Virtual Server Operational Status

As a newbie to the ACE I was wondering if someone could explain the following behavior?
I am troubleshooting a connectivity issue where a Virtual Server has been setup associated with a ServerFarm.
The ServerFarm contains a single RealServer. This server has a Health Check via an SSL Layer 4 (443) probe.
When looking at the probe in ANM it says success. The ServerFarm in turn shows the server being probed with an Operational Status
of InService. If I then look at the Virtual Server associated with the ServerFarm it has a configured state of InService, but an Operational State of N/A
and a last polled of N/A.
I don't understand this as the RealServer is up via the health check, and the ServerFarm shows this, but the Virtual Server doesn't indicate this.
Can anyone share any insight as to how this works?
Thanks for your help in advance.

James,
It is possible that you are hitting bug CSCte12130. The stated work around is to reboot the ACE. However, you may want to open a TAC Case first.
Thanks,
Chris
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}

Similar Messages

Direct Access: DNS error on Operations Status (DNS server not responding)

Hi!
I am testing Direct Access on Windows 2012 R2 Standard. So far I have deployed the Remote Access role to our server "ABC-DA1". I have completed the configuration wizard for a Single NIC deployment and defined a FQDN as the "public name"
(da.domain.com).
After completing the wizard I go to the the Operations Status page and find the an error telling me one of the DNS servers is unavailable. The mentioned server is no longer operational as it was running on an old Win2k8R2 DC server that was demoted.
Is there a way to remove the reference to the old server? I have 3 new DNS servers running on the new Domain Controllers but it seems like the old DC did not completely remove itself.
Below is a screenshot of the operations status.
Thank you for your help :)

Hi,
Please go to the Name Resolution Policy and check if you can change the DNS server there.
Computer Configuration -> Policies -> Windows Settings -> Name Resolution Policy
Hope this helps.
Jeremy Wu
TechNet Community Support

Business connector server on Virtual Server

Hi,
Currently our 4.6 release Business Connector servers running on Windows NT Operating system. We would like to upgrade them to BC release 4.7 on Windows 2000 operating system on Virtual servers.
Are there any known issues/disadvantages if we install Business connector servers on Virtual Server rather than a Physical server?
These virtual servers will be in the same domain as that of SAP systems. Host names of the upgraded Virtual servers will be same as the current production BC hosts.
Thanks,
Srini

