Vista & webi java security window

Post Author: BrentGee
CA Forum: WebIntelligence Reporting
I just got a new computer with vista and when I try to use the java client to develop webi reports, the allow certificate window will not show. User is running as an administrator and has uac working. Any ideas to get that window up so that i can use the java client? the query builder & html versions work fine.

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
BrentGee,
You say that the user is running as an administrator, but does that mean an administrator on the workstation or the WebI account? If running as administrator on the WebI account, but not an administrator on the workstation, then that means that the user cannot install anything on the client unless using the administrator account. So, it would not be totally necessary to run as an administrator in WebI in order to trip something to load on the workstation. If running as an administrator on the workstation and still having a problem, then here are a couple of suggestions:
check to see which version of Java is loaded and ensure that it is no higher than 1.6
open up the Java Control Panel (JCP), via the Control Panel, and go to the general tab, then under "Temporary Internet Files", use the available buttons to clear the cache (aka Delete Files...)
As a last resort, navigate to the user's folder under "Documents and Settings" and locate the temporary Java folders (they usually start with a period (.), such as .java and .jpi_cache -- remove these, reboot the workstation and try again
If all of this does not work, verify that your current architecture is supported by Business Objects by visiting this site: http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp

Similar Messages

Java.security.PrivilegedActionException while invoking web service on OC4J

Hi,
I have a developed web service in Jdeveloper which is hosted on OC4J app server. I am able to invoke it properly and get results using the web service end point in browser window.
Now I created a java proxy for this WS in Jdeveloper and tried invoking it inside another web service. I get the following error while the 1st WS is invoked:
2010-03-09 17:15:04.607 WARNING Unable to connect to URL: <internal web service URL> due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
10/03/09 17:15:04 java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
10/03/09 17:15:04      at autoauthorise.runtime.VehicleTypeSpecsWSSoapHttp_Stub.getVehicleTypeSpecs(VehicleTypeSpecsWSSoapHttp_Stub.java:91)
10/03/09 17:15:04      at com.bt.vehtype.ws.VehicleTypeSpecsWSSoapHttpPortClient.getVehicleTypeSpecs(VehicleTypeSpecsWSSoapHttpPortClient.java:40)
10/03/09 17:15:04      at com.bt.fleet.willow.ws.AutoAuthorise.autoAuthorise(AutoAuthorise.java:20)
10/03/09 17:15:04      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/03/09 17:15:04      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
10/03/09 17:15:04      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
10/03/09 17:15:04      at java.lang.reflect.Method.invoke(Method.java:585)
10/03/09 17:15:04      at oracle.j2ee.ws.server.ImplInvocationHandler.invoke(ImplInvocationHandler.java:126)
10/03/09 17:15:04      at $Proxy0.autoAuthorise(Unknown Source)
10/03/09 17:15:04      at com.bt.fleet.willow.ws.runtime.AutoAthoriseWSSoapHttp_Tie.invoke_autoAuthorise(AutoAthoriseWSSoapHttp_Tie.java:62)
10/03/09 17:15:04      at com.bt.fleet.willow.ws.runtime.AutoAthoriseWSSoapHttp_Tie.processingHook(AutoAthoriseWSSoapHttp_Tie.java:161)
10/03/09 17:15:04      at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:287)
10/03/09 17:15:04      at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:356)
10/03/09 17:15:04      at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:283)
10/03/09 17:15:04      at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:272)
10/03/09 17:15:04      at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:94)
10/03/09 17:15:04      at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:128)
10/03/09 17:15:04      at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:170)
10/03/09 17:15:04      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
Please help, I cant see any problem.
Edited by: Ankit_Screen on Mar 11, 2010 6:27 AM

can't anybody help me?

