Virtual Wifi Miniport adaptor - Hostednetwork will not start

Hi, I'm trying to use a W520 with Thinkpad 1x1 11bgn Wireless LAN PCI Express half mini card to create a hotspot on the laptop itself. I'm trying to use a program called Connectify that handles the setup as a full Access Point. This will allow the other wifi devices to connect directly to the laptop wirelessly without a router.
The problem is that I can't activate the Thinkpad hostednetwork feature that is required for the inital setup. This is done through the Command Prompt text window. When I try to start the hosted network the error says the "group or resource is not in the correct state". I've got the latest wifi driver and a check of the driver says it supports hosted networks.
See http://www.wi-fiplanet.com/tutorials/article.php/3849841/How-to-Create-Wireless-Hosted-Networks-in-W... as an example.
Anyone else had success or otherwise?
W500 4063 34M T9600 2.8GHz, Bios 2.4, Win 7 64 Pro, 4GB RAM, ATI Radeon 3650 1920x1200, 500GB 7200rpm HDD
W520 4270CTO i7 2720QM, Bios 1.3, Win7 64 Pro, 8GB RAM, NV 2000M 2GB 1920x1080, 500GB 7200rpm HDD, Power Manager 3.62

Similar Messages

Microsoft Virtual Wifi Miniport Adaptor Driver Issue

Hi,
Got a brand new Windows 7 PC. Experienced one BSOD when searching network for other devices, and another flat out freeze when Windows Update asked me to restart. My PC under devices and printers showed that it needed troubleshooting. Windows identified the Microsoft Virtual Wifi Miniport Adaptor as the problem, suggesting a reinstall of the driver- to which it attempted, and failed. I have thus simply uninstalled this device from device manager. I expect Windows will find it again on reboot.
What is this adaptor, and do I need to worry about it? I'm connecting through Wifi with no problems, but I do plan to connect through a wire soon, once I can get hold of one long enough..
This is 64bit Windows 7, Core 2 Quad, 6gb RAM. I have added no new hardware.
Thanks
Ashley

I'm having an adapter issue too.
My 11 year old Dell laptop running WinXP easily connected to any wireless network even if it was 3 blocks away or further. And that is with a cheap Airlink101 usb wireless adapter I found online for 12.00 USD.
Now I purchased a Dell Inspiron 15R, running Windows 7 64bit, 4 gigs of ram, 500gb hard drive, with an intel wirless adapter and I am lucky if I connect to anything.
Now I will not throw my credentials out there and say "I am smart and you are stupid so this should just work" but I will say this: I started tinkering with computers back when the only choice for a home pc was a Radio Shack TRS-80, Atari 400 or 800,
or the Commodore 64, and some others. (I owned the Atari 800xl)
While I was not fortunate enough to attend a 4 year college, I did learn the ropes and ultimately attended a computer 'school' to get my professional diploma so I could get a job in some field. I started on the help desk and worked through different
departments, ultimately ending up in Information Security.
I will not pretend to be an expert but I do consider myself a skilled power user, or more specifically, a professional - paid - highly experienced - computer Ninja - of all computer areas.
So I will leave everyone with this, the WiFi functionality should simply work. Yes, there are hundreds of adapters and hundreds of millions of lines of code from thousands of manufacturers that work against this but this is not curing a disease.
I will not buy an Apple computer but this is why many folks jump the Windows ship, because they tire of banging their heads against the wall after paying 500, 600, 700, 800+ dollars for something that should at the very least get them on the internet.
This leads me to another question, how much should we consumers with our "grimy hands" spend to get something that works? Which laptop or home pc comes with a different/better wireless adapter then what we have? My understanding was that most peripherals
while manufactured by dozens of companies, still rely on a handful of common chips/chipsets.
I don't care how cheap the technology is, or how expensive. I have used cheap components and I have used expensive components. When running Windows 3.x, Windows 98, Windows XP, and Windows 7, and even Ubunto, or Sabayon linux distros, you always
find issues. Hence one reason why Apple likes to control their software by only installing on their hardware.
I don't see anyone on here blaming Microsoft. I am a proponent of Microsoft. Maybe even a die-hard, being a Zune HD owner and a Windows Mobile phone owner (crazy, right?). But people are here looking for a solution not a lecture.
So if somebody - be it Microsoft, Intel, or the driver signing authority, Dell, or whomever, can help then please do so. Please figure out why the 1 commonality here - Microsoft Virtual Miniport Adapter, seems to be related to this issue in some way.
We know it may not be your fault Miniport, but you sure aren't a poplular fella here!
Removing tongue from cheek...Done.

