Virt-install hangs at "Write protecting the kernel read-only data",

I am trying to Install Oracle Linux 5.4 as a Paravirtualized Machine on an Oracle VM Server (2.2.1).
Following are the steps that I followed:
I have the dvd iso file on /OVS/iso_pool
1. mkdir -p /el/EL5-x86
2. mount -t iso9660 -o ro,loop /OVS/iso_pool/Enterprise-R5-U4-Server-x86_64-dvd.iso /el/EL5-x86
3. service portmap start
4. service nfs start
5. exportfs *:/el/EL5-x86
6. mkdir /OVS/running_pool/vm01
7. virt-install
and gave the following details
Name of the virtual machine: vm01
RAM:7168
disk path: /OVS/running_pool/vm01/system.img
disk space: 80GB
graphics support: yes
install location- nfs:OVM server ipaddress:/el/EL5-x86
It starts the install, but hangs at
XENBUS: Device with no driver: device/vbd/51713
XENBUS: Device with no driver: device/vbd/51714
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Initalizing network drop monitor service
Write protecting the kernel read-only data: 483k
Can you please help
Thanks,
Radhika

Yes I am able to connect to the guest vnc console, and proceed with the install.
I did, Choose a language, choose a keyboard, configure TCP/IP, Manual TCP/IP configuration, after this I am getting a message "That directory could not be mounted from the server"
I tried giving the IPAdress of the OVM Server where the directory was mounted, nothing is working. I cannot proceed any further.

Similar Messages

Has anyone else ever had a problem where you had to perform 2 datasocket writes before the datasocket read would pick up the change?

I have a local VI that is simply a control that writes to the datasocket server whenever the control value changes.(the dataitem on the server is permanent - its initialized and never released by the server)
In the same local VI I have a datasocket read polling a different dataitem on the server.
The remote machine has a VI that reads the permanent dataitem on the server once per second.
For some reason, after adding the local VI mentioned above, the remote VI stopped picking up the first change in the permanent variable.
I'd start both the local and remote VIs...
Then change the local control and the remote V
I would not update - as if the datasocket write(upon adjusting the control) did not take place. So I'd change the control value again - this time the remote VI would update to this new value. And from here on out - the remote VI would update correctly. This problem only occurs when the local VI is first started up.
What in the heck is going on?

dingler44 wrote:
>
> Has anyone else ever had a problem where you had to perform 2
> datasocket writes before the datasocket read would pick up the change?
>
> I have a local VI that is simply a control that writes to the
> datasocket server whenever the control value changes.(the dataitem on
> the server is permanent - its initialized and never released by the
> server)
> In the same local VI I have a datasocket read polling a different
> dataitem on the server.
> The remote machine has a VI that reads the permanent dataitem on the
> server once per second.
> For some reason, after adding the local VI mentioned above, the
> remote VI stopped picking up the first change in the permanent
> variable.
> I'd start both the local and remote VIs...
> Then change the local control and the remote VI would not update -
> as if the datasocket write(upon adjusting the control) did not take
> place. So I'd change the control value again - this time the remote
> VI would update to this new value. And from here on out - the remote
> VI would update correctly. This problem only occurs when the local VI
> is first started up.
>
> What in the heck is going on?
Gorka is right, this came up on Info-LV a few days ago. Someone
described a similar problem. I replied that I had seen similar
behaviour, reported it to NI, and they verified a bug. There is no fix
yet, but they are aware of it and will fix it. No anticipated release
date for the fix.
Regards,
Dave Thomson
David Thomson 303-499-1973 (voice and fax)
Original Code Consulting [email protected]
www.originalcode.com
National Instruments Alliance Program Member
Research Scientist 303-497-3470 (voice)
NOAA Aeronomy Laboratory 303-497-5373 (fax)
Boulder, Colorado [email protected]

...trying to install Adobe Acrobat XI. The msg reads " Installer mis-configured."

...trying to install Adobe Acrobat XI. The message reads " Installer mis-configured." Clearly, I can't proceed. Is a new version of the installer available? I'm not having a lot of luck with downloads from the Adobe site these days. I'm not too confident about purchasing online given two bad experienes with files that are missing (dll) and now this installer problem.

Thank you for replying, Jeff. I'm running Windows 7 -- 64 bit. Also, once the.exe file downloaded, I clicked "Run."
Date: Wed, 29 May 2013 11:22:37 -0700
From: [email protected]
To: [email protected]
Subject: ...trying to install Adobe Acrobat XI. The msg reads " Installer mis-configured."
    Re: ...trying to install Adobe Acrobat XI. The msg reads " Installer mis-configured."
    created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Totally Frustrated what are you clicking on prior to receiving the message the Installer is Mis-configured? Also which operating system do you have installed?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5362420#5362420
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5362420#5362420
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5362420#5362420. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Have installed creative cloud, but while the apps read "up to date," they are not even installed and cannot be opened. Have uninstalled and reinstalled Creative Cloud/Adobe.