Technical Data
These functions are:
Changed, new, deleted
For Release
   Software Component
·        Component: SAP Business Connector (external)
·        Release: 4.7
Assignment to Application Component
BC-MID-BUS (SAP Business Connector)
Country Setting
Valid for all countries
Use
The following information provides you with an overview of the new features in SAP BC Release 4.7: It also tells you about incompatible changes that you need to know about before performing an upgrade.
SAP BC 4.7 is based on Integration Server 4.6 from webMethods. However, the SAP BC elements in Integration Server 4.6 have been redeveloped (see below for details).
Features
Additional Functions in SAP BC Developer
As well as SAP BC Administrator GUI, you can now use SAP BC Developer to perform typical development tasks. You do not need administrator authorizations in SAP BC Developer to do this. For example, with SAP BC 4.7 you can use SAP Lookup to generate elements for the Developer. This enables you to gather information about function modules, structures (tables), BAPIs and IDocs in an SAP system, and then generate outbound maps or records for these objects directly.
SAP BC Developer contains a new menu, SAP, which contains the following functions:
·        Look up a function module and generate an outbound map
·        Look up a structure definition and generate a record.
·        Lookup a business object.
·        Look up an IDoc and creating a Record.
·        Browser for Function Maps.
In addition, the Developer now also supports the following actions:
·        Generate an SAP inbound map if you want an SAP system to run a service in SAP BC.
·        Generate an SAP outbound map to execute a function module in an SAP system.
·        Generate a record based on an SAP ABAP Dictionary structure.
·        Generate a record based on an SAP IDoc.
SAP BC Developer now also supports a proxy bypass list. This means that you no longer need to define whether a connection runs through a proxy; instead, the bypass list performs this task.
New Public Services on SAP BC Server
pub.string:gzip
Compresses the specified input string and generates a check total (optional). For measurements or for statistical purposes, the lengths of the zipped and unzipped strings are provided as output.
·        pub.string:ungzip
Decompresses a specified input string, which was compressed with pub.string:gzip, and verifies the check total (optional).
·        pub.string:numericParse
Analyzes a number in accordance with a given number pattern.
·        pub.math:randomLong
Generates a pseudo random number and sends its string representation in a pipeline variable. You can use this number as a universal identifier with an acceptable level of security, as long as it is used in non-distributed scenarios and for a small number of variables.
·        pub.file:head
Shows the start of a given file.
·        pub.file:tail
Shows the end of a given file.
·        pub.flow:sleep
Puts the current service into sleep mode for the specified period (in seconds).
Restructuring of the WmPartners Package
The WmPartners package in SAP BC Server has been completely restructured and now offers the following enhancements:
·        Improved status information in the messages displayed in the Transaction Store and the Audit Log. This solves a range of problems, such as incorrect status information being displayed by IDocs.
·        Improved search and sort options for transactions in the file system of the Message Store. In the Transactions menu, SAP BC Administrator GUI offers you a new option, Message Store Query Settings, which enables you to select and delete transactions. In Release 4.7, the Message Store can also be displayed on separate pages, which makes it easier to edit large numbers of transactions.
·        Improved search and sort options for Routing Rules. In the Routing Rules menu, SAP BC Administrator GUI offers you a new option, Routing Rule Filter Settings, which enables you to restrict the number of routing rules that are displayed, and to sort the display. The filter accepts all combinations of characters, and the placeholders '*' (string of characters) and '?' (one character). This makes it easier to sort and search for routing rules, especially if you need to process a large number of communication partners and message types.
·        Forwarding the "Confirm Event" tRFC (triggered by an SAP system) to the next receiver (for the following transports: B2B Service, ALE (R/3 IDoc), and XML (only if another SAP BC is the receiver)) and triggering "Confirm Event" from an external client. Both of these cases can be significant if the final receiver is an SAP system. In this case, "Confirm Event" removes the transaction ID from the ARFCRSTATE table, which can improve system performance significantly when a large number of tRFCs are being processed.
Support for Distributed Statistic Records (DSRs)
SAP BC has supported the generation of DSRs since Release 4.7 DSRs enable you to monitor the performance of each SAP system and its components. In this way, you can check how much system load is produced by each individual component, and how many resources are being used. This enables you to identify "performance leaks" and optimize system performance.
The DSR support integrated in SAP BC also allows you to measure the total retention period of a process in SAP BC. To evaluate the DSRs, you require additional SAP software, including specific versions of the SAP Solution Manager, and the RFC Library. The exact requirements are still being defined.
The details will be published in SAP Note 620418. You can find a link to this SAP Note on the SAP BC download page at http://service.sap.com/sbc-download.
SAP BC Server Core Enhancements
·        Reverse Invoke
The reverse invoke protocol has been enhanced and now allows you to forward more information, such as IP addresses.
If, for example, an application fails because a connection is broken, and other working connections exist, the connection is checked using a ping.
From now on, the internal server can open or reopen a defined number of connections, if necessary.
A document is generated for any exceptions on the internal server.
·        Email Listener
New Features in the Email Listener
¡        Reprocessing of invalid mails for IMAP Server
¡        Processed mails selected as "unread" if they have not been deleted.
You can also specify whether mails with exceptions are deleted or not.
·        Update Manager
The Update Manager manages fixes and patches for the upgrade of an SAP BC Server. Previously , the Update Manager allowed a fix to set other fixes as obsolete, using the updateVoidList field in the update.cnf file of the fix. An obsolete fix is not shown in classpath, but up to now the Update Manager has not been able to give a fix in classpath priority ahead of this other fix. The Update Manager has now been enhanced to support these fix priorities: The update.cnf file in the fix now contains an updatePrecedeList field.
Incompatible Changes
SAP BC Delivery Without JVM
The Windows Version of SAP BC 4.7 is no longer delivered with a Java Virtual Machine (JVM). The SAP BC 4.7 Installation Guide describes the JVMs that are supported.
See also
For more information, see the documentation on the SAP Business Connector, under
·        http://service.sap.com/connectors (SAP Business Connector ® SAP Business Connector in Detail ® Documentation).

