Virtual PC 7.0.2
I have Virtual PC 7.0.2 running on an Emac with OSX 10.4.3.
I cannot log into Windows XP as I get the following message:
"The system cannot log you on now because the domain DomainName is not available"
Has anyone had this problem and found a way around it?
eMAC Mac OS X (10.4.3)
Since VPC and Windows are not Apple products, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups.google.com/groups/dir?sel=33607053> rather than an Apple forum.
Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you
Similar Messages
-
Problem with DNS and/or Virtual Host (works from inside, not from outside)
I am running several web sites (as virtual hosts) successfully on one Xserve (192.168.200), which are accessible internally and from the Internet (via forwarding port 80 on our firewall).
Now I am trying to add another web site (newmini.domain.com), which however is running on a Mac mini (also on the same subnet as the Xserve) at 192.168.100. What I did is make an additional entry under the Xserve's DNS for the domain (domain.com) (+ Machine..., pointing to 192.168.0.100). (I also made the necessary changes to the Mac mini's httpd and hosts configuration--no problem there).
Now, here's the strange thing: All computers on the subnet, whose DNS points to the Xserve, can see and browse newmini.domain.com fine. No problem. The computers ask the Xserve for the IP of the host in question, the Xserve says, "192.168.100", the request goes to the Mac mini, and it serves the web site as expected.
But this doesn't happen if the request comes from the Internet. Instead of seeing the Mac mini, the client sees the default web site of the Xserve... So it appears that somewhere, the virtual host part of the HTTP request is lost between our firewall and the Xserve.
Any ideas? Thanks.It's not going to.
You say you've setup port forwarding on the firewall. Port forwarding only cares about the port number (80). It knows nothing about the nature of the request (e.g. the hostname that the web request is for). Therefore all extenal connections on port 80 get sent to the XServe. The newmini doesn't see the traffic at all.
If you only have a single public IP address you can only forward port 80 traffic to a single machine. Your options are to either use a different port number, or configure the XServe to proxy the connection to the mini (so now the traffic goes router -> XServe -> Mini -> XServe -> router), although that might not do what you want since it still places load and dependencies on the XServe. -
Report issue on Virtual cube with services
Hi,
I'm following a how-to document to report on a virtual cube using a custom function module and everything seems to be OK except it is dumping at the following line which is included in the How To document "How Tou2026Implement a virtual InfoProvider with Services".
Both <l_s_data> and E_T_DATA are of same data types as discussed in the how-to document.
append <l_s_data> to E_T_DATA
These are the declarations which are same as HowTo document
E_T_DATA TYPE STANDARD TABLE
FIELD-SYMBOLS: <l_s_data> TYPE ANY.
Did any one face this issue. Greatly appreciate any insight into this issue. We are on BW 3.0B.
the dump i'm getting is ...
Data objects in a Unicode program are not convertible.
Error analysis
The statement "MOVE src TO dst" requires the operands "dst" and "src" to be comvertible.
Since this statement occurs in a Unicode program, the special convertibility rules for Unicode programs apply.
Thanks,
Hari Immadi
http://immadi.com
SEM BW AnalystHi,
In the debugging this is what I found out.. Any further insight?
Virtual cube has only 1 characteristic Z_CRNUM & only 1 keyfigure Z_SR
Report has only Z_CRNUM & Z_SR
<L_S_DATA> has following record & value
component type length contents
K____504 P 9 1.000
S____504 C 18 16EA4D-R
K____504 is the technical name of Z_SR in virtual provider.
S____504 is the technical name of Z_CRNUM in virtual provider.
E_T_DATA (type standard table) has following structure with a total of 5 fields.