Generated Web Service Client giving java.security.PrivilegedActionException

I generated a Web Service Proxy using jdev but when I run the client I get a hand shake error. I dont get this error in eclipse but happens when I try to run it in JDev. Is there some certificate setting or KeyStore setting I need to do to make this error go away:
Do I need to add the KeyStore or Certificate from the site I am accessing to oracle application server or jdeveloper... whats the procedure for that..
WARNING: Unable to connect to URL: https://mytest.test.com/WebService/MyTest_1.0/soap.soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11977)
     at project7.proxy.MyTestClient.echoOfficeLocation(MyTestClient.java:1276)
     at project7.proxy.MyTestClient.main(MyTestClient.java:38)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:174)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:150)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:176)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:113)
     at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11961)
     ... 2 more
Process exited with exit code 0.

hi Kimberly
It looks like you're getting some feedback in this forum thread:
"how do you add an existing certificate or keystore to jdev to access WS"
how do you add an existing certificate or keystore to jdev to access WS
regards
Jan Vervecken

Java.security.PrivilegedActionException in a web service proxy

Hello.
I have developed a simple web service with an oracle tutorial : http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
I have created the proxy to test it and i get the next error:
ADVERTENCIA: impossible to connect URL: http://localhost:8888/URJCWebServices-AudioStreamSerie1-context-root/AudioStreamSerie1SoapHttpPort debido a java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at audiostreamserie1proxy.runtime.AudioStreamSerie1SoapHttp_Stub.startTransmission(AudioStreamSerie1SoapHttp_Stub.java:95)
     at audiostream.AudioStreamSerie1SoapHttpPortClient.startTransmission(AudioStreamSerie1SoapHttpPortClient.java:41)
     at audiostream.AudioStreamSerie1SoapHttpPortClient.main(AudioStreamSerie1SoapHttpPortClient.java:29)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:174)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:150)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:176)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:113)
     at audiostreamserie1proxy.runtime.AudioStreamSerie1SoapHttp_Stub.startTransmission(AudioStreamSerie1SoapHttp_Stub.java:79)
     ... 2 more
What could be the problem? i have followed the steps of the tutorial.
Thank you.
Edited by: [email protected] on 17-abr-2009 1:57

can't anybody help me?

Java update (3 days ago) won't let me play yahoo games anymore. I've tried moving java security to Medium and adding web address as "permissive use". Still nothing. I'd really like a fix. Really, apple? What's your beef with yahoo games?

Installed Java update three days ago. Now, can't play yahoo games as it's now blocked by security settings. Already have tried moving Java security to Medium and adding yahoo.games.com (including web address of game) as a "Permissive exception". Also tried removing java and installing older version. Still nothing. Really Apple?!? What's your beef with yahoo games?

csnorth,
all of the older update versions of Java SE 7 can be found here. If 7u45 also didn’t work with your Yahoo! games, you can choose from any of the even older versions there as well.

Java Security Model for Web Apllication Security

Hi,
Any one can tell me about Java Security model used in web site protection. what are th eAPI's used to implement this model on Websites.
I am keen to know only about the Authentication and Authorization secutiry.
Thanks,
Vivek

Hi Ram, thanks for reply. I appreciate your comments.
This is a very interesting topic because we need to know how much flexibility we have in order to apply security policies to our services. After all, SOA is about flexibility (with appropriate level of control), isn't it? :-P
Option 1 (WSDL files) is a reasonable one. We could create "views" of the same service using ESB. But I'm concerned if this approach ("Security Oriented Views" of a service) can lead to difficulties in operational governance and appropriate discovery and reuse of the service.
Option 2 is also something to be concerned, as we could end up designing "Security Oriented Architecture" :-P
Option 3 (Customization through OAM) is also reasonable, but I don't know if this is really possible to achieve since OAM is mostly related to web resources. It would be nice if we had a chance to implement this in WSM instead.
Denis
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Security manager & mention "Java Applet Window"

A simple program that displays a frame with one button in it.
The frame displays, no problem.
When a security manager is added "System.setSecurityManager(new SecurityManager());"
and the program is run again a "status bar" is added at the bottom of the frame
mentioning "Java Applet Window".
Why is that, and can it be suppressed ? (I am working in JDK 1.4)
Any tip greatly appreciated

I was dealing with this myself and just discovered that the adding the following line to my security policy removed the message:
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";

Java Web Services Security with 10.1.2.1

I have developed a Java Web Service with J Developer 10.1.2.1 which was deployed onto Oracle 10.1.2.1 application server. Now I have to implement Security for this Web Service (similar to ws-security etc.,), how I can achieve Security with 10.1.2.1?
J Developer 10.1.3.1 seems to have the feature to implement Web Service Security, but a Java Web Service developed using J Developer 10 .1.3.1 with security enabled cannot be deployed onto Oracle 10.1.2.1 application server.
Please help as how I can implement Java Web Service Security with 10.1.2.1?
Email: [email protected]
Thanks for the help in advance.

