presentation" mode after using my "Mini DisplayPort to VGA Adapter." How can I fix this?

    My MacBook screen is stuck in "presentation" mode (I don't know the correct term) after using my Apple Mini DisplayPort to VGA Adapter - meaning the screen fonts and windows are larger than usual. How can I fix this? I've changed the display settings to modify it a little, but it still doesn't look right. I reinserted the adapter numerous times and restarted my computer, it still hasn't worked. Help!

    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Lose airport connection after using boot camp and windows XP

    After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

    I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

  • Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

    Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

    Found the fix.  Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
    +++++++++++++++++
    edgravel
    Re: iTunes Store Won't Load, Won't Show Error Message
       Aug 13, 2011 4:32 PM    (in response to Daedalme) 
    I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
    Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
    then type in:
    Netsh winsock reset
    Hit enter, restart PC, open iTunes, go to Store
    Hope it works for you too. 

  • Aperture 2.0 Activation Key does not work after using older trial version

    I was using the installed trial version of Aperture 1.5+ in my recently purchased MacBook Pro Duo (December 2007). After using the trial version for 30 days I debated whether to take the plunge ...and then within a few days recieved word that v2.0 was out at 199$. That motivated me ...however, here I am nearly one week later without ability to activate a full blown version of 2.0.
    I recieved the activation key, but it doesn't accept it in the dialog to upgrade in the trial version. Hint seems to be that it is not a serial number I am entering but an activation key.
    I did not order a boxed version, so what do I do now? Support is not too helpful as I have searched Apple's website and have no clue as to where to go.
    Last resort ... I want my $199 back!

    did you download the trial for Aperture 2

  • My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Several Apps seem to just mysteriously shut down after using for a while. Same with Safari, I will be using Safari and it shuts down. Face book too. I've reset and shut down my iPad 3 and restart it, but it stills shuts down. What to do?

    Several Apps seem to mysteriously shut down after using them for a while. Face Book shuts down , netflix, Safari, and other Apps. They work fine for a short while, or a long while, and then shut down and it brings me to my regular desktop screen. I've tried restarting by completely shutting down the IPad until I see the apple pic and turned it back on, but the shutdowns of apps continue. Anyone else have this issue? It generally started shortly after downloading and installing IOS 7......

    Hi jennyoutwest,
    Welcome to the Support Communities!
    The following articles will provide some troubleshooting steps for your iPhone.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
    iPhone User Guide for iOS 7
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    The final troubleshooting step would be to restore your device:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
    Verify that you are using the latest version of iTunes.
    Back up your device.
    Transfer and sync content to your computer.
    Cheers,
    - Judy

  • Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

    Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

    4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
    If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
    You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
    Once Disk Utility loads, do the following:
    1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
    2 - Click the 'First Aid' tab
    3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
    4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
    5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
    You should boot straight into the system partition when complete.
    Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
    If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
    Hope that helps.

  • How can I execute program after using F4_Filename function?

    Hi all,
    I'm a new user on the forum. I've been working with ABAP and SAP for a few weeks. I wrote a program for importing data from excel file to SAP using BDC. During searching this forum I found information about F4_Filename function which allows users to browse the disc for a file. I'd like to add this function to my program. I have a parameter for a file name but this is an ordinary static string field. When I added the code which I found in the message on this forum the rest of program doesn't execute.
    This is simple program for example:
    REPORT  Z_TEST8_AB.
    DATA f_name TYPE STRING.
    PARAMETERS p_file like rlgrap-filename DEFAULT 'c:\test.xls'.
    f_name = p_file.
    write:/ f_name.
    This program works correctly. There is a field for parameter. I can change the default name for a file.
    After all, I can run the program (F8) and rest of the code is executed. The field for parameter dissapears from the screen and the file name is displayed. ( command write)
    Now I added a function F4_Filename
    REPORT  Z_TEST8_AB.
    DATA f_name TYPE STRING.
    PARAMETERS p_file like rlgrap-filename DEFAULT 'c:\test.xls'.
    at selection-screen on value-request for p_file.
      call function 'F4_FILENAME'
           exporting
                program_name  = syst-repid
                dynpro_number = syst-dynnr
                field_name    = 'p_file'
           importing
                file_name     = p_file.
    f_name = p_file.
    write:/ f_name.
    I can browse a computer for a file now but after selecting the file I can't run the rest of the code. When I click on the icon or press key F8 the field for parameter doesn't dissapier and the command write is not executed.
    What do I do wrong?
    Could anyone suggest me a solution? How can I executed the code after using this function?
    Thanks in advance.
    Regards,
    Arek.

