Virtual Key Figures- RSRT says Key Figures are not valid

Question

Hi,
Getting the following mssg when I try to generate a query in RSRT for the first time after I have coded Virtual Key Figures.
For the characteristic that I am pulling the user entered data from:
/BIC/ZNEWEST is not a valid characteristic for InfoProvider 0QM_C08
Message no. BRAIN122
Diagnosis
"Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZNEWEST as the characteristic to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08.
System response
/BIC/ZNEWEST is ignored.
Procedure
Check the exit."
From the key figure I am using this info to populate value:
"/BIC/ZKF3 is not a valid key figures for InfoProvider 0QM_C08
Message no. BRAIN121
Diagnosis
Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZKF3 as the key figure to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08 or /BIC/ZKF3 references the key figure . In this case, the basic key figure l  is enough to calculate in the exit.
System response
/BIC/ZKF3 is ignored.
Procedure
Check the exit."
Any help would be appreciated.
This is my first time using Virtual KF's.
Thanks,
Brandon

Answer 1

Hi Ajay,
Here is my code:
      FORM user_0QM_C08                                            *
-->  L_S_RKB1D                                                      *
-->  C_S_DATA                                                       *
FORM user_0QM_C08 USING l_s_rkb1d   TYPE rsr_s_rkb1d
                     CHANGING c_s_data TYPE any.
*-- Local data
  DATA: l_n TYPE n,
        FIN1 like /bic/azqm_O5000-/BIC/ZPFINNT,
       FIN2 like /bic/azqm_O5000-/BIC/ZPFINNT,
       STAR1 like /bic/azqm_O5000-/BIC/ZPFINNT,
        STAR2 like /bic/azqm_O5000-/BIC/ZPFINNT,
        TASK type STRING.
*-- Field Symbols
  FIELD-SYMBOLS <ZNEWEST>.
  FIELD-SYMBOLS <ZOLDEST>.
  FIELD-SYMBOLS <ZPSTARNT>.
  FIELD-SYMBOLS <ZPFINNT>.
  FIELD-SYMBOLS <ZKF3>.
  FIELD-SYMBOLS <ZKF4>.
  FIELD-SYMBOLS <0NOTIFICATN>.
*->>> Initial checks
  SELECT SINGLE * FROM  zvir_reports
         WHERE  infocube  = l_s_rkb1d-infocube
         AND    compid    = l_s_rkb1d-compid.
  CHECK sy-subrc IS INITIAL.
*->>> Prepare the structure
  ASSIGN COMPONENT g_pos_0QM_C08_ZNEWEST
    OF STRUCTURE c_s_data TO <ZNEWEST>.
  ASSIGN COMPONENT g_pos_0QM_C08_ZOLDEST
    OF STRUCTURE c_s_data TO <ZOLDEST>.
  ASSIGN COMPONENT g_pos_0QM_C08_ZPSTARNT
    OF STRUCTURE c_s_data TO <ZPSTARNT>.
  ASSIGN COMPONENT g_pos_0QM_C08_ZPFINNT
    OF STRUCTURE c_s_data TO <ZPFINNT>.
  ASSIGN COMPONENT g_pos_0QM_C08_0NOTIFICATN
    OF STRUCTURE c_s_data TO <0NOTIFICATN>.
*~~~>Changeable
  ASSIGN COMPONENT g_pos_0QM_C08_zKF3
    OF STRUCTURE c_s_data TO <ZKF3>.
  ASSIGN COMPONENT g_pos_0QM_C08_zKF4
    OF STRUCTURE c_s_data TO <ZKF4>.
*do not go thru code if user fields are blank.
  IF <znewest> IS INITIAL OR <zoldest> IS INITIAL.
  Exit.
  Endif.
*-->>> Read general data
  CLEAR: /BIC/AZQM_O5000, FIN1, FIN2, STAR1, STAR2, TASK.
  TASK = 'SCM'.
get Start1 time
  SELECT /BIC/ZPSTARNT   FROM  /bic/azqm_O5000 INTO STAR1
         WHERE  notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZNEWEST      EQ <ZNEWEST>.
  ENDSELECT.
Get Finish1 time
  SELECT /BIC/ZPFINNT   FROM  /bic/azqm_O5000 INTO FIN1
         WHERE  notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZNEWEST      EQ TASK.
  ENDSELECT.
Get Finish2 time & Start2 time
  SELECT /BIC/ZPFINNT /BIC/ZPSTARNT FROM  /bic/azqm_O5000 INTO (FIN2 ,
STAR2)
         WHERE  notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZOLDEST      EQ <ZOLDEST>.
  ENDSELECT.
*- Update key figures
  <zKF3>  = abs( FIN1 - STAR2 ).
  <zKF4>  = abs( STAR1 - FIN2 ).
ENDFORM.                    "user_0QM_C08
Thx