Visibility issue with a sub report in Report Manager

I have a subreport in a List item. In the visibility property of the subreport, I have the following expression:
=IIF(Fields!X.Value = "A", "True", IIF(Fields!X.Value = "B", "True", "False"))
This is working fine for me in SSDT. If the value of field X is A or B the subreport does not display, but the subreport displays otherwise.
However, when I upload the report to Report Manager and run it the subreport will always display, even when the value of Field X is A or B.
Any suggestions for what I'm doing wrong, and/or how to fix or work around?. I've inserted Field X as a textbox into the List item, alongside the subreport, to ensure that the value is in fact A or B for the subreports that are displaying when they shouldn't.

I've tried making the change suggested by
PrajapatiNeha and then re-uploading the RDL to Report Manager. The visibility error is still occurring.
Thanks for your responses. I've downloaded the RDL from Report Manager, and located the appropriate code for the subreport. The RDL contains the following for the sub-reports visibility properties:
<Visibility>
<Hidden>=iif(Fields!Indicator_Group.Value = "Service Utilisation" Or Fields!Indicator_Group.Value = "GP Referred Services", True, False)</Hidden></hidden>
</Visibility>
I dont really have any experience with reading the XML code, but this appears to be ok?
If i set the visibility property to Hidden, then the subreport will not display for all records. But with the expression the subreport is still always displaying.
Thanks

Similar Messages

SSRS subreport with a sub-report as header on all pages

Hello,
I need some guidance on how to get a sub-report with a sub-report header and an expanding table. Please see below.
This is the structure of things that I have:
Main Report 1 is being invoked by ONLY Parameter 1 (User Text Box Entry).
It Contains:
     Page 1: Sub-Report 1 invoked by Parameter 1
     Page 2 or more Pages: Sub-report 2 and a table (T1) expanding vertically based on Parameter 1 and Parameter 2. The Sub-report 2 should appear as header on all pages where T1 rows are there. Additionally, multiple Parameter 2
values may be present and if so, they need to appear on a different page with appropriate header/table data. Parameter 1 and 2 are associated with a ONE dataset & its fields.
     Last Page: Sub-Report 3 and few text boxes below it. Invoked by Parameter 1
The issue is I don't know how to insert Page 2 content. I tried making a new report with Sub-report 2 and the T1 below it. This is working fine but I'm not able to get the sub-report as header on all pages EXCEPT the first page. FixedData and RepeatOnNewPage
properties are TRUE & KEEPwithGroup is set to 'AFTER'. Also, once I'm done with this report how do I insert it in the main report. Would it be in group / outside group in the group properties -- I would really appreciate if you can guide me with steps.
Thank you,
Nichesl
Nichesl

Thanks Asha ,
Actually this is how my Report layout is
Group Header
---Detail1
---Detail2
---Detail3
Group Footer1 (New Page After and Show at Bottom Setting)
Group Footer 2 (New Page Before Setting)
This is the layout of my report.
When Details and Group Footer1 come in same page then my Group Header works perfect.
When there are many details then the Group Footer1 skips into next page and Group Header does not show up in that page.
Our requirement is such a way that Group Footer1 should have Group Header and Group Footer2 should always come in new page (i.e. last Page)
I think I made it clear on my issue/requirement.
Again I really appreciate for your reply.
Regards
Kalyan

Issue with Exceptions in Reporting

Hi BW Gurus,
            I am still new to BW, Like I have a issue with exceptions in reporting.
            Let me explain clearly, I created a report which gives me two MRP values they are for example V1 and PD(there other MRP types but I am focusing only this two). Here I can see in my report those two values and the overall result of all MRP types (they are 6 different types). My report looks like this for examply
   V1                  46,782,434(this are rough figures)
   PD                  56,232,453
   Overall Result      102,434,111
        Here my requirement is I need to find this overall result like accroding to thresold values this overall result shows RED,YELLOW,GREEN.
        I have given threshold values in exceptions. like
   0           -
> 45,000,000(Red)
   45,000,001 -
> 65,000,000 (Yellow)
   65,000,001 -
> 500,000,000 (Green)
       But according to this values I should get Red( Overall Result), I cant see any change in the overall result.
       Please can some one give advice how to reflect this threshold values in my report.Or I have to select any other options in exceptions.
       Thanks in advance.
Regds
Sam

Not really possible with BEx functions, but if you provide a workbook to users you can just type in this information in a non-Bex cell and save the workbook.
Else you can try to name your exception such that it shows the value ranges. Then in the report, from the toolbar Layout > Display Exceptions.
Hope this helps...