    Hi arkadiusz,
    1. simple
    2.
    <b>start-of-selection.</b>
    f_name = p_file.
    write:/ f_name.
    regards,
    amit m.

  • [SOLVED] Getting freezes after using dwm for some time and exiting it

    Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
    Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
    This is my /var/log/Xorg.0.log
    [ 7.573]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 7.573] X Protocol Version 11, Revision 0
    [ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
    [ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
    [ 7.574] Build Date: 01 July 2013 10:48:42AM
    [ 7.574]
    [ 7.574] Current version of pixman: 0.30.0
    [ 7.574] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
    [ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 7.575] (==) No Layout section. Using the first Screen section.
    [ 7.575] (==) No screen section available. Using defaults.
    [ 7.575] (**) |-->Screen "Default Screen Section" (0)
    [ 7.575] (**) | |-->Monitor "<default monitor>"
    [ 7.575] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 7.575] (==) Automatically adding devices
    [ 7.575] (==) Automatically enabling devices
    [ 7.575] (==) Automatically adding GPU devices
    [ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 7.578] Entry deleted from font path.
    [ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 7.578] Entry deleted from font path.
    [ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 7.578] Entry deleted from font path.
    [ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 7.578] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 7.578] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 7.578] (II) Loader magic: 0x7fdc20
    [ 7.578] (II) Module ABI versions:
    [ 7.578] X.Org ANSI C Emulation: 0.4
    [ 7.578] X.Org Video Driver: 14.1
    [ 7.578] X.Org XInput driver : 19.1
    [ 7.578] X.Org Server Extension : 7.0
    [ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 7.580] Initializing built-in extension Generic Event Extension
    [ 7.580] Initializing built-in extension SHAPE
    [ 7.580] Initializing built-in extension MIT-SHM
    [ 7.580] Initializing built-in extension XInputExtension
    [ 7.580] Initializing built-in extension XTEST
    [ 7.580] Initializing built-in extension BIG-REQUESTS
    [ 7.580] Initializing built-in extension SYNC
    [ 7.580] Initializing built-in extension XKEYBOARD
    [ 7.580] Initializing built-in extension XC-MISC
    [ 7.580] Initializing built-in extension SECURITY
    [ 7.580] Initializing built-in extension XINERAMA
    [ 7.580] Initializing built-in extension XFIXES
    [ 7.580] Initializing built-in extension RENDER
    [ 7.581] Initializing built-in extension RANDR
    [ 7.581] Initializing built-in extension COMPOSITE
    [ 7.581] Initializing built-in extension DAMAGE
    [ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
    [ 7.581] Initializing built-in extension DOUBLE-BUFFER
    [ 7.581] Initializing built-in extension RECORD
    [ 7.581] Initializing built-in extension DPMS
    [ 7.581] Initializing built-in extension X-Resource
    [ 7.581] Initializing built-in extension XVideo
    [ 7.581] Initializing built-in extension XVideo-MotionCompensation
    [ 7.582] Initializing built-in extension XFree86-VidModeExtension
    [ 7.583] Initializing built-in extension XFree86-DGA
    [ 7.583] Initializing built-in extension XFree86-DRI
    [ 7.584] Initializing built-in extension DRI2
    [ 7.584] (II) LoadModule: "glx"
    [ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 7.586] (II) Module glx: vendor="X.Org Foundation"
    [ 7.586] compiled for 1.14.2, module version = 1.0.0
    [ 7.586] ABI class: X.Org Server Extension, version 7.0
    [ 7.586] (==) AIGLX enabled
    [ 7.587] Loading extension GLX
    [ 7.587] (==) Matched intel as autoconfigured driver 0
    [ 7.587] (==) Matched nouveau as autoconfigured driver 1
    [ 7.587] (==) Matched nvidia as autoconfigured driver 2
    [ 7.587] (==) Matched nv as autoconfigured driver 3
    [ 7.587] (==) Matched intel as autoconfigured driver 4
    [ 7.587] (==) Matched vesa as autoconfigured driver 5
    [ 7.587] (==) Matched modesetting as autoconfigured driver 6
    [ 7.587] (==) Matched fbdev as autoconfigured driver 7
    [ 7.587] (==) Assigned the driver to the xf86ConfigLayout
    [ 7.587] (II) LoadModule: "intel"
    [ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 7.592] (II) Module intel: vendor="X.Org Foundation"
    [ 7.592] compiled for 1.14.2, module version = 2.21.12
    [ 7.592] Module class: X.Org Video Driver
    [ 7.592] ABI class: X.Org Video Driver, version 14.1
    [ 7.592] (II) LoadModule: "nouveau"
    [ 7.592] (WW) Warning, couldn't open module nouveau
    [ 7.592] (II) UnloadModule: "nouveau"
    [ 7.592] (II) Unloading nouveau
    [ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "nvidia"
    [ 7.592] (WW) Warning, couldn't open module nvidia
    [ 7.592] (II) UnloadModule: "nvidia"
    [ 7.592] (II) Unloading nvidia
    [ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "nv"
    [ 7.592] (WW) Warning, couldn't open module nv
    [ 7.592] (II) UnloadModule: "nv"
    [ 7.592] (II) Unloading nv
    [ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "vesa"