You can use Oracle Web Services Manager to virtualize the end point and still implement WS-Security.
Thanks
Ram

Incompatibility among the authentication WEB-based and Windows Vista

I have a Wireless LAN Controller 5.0.148.2 and Access Points 1252 and 1231; the customer have 8 laptops with Windows Vista that they present problems when to get connected to the Guest's WLAN; these same ones do not present problems when they authenticate to Employee's WLAN through PEAP. The laptops with Windows XP do not present this problem.
The users that are connected to the Guest's WLAN then they obtain correctly the direction IP through DHCP; the Guest's users can not visualize the page find salutatory Web or when sometimes they visualize it, they introduce the username and password and next do not visualize the page accordingly, and they do not connect to the Internet.
Them laptops in mention come from different manufacturers ( HP and DELL ), Windows Vista's versions ( Home Basic and Home Premium ) and wireless cards ( INTEL and ATHEROS ).

I'm having the same problem with our student wireless. It uses web authentication and Windows Vista and Mac users are having problems but Windows XP works fine. They all get IP addresses but aren't getting presented with the login page.

Java web start security dialog with Java 7 update 51

I build a Java Web Start application signed with a valid certificate.
When I star the application the security dialog appear correctly as show in this figure
http://www.java.com/en/img/download/trusted_signed.jpg
My issue is about the "do not show again" checkbox.
If the attributes href are present in the jnlp tag of the jnlp file the checkbox appear.
If the attribute are not present, the checkbox doesn't appear and the run needs to be confirmed every time.
(Example:
<jnlp spec="1.0+" codebase=
"http://docs.oracle.com/javase/tutorialJWS/samples/deployment/webstart_ComponentArch_DynamicTreeDemo"
href="dynamictree_webstart.jnlp">
This is a problem because my jnlp file is under a password protected directory and if href is specifed, the Java Web Start application try to retrieve it as the other resources. ( result in access denied because only the browser session is authenticated and the run fails)
The documentation at Deploying a Java Web Start Application said:
The codebase and href attributes are optional when deploying Java Web Start applications that will run on at least the Java SE 6 update 18 release or later. You must specify the codebase and href attributes when deploying Java Web Start applications that will run with previous releases of the Java Runtime Environment software.
What is the right code? With href or without?
Is this a BUG or a feature?
How can I show the "don't show again" checkbox without having to specify the href attribute?

From the documentation at JAR File Manifest Attributes for Security
If the Application-Library-Allowable-Codebase attribute is present and matches the location from which the RIA is started, then a single host is listed in the Location field for the prompt and the option to hide future prompts is provided.
This issue is also discussed here: Java Web Start security dialogs with Java 7 update 51 - Stack Overflow

Java.security.AccessControlException when calling web service from applet

I have an applet that calls a webservce (Xmethods' delayed stock quote service). When I run the applet in appletviewer, I get the following:
[SOAPException: faultCode=SOAP-ENV:Client; msg=Error opening socket: java.security.AccessControlException: access denied (java.net.SocketPermission 66.28.98.121:9090 connect,resolve); targetException=java.lang.IllegalArgumentException:
Error opening socket: java.security.AccessControlException:
access denied
etc.....
My code works fine as an application, but not as an applet. (This was after I eventually had to extract the necessary SOAP .jar files into the same directory as my applet, but that's another topic...or maybe not?)
Help!
Regards,
John Kirksey

The default security settings does not give an applet to connect to any other server apart from the one from which it was downloaded. This is your problem. To mitigate that you have to change the security setting of the applet conatiner i.e the JVM in the browser.
Ironluca

