Vista 'failed to start' software clash.

I have a Blackberry 7520 with Nextel and BlackBerry desktop software 4.2 SP2. There appears to be a conflict with the Vista OS. I've worked with Microsoft Tech Service for some time to isolate a "Failed to start" problem requiring recoveries on many occasions. I've performed several clean uninstalls and reinstalls of the BlackBerry software with no improvement. The computer is fine without the BDS, but has problems whenever it is installed. I really like the phone because it is very durable and I work in the field quite a bit, so getting a newer version is not an option (other field people have had durability problems with thier newer phones). Any ideas?

Hi,
Vista requires Desktop manager 4.5 in order to run.
Anything prior to that will to work.
Hope that helps!
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Similar Messages

Error: Windows Vista failed to start. A recent hardware or software change might be the cause

PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!

Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Microsoft Office can't find your license for this application - multiple copies of Office 2013 x32 failing to start, Software Protection Service timing out

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; I download; I start installer; installation fails unexpectedly; installer rolls back installation; hardware seems PC capable;

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; Safari browser=1, Itunes=2; Apple software updater=3; I download; I start installer; installation fails unexpectedly; installer rolls back installation; PC hardware seems PC capable; I have removed Mobile Me because of New Apple I-cloud Software Sync server registration?
What should I do with this failure to install Apple software products /declaring/ needing wanting to update and failing the process.
I have other software to complete the multimedia experience. what should I do with the constant automatic attempt to update
I can consult Gateway; device drivers web sites; hardware drivers;
Please Email Deanallen@ a*l.com
< Email Edited By Host >

Hi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support

When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards.

Vista itunes not installed correctly. Error 7. Windows error 998. Itunes helper not installed correctly. Service Apple Mobile Device failed to start. Insufficient privileges.

OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
Tristan

Upon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan

TS1567 Cannot download latest version of I-Tunes 11.1.4. It stops at the end with "Apple Mobile Device failed to start. Verify that you have sufficient privilege to start system services" never had a problem before. On Vista system. Come on Apple give us

tried to download latest I-Tunes 11.1.4 update but got the message re " Apple Mobile Device failed to start etc. Seems I am not the only one with this problem but getting frustrated as I have tried all the suggestions and now have no Itunes but plenty of money still on it. Why won't Apple admit they have a problem and fix it. There is no where to complain to them online. Help please

Hello PaulHeartattack,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
it may be necessary to remove all traces of iTunes and related software components from your computer before reinstalling iTunes.
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
If the Apple Mobile Device Service still will not start, this could be caused by third-party security software. Please follow iTunes for Windows: Troubleshooting security software issues.
Best of luck,
Mario

Lenovo 3000 N100, Services failed to start No internet connection, Win Vista H Prem SP2

Can not connect to the internet.
Control Panel>Network and Sharing Center   .. Below Sharing and Discovery "off "
Tried to connect wireless first. Network discovery is off. Clicked to turn on and apply..... it will not turn on? (still trying ) To end I had to use the task manager, to end program.
Connected a network cable to the laptop and fill out the wizard connection information.
       Still will not connect.   Restarted with network cable attached no connection.
Wireless Connection status, Radio off. Click on "Power on Wireless Radio" will not come on.
Also have some spooler issues, currently no printer installed. "The Dependency service or group failed to start."
Lenovo 3000 N100 Win Vista Home Premium SP2 32bit, system rating 3.1
I think this is all a services issue?
Suggestions?
After yet an additional restart "Connection Status: unknown The dependency services or failed to start."

Called into the Lenovo help desk for software, Rommel did diagnostic with me and it seem to be a virus. I have no services files running and no internet connection.
With no internet connection it's hard to get a service from Lenovo.
They are will to sell me a one time service for 89.00 and if it's considered major it would go to 129.00.
A one year service agreement would be 179.00 for 3 major and unlimited minor and they would on either of these send me a boot disk.
They did a great Diagnostic work I'm just not sold they can fix my problem.
On the command line   ping 127.0.0.1 gets me Unable to initialize windows Socket, error code 10107.
Looks like I dead in the water..........

Remote desktop administrator software failed to start

I just upgraded to the new ARD client and now I cannot start Remote Desktop Administrator. It says "The Remote Desktop Administrator software failed to start due to an unexpected error. The remote desktop software may not be installed correctly or the computer may require a restart."
Again, this happened after I install the ARD client update just released by Apple on my MBP 10.5.8.
I need to get ARD Administrator back up and running. How?

This is the most feedback I've ever gotten to any post.
After much trial and error here is the solution I came up with:
1. follow the instructions in the following link. Most importantly, make sure you follow the instructions on removing the 10.2 clients. I know that's not what we're dealing with here but it is necessary:
http://support.apple.com/kb/HT2577?viewlocale=en_US
2. Put the remote desktop Admin app in the trash and empty the trash.
3. Download and install the ARD 3.2.2 client via the following link:
http://www.apple.com/downloads/macosx/apple/application_updates/appleremotedeskt op322client.html
4. Reinstall the remote desktop administrative software in the Applications directory. (Actually, what I did was zip the ARD admin app, then trashed the non-zipped app and emptied the trash, then unzipped my zipped ARD Admin app and made sure the app was in the Applications directory. Didn't need to mess with the CD this way.)
5. Download and install the ARD Admin 3.3 update. It should now recognize that ARD Admin is installed on the computer and update it.
6. Try to launch the Admin app. It should work now.
I believe these are all the steps. After this I ran software update and it said I had no software to update. It looks as though the ARD Admin updater also updates the client software.