    [ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 7.593] (II) Module vesa: vendor="X.Org Foundation"
    [ 7.593] compiled for 1.14.0, module version = 2.3.2
    [ 7.593] Module class: X.Org Video Driver
    [ 7.593] ABI class: X.Org Video Driver, version 14.1
    [ 7.593] (II) LoadModule: "modesetting"
    [ 7.593] (WW) Warning, couldn't open module modesetting
    [ 7.593] (II) UnloadModule: "modesetting"
    [ 7.593] (II) Unloading modesetting
    [ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 7.593] (II) LoadModule: "fbdev"
    [ 7.593] (WW) Warning, couldn't open module fbdev
    [ 7.593] (II) UnloadModule: "fbdev"
    [ 7.593] (II) Unloading fbdev
    [ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 7.594] (II) VESA: driver for VESA chipsets: vesa
    [ 7.594] (++) using VT number 1
    [ 7.594] (WW) Falling back to old probe method for vesa
    [ 7.594] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 7.594] (==) intel(0): RGB weight 888
    [ 7.594] (==) intel(0): Default visual is TrueColor
    [ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 7.594] (**) intel(0): Relaxed fencing enabled
    [ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
    [ 7.594] (**) intel(0): Triple buffering? enabled
    [ 7.594] (**) intel(0): Framebuffer tiled
    [ 7.594] (**) intel(0): Pixmaps tiled
    [ 7.594] (**) intel(0): 3D buffers tiled
    [ 7.594] (**) intel(0): SwapBuffers wait enabled
    [ 7.594] (==) intel(0): video overlay key set to 0x101fe
    [ 7.594] (II) intel(0): Output eDP1 has no monitor section
    [ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
    [ 7.596] (II) intel(0): Output VGA1 has no monitor section
    [ 7.596] (II) intel(0): EDID for output eDP1
    [ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
    [ 7.596] (II) intel(0): Year: 2012 Week: 0
    [ 7.596] (II) intel(0): EDID Version: 1.4
    [ 7.596] (II) intel(0): Digital Display Input
    [ 7.596] (II) intel(0): 6 bits per channel
    [ 7.596] (II) intel(0): Digital interface is DisplayPort
    [ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 7.596] (II) intel(0): Gamma: 2.20
    [ 7.596] (II) intel(0): No DPMS capabilities specified
    [ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 7.596] (II) intel(0): First detailed timing is preferred mode
    [ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
    [ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
    [ 7.596] (II) intel(0): Manufacturer's mask: 0
    [ 7.596] (II) intel(0): Supported detailed timing:
    [ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
    [ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
    [ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
    [ 7.596] (II) intel(0): LG Display
    [ 7.596] (II) intel(0): LP156WF4-SPB1
    [ 7.596] (II) intel(0): EDID (in hex):
    [ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
    [ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
    [ 7.596] (II) intel(0): 1c505400000001010101010101010101
    [ 7.596] (II) intel(0): 010101010101e83580a8703816402024
    [ 7.596] (II) intel(0): 550059c2100000180000000000000000
    [ 7.596] (II) intel(0): 00000000000000000000000000fe004c
    [ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 7.596] (II) intel(0): 004c503135365746342d535042310069
    [ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Printing probed modes for output eDP1
    [ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
    [ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 7.598] (II) intel(0): EDID for output VGA1
    [ 7.598] (II) intel(0): Output eDP1 connected
    [ 7.598] (II) intel(0): Output VGA1 disconnected
    [ 7.598] (II) intel(0): Using exact sizes for initial modes
    [ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
    [ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
    [ 7.598] (==) intel(0): DPI set to (96, 96)
    [ 7.598] (II) Loading sub module "fb"
    [ 7.598] (II) LoadModule: "fb"
    [ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 7.599] (II) Module fb: vendor="X.Org Foundation"
    [ 7.599] compiled for 1.14.2, module version = 1.0.0
    [ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7.599] (II) Loading sub module "dri2"
    [ 7.599] (II) LoadModule: "dri2"
    [ 7.599] (II) Module "dri2" already built-in
    [ 7.599] (II) UnloadModule: "vesa"
    [ 7.599] (II) Unloading vesa
    [ 7.599] (==) Depth 24 pixmap format is 32 bpp
    [ 7.599] (II) intel(0): [DRI2] Setup complete
    [ 7.599] (II) intel(0): [DRI2] DRI driver: i965
    [ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
    [ 7.599] (II) UXA(0): Driver registered support for the following operations:
    [ 7.599] (II) solid
    [ 7.599] (II) copy
    [ 7.599] (II) composite (RENDER acceleration)
    [ 7.599] (II) put_image
    [ 7.599] (II) get_image
    [ 7.599] (==) intel(0): Backing store disabled
    [ 7.599] (==) intel(0): Silken mouse enabled
    [ 7.600] (II) intel(0): Initializing HW Cursor
    [ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 7.600] (==) intel(0): DPMS enabled
    [ 7.600] (==) intel(0): Intel XvMC decoder enabled
    [ 7.600] (II) intel(0): Set up textured video
    [ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
    [ 7.600] (==) intel(0): hotplug detection: "enabled"
    [ 7.613] (--) RandR disabled