Have installed creative cloud, but while the apps read "up to date," they are not even installed and cannot be opened. Have uninstalled and reinstalled Creative Cloud/Adobe. Horribly frustrating. This is my second computer for installing creative cloud. Does that make a difference?

Hi Jakegosselin,
Please refer to the below article.
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
Thanks

1) Make the column read only without coding

Please guid eme how to make the column read only in the list without using the coding.
Vij

Basically, the answer is that you can't. There are ways to change a specific list view to make a column readonly by replacing the form with a custom DataView form. But that only applies to that view and since users can create their own views,
those views would have read/write access to the column if the user has read/write access to the item. SharePoint only supports security down to the item level out of the box and not down to the individual column level.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Best way to make all the items read-only in many pages for a resposibility?

Hi,
We have the following requirement:
We need to make all the fields read-only in 5 standard self-service pages for a particular responsibility. One way is to personalize these pages at responsibility level. Is there any other quick/better way to do it?
Highly appreciate your suggestions on this.
thanks,
Hem

Hem,
Personalisation is easiest and fastest way of doing this. The same requirement can be acheieved by extensions of CO by setting the bean properties rr by SPEL binding by extending VO.
But when I can get something done without coding at all that approach is best, I am sure u agree :)!
--Mukul

How to control the canvas of the ADF Read-Only Form

Hi
Could you give an idea of how to control the canvas of the fields in ADF Read-Only form. My requirements are as follows
1) ALL the labels has to left justified irrelevant of their length
2) ALL the values also has to left justified and should be wrapped if it exceeds some length.
3) I want to show the results in more than one column with proper alignment as mentioned above.
Thanks in advance.
Sivaji.......

Sivaji,
There is a "rendered" attribute on the af:table component. You can write EL to pragmatically control the evaluated value of expression to set the visibility.
Assuming you are using BC for your middle layer you can do something like the following:
<af:table ...
rendered = #{YourDetailViewObject.somestring.inputValue != null}
..>
Z

Can't write to pacman.conf -- Read only file

Hello everybody,
I'm a complete noob when it comes to installing (arch) linux. I just installed (a part of) arch linux to my old computer, but I'm stuck now.
I used the Arch Linux beginners guide and now I'm at the part where I need to configure pacman.
But once I'm trying to adjust something in pacman.conf the computer tells me it's a read only file.
I also can't udate the system when I use pacman -Syu I get: error: failed to update core/extra/community (unable to lock database)
Btw I installed syslinux and I'm logged in as root.
I hope you can help me with this and that i'm not asking a really dumb question.
Thanks in advance!

Pimmmo wrote:
I can only take pictures, because my arch linux is on an other computer.
here is my fstab (btw it's read only as well)
And here is my mount output
That's not even the full /etc/fstab. It's horrible.
Add a tmpfs like in the fstab wiki entry. It's probably because you used one ">" when using genfstab (my bad, sorry).
https://wiki.archlinux.org/index.php/Fstab
PS: Which bootloader do you use? Syslinux? Don't remove "ro" then. Keep it, just like in the examples.
Last edited by DSpider (2012-09-18 13:22:25)

When I try to save downloads directly to a folder in Documents I get this error message "Word cannot save or create this file. The disk may be full or write protected." I can only save to the Desktop.

Any ideas on how to save a download to a document folder? I have tried to "save as" and "move to" documents from the desktop, but the same message appears. Please help!

Yes! Your question prompted me to explore the Finder...I can move folders and files around to place docs where I want them to be. Thank you so very much! Is this the only way to move downloads to documents?

Unable to open .pdf in Firefox 3.6.8 with Adobe Reader 9.3.3 installed. Error message is "The Acrobat/Reader that is running can not be used to view PDF files in a web browser."

I am unable to open a PDF file in Firefox 3.6.8. Adobe Acrobat Reader 9.3.3 is installed. I get the error message "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a web browser."

You can get that error if there is still an old Adobe Reader plugin in the plugins folder in the Firefox program folder.
C:\Program Files\Mozilla Firefox\plugins\nppdf32.dll
See also http://kb.mozillazine.org/Adobe_Reader

I set up a blog through google with a gmail account. I was able to pull up the blog ap from the ap store. BUT, page 1 (which gives me access to write, edit, etc) only comes up on my iphone; page 1 does not come up on my ipad....only the blog, "read only

I set up a blog through google with a gmail account. I was able to pull up the blog ap from the ap store. When I go into the blog ap on my iphone, page 1 comes up first.....this is the page that allows me to edit, add, etc. Unfortunately, when I go into the blog on my ipad, I only get the written information (blog) that I posted; there is no page 1 which allows me to make editions, etc. How can I get this information over to my ipad?