Java Security Model: Java Protection Domains

1.     Policy Configuration
Until now, security policy was hard-coded in the security manager used by Java applications. This gives us the effective but rigid Java sandbox for applets.A major enhancement to the Java sandbox is the separation of policy from mechanism. Policy is now expressed in a separate, persistent format. The policy is represented in simple ascii, and can be modified and displayed by any tools that support the policy syntax specification. This allows:
o     Configurable policies -- no longer is the security policy hard-coded into the application.
o     Flexible policies -- Since the policy is configurable, system administrators can enforce global polices for the enterprise. If permitted by the enterprise's global policy, end-users can refine the policy for their desktop.
o     Fine-grain policies -- The policy configuration file uses a simple, extensible syntax that allows you to specify access on specific files or to particular network hosts. Access to resources can be granted only to code signed by trusted principals.
o     Application policies -- The sandbox is generalized so that applications of any stripe can use the policy mechanism. Previously, to establish a security policy for an application, an developer needed to implement a subclass of the SecurityManager, and hard-code the application's policies in that subclass. Now, the application can make use of the policy file and the extensible Permission object to build an application whose policy is separate from the implementation of the application.
o     Extensible policies -- Application developers can choose to define new resource types that require fine-grain access control. They need only define a new Permission object and a method that the system invokes to make access decisions. The policy configuration file and policy tools automatically support application-defined permissions. For example, an application could define a CheckBook object and a CheckBookPermission.
2.     X.509v3 Certificate APIs
Public-key cryptography is an effective tool for associating an identity with a piece of code. JavaSoft is introducing API support in the core APIs for X.509v3 certificates. This allows system administrators to use certificates from enterprise Certificate Authorities (CAs), as well as trusted third-party CAs, to cryptographically establish identities.
3.     Protection Domains
The central architectural feature of the Java security model is its concept of a Protection Domain. The Java sandbox is an example of a Protection Domain that places tight controls around the execution of downloaded code. This concept is generalized so that each Java class executes within one and only one Protection Domain, with associated permissions.
When code is loaded, its Protection Domain comes into existence. The Protection Domain has two attributes - a signer and a location. The signer could be null if the code is not signed by anyone. The location is the URL where the Java classes reside. The system consults the global policy on behalf of the new Protection Domain. It derives the set of permissions for the Protection Domain based on its signer/location attributes. Those permissions are put into the Protection Domain's bag of permissions.
4.     Access Decisions
Access decisions are straightforward. When code tries to access a protected resource, it creates an access request. If the request matches a permission contained in the bag of permissions, then access is granted. Otherwise, access is denied. This simple way of making access decisions extends easily to application-defined resources and access control. For example, the banking application allows access to the CheckBook only when the executing code holds the appropriate CheckBookPermission.
Sandbox model for Security
Java is supported in applications and applets, small programs that spurred Java's early growth and are executable in a browser environment. The applet code is downloaded at runtime and executes in the context of a JVM hosted by the browser. An applet's code can be downloaded from anywhere in the network, so Java's early designers thought such code should not be given unlimited access to the target system. That led to the sandbox model -- the security model introduced with JDK 1.0.
The sandbox model deems all code downloaded from the network untrustworthy, and confines the code to a limited area of the browser -- the sandbox. For instance, code downloaded from the network could not update the local file system. It's probably more accurate to call this a "fenced-in" model, since a sandbox does not connote strict confinement.
While this may seem a very secure approach, there are inherent problems. First, it dictates a rigid policy that is closely tied to the implementation. Second, it's seldom a good idea to put all one's eggs in one basket -- that is, it's unwise to rely entirely on one approach to provide overall system security.
Security needs to be layered for depth of defense and flexible enough to accommodate different policies -- the sandbox model is neither.
java.security.ProtectionDomain
This class represents a unit of protection within the Java application environment, and is typically associated with a concept of "principal," where a principal is an entity in the computer system to which permissions (and as a result, accountability) are granted.
A domain conceptually encloses a set of classes whose instances are granted the same set of permissions. Currently, a domain is uniquely identified by a CodeSource, which encapsulates two characteristics of the code running inside the domain: the codebase (java.net.URL), and a set of certificates (of type java.security.cert.Certificate) for public keys that correspond to the private keys that signed all code in this domain. Thus, classes signed by the same keys and from the same URL are placed in the same domain.