Exchange 2010 Initialization failed: The WinRM client received an HTTP server error status 500

Good morning,
I have major problems with exchange 2010 this morning.
First off, exchange stopped sending and receiving any emails- whether internal or external. We are running a server 2008 R2 domain and exchange 2010 is installed on a Server 2008 virtual machine.
I tried simply rebooting the server and then tried logging on and getting into the Exchange Management Console. I receive the following error in the exchange management console:
Initialization failed
The following error occurred while attempting to connect to the specified Exchange server 'exchangesvr.chs.internal';
The attempt to connect to
http://exchangesvr.chs.internal/Powershell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any
other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
I followed the steps listed here:
http://technet.microsoft.com/en-us/library/ff607221(EXCHG.80).aspx
but everything appeared to be correct. I did not have to make any changes because everything was set as it should be according to that information.
Any help would be much appreciated.
Best regards
Katrina

Hi,
I had the same problem, and I spent a weekend looking a solution, fortunally, I have it:
Please follow this steps:
Install WinRM IIS Extension, adding this feature from Server Manager.
Change  IPv4 over IPv6 lookup preference, because the FQDN fails to find the server on TCP/IPv6.
To verify this, on Command Prompt please make this test: ping yourserver.yourdomain.domain.
Maybe you obtain TCP/IPV6 address response.
Probably the Internet Information Services (IIS) Manager dont have the binding for IPv6, only for IPv4.
To change IPv4 over IPv6 lookup group prefence, follow this steps:
Please open regedit, locate the skubkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
On DisabledComponents subkey, double click, change de value for
0x20 (or 4120 Hexadecimal). this value make  the Windows OS to prefer IPv4 over IPv6.
Repeat the test, on command prompt:
ipconfig /flushdns (Enter) to flush DNS cache.
ping yourserver.yourdomain.domain.
At this moment you obtain TCP/IPv4 address response.
To check Exchange Managment Console operation, you must restart the server.
Please restart the server.
          Best Regards,

Blue screen error after converting physical to virtual server using disk2vhd

I have used the sysinternals disk2vhd to create the c: drive from a Dell server. I was able to create a virtual server and boot but had licensing issues. After a support call and doing a repair install to change licensing I am now getting a: "a process or
thread crucial to system operation has unexpectedly exited or been terminated" after the virtual machine boots and I log on. I tried to get the integration services installed but the server wouldn't stay running long enough.
Any suggestions for resolution would be appreciated.

Hi,
Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is very useful
for the further research. Please feel free to let me know if you have addition questions.
Best regards,
Vincent Hu

3750 Integrated WirelessLAN Controller: Operational Status:resetting

Hi there!
A customer has a WS-C3750G-24WS-S50 WLC-Controller with exactly 50 APs. But those 50 Accesspoints are never completely registered to the WLC. Mostly there are 48-49 accesspoints registered but never 50.
The WLC is losing them randomly. It is never losing the same Ap. When looking via GUI it says "All APs 50" , "Total 49".
First of all I thought that I have the following problem:
The 4402-50 controller supports a maximum of 50 access points and has two ports. To support the maximum number of access points, you would need to create two AP-manager interfaces (see Figure 3-15) because a 4400 series controller can support only 48 access points on one port.
But this is not for the 3750 Integrated WirelessLAN Controller, because you have LAG enabled by default and you cannot change this. Therfore you are not able to create a second AP-Manager interface.
So let´s forget about this.
Then I tried some things on CLI an I noticed the following:
sw-mr-01-01#sh platform wireless-controller 6
Wireless Controller in Switch 6
Operational Status of the Controller : resetting
Service VLAN                         : 4095
Service Port Mac Address             : 0025.8420.8e8f
Service IP Address                   : 127.0.1.6
Management IP Address                : 192.168.150.220
Management VLAN                      : 0
Software Version                     : 5.2.193.0
Keepalive Version(controller/switch) : 1/1
Keepalives Missed                    : 16
Controller accepts http/https        : 0/1
Controller's Status Line             : up
Watchdog resets of Controller        : 1
Controller resets total              : 0
Unacknowledged control messages      : 27
I guess it is not normal that the status is "resetting" although the WLC is running. I can work on GUI and CLI, so it is not really "resetting"
According to the Config Guide status should be "operational".
Is this maybe my problem? The customer is not able to do a good WIPT because the WLC is maybe resetting somehow internaly or something like this.
In traps I got every minute "Lost heartbeat with supervisor" which normaly should be solved in earlier releases. I have 6.0.199.4
HELP!!!
Thanks in advance.