    [ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
    [ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 7.634] (II) AIGLX: Loaded and initialized i965
    [ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
    [ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    [ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.669] (II) LoadModule: "evdev"
    [ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 7.670] (II) Module evdev: vendor="X.Org Foundation"
    [ 7.670] compiled for 1.14.2, module version = 2.8.1
    [ 7.670] Module class: X.Org XInput Driver
    [ 7.670] ABI class: X.Org XInput driver, version 19.1
    [ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.670] (**) Video Bus: always reports core events
    [ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
    [ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.670] (--) evdev: Video Bus: Found keys
    [ 7.670] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
    [ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 7.670] (**) Option "xkb_rules" "evdev"
    [ 7.670] (**) Option "xkb_model" "pc104"
    [ 7.670] (**) Option "xkb_layout" "us"
    [ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.684] (**) Video Bus: always reports core events
    [ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
    [ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.684] (--) evdev: Video Bus: Found keys
    [ 7.684] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
    [ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 7.684] (**) Option "xkb_rules" "evdev"
    [ 7.684] (**) Option "xkb_model" "pc104"
    [ 7.684] (**) Option "xkb_layout" "us"
    [ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.685] (II) Using input driver 'evdev' for 'Power Button'
    [ 7.685] (**) Power Button: always reports core events
    [ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 7.685] (--) evdev: Power Button: Found keys
    [ 7.685] (II) evdev: Power Button: Configuring as keyboard
    [ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 7.685] (**) Option "xkb_rules" "evdev"
    [ 7.685] (**) Option "xkb_model" "pc104"
    [ 7.685] (**) Option "xkb_layout" "us"
    [ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 7.685] (II) No input driver specified, ignoring this device.
    [ 7.685] (II) This device may have been added with another device file.
    [ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 7.685] (**) Sleep Button: always reports core events
    [ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 7.685] (--) evdev: Sleep Button: Found keys
    [ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
    [ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 7.685] (**) Option "xkb_rules" "evdev"
    [ 7.685] (**) Option "xkb_model" "pc104"
    [ 7.685] (**) Option "xkb_layout" "us"
    [ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
    [ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
    [ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
    [ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
    [ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
    [ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
    [ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
    [ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
    [ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
    [ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
    [ 7.686] (**) Option "xkb_rules" "evdev"
    [ 7.686] (**) Option "xkb_model" "pc104"
    [ 7.686] (**) Option "xkb_layout" "us"
    [ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 7.686] (II) No input driver specified, ignoring this device.
    [ 7.686] (II) This device may have been added with another device file.
    [ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
    [ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 7.686] (**) Option "xkb_rules" "evdev"
    [ 7.686] (**) Option "xkb_model" "pc104"
    [ 7.686] (**) Option "xkb_layout" "us"
    [ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
    [ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 7.687] (II) LoadModule: "synaptics"
    [ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
    [ 7.687] compiled for 1.14.1, module version = 1.7.1
    [ 7.687] Module class: X.Org XInput Driver
    [ 7.687] ABI class: X.Org XInput driver, version 19.1
    [ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 7.687] (**) Option "Device" "/dev/input/event7"
    [ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 7.810] (**) Option "TapButton1" "1"
    [ 7.810] (**) Option "TapButton2" "2"
    [ 7.810] (**) Option "TapButton3" "3"
    [ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
    [ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 7.853] (II) No input driver specified, ignoring this device.
    [ 7.853] (II) This device may have been added with another device file.
    Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
    In case it's of any use, this is my # uname -a
    Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
    Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
    Any ideas or advice to point me in the right direction would be very much appreciated.
    Thanks in advance.
    Last edited by contiver (2013-08-16 20:25:34)