A domain also encompasses the permissions granted to code in the domain, as determined by the security policy currently in effect.
Classes that have the same permissions but are from different code sources belong to different domains.
A class belongs to one and only one ProtectionDomain.
Note that currently in Java 2 SDK, v 1.2, protection domains are created "on demand" as a result of class loading. The getProtectionDomain method in java.lang.Class can be used to look up the protection domain that is associated with a given class. Note that one must have the appropriate permission (the RuntimePermission "getProtectionDomain") to successfully invoke this method.
Today all code shipped as part of the Java 2 SDK is considered system code and run inside the unique system domain. Each applet or application runs in its appropriate domain, determined by its code source.
It is possible to ensure that objects in any non-system domain cannot automatically discover objects in another non-system domain. This partition can be achieved by careful class resolution and loading, for example, using different classloaders for different domains. However, SecureClassLoader (or its subclasses) can, at its choice, load classes from different domains, thus allowing these classes to co-exist within the same name space (as partitioned by a classloader).
jarsigner and keytool
example : cd D:\EicherProject\EicherWEB\Web Content jarsigner -keystore eicher.store source.jar eichercert
The javakey tool from JDK 1.1 has been replaced by two tools in Java 2.
One tool manages keys and certificates in a database. The other is responsible for signing and verifying JAR files. Both tools require access to a keystore that contains certificate and key information to operate. The keystore replaces the identitydb.obj from JDK 1.1. New to Java 2 is the notion of policy, which controls what resources applets are granted access to outside of the sandbox (see Chapter 3).
The javakey replacement tools are both command-line driven, and neither requires the use of the awkward directive files required in JDK 1.1.x. Management of keystores, and the generation of keys and certificates, is carried out by keytool. jarsigner uses certificates to sign JAR files and to verify the signatures found on signed JAR files.
Here we list simple steps of doing the signing. We assume that JDK 1.3 is installed and the tools jarsigner and keytool that are part of JDK are in the execution PATH. Following are Unix commands, however with proper changes, these could be used in Windows as well.
1. First generate a key pair for our Certificate:
keytool -genkey -keyalg rsa -alias AppletCert
2. Generate a certification-signing request.
keytool -certreq -alias AppletCert > CertReq.pem
3. Send this CertReq.pem to VeriSign/Thawte webform. Let the signed reply from them be SignedCert.pem.
4. Import the chain into keystore:
keytool -import -alias AppletCert -file SignedCert.pem
5. Sign the CyberVote archive �TeleVote.jar�:
jarsigner TeleVote.jar AppletCert
This signed applet TeleVote.jar can now be made available to the web server. For testing purpose we can have our own test root CA. Following are the steps to generate a root CA by using openssl.
1. Generate a key pair for root CA:
openssl genrsa -des3 -out CyberVoteCA.key 1024
2. Generate an x509 certificate using the above keypair:
openssl req -new -x509 -days key CyberVoteCA.key -out CyberVoteCA.crt
3. Import the Certificate to keystore.
keytool -import -alias CyberVoteRoot -file CyberVoteCA.crt
Now, in the step 3 of jar signing above, instead of sending the request certificate to VeriSign/Thawte webform for signing, we 365 - can sign using our newly created root CA using this command:
openssl x509 -req -CA CyberVoteCA.crt -CAkey CyberVoteCA.key -days 365 -in CertReq.pem -out SignedCert.pem �Cacreateserial
However, our test root CA has to be imported to the keystore of voter�s web browser in some way. [This was not investigated. We used some manual importing procedure which is not recommended way]
The Important Classes
The MessageDigest class, which is used in current CyberVote mockup system (see section 2), is an engine class designed to provide the functionality of cryptographically secure message digests such as SHA-1 or MD5. A cryptographically secure message digest takes arbitrary-sized input (a byte array), and generates a fixed-size output, called a digest or hash. A digest has the following properties:
� It should be computationally infeasible to find two messages that hashed to the same value.
� The digest does not reveal anything about the input that was used to generate it.
Message digests are used to produce unique and reliable identifiers of data. They are sometimes called the "digital fingerprints" of data.
The (Digital)Signature class is an engine class designed to provide the functionality of a cryptographic digital signature algorithm such as DSA or RSA with MD5. A cryptographically secure signature algorithm takes arbitrary-sized input and a private key and generates a relatively short (often fixed-size) string of bytes, called the signature, with the following properties:
� Given the public key corresponding to the private key used to generate the signature, it should be possible to verify the authenticity and integrity of the input.
� The signature and the public key do not reveal anything about the private key.
A Signature object can be used to sign data. It can also be used to verify whether or not an alleged signature is in fact the authentic signature of the data associated with it.
----Cheers
---- Dinesh Vishwakarma

Hi,
these concepts are used and implemented in jGuard(www.jguard.net) which enable easy JAAS integration into j2ee webapps across application servers.
cheers,
Charles(jGuard team).