S____504 K____504 &KEYEND 1ROWCOUNT Z_SR
Regards
Hari Immadi
http://immadi.com
SEM BW Analyst -
How Create Virtual Directory On Oracle Application Server 10g on RHEL 5
Dear Sir
i have deployed my application on OAS 10g on RHEL 5 ,,now since my application is calling some pro*c programs and then they generate some text based reports on fixed folder named
/treas/temp
now i simply have to open these text based reports on web browser
WEB.SHOW_DOCUMENT('/forms/pcreport/'||v_filename);
but for that i need to create virtual directory name : " /pcreport " without code
kindlly help as its working on my developer suit 10g i created a virtual directory in my application server by making following entry in "orion-web.xml" file
<virtual-directory virtual-path="/pcreport" real-path="/u/treas/temp" />
kindlly help(My paths shown, yours will be different)
In a text editor :
/u01/app/oracle/product/midtier/Apache/Apache/conf/httpd.conf
Add
Alias /pcreport/ "/u01/app/oracle/product/midtier/forms/pcreport/"
<Directory "/u01/app/oracle/product/midtier/forms/pcreport/">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Create the pcreport directory.
Add a simple test page
vi /u01/app/oracle/product/midtier/forms/pcreport/test.html
<html>
<head>
<title>Simple test page </title>
<style type="text/css">
body {
margin-left: 20%;;
margin-right: 20%;
border: 1px dotted gray;
padding: 10px 10px 10px 10px;
</style>
</head>
<body>
<p>test!</p>
</body>
</html>
Test
http://yourserver.com:7777/pcreport/test.html
Best Regards
mseberg -
Is there a way to create a virtual network using C# and the Azure SDK/API?
I don't see a clear way to create an Azure Virtual Network using the SDK.
I have all the methods to create the virtual network configuration, but no way to submit it:
IList<string> VirtualNetworkAddressPrefixes = new List<string>();
IList<string> LocalNetworkAddressPrefixes = new List<string>();
IList<NetworkListResponse.DnsServer> DNSServers = new List<NetworkListResponse.DnsServer>();
IList<NetworkListResponse.Subnet> Subnets = new List<NetworkListResponse.Subnet>();
NetworkListResponse.Gateway Gateway = new NetworkListResponse.Gateway();
IList<NetworkListResponse.LocalNetworkSite> LocalSites = new List<NetworkListResponse.LocalNetworkSite>();
IList<NetworkListResponse.Connection> Connections = new List<NetworkListResponse.Connection>();
VirtualNetworkAddressPrefixes.Add("a.b.c.d/cidr");
DNSServers.Add(new NetworkListResponse.DnsServer() { Name = "TestDNS1", Address = "a.b.c.d" });
Subnets.Add(new NetworkListResponse.Subnet() { Name = "Subnet-1", AddressPrefix = "a.b.c.d/cidr" });
Subnets.Add(new NetworkListResponse.Subnet() { Name = "GatewaySubnet", AddressPrefix = "a.b.c.d/cidr" });
Connections.Add(new NetworkListResponse.Connection() { Type = LocalNetworkConnectionType.IPSecurity });
LocalNetworkAddressPrefixes.Add("a.b.c.d/cidr");
LocalSites.Add(new NetworkListResponse.LocalNetworkSite()
Name = "On-Prem",
Connections = Connections,
VpnGatewayAddress = "a.b.c.d",
AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = LocalNetworkAddressPrefixes }
Gateway.Sites = LocalSites;
Gateway.Profile = GatewayProfile.ExtraLarge;
NetworkManagementClient netMgmtClient = new NetworkManagementClient(CloudCredentials);
NetworkListResponse netlistresp = GlobalSettings.mainWindow.netMgmtClient.Networks.List();
netlistresp.VirtualNetworkSites
.Add(new NetworkListResponse.VirtualNetworkSite()
Name = "TestVirtualNetwork",
AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = VirtualNetworkAddressPrefixes },
DnsServers = DNSServers,
Subnets = Subnets,
AffinityGroup = "East US",
Gateway = Gateway,
Label = "LabelValue"
I have also created the entire XML response and sent it to the NetworkManagementClient -> Networks.SetConfiguration() method, but it appears this command expects the virtual network to already be in existence. If anyone could give guidance, it would be
appreciated.Hi,
As discuss above , we have to create the XML response ,before that first you have to
GetConfiguration() details of existing virtual network.
string.format("@<NetworkConfiguration xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns='http://schemas.microsoft.com/ServiceHosting/2011/07/NetworkConfiguration'>
<VirtualNetworkConfiguration>
<Dns />
<VirtualNetworkSites>
<VirtualNetworkSite name=""{0}"" Location=""{1}"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-2"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite>",Networkname,location)+(@"<VirtualNetworkSite name=""demodsf1"" Location=""West Europe"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-1"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite> </VirtualNetworkSites>
</VirtualNetworkConfiguration>
</NetworkConfiguration>")
you have to append the node for existing node with new values , i got it its adding new virtual network
Best regards, -
How can I cancel the "Recreate All Virtual Dekstops" for a pooled collection in 2012 R2?
