VirtualBox Error with VT-x/AMD-V after suspend

I using virtualbox_bin 2.2.0-1 from the AUR and have noticed a really annoying problem that *is not related* to the virtualbox_bin package (I think).
When I suspend my Arch x86_64 box and then awaken it again,  VBox doesn't run my 64-bit guest VM and gives this error:
VT-x/AMD-V hardware acceleration has been enabled, but is not operational. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot.
Please ensure that you have enabled VT-x/AMD-V properly in the BIOS of your host computer.
I rebooted and entered my BIOS.  All my virtualization options are set to enable.  If I totally power down my system, then boot into Arch, the problem is gone and the 64-bit VM works just fine.  If I just reboot, the problem is not solved and the 64-bit VM does not work giving that error.  This problem starts when the machine gets suspended and then awakened. Upon waking up, the symptoms I described above occur and they survive a reboot!  Again, the only cure seems to be a power down then startup again (cold boot).
Can anyone suggest why this might be happening? Are they any logs I can look into to help trouble-shoot?
Here are two logs relating to pm:
pm-powersave.log
/usr/lib/pm-utils/power.d/sched-powersave false: **sched policy powersave OFF
success.
pm-suspend.log
Initial commandline parameters:
Sun Apr 26 08:13:55 EDT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux novelty 2.6.29-ARCH #1 SMP PREEMPT Fri Apr 17 14:14:28 CEST 2009 x86_64 Intel(R) Xeon(R) CPU X3360 @ 2.83GHz GenuineIntel GNU/Linux
Module Size Used by
ipv6 309664 16
cpufreq_userspace 3732 4
fuse 61136 4
joydev 12160 0
hid_microsoft 4116 0
usbhid 40288 0
hid 49280 2 hid_microsoft,usbhid
snd_hda_codec_realtek 255828 1
snd_seq_oss 33696 0
snd_seq_midi_event 7248 1 snd_seq_oss
snd_seq 56672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 7236 2 snd_seq_oss,snd_seq
snd_hda_intel 29352 1
snd_hda_codec 67696 2 snd_hda_codec_realtek,snd_hda_intel
psmouse 54764 0
snd_pcm_oss 43424 0
snd_mixer_oss 16880 1 snd_pcm_oss
snd_hwdep 8568 1 snd_hda_codec
nvidia 8116408 30
i2c_i801 10512 0
uhci_hcd 25360 0
ohci1394 32516 0
sg 29664 0
iTCO_wdt 13072 0
iTCO_vendor_support 3540 1 iTCO_wdt
pcspkr 2800 0
snd_pcm 81176 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 22688 2 snd_seq,snd_pcm
snd 66504 13 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
soundcore 7584 1 snd
snd_page_alloc 9728 2 snd_hda_intel,snd_pcm
ehci_hcd 39612 0
sky2 53364 0
ieee1394 88640 1 ohci1394
serio_raw 6132 0
i2c_core 24032 2 nvidia,i2c_i801
usbcore 161488 4 usbhid,uhci_hcd,ehci_hcd
intel_agp 30960 0
evdev 11616 8
thermal 18896 0
fan 5240 0
button 7312 0
battery 12504 0
ac 4984 0
acpi_cpufreq 8736 0
freq_table 4144 1 acpi_cpufreq
processor 44712 2 thermal,acpi_cpufreq
it87 27016 0
hwmon_vid 3696 1 it87
coretemp 7056 0
rtc_cmos 12056 0
rtc_core 20100 1 rtc_cmos
rtc_lib 2864 1 rtc_core
ext4 233096 2
mbcache 8148 1 ext4
jbd2 62912 1 ext4
crc16 1968 1 ext4
sd_mod 27528 6
sr_mod 16804 0
cdrom 37832 1 sr_mod
pata_acpi 5168 0
ata_generic 5908 0
pata_jmicron 3984 0
ahci 36128 4
libata 175468 4 pata_acpi,ata_generic,pata_jmicron,ahci
scsi_mod 117784 4 sg,sd_mod,sr_mod,libata
total used free shared buffers cached
Mem: 4045348 3801276 244072 0 1636308 1839996
-/+ buffers/cache: 324972 3720376
Swap: 2048248 0 2048248
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Sun Apr 26 08:13:56 EDT 2009: performing suspend
Sun Apr 26 10:05:28 EDT 2009: Awake.
Sun Apr 26 10:05:28 EDT 2009: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Sun Apr 26 10:05:29 EDT 2009: Finished.
Can anyone else out there who has a 64-bit VM give this a try and report back?
1) Verify that the 64-bit VM works
2) Suspend your host machine then wake it back up
3) Try to run your 64-bit VM again and see if you get the same result I do
Last edited by graysky (2009-04-26 16:28:49)