G4 iMac will not start normally

My wife's G4 iMac will not start normally. I have used the procedures from http://docs.info.apple.com/article.html?artnum=107393 and the "Disk Utility" on http://docs.info.apple.com/article.html?artnum=106214 to no avail.
When trying to start, a message comes up saying that the computer must be rebooted. Trying to boot in "Safe Mode" fails after an hour and shuts down the computer, and the "Disk Utility" runs for an hour or two and then gives a message that it was unable to repair the "minor error" on the hard-drive.
After force starting the iMac by holding the power button until the command line appears, I tried running fsck, but the commands are unrecognized. However, if I type in "mac-boot" at the command prompt, the iMac will start. I have copied all of my wife's photos, movies and music, and Word and Excel documents, etc. to my XP PC's hard-drive using USB flash drives.
My question is two-fold:
#1. I have heard that "Disc Warrior" is excellent at resolving hard-drive errors. Can anyone comment on "Disc Warrior" and is there anything else out there that someone can recommend?
#2. I bought RAM to bring the total up to one gig, so I was thinking of upgrading the hard-drive and installing Tiger on the new and larger drive while in the "Ball" changing the RAM. What is the maximum capacity hard-drive I can put into the G4 800mhz iMac without any problems and is there any particular model hard-drive that seems to work best?

I tried reading the link that you posted http://www.thexlab.com/faqs/kernelpanics.html but I don't have a disk with the "Apple Hardware Test".
Since I made the post that you replied to, things have gotten worse. I can no longer get onto the internal hard-drive. I have tried many different methods including the methods written about in the linked article you supplied. I can get onto the Installation CD and I can run "Disk Utility" from the CD. I have repaired the file permissions, but when I run "Repair Disk", it runs for about two hours and then suspends operations with a dialog box stating, "First Aid failed. Disk Utility stopped repairing Volume because the following error was encountered: The underlying task reported failure on exit." and then in the progress box after the list of addresses, there is a message:
(in red) Incorrect number of thread records
Invalid leaf record count
Invalid Map Node
Invalid directory Item Count
Invalid directory Item Count
Invalid volume directory Count
Invalid volume file Count
Volume Bit Map needs minor repair
Invalid volume free block count
Volume header needs minor repair
(in green) repairing volume
(in red) The volume could not be repaired
Error: The underlying task reported failure on exit
(in black) 1 HFS volume checked.
(in red) 1 volume could not be repaired because of an error
(in black) repair attempted on 1 volume
(in red) 1 volume could not be repaired.
I recently bought the 1/2gb replaceable RAM and the 1/2gb "Hidden" or "Factory Installed" RAM. I was planning on installing them soon. Since the "Disk Utility" is telling me that there are faults on the internal hard-drive and I have to go into the "Ball" to replace the "Hidden" or "Factory Installed" RAM, I figured that I might as well replace the hard-drive and redo the system.
Unless someone comes up with something I can do which will not cost me much money, I figure that I might as well install the RAM and a 120gb Western Digital Hard-drive that is about a year old, but was only used for a few days in an XP PC. Will the 120gb drive be recognized? I was thinking of partitioning it as 80gb and 40gb partitions. Does that sound good? I would install the OS on both partitions so that I could always boot if there was a failure.

Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
Updating the driver simply generates another Code 31 error.
Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows 8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

Have a C310a that will not start. Have +32VDC from Ac power adaptor, using on a Mac.

Have a PhotoSmart Premium e-All-in-One PrinterC310a, it will not turn on. We have been using it on an iMac and a MacBook, both OS X 10.6.7. Have been thru the HP resetting of the power adaptor etc, so I checked at the printer plug and had +32VDC, which is the correct input voltage. The printer still will not start, what am I missing?

zzzzip wrote:
Have a PhotoSmart Premium e-All-in-One PrinterC310a, it will not turn on. We have been using it on an iMac and a MacBook, both OS X 10.6.7. Have been thru the HP resetting of the power adaptor etc, so I checked at the printer plug and had +32VDC, which is the correct input voltage. The printer still will not start, what am I missing?
Hey zzzzip! I know its a basic question, but have you tried using a different outlet that you know works? Here is the document on troubleshooting power issues:
The HP Product Won't Turn On or Respond
If you have gone through all theses steps I would contact telephone support.
Regards,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HT201263 Help. My wife's iPad will not start up. I updated it two nights ago (Nov 12) to the latest IOS. It seemed to update normally. However, today it will not start or give any response. I tried to do a restore, but it will not let me do that.