I currently have a system single-server installation of VDI, using 2012 R2 Standard as the server, using pooled collections of Windows 8.1. In general, everything works very well, but I've been searching in vain for ONE command. When
I make a change to the master template in Hyper-V, Checkpoint it, then go into the Remote Desktop Services, go the appropriate collection and initiate a "Recreate All Virtual Desktops", how would I cancel that?
It's happened on more than one occasion, where I make a change or an update to the template, and then push out the 25 new Virtual Desktops, and then the client comes back asking for a "little" change....but I'm stuck pushing it out until
all 25 desktops have been recreated. There must be a way to interrupt this process (probably leaving a few VM Desktops in an unstable state...which I don't care too much about as it's a pooled collection), update the template, and push it out again with
the "Recreate All Virtual Desktops". I do have the concurrency set so it recreates 5 at a time, but that noticeably impacts the users, and I don't want to just push out all 25 at a pop and interrupt everyone's work. Any ideas?
JHi,
Have you tried Stop-RDVirtualDesktopCollectionJob ? Something like below:
Import-Module RemoteDesktop
Stop-RDVirtualDesktopCollectionJob -CollectionName "PooledCollectionName" -ConnectionBroker "broker.yourdomain.com"
-TP -
How to load a virtual tour in Flash Catalyst ?
Hi,
I want to know if is it possible to load on FC 5.5 a Virtual Tour imported in .swf and created from Autopano Tour Pro.
example: http://fraize54th.free.fr/jardinAlex.html
I tried but I don't find any issue possible, if somebody could tell me if I can do this or I I have to give up !
Thanks
AlexHi Alex,
I wasn't able to make that SWF load from within an FC project, either. FC does support embedding of SWFs, but there may be some addional logic that sets this SWF up that doesn't function well when called from within another SWF.
This isn't a perfect solution, but you could have an FC button or action open an URL (where your virtual tour swf resided).
Good luck!
Nate -
Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine
I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
OIM 9.1.0.1 Installation stuck at "Finalizing virtual Product Data Registry
Oracle Database is installed on server and I will be connecting to that one while installing OIM
I installed WebLogic Server 10.3.3 on my machine,started Admin Server
Then I tried to install OIM 9.1.0.1.
But Installation is not getting complete.
Its stuck at this point.
Finalizing Virtual Product Data Registry
This Operation may take a few moments.Please wait.........
and below that there is a progress bar which is showing 100%
One more thing I would like to tell you that When I specify the location of jdk(i.e C:\Oracle\Middleware\jdk160_18), it gave me error
"The Selected JDK Version is not supported by Oracle Identity Manager"
Oracle isentity Manager may not function correctly if you continue installation with this unsupported version of JDK.
Do you want to poceed with this unsupported version.?
So I installed JDK 1.5 on my machine ,gave path of JDK1.5,It also gave the same error
Then tried with JDK 1.6,then SDK EE 1.6......but all gave the same errors.
So I finally I use the one came with WebLogic server i.e C:\Oracle\Middleware\jdk160_18
and on prompting of following error
"The Selected JDK Version is not supported by Oracle Identity Manager"
Oracle isentity Manager may not function correctly if you continue installation with this unsupported version o JDK.
Do you want to poceed with this unsupported version.?
I chosen YesWhat does the setup_weblogic.log says?
-Bikash -
Install R12 on a Virtual Machine hosted on Windows Vista
I wanted to install Oracle EBS R12.1.1 on Windows Vista Home Premium 64-bit but used to get .\jre\nt\1.6.0\bin\java error. Hussein Sawwan
helped and said that this is not certified. He adviced me to create a VMWare Server. Following is my experience. I hope it is helpful. Any
suggestions, additions are more than welcome. Thanks to all who helpmed me especially Hussein Sawwan, Helios, Gareth Roberts.
