Aperture 2.0 Activation Key does not work after using older trial version

I was using the installed trial version of Aperture 1.5+ in my recently purchased MacBook Pro Duo (December 2007). After using the trial version for 30 days I debated whether to take the plunge ...and then within a few days recieved word that v2.0 was out at 199$. That motivated me ...however, here I am nearly one week later without ability to activate a full blown version of 2.0.
I recieved the activation key, but it doesn't accept it in the dialog to upgrade in the trial version. Hint seems to be that it is not a serial number I am entering but an activation key.
I did not order a boxed version, so what do I do now? Support is not too helpful as I have searched Apple's website and have no clue as to where to go.
Last resort ... I want my $199 back!

did you download the trial for Aperture 2

Similar Messages

Keyboard does not work after using Support Drivers

I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
I did a system restore to get it back to a usable state for the time being.
Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?

Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Linux logfile monitoring does not work after using "privileged datasource"

Hello!
I have noticed a strange behaviour on one of my Linux Agents (lets call it server_a) regarding logfile monitoring with the "Microsoft.Unix.SCXLog.Datasource" and the "Microsoft.Unix.SCXLog.Privileged.Datasource".
After successfully testing monitoring of /var/log/messages on server_a with the "Privileged Datasource". This test has been on server_a and the MP containing this rule has been delete from the management gorup before the following tests.
I wanted to test another logfile (lets call it logfile_a) using the normal datasource "Microsoft.Unix.SCXLog.Datasource" on server_a. So I created the usual logfile rule (rule_a) in XML (which I have done countless times before) for monitoring
logfile_a. Logfile_a has been created by the "Linux Action Account User" with reading rights for everyone. After importing the Management Pack with the monitoring for logfile_a I had the following warning alert in the scom console managing
server_a:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_a" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
To make sure I did not make any mistakes in the XML i have created a new logfile rule (rule_b) monitoring "logfile_b" on "server_a" using the "Logfile Template" under the authoring tab. logfile_b was also created by the "Linux
Action Account User" and had reading rights for everyone. Unfortunately this logfile rule created the same error:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_b" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
Although both rules (rule_a and rule_b) used the "Microsoft.Unix.SCXLog.Datasource" which uses the Action Account for monitoring logfiles, the above error looks to me as SCOM wants to use the privileged user, which in this case it not necessary
as the Action Account can read logfile_a and logfile_b without any problems.
So after a few unsuccessfull tries to get both rules to raise an alert I tried to use the "Microsoft.Unix.SCXLog.Privileged.Datasource" for rule_a as last resort. Then suddenly after importing the updated Management Pack I finally received the
alert I desperately waited for this whole time.
Finally after lot of text here are my questions:
Could it be that the initial test with the Privileged Log Datasource somehow screwed up the agent on server_a so it could not monitor logfiles with the standard log datasource? Or may anyone of you might have an idea what went wrong here.
Like I said both logfile could be accessed and changed by the normal Action Account without any problems. So privileged right are not needed. I even restarted the scom agent in case something hanged.
I hope I could make the problm clear to you. If not, don´t hesitate to ask any questions.
Thank you and kind regards,
Patrick

Hello!
After all that text, I fogrot the most essential information..
We are currently using OpsMgr 2012 SP1 UR4, the monitored server (server_a) has agent version 1.4.1-292 installed.
Thanks for the explanation of how the logprovider works. I tried to execute the logfilereader just to see if there are any errors and everything looks fine to me:
ActionAccount @server_a:/opt/microsoft/scx/bin> ./scxlogfilereader -v
Version: 1.4.1-292 (Labeled_Build - 20130923L)
Here are the latest entry in the scx.log file:
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23186
* Process started: 2014-03-31T08:29:09,136Z
* Log format: <date> <severity>     [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:29:09,138Z Warning    [scx.logfilereader.ReadLogFile:23186:140522274359072] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_slogfilewithoutsudo.txtEDST02
2014-03-31T08:29:09,138Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:29:09,138Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23284
* Process started: 2014-03-31T08:30:06,139Z
* Log format: <date> <severity>     [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:30:06,140Z Warning    [scx.logfilereader.ReadLogFile:23284:140016517941024] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_stest.txtEDST02
2014-03-31T08:30:06,142Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:30:06,143Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
Strangely I could not acces the "Action Account User" directory under /var/opt/microsoft/scx/log as "ActionAccount" user. Is it ok for the directory to have the following rights: drwx------ 2 1001 users? Instead of "1001" it should say "ActionAccount",
right?
This could be a bit far fetched, but perhaps the logfile provider can´t access logfiles as the "ActionAccount" on this server because it needs to write in the scx.log file. But as the "ActionAccount" can´t access the file, the logfile provider throws
an error. And as "Privileged Account" the rule works flawlessly, as the logfile provider running in root context can access everything.
Don´t know if that makes sense, but right now it sounds logical to me.