Ok.
1) Assing an IP address for a subnet you are sure you don´t use. for example 192.168.200.5 /24; GW 192.168.200.1 (via WLC GUI).
2) I suppose (because I have not configured any 3750 WLC) that the service port uses the vlan ID 4095 (This is I saw in any capture). then you have to create a int vlan 4095 in the Switch and assing the GW ip address of your WLC service-port.
3) Ping to verify conectivity between devices.
I´m suppose you have the service port via DHCP (it could be the reason you have an IP 0.0.0.0), this is not a best practice; Cisco recommends that assing an IP to this interface and never let to DHCP, specially if you don´t have any dhcp server in this VLAN.
Good Luck and sorry for my english.
Best Regards.

Business connector on Virtual Server

Hi All,
I need a urgent help to know, if there are any disadvantages if we setup a Business connector environment in Virtual Server rather than a Physical server?
The situation is, currently I have business connector working on Physical server, for which a Warranty is reach end of life and no further support to the hardware is possible from the mother company.
Hence we have a plan of moving the Business connector in the physical server to a new virtual server provided by our infrastructure team as virtual servers are less costlier than physical server. Hence I would like to know how good to choose Virtual Server for business connector.
Also, do any one can suggest what is the best way of approach would be, to move the existing Business connector server operations to new hardware i.e. is it fine to do pure system copy and will it work? or else do I need to redo from installing the BC software and configuring it manually.
Thanks,
Bindu

Hi Bindu,
we are running all of our BC servers on VMWare images. Works perfectly. You are better off installing the BC from scratch and remember if you are installing it onto Windows XP or alike you should select the Windows 2000 compatibility mode both for installation as well as when running it. This will allow it to run just fine.
Be aware that BC 4.8 is due to be released soon and that will give you a supported, JVM updated version of BC for Windows and Linux. Currently all JVM versions are un-supported for previous BC versions.
If you use the same name and IP for your virtual server than what you had for the previous physical server you should not see any changes in your configs. Again, we have moved these from physical to virtual doing just that and it all worked well.
If you don't care about support at this point in time then you can also run the whole lot on a newer JVM, though if this is feasible or necessary is up to you.
Cheers
Kalle

DPS DSCC doesn't show operational status

I have DPS 6.3.1 running against 4 6.3.1 directory server instances. On the data sources page of DSCC, the 'operational status' column shows 'Could Not Retrieve Status' for all 4 instances. I've tried upping the log level on the DPS server to see if I could figure out what is causing this. Does anyone know how DPS (or DSCC) goes about figuring out what should be in that column?
Thanks

We don't have a single dscc for all instances. This is because of a strict 3 tier network architecture we are required to have (to the point that tier 1 dps is not allowed to talk directly to tier 3 ds so we have a tier 2 dps pass-thru). So are you saying that dscc in our tier 2 dps environment has to be able to talk to cacaoadm in tier 3 to show operational status of the ds on the dps screens? I was definitely under the impression that the monitoring as configured in dscc, has the dps instances monitoring the ds instances and the dps instances would let dscc know the status. To me, I don't care if dscc in tier 2 knows that the tier 3 ds instances are up, I want to know that the dps servers can talk to ds.

"Cluster is incorrectly configured on the virtual server." re-add server

Took a server out of a pool, then later went to re-add. /OVS/ mounts fine on the server, but when I go to VM Mangler, it throws the following errors:
"OVM-1011 Oracle VM Server sonorx3 operation HA Check Prerequisite failed: failed: <Exception: ha_check_shared_storage_mount failed: <Exception: srv('sonorx3'). failed! => <Exception: Cluster is incorrectly configured on the virtual server.> ."
In /var/log/ovs-agent/ovs_operation.log on the host that fails to join, I see:
"StackTrace:
File "/opt/ovs-agent-2.2/OVSXHA.py", line 99, in check_shared_storage_mount
raise Exception("Cluster is incorrectly configured on the virtual server.")"
What step is missing here?

I've tried re-doing ovs-makerepo.
Google doesn't know anything about the problem (other than this thread here, which it has already indexed).
What gives?

Increase disk size for virtual server

Hi,
A virtual server system drive is currently at 90%full. How to safely allocate more disk space to the system drive of that virtual server without causing issues to the installed Operating systems on that drive.
I read through the Virtual Iron documentation and nothing mention about increasing disk space for virtual server.
Thanks in advance for response.