I used to get .\jre\nt\1.6.0\bin\java error after the installation would zoom through 33%. That was because my staging area was not correct. The staging area should be just next to c:\ or whatever be the root directory (or drive). No space or special characters in folder name. My current structure is as follows:
c:\r12stage. Under r12stage I have following folders and subfolders
oraAppDB -- 49 Disks
oraApps -- 11 Disks
oraAS -- 3 Disks (This comes from the Rapid Install Tools)
oraDB -- 5 Disks
startCD -- 1 Disk plus other folders. Just copy startcd from the unzipped download and paste to r12stage area.
I then created a virtual machine using VMWare Server (free download but need to register to get the serial number). Because I installed
vmware server on Vista Home Premium 64 bit Host OS, I have to boot my machine by pressing F8 and then select Disable Digital Signature
Enformcement. Thanks to Gareth Roberts for this tip. Create a vm and install Windows 2003 by selecting the .img file (first cd) by selecting Use ISO image and then path of the windows 2003 cd 1 (zipped file). start the virtual machine, that will install windows 2003 and then ask for location of 2nd cd. On the host machine, where the second win 2003 zip file resides, unzip the second zip file and name the folder as cd2. share this folder to the __vmware_user__ and from the virtual machine, map network drive to \\hostmachinename\cd2. Select this as the location of cd2 and complete the installation. Install MKS Toolkit from http://cygwin.com/ and visual c++ from Microsoft website. for information on this please refer to the following URL. Thanks to Muhammad Habib
http://mhabib.wordpress.com/2007/03/14/installing-oracle-applications-e-bussiness-11i-on-windows-xp/
After installation is done and Windows Update is run, share the r12stage directory on the host machine to the vmuser and launch rapidwiz.cmd from the command prompt and follow the instruction. For internet connection from the VM use Ethernet as NAT.
If the installation errors halfway through, clean up your VM by following instructions in document id 292424.1 in MetaLink. If you dont have access to Metalink then I summarize the steps briefly over here.
Launch the Registry Editor.
Navigate to the HKEY_LOCAL_MACHINE\Software key.
Select the Apache Group subkey and delete it.
Select the Oracle subkey and delete it.
Navigate to the HKEY_LOCAL_MACHINE\System\Current Control Set\Services.
Carefully select and delete each service beginning with Oracle. For example, delete "Oracle Apache Server PROD_<nodename>".
When you are finished, exit the Registry Editor.
Navigate to the Environment Variables editing screen according to your system setup. For example, right-click My Computer and select
Properties. From the Advanced tab, click the Environment Variables button.
Select the following system variables if created during the failed installation, and delete them: DISCO_JRE, DISCO_VBROKER, JSERV,
VBROKER_JAVAVM, VBROKER_TAG, WV_GATEWAY.
Select the Path variable, but do not delete it. Carefully edit it and remove any component with "Oracle" in the name, or that otherwise
references the failed install. For example, delete "E:\11.5.10\test\visora\8.0.6\bin;".
Save and exit System Properties.
Open a command window and navigate to the C:\Program Files\ directory. Delete the Oracle subdirectory.
If your Oracle Inventory directory was not C:\Program Files\Oracle\Inventory and was therefore not deleted in the previous step, locate it
and delete it.
Restart your machine
It is now safe to remove the Oracle filesystem that was partially installed during the failed installation. Go to the base install directory,
or top-level directory under which you installed either the Database Server (DATA, DB) or the Applications Tier Server (APPL, ORA, COMN)
directories, or both. Note that you may choose to rename a directory before you delete it. This allows you to use the same directory name and start a new installation even before you finish the delete filesystem operation. For example, if you placed your filesystem in a "test" directory under
"E:\11.5.10":
C:\> E:
E:\> cd 11.5.10
E:\> rename test oldtest
E:\> del /s /q oldtest
In another window:
C:\> cd <stage install directory>
Q:\> rapidwiz.cmd
After cleaning up if you still get error like RW-50004: Error Code received when running external process. Check log file for
details. Running database Install driver for VIS instance, after 13% complte step 1 of 5 then I suggest that you re-create the machine and follow the above steps again. Including installing win 2003, mks tool kit , vc++, etc. It will be a success.