Running ABAP program from web - java.lang.NullPointerException

Hi experts,
Need help. We have a web portal that one of the link is to call out a customized report to be displayed on nthe browser. There is a standard function to download the report by List -> Save/Send -> File. It seems that after we upgrade to ECC6/web dispatcher, this function failed to work. Our Basis has helped to check and they are highlighting that this is application side issue. They gave us the following:
Exception in thread "AWT-EventQueue-4" java.lang.NullPointerException: String is null
     at sun.java2d.SunGraphics2D.drawString(Unknown Source)
     at Query.paint(Unknown Source)
     at sun.awt.RepaintArea.paintComponent(Unknown Source)
     at sun.awt.RepaintArea.paint(Unknown Source)
     at sun.awt.windows.WComponentPeer.handleEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue$2.run(Unknown Source)
     at java.awt.EventQueue$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Frankly I really cannot understand this and also not sure how to solve it. Anyone have any ideas?

Hi All,
        I am also getting similar type of error
java.lang.NullPointerException
    at se.abb.com.View2.wdDoInit(View2.java:102)
    at se.abb.com.wdp.InternalView2.wdDoInit(InternalView2.java:202)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
    ... 34 more
Please help me to resolve this error.
Thanks
Uday

HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7

All -
I'm new to consuming web services in JDeveloper. I'm using Oracle JDEV 10.1.3.3/OC4J. I'm using this version since it is compatible with Oracle EBS 12.1.3. My intent is to pull data from our third party recruitment app (Success Factors) and load that data into Oracle HRIS. I'm already doing this through a .NET application. I'm converting it to be a Java Concurrent Program in EBS. The code listed below is a stub call to verify I'm on the right track. I created a JDeveloper Web Services proxy project. I'm testing it locally on my windows desktop. When I'm able to consume the service successfully, then I'll think about moving it to the EBS server.
I'm getting the following error when I invoke the following service:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
End point is: https://api4.successfactors.com/sfapi/v1/soap?wsdl
Any help/assistance would be much appreciated.
Below is my code and output of my test:
package emsc.oracle.apps.emscper.sfapi.proxy;
import HTTPClient.HTTPConnection;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSession;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSessionResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Login;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResult;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Logout;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LogoutResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFCredential;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFParameter;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Error;
import java.io.File;
import javax.xml.rpc.ServiceFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Date;
import javax.xml.ws.BindingProvider;
import javax.xml.soap.SOAPException;
import java.util.Map;
import oracle.security.ssl.OracleSSLCredential;
public class SFAPITest {
    // Declare members:
    private String companyId;
    private String userName;
    private String password;
    private String developerKey;
    private Date   effDt;
    private String greaterThanEffDt;
    private String lessThanEffDt;
    // Declare constants:
    final static private String breakLine = "+---------------------------------------------------------------------------+";
    final static private String format    = "yyyy-mm-dd";
    private enum ReqId {
        PrimaryReq(25),
        PrimaryReqCEO(26),
        EmCarePrimary(27),
        RTI(28),
        EmCareClinical(29);
        private int reqId;
        private ReqId() {
        private ReqId(int value) {
            reqId = value;
        public int getReqId() {
            return reqId;
    // Getters and Setters:
    protected String getCompanyId() {
       return this.companyId;
    protected void setCompanyId(String value) {
       this.companyId = value;
    protected String getUserName() {
       return this.userName;
    protected void setUserName(String value) {
       this.userName = value;
    protected String getPassword() {
       return this.password;
    protected void setPassword(String value) {
       this.password = value;
    protected String getDeveloperKey() {
       return this.developerKey;
    protected void setDeveloperKey(String value) {
       this.developerKey = value;
    protected Date getEffDt() {
        return this.effDt;
    protected void setEffDt(Date value) {
        this.effDt = value;
    protected String getGreaterThanEffDt() {
       return this.greaterThanEffDt;
    protected void setGreaterThanEffDt(String value) {
       this.greaterThanEffDt = value;
    protected String getLessThanEffDt() {
       return this.lessThanEffDt;
    protected void setLessThanEffDt(String value) {
       this.lessThanEffDt = value;
    public void runProgram()
        SFAPIService mySFAPIService;
        String CompletionText = "";
        String effDtStr2 = null;
    /* Code your program logic here.
    * Use getJDBCConnection method to get the connection object for any
    * JDBC operations.
    * Use CpContext provided commit,rollback methods to commit/rollback
    * data base transactions.
    * Don't forget to release the connection before returning from this
    * method.
    /* Call setCompletion method to set the request completion status and
    * completion text.
    * Status values are ReqCompletion.NORMAL,ReqCompletion.WARNING,
    * ReqCompletion.ERROR.
    * Use Completion text message of length 240 characters. If it is more
    * than 240 then full string will appear in log file and truncated 240
    * characters will be used as request completion text.
    try
        ServiceFactory factory = ServiceFactory.newInstance();
        mySFAPIService = (emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService)factory.loadService(emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService.class);