UPDATE: I just booted into Windows XP x64 edition and repeated this bug so it's probably not a Linux issue, it's either a problem with VBox, or with my system/Motherboard (BIOS).
Can anyone else out there who has a 64-bit VM (Windows, or Linux host) please give this a try and report back?
1) Verify that the 64-bit VM works
2) Suspend your host machine then wake it back up
3) Try to run your 64-bit VM again and see if you get the same result I do

Similar Messages

  • Help with bash script that fails after suspend to RAM

    I have a very simple reminder script that uses an endless loop, sleep and zenity to pop up a reminder every twenty minutes:
    #!/bin/bash
    while true;
    do
    sleep 20m
    zenity --warning --title="Ergonomics Reminder" --text="Check Posture or Have a Stretch!"
    done
    However, it does not work as it should after suspending to RAM. I am thinking I need to kill the process and restart it after every suspend, using a "thaw" notice in /etc/pm but if there is an easier way to do it please let me know!

    I'm doing this for 2 reasons:
    - as a scripting exercise
    - because the local repo is a shared wordpress mess and people forget to make commits so I'd like a local backup that includes all changes that may not be in github (sadly).
    Anyhow, thanks for the input about trap, I'm definitely confused by it's use at this point but have reworked the script without it.
    #!/bin/sh
    set -e #Exit on any error.
    TIME=`date +"%m.%d.%Y@%H:%M:%S"` # Define the TIME variable as today's date and time.
    MONTH=`date +"%b"` # Define MONTH as today's month.
    FILENAME="backup-$TIME.tar.gz" # Define the filename structure.
    SRCDIR="/stuff" # Define folder to backup.
    DESDIR="/Backup/$MONTH/" # Define the backup folder location.
    LOGFILE="$DESDIR/backup-$TIME.log" # Store the output in a log.
    REMOTE=$(git ls-remote -h origin master | awk '{print $1}') # Get commit hash from head of remote master repo (github)
    LOCAL=$(git rev-parse HEAD) # Get commit hash from head of server repo (dev/test)
    if [[ $LOCAL == $REMOTE ]]; then # If the hashes match
    echo "No update required." >> $LOGFILE # Then no pull is needed
    else # If the hashes don't match then prepare to run our backup
    mkdir -p $DESDIR # Create our directory if it doesn't exist.
    echo "Backup started for "$TIME >> $LOGFILE # Make it log what it's doing.
    tar -cpzf $DESDIR/$FILENAME $SRCDIR >> $LOGFILE 2>&1 # Perform the backup.
    echo "Backup Finished for "$TIME >> $LOGFILE # Log that it's finished.
    echo "Preparing for git pull " >> $LOGFILE #Log what we're doing.
    cd /stuff >> $LOGFILE 2>&1 # Make sure we're in our repo directory
    git pull >> $LOGFILE 2>&1
    echo "Git pull completed successfully. " >> $LOGFILE
    mail -s "Backup log `date`" [email protected] < $LOGFILE # Email the output to me.
    fi

  • Getting error with crawling Lotus Notes item after install SP1 and 2014 July CU

    We are using the SharePoint out of the box Lotus Note collector to crawl Lotus Notes, and it was work before I install SP1 and July CU.
    After I installed those patches, I got below error when crawling in crawl log:

    Hi,
    According to the error message, it says that SharePoint cannot find the Lotus Note addresses. So please check the content source for Lotus Note is correct.
    Reference:http://consultingblogs.emc.com/randyrempel/archive/2013/03/24/installing-and-configuring-the-lotus-notes-connector-for-sharepoint-2013-server-part-2-of-2.aspx
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • 'Filter' failed printing error with Quark and Xerox 7800 after upgrading to 10.9.2