Hi,
I was hoping to increase the virtual storage of the drive attached to virtual servers and not the actually physical storage.
I was looking around in it and found was able to increase the disk space by by editing the virtual storage disk.
I tested creating a new disk (5GB), increase the disk space(10GB) and login to virtual server and extend the new disk with the unallocated disk space.
It does seem to work and appear as 15GB.
I just concern if windows operating is installed on that disk, will it cause any issue if I extend it with the unallocated disk space?
Or it's safe to do so?
Many thanks.

PDF Preview: Accelerate Virtual Server Performance with All-Flash Storage

Maximum virtual server performance requires storage that accelerates virtual machine operation. Storage must also address the unique needs of applications running in the virtual environment. Learn how all-flash storage solves the I/O blender effect, find out what storage features are most important, and see how All-Flash FAS can deliver a rapid return on investment.

Saluting Mike, Would you please alsoa dvice how many enterprise users are running Epic on AFF8K? Tks by Henry PAN

Cisco ACS on Virtual Server

Hi,
I have a virtual server running ACS v4.1, when i try and authenticate against Active Directory i get a failed with the Failure-Code of "Internal Error".
Does anyone know if this is this a compatability issue?
Many thanks
Chris

Hi Chris,
Few things before troubleshooting. According to release notes:-
++++++++++
â¢VMware. ACS 4.1 was tested on the following VMWare platform:
-VMWare ESX server 3.0.0
-Processor-AMD Opteron Dual core
-# of Virtual machines-4
-Guest operating system-Windows 2003 Standard Edition
-RAM for each guest operation system-3 GB
Note The Microsoft JVM is no longer supported. ACS 4.1 supports the Sun Java Run-time Environment (JRE) 1.4.2_04. This is an ACS for Windows web client requirement.
Note ACS is supported on Windows Server 2003 R2.
+++++++++++++++++++++++++++++++++++++
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/release/notes/RNacs41.html#wp140886
+++++++++++++++++++++++++++++++++++++
'Internal error is a very generic error and to find out the real cause i need to check the logs from ACS. Auth logs, tacacs/raduis depends upon the authen method alon with time stamp
You need to make sure that ACS is installed on tested platform otherwise you will keep on facing unexpected errors.
Vinay

Vs2005 crsytal reports 10 not working propery in 2003 virtual server

I have a production application using asp.net version 2 and crystal reports 10. The system worked fine for a long time until they changed over from a sever running windows 2003 to a virtual windows server 2003 runing on a different machine. nothing has been changed other than the system now runs on a virtual server. My proble is that the crystal report viewer is now postioned about halway from its border ( vertically and it seems to render other buttons ( ie not crsytal reports controls but asp.net standard controls) in operable. It would appear as if the postback has not worked properly for some of the asp.net comtrol buttons.
This has worked fine for one year until they put the whole system on a virtual server. ANy help would be appreciated

Using a utility such as [Fiddler|http://www.fiddlertool.com/fiddler/] or [Charles|http://www.charlesproxy.com/] may help you in determining what is happening. [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] may also help, but I'd go for Fiddler or Charles first.
Ludek

Any IPlanet API to modify virtual server entry in server.XML?

Hi All,
I want to modify virtual server entry in server.XML to teach IPlanet the access and error log path for particular virtual server. Any API exposed by IPlanet to achieve this? if so pls let me know.
IPlanet version 6.1 on Solaris, scripting PHP/PERL
thanks in advance

Hi Manuel,
If you want to modify search results, you should develop a search post-operation plugin.
Bertold

The WinRM client received an HTTP server error status (500)

Hi All,
I have installed the Exchange 2010 Management Tools and a few roles on our DC (Windows Server 2008 R2) but i cannot even connect to it to configure anything.
If i use the management tools GUI i get an error message saying:
"Connecting to remote server failied with the following error message: The WinRM client received an HTTP server error status (500), but the remove service did not include any other informaition about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true'."
Using the Exchange Management Shell is get a similar error:
"Connecting to remote server failied with the following error message: The WinRM client received an HTTP server error status (500), but the remove service did not include any other informaition about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException
+ FullyQualifiedErrorId: PSSessionOpenFailed"
This comes up 3 times and then said it failed to connect and to enter the Server FQDN i want to connect to.
I have seen other posts where they have said to disable anonymous access for PowerShell in IIS which i have done and to also run the set-user yourusername -remotepowershellenabled:$true which i cannot run because i cannot even connect into it via PowerShell.
Tried to see if there was a way to reinstall the management tools because i have a feeling they didnt install properly but cant find a way to do that.
Tried to uninstall everything but i cannot because it says there are already mailboxes created (presume some default ones) but i cannot connect to remove them to uninstall.
I seem to have reached a wall and cannot see how to proceed.
Please help. Thanks.