Starting concurrent manager takes up enormous memory and slows down everything, so if you dont need it then dont ever start it. APPS password is apps and sysadmin user is sysadmin.
Good luck.
Mahesh AcharyaI had Vista 64-bit machine, installed Ubuntu in VMWare. Installed Oracle apps on 32-bit Ubuntu under VMware and was able to access Oracle apps. But, it is very very slow. It hangs sometimes and takes 15-20mins to display Ubuntu screens. Am I missing something here. I have a 4GB RAM and VMWare can not use all the 4GB. It may be using 2GB of 4GB. Am I missing something?
-
Creation of virtual directory for EPMA during 11.1.2.2 configuration
Hi Experts,
I was trying to install and configure the EPM 11.1.2.2 products on a POC machine with Windows 2008 R2. I was able to install and configure some products and i was facing issue with the EPMA configuration where it struck during "Creation of EPMA virtual Directory". I can see the virtual directory created but not sure why this is not finishing up and just struck at this level, deployment is all fine. Attached the config log for any reference
I have enabled Windows authentication in IIS 7 and disabled Basic authentication
Please let me know if anyone has come across this issue and thanks for your help
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01496] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] IIS version is 7
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01516] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Removing virtual directory: hyperion-bpma-server
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: removeVirtualDir
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01508] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating virtual directory: hyperion-bpma-server(2:2), configRoot: C:\OracleEPM\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer\WebService
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01504] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating application pool: DefaultAppPool
[2012-11-14T11:33:52.745-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createApplicationPool
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: Updating .Net version of application pool...
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: .Net version v2.0 will be used
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: updateApplicationPoolManagedRuntime
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01510] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Using default application pool for hyperion-bpma-server
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createVirtualDir
[2012-11-14T11:34:00.997-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: installAspDotNet
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [TRACE] [EPMCFG-07380] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.utils.os.windows.IisUtils] Getting IIS7 Default site name
RegardsWhy did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS -
How to get information about creation of a virtual machine on a Hyper-v host.
Hi,
How to get information about creation of a virtual machine on a Hyper-v host?
I need: host name, time created, creator user.
I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
Thank's in advance.
Denius ValiantFor Host Name * Created Time Use This Command In PowerShell
Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
and for Create User , As i know you should see on Event Log .
Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational
You can see in Event Log who create the Vm.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:
-
Bit Locker on windows 2008 R2 Virtual machine
Hello there !
We have a a number of Windows 2008 R2 machines and we wish to provide an encryption mechanism for each Virtual machine.
It's a VMware environment and all the VM files go into NFS drives.
Do you think , Bitlocker will help ?
Is Bitlocker supported on Virtual machines ?
In my opinion , Bitlocker is to safeguard against any "physical" threat to a machine.
But I wanted a second opinion here.
Please help me.VMs don't have a Trusted Platform Module (TPM) available to store the Full Volume Encryption Key (FVEK) used for BitLocker, but you can still use Hyper-V by storing the necessary information on a floppy drive. Use the command line:
cscript c:\Windows\System32\manage-bde.wsf -on C: -rp -sk A:
BitLocker is now enabled within the VM.
VMs don't have a Trusted Platform Module (TPM) available to store the Full Volume Encryption Key (FVEK) used for BitLocker, but you can still use Hyper-V by storing the necessary information on a floppy drive. Use the command line:
cscript c:\Windows\System32\manage-bde.wsf -on C: -rp -sk A:
BitLocker is now enabled within the VM.