        SFAPI api = mySFAPIService.getSFAPI();
       /// SFAPI api = new SFAPI();
        //Map<String, Object> requestContext = ((BindingProvider) api).getRequestContext();
        //requestContext.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
        System.out.println("ServiceName => " + mySFAPIService.getServiceName().toString());
        System.out.println("End Point   => " + mySFAPIService.getServiceName().toString());
        System.out.println(breakLine);
        // Authentication: Login to SFAPI:
        SFCredential credential = new SFCredential();
        // Fake credentials being passed in for this post:
        credential.setCompanyId("XXX");
        credential.setUsername("XXX");
        credential.setPassword("XXX");
        credential.setDeveloperKey("XXX");
        HTTPConnection httpsConnection = null;
        OracleSSLCredential _credential = new OracleSSLCredential();
        _credential.setWallet("\\\\\\C:\\Program Files\\Java\\jdk1.6.0_33\\jre\\lib\\security", "ParkEstes3");
        /*System.setProperty("javax.net.ssl.trustStore","C:\\\\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\keystore");
        System.setProperty("javax.net.ssl.trustStorePassword","changeit");
        System.out.println(System.getProperty("javax.net.ssl.trustStore"));*/
        // SFParameter: Define a generic SFParameter List. This is a necessary parameter
        // to invoking calls in SFAPI:
         /*System.setProperty("javax.net.ssl.keyStore",
         "file:\\\C:\\jdk1.4.1\\jre\\lib\\security\\client.keystore");
         System.setProperty("javax.net.ssl.keyStorePassword","welcome");         */
        /* System.setProperty("oracle.net.wallet_location",
                      "(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=\\\C:\Users\dparrish\Oracle\WALLETS)))"); // (2)                     */
        File kstore = new File("C:\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\jssecacerts");
        boolean exists = kstore.exists();
        if (!exists) {
            System.out.println("Keystore does not exist");
        else {
            System.out.println("Keystore does exist");
        System.setProperty("javax.net.ssl.trustStore", kstore.getAbsolutePath());
        System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
        //System.setProperty("proxySet", "false");
        //System.setProperty("http.proxyHost", "127.0.0.1");
        //System.setProperty("http.proxyPort", "8080");
        System.out.println(kstore.getAbsolutePath());
        List<SFParameter> lst = new ArrayList<SFParameter>();
        SFParameter param = new SFParameter();
        param.setName("");
        param.setValue("");
        lst.add(param);
        SFParameter[] sfParam = lst.toArray(new SFParameter[lst.size()]);
        Login login = new Login();
        try {
            login.setCredential(credential);
            System.out.println("1");
            login.setParam(sfParam);
            System.out.println("2");
            LoginResponse loginResponse = new LoginResponse();
            LoginResult loginResult = new LoginResult();
            try {
                 loginResponse = api.login(login);
            catch (Exception e ) {
                System.out.println(e.getMessage());
            System.out.println("3");
            try {
                 loginResult = loginResponse.getResult();
            catch (Exception e ) {
                System.out.println(e.getMessage());
            System.out.println("4");
            IsValidSession vs = new IsValidSession();
            IsValidSessionResponse isValidSessionResponse = api.isValidSession(vs);
            System.out.println("5");
            if (isValidSessionResponse.isResult()) {
                 System.out.println("Session is valid");
                 System.out.println("Result => " + loginResult.getSessionId());
                 System.out.println(breakLine);
                Logout logout = new Logout();
                LogoutResponse logoutResponse = api.logout(logout);
                if (logoutResponse.isResult()) {
                     System.out.println("Logout of SFAPI Successful");
                else {
                    System.out.println("Logout of SFAPI Unsuccessful");
            else {
                 System.out.println("Session is invalid");
                List<Error> errors = new ArrayList<Error>();
                for (int i = 0; i < loginResult.getError().length; i++) {
                    errors.add(loginResult.getError()[i]);
                for (int i = 0; i < errors.size(); i++) {
                     System.out.println("Error Indice   => " + i);
                     System.out.println("Error Code:    => " + errors.get(i).getErrorCode());
                     System.out.println("Error Message: => " + errors.get(i).getErrorMessage());
                     System.out.println(breakLine);
                } // end for loop of SFObject errors
            } // end InvalidSession
        catch (Exception e)
             System.out.println("Session Credential Exception");
             System.out.println("Exception => " + e.getMessage());
             System.out.println(breakLine);
    catch (Exception e)
        System.out.println("Parameter List Exception");
        System.out.println("Exception => " + e.getMessage());
        System.out.println(breakLine);
    }   // end runProgram
    // Constructor:
    public SFAPITest() {
    } // end constructor
    public static void main (String args[]) {
        try
            SFAPITest test = new SFAPITest();
            test.runProgram();
        catch (Exception e) {
            System.out.println("main exception => " + e.getMessage());
} // SFAPITest
Here is the output with trace:
WARNING: Unable to connect to URL: https://api4.successfactors.com:443/sfapi/v1/soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
Session Credential Exception
Exception => ; nested exception is:
    HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
+---------------------------------------------------------------------------+
Process exited with exit code 0.