    After upgrading to MAC OS X 10.9.2 from 10.8 I can no longer print from Quark 9.5.4 to a networked Xerox 7800 printer.
    Get 'Filter' failed error.
    Have deleted the printer and added it back several times but nothing has worked so far. Thanks for your help!!!
    Process:         pstoxrps [668]
    Path:            /Library/Printers/Xerox/Filters/pstoxrps
    Identifier:      pstoxrps
    Version:         ???
    Code Type:       X86-64 (Native)
    Parent Process:  cupsd [350]
    Responsible:     cupsd [350]
    User ID:         26
    Date/Time:       2014-04-01 12:39:57.100 -0500
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Anonymous UUID:  93027AFA-1CB5-0869-2634-CD8D5D806DDD
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    VM Regions Near 0:
    -->
        __TEXT                 00000001016c0000-0000000101718000 [  352K] r-x/rwx SM=COW  /Library/Printers/Xerox/Filters/pstoxrps

    Hope this helps:
    https://discussions.apple.com/message/25353260#25353260
    You can always try using the generic postscript and Generic PCL drivers as possible options

  • X1 with Dock 3.0 lan after suspend problem

    i have a X1 carbon with my dock 3.0.
    if i suspend the x1 lan disapears and in the system info give me a error Windows cant load drivers for lan.
    i have win 7 64 bits 

    i have a X1 carbon with my dock 3.0.
    if i suspend the x1 lan disapears and in the system info give me a error Windows cant load drivers for lan.
    i have win 7 64 bits 

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

    SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
    after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
    Thanks and Regards, Rangnath Mali

    Hi Rangnath,
    For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
    Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    when I launch Photoshop CC, I get an error message
    and what exactly is the text of that error message?

  • After Effects Error with Quicktime 7

    I upgraded to Quicktime 7 and now Adobe After Effects is causing audio errors. I cannot make a movie with audio without recieivng an error. I upgraded to Quicktime 7.02 pro, but no good.

    Same Error with After Effects 6.5.1 and QuickTime 7.0.3
    (On PowerBook G4, Mac OS X (10.4.3), 1024 MB RAM)
    AFTER EFFECTS ERROR: Opening File "%s" . sound
    channel - Can't open QuickTime handler (-2004).
    (10§65)
    Is there any alternate audio file format that might work - or does anyone think we need to reinstall an earlier version of QuickTime. According to Apple, QT6.5 is only compatible up to Panther - Mac OS X (10.3.9).
    There is also a Reinstaller to revert back to QT 7.0.1, but I don't know if that version of QuickTime is compatible with After Effects 6.5.1.
    Keep me posted. I'll keep trying.

  • Open CL errors with AMD Radeon HD 6750M, on Premiere Pro CC 7.0 and 7.0.1

    I am on a Macbook Pro early-2011 with a 1Gb AMD Radeon HD 6750M - I noticed this in Console, repeating constantly while loading Premiere as well as all throughout my edit session and export:
    MacBook-Pro.local Adobe Premiere Pro CC[770]: [CL_INVALID_OPERATION] : OpenCL Error : Failed to retrieve device information! Invalid enumerated value!
    Meanwhile in project settings my Video Rendering and Playback settings is happily set to Mercury Playback Engine GPU Acceleration (Open CL) - not greyed out like in CS6. Someone else mentioned having the same open CL errors but said it only occured when they updated to 7.0.1 - however, I have seen the exact open cl errors on both 7.0 and 7.0.1 (every string is identical except the "[770]" which can have other values like [270] or [1060] etc. I have graphics switching off and my AMD Radeon HD 6750M shows up fine in system profiler. I am worried there might be something wrong with it, but other than in Premiere CC, I am having no problems.
    Can anyone shed some light on this? Is it a bug? Is there any other info I can provide that would help clarify anything?
    I've spent way too many hours and late nights trying to troubleshoot but couldn't come up with anything, so any help would be more than appreciated!
    Thanks,
    Ronny

    Anybody from Adobe have any insight? Are you aware of this? I hope this is being looked into soon because I have a wave of TEDx HD videos to edit coming up in less than a week and just need some reassurance. Should I be worried?
    Maybe the problem is with Apple's Console not logging it correctly, since my Mercury (CPU) option is not grayed out and still selected.