    I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
    static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
    but it didn't work for me.
    Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
    BUG: unable to handle kernel paging request at ffffc90014ce8000
    IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
    Oops: 0002 [#1] PREEMPT SMP
    Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
    CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
    Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
    task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
    RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
    RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
    RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
    RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
    R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
    R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
    FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Stack:
    0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
    ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
    0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
    Call Trace:
    [<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
    [<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
    [<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
    [<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
    [<ffffffff813200bd>] redraw_screen+0x17d/0x240
    [<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
    [<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
    [<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
    [<ffffffff8130b407>] tty_ioctl+0x277/0xb90
    [<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
    [<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
    [<ffffffff8117328e>] ? ____fput+0xe/0x10
    [<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
    [<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
    [<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
    Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
    RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    RSP <ffff8800797efaa8>
    CR2: ffffc90014ce8000
    ---[ end trace aff6cb5ad5097aef ]---

  • Overhead calculation not happening after using Overhead key and orgin group

    overhead calculation not happening after using Overhead key and orgin group.
    There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
    We want to apply/add Overhead to SFG/FG materials.
    We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
    But our problem is with material standard cost estimate process.
    We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
    In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
    But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
    We have checked all things as mentined below.
    Firstly that the correct costing sheet is assigned to the valuation
    variant.
    That the costing sheet is entered for the appropriate material type:
    Finished and semi finished or material components.
    All of the above can be checked and verified via transaction OKKN.
    In addition make sure that the base value maintained is present in the
    costing, for example the base may include an Origin group, is that
    origin group part of the materials being costed?
    Similarly if the base is found and values exist how is the overhead
    rate of the costing sheet set up, is it valid etc.
    And finally do a similar check for the credit.
    we doubt this as a programm error...
    So, request all experts to have ur feedback..

    Dear,
    Check your origin group & material unit of mesaurement is same.
    some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
    You can see unit of measure for material in Additional data - unit of measure.
    Check BOM component material unit also.
    Check same  unit of measure is maintain in KZS2
    I hope above will useful.
    GOPAN

Maybe you are looking for

  • Safari bounces and then files a problem report repeatedly, but doesn't open

    Hello and thank you for reading this, I have seen several other posts about the same problem, but the suggested solutions don't work for me. When I try to open safari it bounces for a bit but then tells me that "safari quit unexpectedly" and even tho

  • Our family used to operate under one itunes account.  We now need to have our own accounts.

    Our family used to operate under one itunes account.  We now need to have our own.  How do we keep our own downloads for the new accounts?  We have realized now that we are all in the icloud world we have each others downloads on our devices.

  • Help in IOS 7.1.2

    hi experts i have an Iphone 4s was running on IOS 7.0.4, and i was check on settings for update and don't find anything ! any way i knew that apple releases IOS 7.1.2 and i choose to update\restore to it, downloaded the firmware then before i continu

  • How to upload different views of customer master data using LSMW-IDOC

    I need to upload customer master data  using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each

  • Application Server deployment

    I have been having this heated debate on whether to run multiple applications on the same instance of the application server or on different instances. I am in favor of running them on different applications servers, what I would ask you guys is that