Hyper-V Security How to: Use BitLocker to Protect Your VMs
http://blogs.technet.com/b/tonyso/archive/2008/07/01/hyper-v-security-how-to-use-bitlocker-to-protect-your-vms.aspx
for VMeare VMs you have to check with VMware and these links may help you
How to Encrypt VMware VM running Windows 2008 R2 with Microsoft Bitlocker
http://www.christowles.com/2010/10/how-to-encrypt-vmware-vm-running.html
http://www.networknet.nl/apps/wp/archives/395
Mohamed Fawzi | http://fawzi.wordpress.com -
Does Time Machine make complete backups of Virtual Machines?
I am new to the forums, so forgive me if this has been asked before.
I have a MacBook Pro and have VMWare Fusion 3 installed.
I have Windows 7 and XP installed as virtual machines, and use an external hard drive to back up into using Time Machine. I have been given conflicting information regarding the backups being created by Time Machine.
I have been told that I should use a Windows backup program such as Acronis to back up the Windows installations separately from the Mac backups on the separate hard drive.
Someone else has told me that if I use Time Machine, then the Windows installations will be backed up automatically, as the Windows installations are effectively folders and files within the Mac software.
Just to confuse things, I have read somewhere that Time Machine cannot back up Boot partitions of Windows installations, but I can't remember where I read this.
I don't want to lose my Windows installations through not understanding the backup capabilities of Time Machine, so I am hoping that someone here can advise me as to what the best course of action would be please.
Can I trust Time Machine to back everything up and to be able to restore my whole machine, including Windows installations, from a Time Machine backup, or do I need to back up the Windows virtual machines separately by using Acronis.
Thanks
Kevin1. TM will not backup a Boot Camp Windows volume.
2. TM will backup a VM disc image every time it changes unless you have excluded it via TM's Exclude list.
3. If the VMs change often then TM will backup each change thus consuming large amounts of space on the backup drive which is not recommended. Thus, it's best to backup VMs separately from within Windows using a Windows backup utility.
4. TM will not backup individual files and folders of a VM disc image. It will only backup the entire disc image. -
Failed to install windows server 2012 in virtual machine hosted in window 8.1
I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie -
Cannot log in to Windows 8.1 Pro virtual machine!
Hello.
I installed Windows 7 Ultimate on my iMac (Mid 2011) via Boot Camp, then I installed Parallels Desktop 8 and my Windows virtual machine was recognised by PD8. Then I upgraded my Windows version to Windows 8 Pro and added Windows Media Centre. All that was also recognised by PD8. Then I upgraded to Parallels Desktop 9, and everything was going fine.
I recently upgraded my Windows 8 Pro with Media Centre to Windows 8.1 Pro with Media Centre from the Windows partition, and I had no problem with that either. But when I tried to log in to Windows through Parallels Desktop (Windows as a virtual machine), Parallels Desktop didn't recognise the Windows virtual machine!
How can I resolve this issue?!
Thanks.Hi,
Did we followed this article to update to Windows 8.1 from Windows 8?
Update to Windows 8.1 from Windows 8
For can't find the update in the store, have you checked this article?
Why can't I find the update in the Store?
Please take a check in the question You might be running an edition of Windows 8 that doesn’t support updating from the Store
in the above article for the editions that won't be able to update from Windows store.
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
How to record the records deleted in a table
Hi Experts I want to run a report as a batch which should deleted the records which are sysdate - 60 and The report should log the number of records deleted from each table at End Of Run. Criteria for selecting records to be deleted are as follows: 1
-
i just want to be able to sync my ipod to my itunes so can have my music but my ipod isnt even conecting to the itunes because of this stupid (AMD) please help, i have the new 11.5 itunes just that will not install
-
Hello everyone, I'm using one counter timer from the DAQ card PCI-6014. I want to generate a pulse train with this output where I can control the number of pulses and the frequency of the pulse. The duty cycle is not important, I want to use the defa
-
Formatting of query returning multiple xml elements using xmlattributes
Hi, i've been tasked with producing output, based on an XSD, with repeating elements defined using distinct attributes related to the element. I've managed to get this working, but would like to make the solutions code more elegant than it is at the
-
Unable to connect to WiFi on 10.6.8
I just moved to a new apartment and have thus far been unable to connect to the WiFi here. After browsing these forms and Google and trying a good number of solutions that worked for others I'm left at a loss. I running a MacBook Pro 15" with OSX 10.