I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

How to protect read-only data in Swing app from tampering?

First off I am new to cryptography and trying to find the best approach for a problem.
We have a Swing application that uses xml-based template files to display complex forms and validate data entry. Based on the size and complexity of the forms it was deemed better to have a distributed stand-alone application instead of a web-based solution. However, we want to ensure users do not tamper with the template rules in order to pass the validation checks. All of the xml-based template files are distributed within a single jar file.
The first thought was to build a list of check-sums of the template files and to compare the template to the approariate check-sum from within the list before loading a template. This would prevent the more casual user from tampering with the file but not someone knowledgeable in check-sum who could recalculate the CRC and update the list after making changes.
Another thought was to use a private key to encrypt the CRC list before distribution and a public key to decrypt it during execution with the keys maintained in a keystore. However, once again, an adventurous user could weed through the obfuscated code to determine the password to the keystore, create a new keystore with the same password and use its private key to regenerate the CRC list from altered templates.
I feel like there must be a simpler approach that will provide a bullet prove implementation. Any suggestions?

I think you have to re-think your design.
Whether you use Java, C#,C or C++ a hacker can look through the binary (class file, exe file etc) and after working out what is happening he can modify your code.
It is my opinion that your best bet is to use client/server but even with that you cannot keep any private data or code on the client.
You will still have to think about 'man-in-the-middle' and 'spoof site' attacks.

Write protect a column in ALV Table

Hi All,
I have an ALV Table with few columns. Some of the columns has got check boxes. Now my question is, depending on the conditions i want to write protect a particular column. Could you tell me how to do it?
Thanks & Regards,
Ravi

Hi Ravi,
By default the column of ALV table are in read only mode but you want them to based on certain contion them first make that column editable by using the following code
data l_table type ref to cl_salv_wd_config_table.
l_table = l_salv_wd_table->get_model( ).
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
lr_column_settings ?= l_table.
l_column = lr_column_settings->get_column( 'CARRID' ).
CREATE OBJECT lr_input_field EXPORTING value_fieldname = 'CARRID'.
l_column->set_cell_editor( lr_input_field ).
data: lr_table_settings type ref to if_salv_wd_table_settings.
lr_table_settings ?= l_table.
lr_table_settings->set_read_only( abap_false ).
Now create an event handler associated with the ON_CLICK event of alv and used the following code the made the column read only (based on condition)
data l_table type ref to cl_salv_wd_config_table.
l_table = l_salv_wd_table->get_model( ).
data: lr_table_settings type ref to if_salv_wd_table_settings.
lr_table_settings ?= l_table.
lr_table_settings->set_read_only( abap_false ).
I hope it helps.
You can also refer this article[Editing ALV in Web Dynpro for ABAP |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1].
Regards
Arjun

[SOLVED] Downgrading the Kernel

I just did a system upgrade which gave me the 2.6.32-ARCH Kernel. Problem is, the RT2860 wifi driver doesn't seem to play nicely with this kernel. I now have no network connection.
From what I can see, there doesn't seem to be a patch available for this? Which is why I want to revert back to my old kernel. I had a looksy at the ArchWiki page on downgrading packages but my problem lies with ...what packages do I need to downgrade?
Do I just 'pacman -rsn Kernel26 Kernel26-firmware Kernel26-headers' then install those three packages from my packman cache? How do I go about fixing modules and whatnot... OSS (sound system) complained about requiring the kernel header package. Do I also need to downgrade this?
Last edited by tehkane (2010-01-03 04:09:45)

There is a thread on this issue http://bbs.archlinux.org/viewtopic.php?id=86447
The driver works fine: 2.6.32 renamed the interface from ra0 to wlan0 - if you make the change in your network manager you won't need to downgrade the kernel.

Is there a list of drivers in the kernel?

hey everyone...
i'm searching for a list of drivers included in the linux kernel.
i knew modprobe -l but this method is not really handy.
as example a website with categories or filters would be good. i hope anyone can help.

Not really an organized list, but this procedure can be usefull.
# zcat /proc/config.gz | less
This way you can check the kernel configuration settings.
Then make a search inside "less" with:
/drivers
This way, you can read the driver headers and check those that are "=yes" (the drivers compiled in the kernel).

Virt-install hangs at "Write protecting the kernel read-only data",

Similar Messages

Maybe you are looking for