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Converting a Crystal Report with Many Sub-Reports into CF Report Builder

I am trying to rewrite a Crystal Reports report which has 11
subreports in CF Report Builder. In the CR report, each subreport
has it's own report footer seciton. I have not been able to find
anything in CF Report Builder that allows me to do the same. Is CF
Report Builder capable of producing a report with multiple
subreports?

Having successfully created a report with 5 or 6 subreports
(with each sub-report containing a multiple sub-sub reports) I can
say with confidence, "Yes you can." However the real question you
should ask is, "
Should I create a report with multiple sub-reports in CF
ReportBuilder?" And the answer to that is.... NO, WHAT ARE YOU
CRAZY!
If you have something that works in Crystal Reports I would
suggest you stick with that. Otherwise you're setting yourself up
for a lot of headaches. Now maybe it was because I started using
the report builder that came with MX7, but it seems there are still
quite of few bugs that will leave you shaking your fist at your
computer. If however you do continue and do the CF Report Builder
route, be prepared for your application to crash unexpectedly, and
for many things to not work they way you expect them to. And if you
ever need help good luck. Take the fact that you had difficulty
finding good documentation as a sign of how little Adobe supports
this product.
CF Report Builder is fine for very simple reports, but don't
get fancy with it, you'll only regret your decision in the
end.

Copy doesn't work with embeded sub report in CR For Visual Studio 2010 SP2

Copy feature doesn't seems to work with embeded sub report content in CR For Visual Studio 2010 SP2. I am using a winform app .net 4.0. I am not able to select the individual fields in the embeded sub report . It always select the whole sub report and it is not copying anything. Please let me know how to enable the copy feature for elements in embeded sub report.

I understand your description. Let me do a quick test of this later on today and get back....
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Issues with ODI connection to Hyperion Financial Management

Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
Su

You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo

Printing Page Numbers With A Sub Report

Hi, I have a Crystal Report (XI) that includes a subreport which is identical to the main report because I am actually making the report print 2 copies of the same report with different critera in the detail section only. On the main report I have a Page Header section which I am using the special field "PAGE N of M", so on all pages of the report it is printing this page number. I My issue is listed below:
First page of report                    "Fred's Place"                 Page 1 of 2 (Correct)
Second page of report              "Fred's Place"                 Page 2 of 2 (Correct)
Third page of report                   "Fred's Place"                 Page 3 of 2 (Not Correct)
Fourth page of report                "Fred's Place"                 Page 4 of 2 (Not Correct)
The first/second page are printing correctly with data being pulled from the main report, but the third/fourth pages are not printing correctly with data pulled from the sub report. My question is how to get the third/fourth pages to print as follows:
Third page of report                   "Fred's Place"                 Page 1 of 2 (Correct)
Fourth page of report                "Fred's Place"                 Page 2 of 2 (Correct)
Thanks for your help
Jim Dyer

Jim,
Try passing the total page count from the main report to the subreport via a shared variable. Then set up a counter formula in the fake PH of the subreport and convert the counter and the shared variable so that it reads page 1(counter) of 2(shared variable)
You should also be able to suppress the extra pagenofms in the main report when pagenumber > totalpagecount

Hierarchy issue with Web Intelligence Report

Hi All,
We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
BEx query shows correct data in RSRT with hierarchy nodes.
We have built a Universe on top of this BEx Query.
We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
Please suggest, why such behavior with OLAP universe and how to resolve this?
Best Regards,
Ashish

Thanks for your suggestions.
I am little confused on how to check SQL generated for OLAP WebI Query.
But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
Do you know how WebI behaves with BEx hierarchies?
There has to be some setting to make it work...
Best Regards,
Ashish

Issue with printing lockbox report

Hi,
My lockbox report after processing file is giving the total amount and check amount correctly but when I print the same report, the figures don't match with the correct report figures for check amount and advice total.
Please help....
Thanks,
Sheel
Edited by: Sheel Ahuja on May 19, 2010 11:11 PM

Hello,
Please, open a message for SAP on the OSS Marketplace. There are some notes for this type of issue, but they are currently in pilot release.
So, open a message describing the issue and providing a reproducible example in your system.
REgards,
REnan

Issue with CRS Historical report scheduler

Hello guys,
I have a customer with ipccx 5.02 .
THe customer could execute manual reports but the scheduler reports doesnt work.
I follow the IPCCX troubleshooting guide :
1.Stop and start scheduler service.
2. Connectivity is fine.
I dont receivce any error from CRS client , i need little help im new in IPCC world?
Any suggestions please?
Thanks,
Carlos