HT1926 I cannot connect my iphone to itunes. When I go through the troubleshooting, it tells me to uninstall and re-install itunes. BUT I do not have Apple Software Update or Quicktime to uninstall. It tells me that Apple Services failed to start!! Please

I go through all the motions in troubleshooting and uninstall Itunes, but I have not got Quicktime and Apple Software Update to uninstall. I then re-install Itunes but I get an error saying that 'Service Apple Mobile failed to start. Verify you have sufficient privileges to start'. Which I have. Please help!!

I have the same problem, did you find a solution?

Windows Vista firewall fails to start. Error 1068 The dependancy service or group failed to start

I have looked at the previous blog relating to this but the remedy hasn't worked
When trying to start the firewall all I get is security center can't turn on windows fire wall
I have gone into services and tried to switch on the firewall and get error 1068 the dependancy serice or grop failed to start
I followed the previous blog,
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BFE\Parameters\Policy
Right click the Policy key and choose
Permissions. ClickAdd and Enter
NT Service\BFE
Then click Check Names (the name will change to just bfe) and thenOk.
Click Full Control then Ok your way out.
Click Start - All Programs - Accessories - Right click Command Prompt and chooseRun As Administrator. Type (or copy the below lines and one blank line underneath and right click in the command prompt window and choose Paste).
sc start bfe
sc start MpsSvc
However i get the message
Start service failed error 1068
CAN ANYBODY HELP ME WITH WHAT TO DO?

1)Do u have a third party security software installed?
This could be due to that... What are the different virus scans you are already having.. there may be third party firewall or security product
which is interfering the windows firewall.. disable one by one your security scanners and try to up the windows firewall
(2)if you dont have such firewall product installed, this could be due to malware or some other problem...
if you have an antivirus solution, update it's definitions, and do a full system scan..
If you dont have a antivirus solution or your one is not working, use one of the recommended tools (use only one of
them at a time)
http://www.microsoft.com/security/scanner/en-us/default.aspx
And/Or
http://www.malwarebytes.org/products/malwarebytes_pro/
And/Or
http://www.simplysup.com/tremover/download.html (shareware
and can be activated for 30 days free)
And/Or
http://www.surfright.nl/en (shareware and can be activated for 30 days free)
And/Or
http://www.kaspersky.com/free-virus-removal-tool
if it is also not the problem, may be your firewall service is damaged..
(3) Open a command prompt run as administrator and type
sfc/scannow
(4)Try to repair the firewall service
Run the services repair tool by ESET
http://kb.eset.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
And/OR
Diagnose and fix Windows Firewall service problems automaticallyhttp://support.microsoft.com/mats/windows_firewall_diagnostic/en-us
(5)And/OR
Download and add this Windows firewall registry entry- https://www.dropbox.com/s/rdvziqlg4epaw9e/mpssvc.reg
(If you find any difficulty in adding this to registry refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html
http://blogs.technet.com/b/networking/archive/2011/06/14/the-windows-firewall-service-fails-to-start-registry-permissions.aspx
And/OR
open a command prompt using run as administrator
and copy paste these
Rundll32 setupapi,InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
and hit enter
(6)command prompt (run as admin), type
netsh advfirewall reset
and then press "Enter."

Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found". This error message is seen when first starting Windows Vista, prior to starting Photoshop Elements 12.

Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1
It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

Administrator software failed to start due to an unexpected error

Not a terribly useful message from ARD after a fresh install of 10.5.3:
"The Remote Desktop Administrator software failed to start due to an unexpected error."
"The Remote Desktop software may not be installed correctly or the computer may require a restart"
It installed something in the system on first launch then popped up with this message. My main concern is that it pooched my system in the process by replacing something new in Mac OS X 10.5.3 with something old from ARD 3.2...
Restarting now but who knows, might not be back for a while... %-\

Kill the "ARDAgent" program, either in Activity Monitor or Terminal, and it will start back up again. When you see it running again(make sure it's a new instance via the PID), you should be able to start Remote Desktop up without any problems after that.

My hp failed to start it says, A recent hardware or software change may be the problem.

my hp failed to start it says A recent hardware or software change may be the problem. It gives the option of Launch start up repair or Start windows normally, it freezes after clicking any option. What can i do?
My pc is a Compaq Presario CQ62-216DX Notebook. It also says on the screen, Description: fix problems that are preventing windows from starting.

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows failed to start. A recent hardware of software change might be the cause.

Hello,
Last night when I was finished using it for the day I went ahead and shut it down. Prior to shutting it down it was working perfectly fine. When I went to boot it up this morning, I kept getting the error that windows was unable to start normally and it took me to startup repair multiple times. I don't have the operating system disk (Windows 7) anymore I'm not sure if my computer just didn't come with a windows 7 disk. All I know is that I don't have it anymore. I tried basically everything I could find on the internet that was supposed to help with it and nothing works. I tried going into safe mode and using the command prompt, still nothing. It's now just showing up with a screen saying "Windows failed to start. A recent hardware of software change might be the cause. But like I said, this comes as a problem seeing as though I don't have my windows disc. I would really like to now if there is a way to fix this problem. I am requesting your help to fix this issue.

try to download and burn a copy of win7 from forums.MyDigitalLife.info
match your version and bits of windows
then run repair / Startup Repair 3x off the win7 dvd without letting it try to start into windows. rebuilds your partition tables and fixes a lot of things.
if that doesnt get you into windows... read up and run SFC /offwindir /offbootdir from the win7 dvd
you dont say much what you've tried .. i assume you tried from the F8 menu / startup repair / an older system restore date ?
You need the windows7 dvd !!!

Vista 'failed to start' software clash.

Similar Messages

Maybe you are looking for