  • Reinstalling AE and PP due to an error with dynamic link. Where do i find the program install? And tips on how to reinstall without messing things up? last question is, does my recent files and saves work after the reinstall?

    I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
    Where do i find the program install?
    And tips on how to reinstall without messing things up?
    last question is, does my recent files and saves work after the reinstall?
    Thank you

    karianne wrote:
    I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
    Where do i find the program install?
    Which versions? Which operating system?
    Try Download and Installation Help

  • Updated document about QuickTime errors with After Effects (re: H.264 and hyperthreading)

    I just updated "troubleshooting QuickTime errors with After Effects CS5, CS5.5, and CS6" with information about hyperthreading and Apple's H.264 encoder.
    The gist is that Apple's H.264 exporter component for QuickTime fails when the computer has a large number of CPUs.

    No, this applies to any QuickTime H.264 export. You can export H.264 in a QuickTime .mov wrapper out of AME, too, and it will have this problem.
    The various H.264 encoding presets (for YouTube, Blu-ray, Vimeo, iPad, etc.) don't use the H.264 QuickTime component, so this isn't relevant to them.
    This problem is just relevant to choosing Apple's H.264 as the video codec when choosing QuickTime as a format. This applies to all software that uses QuickTime, by the way, not just Adobe software.

  • Error with "Replace wtih After Effects Comp"

    When I use "Replace with After Effects Comp" on a clip in Premier CS5 (Mac), it sends the clip properly, I make my effect in AE (stabilize motion), save, then go back to premier and there is not change to the clip in premier (the change was clear and obvious in AE). In the lower right is a red circle wth an X -- clicking on it indicates "an unspecified error ocurred performaning an action" on the saved AE file.
    The clip in Premier is marked red and indicates it is linked to the AE file, but the applied effect has not come through, it just looks like the original.
    However, when I make other changes in AE, sich as adding text, no problem -- it updates in Premier.
    What could be preventing "Replace with After Effects Comp" from workgin with AE stablizie image tracking files?
    Using CS5 on a Mac (10.6.7) wiht the latest updater updates installed on all CS5 products)
    Really stuck here. Thanks!
    -August

    Can I not render wihin AE and have the rendered clip automatically link into Premier?
    This method should give you realtime playback of your Ae comp
    in the Pr timeline, but you will still have to render first.
    Use the "Post-Render Action" in the Ae render queue to import your
    completed render into your Ae project, then drop it into your
    composite as the top layer, solo that layer, then save and exit.
    Open Pr, and you should be able to play the composite without
    having to render the timeline... unless there is a deficit in the
    horsepower of your rig as Jim suggested in an earlier post.
    Post-render actions
    http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103a4f2dff7-79d5 a.html
    Here are some useful links courtesy of Todd Kopriva:
    Working with Adobe Premiere Pro and After Effects
    http://help.adobe.com/en_US/aftereffects/cs/using/WS4648B7F7-2D89-4765-BC8A-271D9A7574A3a. html
    FAQ: What is the best format for rendering and exporting from After Effects?

  • After Effects warning: Error with directory?

    Okay so recently I was having issues with text layers not displaying properly, and I posted here and found that the solution was to recreate my preferences file. However, since then I have been getting an error while starting AE that says "After Effects warning: Error with directory:
    C:\Documents and Settings\Brandon\Application Data\Adobe\After Effects\8.0\MediaIO". Is there a way to fix this without returning to old preferences file that gave me the original problem?

    And what happens, if you simply delete the error? The directory itself is not that important, as it merely holds presets and caches for Adobe Media encoder based formats (MPEG-2,WMF, etc.). AE should re-create it, if needed. Short of that, check the permissions on the folder as a starting point...
    Mylenium

  • I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

    I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

    What did the error message say?
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

Maybe you are looking for