Help!!!!!! My wife's iPad will not start up. I updated two nights ago to the latest IOS and today it will not do anything. It is charged and I've tried to access it through itunes to no avail.

From your text, it's difficult to determine if the problem lies with the iPad or the cable.
If the iPad still works, but you're having a problem with the sync, you may want to check all the cables and connections. If the iPad doesn't work (frozen or unresponsive), post and we'll go through the checklist together.

Bridging "Microsoft Virtual WiFi Miniport Adapter" not possible

Trying to bridge an "Microsoft Virtual WiFi Miniport Adapter" is not possible. There is
no such menu entry in "Network connections" context menu of the specified virtual adapter. Why? It absolutely make no sense why this shouldn't work. Is there any workaround to make this virtual adapter part of a bridge?
There was a suggestion using "bindbridge" tool, however I wasn't able to make it working.
http://stackoverflow.com/questions/17588957/programmatically-create-destroy-network-bridges-with-net-on-windows-7

Hi,
Why do you want to bridge an Microsoft Virtual WiFi Miniport Adapter? To share your network with other computers, please right click on the virtual adapter, select properties, and share an existing Internet connection with it. If you want to bridge to virtual
machine, you can set it with your virtualization software.
Andy Altmann
TechNet Community Support

Elements 11 , error U41M1C212, can not disable Microsoft Virtual WiFi Miniport Adapter

elements 11 update error U41M1C212, can not disable Microsoft Virtual WiFi Miniport Adapter
so, update unable.
System Win8

See the following, it might help you solve the problem:
http://dasongoh.blogspot.com/2011/12/how-to-fix-adobe-application-manager.html

Mobile phone Can't connect to the Notebook Microsoft Virtual WiFi Miniport Adapter

1. Create Microsoft Virtual WiFi Miniport Adapter
1.1 netsh wlan set hostednetwork mode=allow ssid=NETWORK key=password keyUsage=persistent
1.2. netsh wlan start hostednetwork
2. Connect Network Sharing--open
3. phone using wifi to connect the network
can't connect ,wha's wrong? notebook can surf through Ethernet connection.
If i set a static ip in the mobile phone which is the same net section like the Microsoft Virtual WiFi network, DNS:8.8.8.8 . Then can connected, but can't surf, anybody can give me some helps?
Ethernet connection:
1. ADSL dail mode
2. Static IP is setted
3. DNS is setted

Hi midource,
Please update your wireless network adapter driver for good measure.
Check your phone connection properties see if it could get IP address from your computer properly.
Static IP doesn’t mean your phone has connected to network, if you set static IP the connection will show connected but without internet.
This issue could be caused by incompatible hardware with Virtual Wifi Miniport Adapter hotspot, especially on some android devices.
But we still could do some configuration changing and give it a try.
Check properties of your adapter Ethernet connection->sharing, check “Allow other network to connect through…” and “Allow other network users to control…”
Tight click Ethernet connection-> properties->Advanced (advanced settings might be different depends on WIFI adapter manufacturer)
Disable 802.11n mode
Disable 40 Mhz Bandwidth Compatibility Mode
Run Netsh command you mentioned above as administrator.
Disable firewall temporarily.
Check your issue again after re-enable your Virtual Wifi Miniport connection.
If the issue still persists
Please try other devices on your Windows 8.1 Virtual WIFI Miniport Adapter hotspot. If they works check compatibility issue with your phone manufacturer or set a router for network sharing.
Regards
D. Wu

Device Manager in Win: Does Microsoft Virtual WiFi MiniPort Adapter Matter?

I'm a novice user just wondering about configuring devices in Windows 7 bootcamp partition.
My Apple iMac computer shows as a device in the Windows device manager with a yellow exclamation mark.
The driver is Microsoft Virtual WiFi Miniport Adapter.
The error is "device is not working properly because Windows cannot load the drivers required for this device. (Code 31)'.
Attempting to troubleshoot, by updating the driver doesn't solve the problem, as Windows can't automatically locate the driver.
However nothing seems to be actually functioning wrong - internet connectivity and wifi connections are stable and the partition is accessible.
I'm also using MacDrive 8 to access my Mac drives from Windows, again this seems to be working smoothly.
Can I just ignore this as one of the quirks of Bootcamp 3.2?
I have my PhD work on the Windows side so just wanting to be sure I can safely ignore the problem.
I've asked this question in the Intel iMac forum, wihtout any luck, just thought other Bootcamp users might be able to shine some light on the issue?
In detail:
Bootcamp; 3.2
Win OS: Windows 7 Enterprise 64-bit
Mac OS: 10.6.7
Computer: Intel Core Duo 3.06GHz 8 GB RAM
Installed Driver Date and Version: 21/06/2006 and 6.1.7600.16385