Report Generation for Excel does not work after using the Application Builder

I have a VI that writes data to an Excel file using the Report Generation Toolkit. I recently compiled the VI into a single Application (EXE) using the Application Builder. My VI runs its tests properly, but no data is written to Excel. What could be the cause? I don't receive any error messages.

Hi
I usually build exe-files, which sometimes also have report functionality.
Open the Application Builder and check the following things:
1. Add the following vis: _Word Dynamic VIs.vi, _Excel Dynamic VIs.vi They should be located in the directory ..\LabVIEW X.X\vi.lib\addons\_office in the llbs _wordsub.llb and _exclsub.llb (report1.jpg)
2. If you use an Installer, go to the Advanced Settings. There you can select some things to include in the Installer. Check if "NI Reports Support" is selected. (report2.jpg)
These are the things I always do, if I need reports and I never had problems up to now. I made two screen-shots of these settings.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
report.zip ‏25 KB

My serial number will not work after using the trial, I purchased the software from Best Buy.

Adobe Premiere Elements 11 I have uninstalled and reinstalled, but still will not accept serial number. Please advise

lindawhitssitt
Please use the following link to reach Adobe Chat with your serial number issue. You should get immediate and effective resolution to your issue. After the link opens, click on "I still need more help." and the Adobe Chat pop up will appear.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=serial-number-issues-o r-activating-my-product
Please let us know the outcome.
Thanks.
ATR

TS1996 my zero key does not work as it should after software update any help

my zero key does not work after a software update when i try to use it /pp0 then volume symbol appears on the screen just happened after the update

Hello, pakie1.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that you may find helpful when experiencing keyboard issues.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Cheers,
Jason H.

Tab key does not work

This is very strange, please read.
My tab key does not work. It will not move from one text field to another.
I have checked my keyboard settings. "Full keyboard access:" is at the default "Text boxes and lists only".
I have deleted this user and recreated the user, and with the completely new user the tab key does not work. Other users on the machine it DOES work.
This is happening now on 3 of our 5 machines.
Lastly, when I turn on the keyboard viewer (International/Input Menu/Keyboard viewer: it shows you what key the system thinks you are pressing when you press a key on the keyboard), it shows that when I press the tab key, the Command key is being held down instead. It's not showing that the tab key is being pressed.
Has anyone seen this previously? Again, it's happening on 3 of our 5 machines (some users the tab key works, some users it doesn't). These are fresh user creations (no special software installed, no prefs changed, etc...)
Thank you for any info!!!

"Repair Disk Permissions" from Disk Utility may help.
Also, cmd-opt-n-v (Clear NV RAM) may help as well.
Mihalis.
Dual G5 @ 2GHz Mac OS X (10.4.6)

Always Script Editor ... Alt Gr key does not work

Hi,
With IE6 in SQL Script Editor
Alt Gr Key does not work.
For instance, I cannot type ||
In fact it's a copy-paste from SQL command (which works well)
Note Script Editor does not work with Firefox.
Thank you for any information
Regards
JRD120

You might try this:
Remove any USB device except mouse/keyboard
Perform a PRAM-reset (hold ALT-CMD-P-R until you've heard the starting chime 3 times)

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

Brand new macbook --- DELETE KEY DOES NOT WORK --- how to fix?

I have a brand new MacBook and the delete key does not work. Is there a way to fix this?

You have 14 days to exchange it no questions asked.

MacBook Pro up arrow key does not work how to fix it?

When I am just working on the computer the up arrow key does not work at all but when I use bootcamp to go to the PC side the arrow works so i know its not a phisical problem, i have tryed everything i know and still no success.

Hello brooklinekilla,
I would be concerned too the up arrow key on my keyboard was not working. I found an article that can assist with further isolating and troubleshooting issues with the built in keyboard. I recommend following the steps under the section titled, "Some keys don't work as expected" in the following article:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Is there a keyboard shortcut to launch firefox 3.6.3 with windows vista? Hot key (ctrl + alt + key) does not work.

The hot key (ctrl + alt + key) does not work. This is in Windows Vista.

Thank you Morbus and Cor-el, for your prompt replies. Here's what I did: I've placed the Firefox icon in the quick launch toolbar. So I right-click this firefox icon>Properties>Shortcut tab>in Shortcut Key field, add X (the word "None" changes to "ctrl + alt + X")>Apply>Okay>and that closes the dialog window.
Then, to try the new launch short-cut, I press and hold down, in order, ctrl, then alt, then x (holding all three down) . . . and nothing launches.
I thought this would do it! So any further thoughts would be a splendid help ---- many thanx!

F2 key does not work with excel

Dear Friends,
when i am working with excel, f2 key does not work as its shortcut. can you please help me how i can solve this. thanks a lot

what if you press Fn + F2? Does anything pop up?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

New Apple Keyboard Launchpad F4 key does not work

New Apple Keyboard Launchpad F4 key does not work
Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
Maybe someone can help me!!
Thank you
greeting

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

Aperture 2.0 Activation Key does not work after using older trial version

Similar Messages

Maybe you are looking for