The other end is throwing back a programming error.
That might be because you are sending incorrect data and the other end fails to validate it.
You might be able to guess based on your C# code. But, since you are using soap one generic solution is available to you.
- Get an http proxy interceptor like wireshark.
- Run it while your C# app runs, collect the http requests from that.
- Run it while running your java code, collect the http requests from that.
Compare the two.

The loading of OPSS java security policy provider failed due to exception

Hi,
The issue is execution of startWebLogic.cmd failed,once shutting down the system and restarting it.At first time,after the installation ,it worked and I was able to log in to web logic server.I also created boot.properties file with user name and password for web logic server in user_projects/domains/UCM_domain/server/admin server/security folder.
The operating system is windows xp, with 32 bit,oracle web logic version 11g, and UCM version 11.1.1.4.0.
the error log is:
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based farm keystore failed.
     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:351)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:101)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
####<Aug 10, 2011 4:18:13 PM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293797> <BEA-000365> <Server state changed to FAILED>
####<Aug 10, 2011 4:18:13 PM IST> <Error> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293797> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Aug 10, 2011 4:18:13 PM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293812> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Aug 10, 2011 4:18:13 PM IST> <Info> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293828> <BEA-000236> <Stopping execute threads.>

Thanks René van Wijk for the reply.
I tried the action u replied for my question, but the same error again continued.iam unable to login in admin server.
The main error is **Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider**
**     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)**
the message in the error log is
<BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based farm keystore failed.
     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:351)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:101)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
####<Aug 11, 2011 11:09:57 AM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000365> <Server state changed to FAILED>
####<Aug 11, 2011 11:09:57 AM IST> <Error> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Aug 11, 2011 11:09:57 AM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Aug 11, 2011 11:09:57 AM IST> <Info> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197218> <BEA-000236> <Stopping execute threads.>

Vista & webi java security window

Similar Messages

Maybe you are looking for