Have you tried loading EMS via Admin Tools > Windows Powershell Modules? Amazingly, that will probably work fine for you.
Assuming that loads, or that you can run EMS on another machine:
Check Powershell directory in IIS on the problem server. Make sure SSL is not required. Allow only Anonymous access - no basic/IWA auth etc.
If you can get into Windows Powershell Modules, run the set-user command suggested above from there.
Remove-powershellvirtualdirectory, and then New-powershellvirtualdirectory (either remotely or using Windows Powershell Modules.
Re-check SSL/authentication once this is done.
-Max
Hi Max,
Tried loading EMS via Admin Tools > Windows Powershell Modules but didnt work. Got the following error:
Import-Module : There were errors in loading the format data file:
Microsoft.Exchange.Management.PowerShell.Setup, C:\Program Files\Microsoft\Exchange Server\V14\bin\Exchange.format.ps1x
ml : File skipped because it was already present from "Microsoft.Exchange.Management.PowerShell.E2010".
At line:24 char:34
+                     Import-Module <<<< $_.Name -ErrorAction SilentlyContinue
    + CategoryInfo          : InvalidOperation: (:) [Import-Module], RuntimeException
    + FullyQualifiedErrorId : FormatXmlUpateException,Microsoft.PowerShell.Commands.ImportModuleCommand
I think it is a problem with the PowerShell IIS VirtualDirectory because when i browse any other virtual directory i get a response of some sort but when i browse the PowerShell virtual directory i get the same 500 error message.
This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
Now i think i have made things worse. I was looking at the remove and new point you made an accidently deleted the whole PowerShell virtual directory in IIS using the IIS GUI. I didnt use the Remove-powershellvirtualdirectory command. Now i dont know how to get it back :(
When i try to run New-powershellvirtualdirectory and specify to call it PowerShell it says it is already
New-PowerShellVirtualDirectory : The virtual directory 'PowerShell' already exists under 'DC01.mainserver/Default Web S
ite'.
Parameter name: VirtualDirectoryName
At line:1 char:31
+ New-PowerShellVirtualDirectory <<<<
    + CategoryInfo          : InvalidArgument: (DC01\PowerShell (Default Web Site):ADObjectId) [New-PowerShellVirtualD
   irectory], ArgumentException
    + FullyQualifiedErrorId : 7833EE63,Microsoft.Exchange.Management.SystemConfigurationTasks.NewPowerShellVirtualDire
   ctory
I have tried to use the remove command but it doesnt find it no matter what i put in the identify parameter. It should be "Default Web Site" right?
Anyways, i have created a new PowerShell virtual directory called ExchPowerShell (still would like to find a way have it called PowerShell) and removed SSL and enabled only Anonymous access. Now get a different error message:
VERBOSE: Connecting to DC01.mainserver
[dc01.mainserver] Connecting to remote server failed with the following error message : The WinRM client sent a request
to an HTTP server and got a response saying the requested HTTP URL was not available. This is usually returned by a HT
TP server that does not support the WS-Management protocol. For more information, see the about_Remote_Troubleshooting
Help topic.
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed
Did a search and i think this is because i now had a different PowerShell virtual directory so if i try to connect and specify the new virtual directory name i get the same error i was getting.
Failed to connect to any Exchange Server in the current site.
Please enter the Server FQDN where you want to connect: DC01.mainserver/ExchPowerShell
VERBOSE: Connecting to DC01.mainserver/ExchPowerShell
[dc01.mainserver] Connecting to remote server failed with the following error message : The WinRM client received an HT
TP server error status (500), but the remote service did not include any other information about the cause of the failu
re. For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed
Thank for all you help so far.

Virtual Server Operational Status

Similar Messages

Maybe you are looking for