Hi Anubhati,
PC is logged during the time that scheduled is programming and also is not in sleep mode.
I have download the CiscoSch log from CRS Historical report and i found i issue with license :
INFORMATIONAL Jan 19 2011|17:00:45 Authenticate [email protected]@default user on Application Server 10.181.55.247
104 ERROR Jan 19 2011|17:00:45 Getting of total available license info failed
105 ERROR Jan 19 2011|17:00:45 Historical Reporting Licenses Available(=0); Report cannot be generated.
I have the following license :
UCCX enhanced
IVR ports 150
Enhanced seat 22
CCX Maximum agents 300.
I generated a report for see how many agents is logged in = 15 .
Regards,
Carlos

Issue with exporting Financial Report in Smartview 11.1.2.2

If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
So the issue is only with the FR using Shared members.
Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
Thanks

Nope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
Thanks for your help John.

Issues with BI publisher report in dashboard

Hello all,
I got some issues about BI publisher reports in a dashboard.
I use a dashboard prompt in combination with a BIP report.
1.) I don't want to see the publisher control bar in my dashboard. Now you can't view the report anymore after using the dashboard prompt. Because it says you have to press the view button which is on the publisher control bar.
So when I add the bar. Then I have first to press on go in the dashboard prompt and after that I have to press on view in the publisher control bar.
2.) When I open my dashboard I see a scroll bar in my BIP report. Now when I use the dashboard prompt, it disappears. So I can't view the entire report anymore
3.) I like to develop in english, but the test must be in dutch. Now I have a english dashboard with a dutch control bar. Also logging in to BIP in english and then navigating to analytics will not help.
4.) I can't use I-bots on BI publisher reports, or can I?
5.) This is not really an issue, but more like a problem but I want that users can view the BIP report on the dashboard only in HTML, but I want that they only can export to excel, is this possible?
Hoping for some answers ;)
Thanks in advance!
Message was edited by:
Remc0

Hi Venkat,
Thanks for your quick respond.
1.) Auto Run is enabled. And the report runs automatically as well. But then it ignores the dashboard prompt (as a regular report would do as well). But when I choose some values in the prompt and then press go. Then it says I have to press on view as well.
2.) no that is not the case. My report is so big that it always need a scroll bar ;) also adjusting the size settings in the dashboard doesn't help. The only occurs when viewing in HTML, when previewing in excel or RTF it all just work fine.
3.) true, but ow well this is the least importetant one ;) so if this doesn't work, than it doesn't work ;)
4.) Ok, I will have a look on that.
5.) I did enabled HTML and EXCEL outputs in my BIP report. But when the first point is working, then I don't want to see the control bar anymore and I want to have the output on the dashboard in HTML and then I want to build a button, or a link or something that exports the request to excel. Is that possible?

How can I have Main report with a sub-report with in a sub-report??

I have a main report that has about 5 subreports, almost like a dashboard. I need to make one of those subreports contain another subreport.
I don't have the option to add a sub-report with in my sub-report, so what I thought would work is remove my sub-report from my main report, then add my new sub-report, then add that report back to my main report.
Everytime I add the sub-report that has a sub-report to my main report I lose the second sub.
From what I've read on the internet is you can't have a sub-report contain another sub-report. What some say is you can hyperlink that second sub report.
When I setup my hyper link to open the second sub-report I'm prompted to re-enter my report parameters.
Can some help me link a sub-report to a sub-report or show me how to pass a date range parameter in my hyper link so the reports just opens up?
I'm using CR IX R2
Thanks

Nate,
You are dealing with a product limitation. Crystal cannot have nested subreports within a sub report.
You can generally use shared variables between sub reports to achieve your desired result

Interactive report with detail sub-report on the same page

Hi all,
I'm fairly new to APEX, sorry if my question is too obvious. I'm using Apex 4.0.2 on top of Oracle 11.2.
I have an interactive report listing the content of a table. Since there are many columns in that table I would the report to show only a few identifying columns and the complete record currently selected being displayed using another report in a separate region on the same page.
The "Link Column" on the interactive report does almost that except that it jumps on another page; I would like to simply have a sub-report updated with the selected data instead of a new page displayed. Does anyone know how to do that?
Thanks for your help,
Chris

Chris,
this sounds like what I normally do in my referential data.
I use the wizard to create "form with report"
I make sure that both regions (the form and the report) will be set on the same page number
then I check/change the order of the regions (report first, form second)
then I set the form to display in column 2
regards,
Richard
P.S. the report only shows enough columns to recognize the records. the form shows all records

Visibility issue with a sub report in Report Manager

Similar Messages

Maybe you are looking for