Hi,
If they remained after uninstall from device manager, run these commands with administrator privilege:
netsh wlan stop hostednetwork
netsh wlan set hostednetwork mode=disallow
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

MBP will not start, only has 99Mb free

Hello, I am trying to fix a friends Macbook Pro, which will not start. The logo appears with the spinning cog, but nothing else - it can stay on this screen for hours. I tried to reinstall Tiger, and then discovered that it only has 99Mb free, and Tiger needs more space.
I can access Terminal, but I am not familiar with UNIX to be able to do anything there. Is there a way of accessing the hard disk via my own iMac or wife's MBP through Firewire so we can delete something. I guess Target mode will not work, as there is not enough space to start the OS. Any help appreciated.
Our friends MBP is one of the original, 1.8Ghz Core Duo with 512Mb RAM.

The computer will probably still boot up in TD mode, Simon, even though it can't boot the Mac.
When used as the boot disk the computer needs plenty of free space to set up virtual memory areas and the like. That is one of the reasons why you should always make sure that there are always quite a few Gigabytes free for safe operation (Never let it get below 10% free space and try to maintain around 20% or more if, for example, you ever burn video, or other very large files).
TD mode essentially turns the computer into just another external HD, and the process occurs before it really needs to make use of the internal drive in the boot cycle.
So give it a go (just hold down "t" while starting the MBP). Your iMac should then see it as a second, external, HD.
Don't try and install any OS until you have cleared LOTS of space - 50 Gig or more in a situation like this where many of the files themselves will have become badly fragmented (because the normal OSX processes for defragging can't operate when a drive gets this full) . In fact I'd STRONGLY suggest that you back up or clone the entire drive to an external, or to another computer, wipe the internal, and only then start putting things back on. Otherwise you will have horrendous levels of free space fragmentation.
Cheers
Rod

Microsoft Virtual WiFi Miniport Adapter has red x

Wireless 802.11 wireless LAN Card and Microsoft virtual wifi miniport adapter have red x's. I right click to enable wireless network, and it tells me waiting for users.
I am attempting to use the mini for my laptop, but when I login or try to with my laptop it tells me the network is not available, which by looking at it, it obviously isn't. It shows up on the list, but tells me login failed.
I switched to share the wireless network connection on my pc and it still has the red x.
I disable the wireless 802.11 connection and it takes away the adapter (mini wifi) and makes it disabled with only two options showing then.
I have updated adapters and made the items active in the device manager. I do a check and it tells me the drivers are up to date.
I ran a diagnosis of the wireless network this is what it said:
Also I have the phsical little adapter that came with my pc that screws onto the back of the pc that I do have connected.
It worked prior but now i cannot get it to work at all.

Hi John,
I had the same problem where wifi connection suddenly drops and when i troubleshoot it says "Problem with wireless adaptor or access point".
But, after that my multi touch touchpad is not working :(<o:p></o:p>
So two problems for me now. Wireless issue and how can i get back my multitouch touchpad on my Asus K53S laptop.<o:p></o:p>
The wireless adaptor Atheros AR9285 wireless network adaptor. with that also MVWMA and Realtek PCIe GBE family controller.<o:p></o:p>
PLEASE HELP.
<o:p></o:p>
PS: I use Belkin n600db.
Darshan<o:p></o:p>

Problem with microsoft virtual WiFi Miniport adapter

Hi, I am Shakil Rahman. For last 4-5 days, the wireless interent connection has not been working. I have tried to figure out the problem with the aid of internet since I am not so efficient about computer. According to the information obtained from internet,
the problem is with microsoft virtual WiFi Miniport adapter and there is a 'Triangle symbol' (Symbol of attention) unlike Atheros AR5B93 wireless network adapter and Broadcom Netlink (TM) Gigabit Ethernet under the 'Network Adapters' title. In this circumstances,
how can I fix this problem to enable wireless connection? I would be grateful if you help me out.

Hi Shakil Rahman
You can try to uninstall your WIFI adapter driver in your Device Manager, then reboot your computer, the system will find and reinstall the driver automatically.
If there is no use, please contact your computer manufacture for further help.

HP TouchSmart application will not start

We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
HP TouchSmart Calendar has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
Reminder clock elapsed event is successfully fired.
CheckReminder() is executed successfully.
ShowReminder() is executed successfully.
After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
Cheers,
G

Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Virtual Wifi Miniport adaptor - Hostednetwork will not start

Similar Messages

Maybe you are looking for